Windows 8.1 RDP Issues with Windows Server 2008 Standard.
I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?
Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Similar Messages
-
Upgrade to Windows 8.1 Pro from Windows 8 Pro causing issues with Remote Server Administration Tools
Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
ThanksSeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet -
Remote Desktop Connection certification issue with Win Server 2008 R2
When connecting to Windows 2008 server R2, from Windows 7, Vista and Mac OS 10.6.7 via Remote Desktop Connection, i am getting a 'Server Name on the Certificate is Incorrect' error.
if i click connect, i can still connect to the machine, due to a 3rd party managing the server, this doesn't look very professional on my part...
The server is a standalone machine and is not currently on a domain. RDC is only used for management purposes.Hi,
This certificate error is normal, because your client do not trust the certificate which is installed on the terminal server. To avoid this issue,
you can export the certificate and import this certificate into the client side (computer account).
Thanks. -
Weird issue with Windows Server 2008 R2 Print Server
I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.
Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
CarlosHi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos -
Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0
Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom
You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right? -
Major Issues with Windows XP and Sound Blaster Audig
As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM
Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card.... -
SVCHost NetSVCS On Windows Server 2008 Standard memory leak with windows update
I have a particular situation that has surfaced lately. I have a series of Windows Server 2008 Standard. I have applications that use WMI to do application interfacing. For years this has been running fine until recenly in the last month
I have seen memory being swallowed by the process SVCHost Netsvcs. I have done significant research into this. The problem appears almost like clock work on a daily basis. I have traced this to windows update which seems to kick off, it is
also using WMI, it starts and seems to get lost then netsvcs starts running off until all memory is consumed and the svchost process eventually fails. At that point I can get back into the system to view it. If I catch it in time I can simply stop windows
update but sometimes I have to take the drastic and unsafe measure to kill that particular svchost process.
There are a lot of threads regarding SVCHost and nothing comes remotely close to this issue as far as I can see.
I have allready ensured that windows update is up to date.
At present I am forced to ensure that windows update is disabled. I then have to manually shut down the other services that are using WMI to do an update. This means down time for my applications realtime updates.Hi,
does this issue occur on a single server or multiple servers? And is it server 2008 or 2008 R2? (if 2008R2 there is a
hotfix
available which would seem a good fit for your current issue).
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :) -
OS 10.7, SMB Connection, Change to Unicode with Extended Security on Windows Server 2008 Standard
Hi All, I've searched Google, and I've also contacted Apple Support with no luck: I want to implement unicode with extended security on Windows Server 2008 Standard server shared folders so that Lion can connect normally (i.e. Finder->Go->Connect to Server->IP Address or server name) to SMB shares and access files. I'm lacking information; has anyone actually implemented unicode with extended security? If so, how?
Thanks in advance.
TomThanks for the reply aorlich. Do you mean enable file sharing on my Mac? With file sharing enabled, I still cannot get to my Windows 7 shares, although the files on my Mac do become available to Windows. Thanks again.
-
I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same?
Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
business edition to avoid such limitations of RAM?
Waiting for your favorable and quick response.Hi again,
th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
with your downgrade you can still using the 2008 CALs.
thanks
diramoh -
Itunes issues with Windows having to do with Apple's patent
I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.
I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped! -
Itunes issues with windows 8... laggy?
anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped! -
Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above
I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.
I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver... -
Is there a known issue with windows 8 supporting itunes?
each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?
Yes. Some are complaining.
Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
See if this helps -
Where is the forum for Windows Update issues with Windows 10 TP 9926
Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
Hi, Is anyone having any luck running Premiere Pro CS4 with a graphics card (Intel Express 965M) that supports OpenGL 1.5? I'm getting no video in the source or program windows and after a lot of messing around and upgrading think it's probably the g
-
How can i change the input language from English to Spanish in Numbers?
-
Hello, when I turn on sql_trace: SQL>alter system set sql_trace=true; and I don't connect to it. But in udump folder've many trace log file. I don't understand! Help!
-
There I go first mistake straight off. I was wondering how to fit my big long problem in. My fault I am sure but if anyone can help please. Early 2008 Mac Pro Desk Top, 2 hard drives 1)snow leopard, 2)lion. I have downloaded Mountain Lion usuing disk
-
JSP on JDeveloper9i emedded OC4J
Hello- When trying to run the JSP samples on OC4J, I get the following errors: 500 Internal Server Error OracleJSP: oracle.jsp.provider.JspCompileException: Errors compiling:C:\JDeveloper9i\j2ee\home\application- deployments\default\defaultWebApp\tem