Windows 8.1 x64 Smart Search Outlook and OneNote 2013(x32) not returning results

Is the 8.1 Smart Search([windows-key]-type) supposed to return results from Outlook and/or OneNote?
I am using Exchange Cached mode for Outlook if that matters.
I have done the following to try and get results to show up:
control panel...Indexing Options...Advanced...File Types...Index Properties and File Contents
used indexing troubleshooter which found no problems
control panel...Indexing Options...Advanced...Rebuild...
used scanpst to scan my ost and make repairs.
checked and unchecked Outlook and OneNote within index properties
tried to go to C:\Users\[username]\AppData\Local\Microsoft\Outlook\username.ost properties...advanced...checked allow this file to have contents indexed. Except the next time i start outlook the check mark goes away.
verified .pst , .ost and .pst files are all in the index service...file types... list
Search within Outlook itself works just fine and quickly, but i would like to be able to search from the "Smart Search". File name search is flawless.
If it isn't supported, why is it in the indexing options that clearly work for smart search settings because I also added a location for searching where file names search works just fine(although it does seem the contents of excel/word files are
not being indexed, but the index might still be rebuilding)
Any help would keep some hair on my head.
Thanks

Hi,
It seems that the smart search can't search the content in outlook and OneNote.
blogs.technet.com/b/daanish/archive/2014/03/19/windows-8-101-smart-search.aspx
The reason why Outlook and OneNote appears in the Index option tab is that Outlook and OneNote need the Windows search to help index the content in Outlook and OneNote, if we remote the outlook and onenote from Index Option tab, the search function in the
Outlook and OneNote may not works.
Also, smart search main focus on Settings , files, web Images, web Videos which we can select above the search box. Another reason we suspect the design for this is the consideration for security, if we can search the emails in the smart search, that
maybe some programs can access the content in Outlook and OneNote without authentication .
Hope the information above help.
Best Regards,
Jason Zeng

Similar Messages

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
#Run Firefox in safe mode does that prevent crashes ? [[Troubleshoot Firefox issues using Safe Mode]]
#Disable all plugins
#Repeat and this time try in Windows safe mode. use the F8 key http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Outlook and Word 2013 freezing up

I used to have Office 2010 installed on my Win 7 Ultimate 64-bit PC. It never gave me any problems. I upgraded to Office 2013 (32-bit - 15.0.4535.1006) awhile back and Word and Outlook started continuously freezing whenever I was editing a document or email.
If I am just reading email, it is fine. When I click on Forward or Reply, or compose a new email, it freezes for at least 15 seconds, and often much longer. I may get a few words typed before it freezes the 1st time, but it always does. If I keep typing,
or try to click somewhere else in the app, it will eventually tell me the program is not responding. After it comes back, I may get a couple of sentences out, but it will eventually freeze again. A simple 10 second email often takes several minutes to complete.
It doesn't matter if the email is in the preview pane, or if I click the Pop Out button to have it in its own window. It also doesn't matter if I open Outlook in Safe Mode or not.
I found kb article 921541. After using the Fixit tool from there and changing the default printer to the MS XPS printer, Word seems to be working. So it would seem, even though it is the same problem in both Office apps, and they started
locking up at the same time, the problems are unrelated.

Hi to everyone,
I too have the same problem with both Outlook and Word 2013 which are both freezing up for some seconds every 2 or 3 minutes when writing email or document.
It happens when I have an Internet connection. If not connected to Internet, everything works fine, Outlook and Work don't freeze at all.
So, I guess it is related to Internet connection, which is filtered with a firewall. Maybe that filtering could lead to these issues, however, on another workstation set up with Outlook 2010 on the same network, there is no problem.
I tried the classic solutions, like disabling video card acceleration and so on, but it doesn't change anything. Also, there is no error or warning in Event Viewer. Finally, it had already happened 3 months ago, and using a network sniffer to watch for network
flows, I had allowed some IP addresses on the firewall. But problem came back...
Thank you for your help.
Fred

I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air because there is no more storage space available. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

Connect your devices to the computer with the USB cable (one device at a time) and import the photos via iPhoto or Image Capture.
If you have not changed any default settings on your computer, iPhoto will automatically launch when you plug in the device. Then follow the import prompts.

Success so far it's been days and the shortcuts have not returned steps to remove

Success so far it's been days and the shortcuts have not returned
did the changes on both devices as step by step
on both devices I went to settings / / general / keyboard / Shortcuts, tapped edit, then clicked the red circles, leaving just one shortcut
then on both Apple devices I went to settings / general / keyboard/ and turned off dictatation / clicked the pop up "turn off dictation" then turned Dictatation back on
Turned off both the iPad and iPhone then back on
on both went to settings / / general / keyboard / Shortcuts, then clicked edit and removed the last remaining shortcut
warning the spell checker and seri took a while to learn my texting style and acted like is was vary messed up at first
i just wrote note in notes 100 or so words and it seems fine now it still relearning learning my commen writing style
good luck

disregard last post shortcuts have returned after a week

Windows 8.1 x64, HP 4050 printer and Parallel Printer Adapter to USB

The laptop is windows 8.1 x64 Toshiba brand laptop. The printer is an older, excellent condition HP 4050 printer.The connector is a Parallel Printer to USB Adapter. The problem: Drivers install fine, however when I connect the printer to the laptop via usb port, the laptop cant find the printer. I have down loaded the drivers several times, and deinstalled/rebooted/reinstalled many times.I have changed the USB port to the known working mouse port and get the same result.I have bought new parallel printer wireI have verified all connections (should have put that first)I have read through many forums looking for any help. What its not doing is finding the printer. Anyone?

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Outlook 2013 (included with Home and Business 2013) does not archive everything

We are running on Exchange 2010 SP3. We have about 5 PCs with Office Home and Business 2013 (click-to-run version). We set up auto-archiving on all machines and set the options to apply on all folders. It's supposed to back up everything 24 months prior.
It does not back up everything. For example, on my machine which is Windows 8.1 (the others are windows 7 pro), it only backed up emails from March of 2013. We have already applied the registry fix where we do the following:
registry key (dword) ArchiveIgnoreLastModifiedTime = 1
Outlook 2013 in HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences
That didn't help at all. The machines with Office Home and Business 2010 work fine.
Anyone else having this issue?
Thanks in advance,
Alex

Seems this is a single problem and we may focus on the problemic machine setting or data file itself.
http://www.howto-outlook.com/faq/archivenotworking.htm
Run SCANPST tool to repair Outlook Data Files
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA010075831.aspx
Thanks.
Tony Chen
TechNet Community Support

'People Search Core Result' web part with 'office' filter in Keyword Query is not returning results

I have created a page with "People search core result" web part on SharePoint 2010.
When I try to use the setting (A) or (C) as shown below, there is no results been returned but when set to setting (B), there are results been returned.
In the returned results I can see the OfficeNumber field is been populated with values and some of them is "UK Finance".
Setting (A)
Result Query Options
-- Fixed Keyword Query = contentclass:spspeople -- Append Text To Query = Department:"Finance" AND OfficeNumber:"UK Finance"
Setting (B)
Result Query Options
--- Fixed Keyword Query = contentclass:spspeople --- Append Text To Query = Department:"Finance"
Setting (C)
Result Query Options
--- Fixed Keyword Query = contentclass:spspeople --- Append Text To Query = OfficeNumber:"UK Finance"
What am I doing wrong here? Am I missing something? Do I need any additional configuration in order to get this to work?
I hope someone could help me or point me to the right direction.
Thank you
muges

You might want to check the Manage User Properties area of the User Profile Service in Central Admin.
Any properties you query on should be marked "Indexed" or "Use in Scopes". You can also check that you are using the correct internal name for these properties.

Fuzzy search not returning results?

I'm executing a phonetic search on the nm_resource column. my application allows a call center employee to search on the resource name (nm_resource), if the resource is not found then they will enter a new one. The problem is someone may have already entered the resource name but spelled it incorrectly resulting in duplicate records for the same resource name. To enable the call center to retrieve records that may have the same sound but are spelled differently we have implemented the fuzzy search capability of Oracle text. Things have been going very nicely for the most part with the exception of this one issue we're trying to understand.
Using the query below we're searching for the resource name "rosies" the actual record in the database was entered as "rosy's". the search returns (rosies,rosie's,rosys) and does not return ---> rosy's <--- the record i'm interested in
it is reasonable to expect rosy's to be returned in the result set? my query should retunn the max fuzzy expansions and all fuzzy scores.
select score(1), nm_resource, ADDR_RSRC_ST_LN_1, id_resource, ADDR_RSRC_CITY FROM caps_resource where
CONTAINS (nm_resource,'fuzzy(rosies, 0, 5000, weight)',1)>0
union
select /*+index(caps_resource ind_caps_resource_8)*/ 10, nm_resource, ADDR_RSRC_ST_LN_1, id_resource, ADDR_RSRC_CITY from caps_resource
where NM_RESOURCE_UPPER like upper(replace(replace('%' || 'rosies' || '%',' '), '-'))
and rownum<500 order by 1 DESC;
any help explaining this is much appriciated.
Regards,

When you index "Rosy's", by default it sees the apostropohe as a delimiter and tokenizes and indexes "Rosy" and "s" separately. So, you could only find it by searching the singular form or the singular form obtained by using stemming. However, if you set the apostrophoe as a skipjoin, then it tokenizes and indexes "Rosys" as one token that you can then search for that using "rosies":. Please see the demonstration below. You might also be interested in soundex, which can be used with Oracle Text, or the functions in the utl_match package or metaphone.
SCOTT@orcl_11g> CREATE TABLE caps_resource
2 (nm_resource VARCHAR2 (30))
3 /
Table created.
SCOTT@orcl_11g> INSERT ALL
2 INTO caps_resource VALUES ('Rosy''s')
3 SELECT * FROM DUAL
4 /
1 row created.
SCOTT@orcl_11g> SELECT * FROM caps_resource
2 /
NM_RESOURCE
Rosy's
SCOTT@orcl_11g> CREATE INDEX your_text_idx ON caps_resource (nm_resource)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4 ('STOPLIST CTXSYS.EMPTY_STOPLIST')
5 /
Index created.
SCOTT@orcl_11g> SELECT token_text FROM dr$your_text_idx$i
2 /
TOKEN_TEXT
ROSY
S
SCOTT@orcl_11g> SELECT * FROM caps_resource
2 WHERE CONTAINS (nm_resource, 'FUZZY (rosies, 0, 5000, weight)') > 0
3 /
no rows selected
SCOTT@orcl_11g> DROP INDEX your_text_idx
2 /
Index dropped.
SCOTT@orcl_11g> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('your_lexer', 'BASIC_LEXER');
3 CTX_DDL.SET_ATTRIBUTE ('your_lexer', 'SKIPJOINS', '''');
4 END;
5 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> CREATE INDEX your_text_idx ON caps_resource (nm_resource)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4 ('STOPLIST CTXSYS.EMPTY_STOPLIST
5 LEXER your_lexer')
6 /
Index created.
SCOTT@orcl_11g> SELECT token_text FROM dr$your_text_idx$i
2 /
TOKEN_TEXT
ROSYS
SCOTT@orcl_11g> SELECT * FROM caps_resource
2 WHERE CONTAINS (nm_resource, 'FUZZY (rosies, 0, 5000, weight)') > 0
3 /
NM_RESOURCE
Rosy's
SCOTT@orcl_11g>

How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test? I can do this individually but not for the composite CCR.
Thanks.

Hi,
I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
the laboratory, you should be able to open it as a document and print it.
I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
Thanks,
Kathy

Visio and Project 2013 silent install returns immediately (before install is finished)

Hi,
I am building a task sequence that will include Office 2010 ProPlus (volume license), a bunch of other products (like SQL Server and Visual Studio) and also Visio 2013 and Project 2013.
For Visio 2013 and Project 2013, I have to use the retail media (this is for use in academic computer labs and we have a single retail key through DreamSpark Premium that allows unlimited activations - I don't know why DreamSpark doesn't just give a volume
license key).
I managed to get Visio 2013 and Project 2013 to install silently by modifying the config.xml file and using the /config parameter. However, when running my install script (the usual VBScript wrapper) or just from the command line, the command returns before
setup finishes (literally within less than a second). Setup continues to run and finishes successfully, but as you can imagine, MDT considers that application install finished and tries to move on to the next application which fails because another installation
is still in progress.
I've included below the relevant portion of the VBScript wrapper. Any help in figuring out how to get the wrapper to wait for the installer to finish is appreciated.
sSetupFile = oUtility.ScriptDir & "\Source\setup.exe"
sArguments = "/config vispror.ww\config.xml"
oLogging.CreateEntry oUtility.ScriptName & ": Starting installation", LogTypeInfo
// Check for existence of setup file omitted
iRetVal = oUtility.RunWithHeartbeat("""" & sSetupFile & """ " & sArguments)
Coincidentally, iRetVal = 0 indicating success.
Thanks,
SA

Hi SA,
Obviously you use the VBS wrapper for some reason. To my understanding this behaviour needs to be captured and translated to "script is till busy, when installation completes script is finished, proceed to next step".
I can only advise you to either try the command line directly in MDT, instead of using the VBS wrapper, and/or try to create an MSP and try this in your VBS wrapper, command line directly in MDT.
MSP files are easily created by going into command prompt to the sources folder of Visio / Project and execute the following command: setup.exe /admin this will start the Office Customization Tool which enables you to create an MSP file.
When you are ready, execute the following command to install the application with the settings in the MSP: setup.exe /adminfile custom.msp
Again I can imagine the purpose of the VBS just as I can imagine the purpose of using the config.xml above a custom.msp. But for starters this should get you going to try to find an resolve where the issue lies. In the VBS or somewhere else.
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards

CHKDSK v6.2.9200.16384 dichotomy between Windows 12 Server x64 Standard Build 9200 and Windows 8.1 Enterprise x64

I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
the same application between these two systems.
Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
So, what is the difference between these two systems? Why should the same version of
any application yield different results between these systems?
The only result on Windows 2012 Server was:
C:\Windows\system32>chkdsk /x /f M:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
The result on Windows 8.1 Enterprise was:
Log Name: Application
Source: Chkdsk
Date: 11/26/2014 8:10:05 AM
Event ID: 26214
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: James-HP
Description:
Chkdsk was executed in read/write mode.
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
 234756 KB in 42 files.
 176 KB in 26 indexes.
 153755 KB in use by the system.
 65536 KB occupied by the log file.
976371120 KB available on disk.
 4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Chkdsk" />
 <EventID Qualifiers="0">26214</EventID>
 <Level>4</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
 <EventRecordID>11361</EventRecordID>
 <Channel>Application</Channel>
 <Computer>James-HP</Computer>
 <Security />
</System>
<EventData>
 <Data>
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
 234756 KB in 42 files.
 176 KB in 26 indexes.
 153755 KB in use by the system.
 65536 KB occupied by the log file.
976371120 KB available on disk.
 4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
</Data>
 <Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
</EventData>
</Event>

Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

App-V 5.0 SP1 and Outlook and Lync 2013

I am trying to sequence Outlook 2013 with App-V 5.0 SP1 but have run into an issue with using the virtualized package of Outlook 2013. When I try and open the application I get the following error:
Error: Cannot start Microsoft Outlook. Cannot initialize Microsoft shared utilities. Restart or reinstall Microsoft Outlook.
I am running the package locally and it has been published globally.
It seems as if the package is missing something. Any help would be appreciated.

I wasn't at first and that is possibly why I was getting that error. I have been trying to unsuccessfully today to use the Office 365 click to run.
I downloaded the click to run setup files. and now I'm trying to create the package.
Command Line to create the package: c:\setup.exe /packager C:\configuration.xml c:\package
I think the problem is with my config file:
<Configuration>





</Configuration>
when ever i try and run the Packager I get this error:
Windows cannot find 'C:\users....\Clientx86\integratedoffice.exe'. Make sure you typed the name correctly, and then try again.
I am pretty certain that my SourcePath is wrong. but what do i point it at?

When I enter a subject in the help "search box" and enter, it does not go to the subject but goes back to the screen before I clicked on the help option at the top of the screen

I cannot get thehelp option to work. When I click on the help option at the top of the screen, I get the page with the Search option, but when I enter a subject to search, tescreen returns me to the point where I started before clicking on "help". Is the help file corrupted? How can I fix?

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Windows 8.1 x64 Smart Search Outlook and OneNote 2013(x32) not returning results

Similar Messages

Maybe you are looking for