Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
Nick

Yes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Windows 8 & Server 2012 not reflecting in updates category in SCCM 2012 SP1 console

Hi,
We are using SCCM SP1 with CU4 on server 2012. I am not able to see the windows 8 and server 2012 in the updates category for patch management.
Any Idea?

They should appear after the first successful sync.
Torsten Meringer | http://www.mssccmfaq.de

Migration of SCCM 2012 SP1 to SCCM 2012 R2 in a new domain.

I am wondering if it is possible to migrate objects from a SCCM 2012 SP1 server in one domain to a new SCCM 2012 R2 server in another domain ?
I read this article, but it does not state this particular combination.
http://technet.microsoft.com/en-us/library/gg682006.aspx
Thx
Thomas

For Migrate from SCCM 2012 SP1 to SCCM 2012 R2 in same environment/Domain, it's support and applicable.
But migrate to new domain, it's not support. Also you can't migrate database for new domain or object. you will need to rebuild it.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Adding New SCCM 2012 SP1 Distribution Point To Replace Existing Distribution Point

We currently in the process of the doing a site server refresh at all our remote sites. Each remote site currently has a physical 2012 SP1 DP, and will be replaced with a new DP at each location, and will eventually decommission the current one.
What's the best way to introduce a new DP and remove the old one?
Thanks
Bern

You can use this method if distributing through the WAN is not an option.
http://blogs.technet.com/b/kensmith/archive/2013/08/01/migrating-the-content-library-between-distribution-points-in-sccm-2012-sp1.aspx
If you don't care, just add it to SCCM and replicate your content. Modify your boundary once done.
I hope you have a DP Group, if so, just make it member of the group and all your content will be copied. If not, you'll have to go through all your content and add it manually or script the process using PowerShell.
To remove your existing it's simply a matter of removing the "Distribution Point" role on your Server using the SCCM Console. (Administration / Site Configuration /Site Server, select your distribution point, right click Remove)
Benoit Lecours | Blog: System Center Dudes

SCCM 2012 SP1 - R2 Upgrade Incl Windows ADK for Windows 8.1 Update

Hi All
I Need some advice
We are preparing for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
Quick steps:
1 Uninstall ADK 8.0
2 Install ADK 8.1
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
But today I read the following article
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
How does this update fit in the upgrade process (add step 7 and install this update on the SCCM Server) , or is it better to leave this update because windows PE5.1 is not supported yet.
I hope someone can give me some good advice
regards and thx in advance
Johan

Hi All
So I can also use the ADK 8.1 Update with the installation , so my quick steps will be than for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
1 Uninstall ADK 8.0
2 Install the ADK 8.1 UPDATE
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
Regards
Johan

Migration of old system with new version and 64bit hardware

HI Sapguru's,
Our req: Build New CRM system with all latest version of software & 64 bit hardware. Details mentioned below.
Old System:
CRM 4.0 ABAP System
win 2003
Oracle 9i
non-unicode
32 bit hardware
New System( which i want to build):
CRM 5.2 (rampup version) ABAP+JAVA
win 2003
Oracle 10g
Unicode
64 bit hardware
Above mentioned is an new requirement for us.
Our Plan:
1. Old system -Conversion from non-unicode to Unicode system
2. Old system - System copy export method for create exports
3. Build New system with new unicode version(5.2) with Old system exports
Questions to Sapguru's:
1. Our plan will work or not?
a. If Yes - give me the guidelines ,Notes ,documentation paths
b. If No - Please provide your opinions/advices
2. 32 bit exports will work on 64 bit hardware SAP system?
Thanks Advance.
Regards,
Ramu,

Hello Markus,
Thanks for your quick response!!!!
I understood - what you have mentioned for my question but i have one clarification on your answer and one new questions to you.
Clarification:
My oldsystem is non-unicode system. As you said i will do system copy export method on old system(non-unicode) then i will use that exports(non-unicode) to build new system.
Here my clarification is:
Will that exports(non-unicode) work while installing new system with unicode? or Will it give any problem?
Question:
1. will old system with oracle 9i exports work on new system with oracle 10g?
Thanks Advance,
Bhaskar Rapelli

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Deploying Office 2013 through SCCM 2012 SP1 leaves Office 2010 Tools and Sharepoint behind

I apologize in advance, but I have searched similar topics to this, but I haven't seen an answer yet that describes where and how to accomplish this. I'm also a bit new to SCCM and I'm still finding the nuances.
Scenario: Running SCCM 2012 SP1. Office 2013 32bit is added as an application and deployed properly with an accompanied .msp file stored in the source folder. The configuration is to have Office
2010 uninstalled silently. The deployment runs flawless and the user doesn't know otherwise. Success in anyone's book, right?
Except... Office 2010 Tools and SharePoint Workspace 2010 are left over. Manual uninstallation is not an option. This is for hundreds of PC's in several global locations.
I've seen it hinted to write a script. That's fine I suppose, but what do I write, where do I store the script, and can I have SCCM2012 automatically run it before the installation of 2013?
Our favorite IT tool Google hasn't quite returned what I'm looking for. Does anyone here have ideas or perhaps have experienced a similar issue?
Thanks,

1st, save the following content as a XML file on a server share, named as "config.xml".
<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Run the following script during or before the installation of Office 2013:
"C:\Program Files\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config \\servershare\Config.xml
For more SCCM specific topics, we'd recommend you to visit the SCCM forums at:
http://technet.microsoft.com/en-us/systemcenter/gg191847
Max Meng
TechNet Community Support

I am trying to sync a new ipad with a mac but do not want to sync the 15000 photos from my mac to the ipad - how do I prevent this?

I am trying to sync a new ipad with a mac but do not want to sync the 15000 photos from my mac to the ipad - how do I prevent this?

See Here,
Syncing photos via iTunes
From here...
http://www.apple.com/support/ipad/syncing/
And Here...
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

Do you have alot of apps running in background? Tap home key 2 times and there's a list across screen with icons you can deselect them by hold on one and they wiggle touch the minus button and it will deactivate them untill you use them again. Do you have the phone dim after so many seconds or minutes? Is the screen bright all time? Do you go on the Internet or watch video on phone?
These things can affect the hrs of use.

System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

hi All,
I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
system task 'policyevaluator_unlock ' returned error code 0x8000fff
Kirpal Singh

Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
schedule”.
BC

Deploy Windows 8 To Go through SCCM 2012 SP1

First a little backgroud:
I have SCCM 2012 SP1 with MDT 2012 Update 1 integrated. I am using an MDT UDI task sequence to deploy windows 8 and it works perfectly. My Windows 8 image is fairly thin (only containing OS updates and C++ runtimes), and I am using the MDT database
and an MDT task sequence in SCCM 2012 to dynamically set a list of SCCM Applications to install as well as settings based on location.
Now I want to get Windows To Go provisioning working in SCCM 2012 SP1. I had a powershell script that preparied the drive and applied a thick image (including office and other apps) to it then updated unattend.xml with a computer name and the domain join
info. That worked for me however I'd like to levarage the dynamic task sequence that I described above to build these To Go sticks the same as my other Windows 8 machines without having to keep updating the thick image evertime something changes.
There isn't much info out there that Iv'e found on setting up SCCM 2012 SP1 to provision windows to go here are the two that I have found
http://ixrv.blogspot.com/2012/10/provisioning-windows-8-to-go-with.html
http://technet.microsoft.com/en-us/library/jj651035.aspx
I followed the instructions in the first link and was able to run the Windows to Go Creator program and apply the prestaged wim to the USB stick. I rebooted from the USB stick Windows PE started and started to run my task sequence then it errored out on
the apply image step. At this point it occured to me that the MDT SCCM task sequence was probably not setup for prestaged media and or Windows To Go.
So my question is am I on the right track? Do I just need to examine each step in my task sequence and make sure that it will work properly with my Prestaged/Windows To Go stick? If so has anyone actually gotten this to work that could give me some advice?
Or is it asking too much to have a dynamic Windows To Go task sequence and I should just be building a thick image and using a second task sequence specifically for Windows to go?
are there any other resources for Windows To Go with SCCM that I'm missing?
Thanks,
Tony

First of all sorry I missed your last three posts I have to check my email notifications. I'll try to answer all of them even though I think the last part is the only one where you are still stuck.
When I created my prestaged media I didn't put anything into it except for the the OS image and my PE image. On the Select Application and Select Package screen in the prestaged media wizard remove any application or packages that are added automatically.
The task sequence is supposed to be smart enough to know if the version of the package that is on the prestaged media is out of date and go to a DP to get it but that didnt work for me. The only way I was able to get it to work was to remove all the packages
from the prestaged media even the Customsettings package, the MDT toolkit package, USMT, etc..
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/d729d0ff-829f-4af8-91af-2131b3355fd0/
This thread which is about prestaged media in SCCM 2007 helped me to understand how prestaged media is supposed to work. Basically what I learned is that once the computer is rebooted from the ToGo stick into PE the task sequence will run the same as any
other task sequence installing any applications and setting up your ToGo stick just like any other computer that runs the task sequence they dont need to be in your prestaged media for this to happen.
You shouldn't need to worry about partitioning WTGCreator.exe will partition the ToGo stick for you I'm just using the standard MDT Integrated partitioning in my task sequence. The one thing that I did was set the Windows To Go Creator package to "run from
distribution point" which speed things up because then it didnt download the prestaged wim then apply it to the USB drive.
Is it booting into PE then rebooting? Did you check the "Allow unattend operating system deployment" check box when you made your prestaged media? If so it wants you to have set the task sequence to run in a task sequence variable SMSTSPreferredAdvertID
to the task sequence ID you want to run. I'd just remake the media and leave that box unchecked.
Good luck and let me know how it works for you. I'll check back sooner this time I promise.

My new MacBook Pro does not shut down

Hello,
please help. I have a brand new computer - MacBook pro - 2.2 GHz, Intel Core i7, Mac OS X 10.6.7. When I bought it, I followed the onscreen instructions and "transferred" my old computer, 4 year old MacBook, onto the new one (my accounts, with all the documents, preferences, etc). Now, for some time, before getting my new computer, I had been experiencing problems on my old one: namely, it was not shutting down and I had to "force" it by pressing the switch. I should have known better than transferring the old comp's settings and accounts onto the new one. I didn't and now my new computer is also not shutting down. Does anyone know how to find where the problem is and how to eliminate it? Do I have to backup all, erase, and reinstall everything or is there a less drastic way to cure my afflicted computer?
Thank you!
P.

Hi,
running the activity monitor and select System Processes, set the window to see allrunning processes and sort by CPU usage, close all applications that are using and try to shut down your Mac, then identifies what the process that consumes more CPU percentage.
Regards

SCCM 2012 SP1 SUP on Windows Server 2012

Hi sccm guys,
I'm having Troubles to get the SUP role working on my Windows Server 2012. I'm using SCCM 2012 SP1. I installed (and did not configure) the WSUS role from the Server Manager. I Chose to install the DB on the local SQL instance (no WID instance).
Then I added the SUP role to the Server and configured it with the seperate wsus Administration site (Ports 8530 and 8531).
WSUS gets configured partially (Proxy Settings and "Products and Classification" Options only for Office and Windows)
The folowing error pops up in the wcm.log
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
Any clues?
Cheers
Sebastian Bammer

Also did not fix my issue. A round of my logs:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.2.9200.16384
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.2.9200.16384
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Verify Upstream Server settings on the Active WSUS Server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:14 a.m.
3556 (0x0DE4)
Successfully refreshed categories from WSUS server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:16 a.m.
3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Starting WSUS category sync from upstream...
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:26 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:41 a.m.
3556 (0x0DE4)
Successfully refreshed categories from WSUS server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Subscription contains categories unknown to WSUS.
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=SCCM01.domain SITE=AKL PID=1544 TID=3556 GMTDATE=Mon Jan 14 19:29:42.723 2013 ISTR0="SCCM01.domain" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
Thanks Christoph

Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Similar Messages

Maybe you are looking for