Windows 8.1 with IE 11.0.2 - WPAD issue

Hi there,
I am working on an 8.1 SOE and have an issue whereby the wpad.dat file does not seem to apply and there is a 10 second delay every time IE 11 loads, before our intranet page is displayed (seems almost identical to the 10 second delay described here -
http://technet.microsoft.com/en-us/library/cc302643.aspx). Once loaded all sites work so it's just the startup delay I need to sort out. Chrome loads instantly but we have
apps that rely on IE. Here are some things I've checked so far:
- Our current Windows 7 SOE with IE8 loads the wpad.dat and there is no delay, I can see this with wireshark and the WPAD registry entries exist under HKCU, wpad.dat exists in temporary files folder
- I cannot see any reference to dns query for wpad or http get for wpad.dat on Windows 8.1 with IE 11 in wireshark, the wpad registry key exists but no data appears under it once IE has loaded, cannot see any wpad.dat in the cache
- when I load chrome I can see the dns query and http get for wpad.dat which all happens within one second (hence at this stage I'm assuming this is a bug in IE11)
- there are entries loaded into DefaultConnectionSettings and SavedLegacySettings, but they dont seem to reference any host (on my win7 machine I can see the correct path to the wpad):
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections]
"SavedLegacySettings"=hex:46,00,00,00,09,00,00,00,09,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00
"DefaultConnectionSettings"=hex:46,00,00,00,03,00,00,00,09,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
- I've tried removing the patch to 11.0.1 and 11 with same results
- disabled AV, IPv6, all sorts of other stuff without any success
Appreciate any ideas :)
Thanks,
Simon

Hi, I have gone back to a very simple wpad.dat as below:
BackupRoute="DIRECT";
UseDirectForLocal=true;
ConvertUrlToLowerCase=false;
function FindProxyForURL(url,host)
return "PROXY ipaddress:port";
With this file the issue is resolved, so it is definitely something to do with the wpad content. Are you able to confirm in your environment?
Cheers, Simon

Similar Messages

How do I install Elements for Windows 7 PC with 64 bit? Get error message - file archive part missing

We purchased Elements 12 and Premiere Elements 12 on September 7, 2014 and have tried a variety of things including searching through FAQs on the Adobe site, etc. etc. and cannot get our downloads to work. We are avid computer users and have never had problems downloading software before.
From our account under "orders" - I have tried clicking on the Akamai download manager and the Alternate Download Method on for each application with the same results.
We have a Windows 7 PC with a 64 bit operating system and Internet Explorer 11.
On all attempts we get an Adobe screen with 2 links – 1 for a file ending in .7z and a 2nd file ending in .exe.
I click on the first file and confirm the download completes at 100% (not paused, etc.) and is in the downloads folder for my user name on the PC.
I click on the 2nd link for .exe and I receive the error message below – 2nd screen shot – “file archive is missing” all folders/files must be in same folder.
So I see it’s a winzip file (as a winzip pop up folder had come up also) so I download the free version and unzip the files in the same downloads folder under my user name to try that.
I click on .exe file link again and same message. I tried copying the files directly to the downloads folder (as they all unzipped into a subfolder called PSE 12 and tried clicking on .exe again but get the same message.
For Premiere I tried the same and got same results on the 64 bit version download.
I do not know how to access the software we purchased.
Any help or advice is appreciated.
Also - if anyone knows how I can contact Adobe for a full refund so I can just buy the boxed software instead - that would be helpful as well as that is not easy to find online either.
Thanks!
Ariel

I get an error message saying that the quicktime installer will only work on 32 bit
The QuickTime player works on 64-bit systems. (It's a 32-bit application, but it should run fine using the standard 32-bit-on-64-bit Windows-on-Windows emulation.)
What's the precise text of your installation error message, dc? (There one or two different ones I can think of that might mention 32-bit)

I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

iTunes will run fine with the media on an external drive.
However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
http://support.apple.com/kb/HT1364

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed.

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed

right click the executable > click 'run as administrator'.

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

IE8 in Windows 7 crashing with flash frequently

Hello,
I'm running a brand new install of Windows 7 (formatted with Windows 7 on a brand new drive, not upgraded from a previoius OS). I'm running the 32 bit Internet Explorer 8.0.7600.16385 on a Windows 7 Ultimate x64 with all the latest MS patches. I have flash 10,0,32,18 installed. I can browse many flash pages but about 1 in 12 will eventually crash IE8. I can go back into IE8 and open the same page that crashed flash/ie8 but it is very frustrating to browse the web and have it crash so often.

Some troubleshooting for flash player:
http://kb2.adobe.com/cps/191/tn_19166.html
If you follow all the steps, this will usually lead to http://kb2.adobe.com/cps/408/kb408620.html
The second link includes steps for developers and then steps for users (not sure why they didn't list the users section first). Skip to the users section and follow those steps.
This will fix many flash errors, however there are still some flash videos that are just broken. You should record the URL of the sites that cause your flash player to crash IE.

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with. with a

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.

I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.

Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaq

Hi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

You can home-share multiple libraries but only use one account at a time.

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

View change in the middle of sessions to Windows 7 clients with OneDrive

Some Windows 7 clients habe reported that the view changes in the middle of sessions to Windows 7 clients with OneDrive.
For example they have been able to see image pictures as normal in the beginning of sessions and then suddenly only image names !

Hi yourDragonXi,
Is it a desktop One drive or a web browser Onedrive content? According to your description, the should be a Sync process when you open the images, besides a screenshot will be helpful to find the explanation.
Thanks and Regards
Wade Liu
TechNet Community Support

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

Windows 8.1 with IE 11.0.2 - WPAD issue

Similar Messages

Maybe you are looking for