Windows 8 how to bring up copy/paste option from touch screen

How do you bring up Copy/Paste option from touch screen?

Adobe Reader Touch supports copying text only (not images).
Tap on text and move "grabbers" to adjust text selection (Touch) or select text with a mouse.
Press and hold (Touch) or right-click with a mouse to bring up the context menu.
Select Copy from the context menu.
You can paste the copied text to an existing sticky note or text field in Adobe Reader Touch or to other application such as Microsoft Word or Notepad.

Similar Messages

  • How do i remove the airplay option from the screen saver on my apple tv.  Its blocking all my pictures

    The Airplay Screen saver option telling me to choose a wi fi and choose this apple tv keeps poping up on my apple tv when it goes on screen saver mode.  It blocks all of my photos showing on my screen saver.  Can anyone help me to remove this

    Welcome to the Apple community.
    Assuming that both devices are connected to the same network and that airplay is not turned off in your Apple TV settings, then you should be able to see the airplay icon when playing content on your iPad, by tapping the screen to reveal the playback control bar.
    If you do not see the airplay icon when you do this, you might try restarting the iPad, the Apple TV and your router.

  • X11 Edit/COPY/Paste Option

    Using X11 window the Edit copy option apparently functions however the paste option appears to be permanently greyed out-so that it is impossible to paste any lines that have been copied.
    This does not appear to be case with Terminal which allows the user to copy and paste.
    Are there any suggestions as to how to active the edit/paste option in X11

    Copy and Paste in X11 works very differently than in Mac OS. To run X11 on a Mac, Apple had to integrate the two different paradigms.
    In X11 there is no copy -- any text selection is immediately on the clipboard (but you can only have one selection at a time, across all X11 windows). Paste is done using the middle mouse button. In Apple's X11, a preference setting allows a keyboard shortcut to emulate the middle button. Thus, to copy and paste, make a selection, then paste with the middle button. There is no copy step. This works within X11, but not between X11 and non-X11 apps.
    Outside of X11, copy using the usual Mac procedure. If there is no selection in X11, the Mac clipboard will be available as the X11 clipboard, but you paste into X11 using the X11 method. As soon as you make a selection in X11, it overrides the Mac clipboard (but only within X11). To copy from X11 to non-X11, use Edit>Copy to copy the current X11-selection into the Mac clipboard, then Mac Paste is available outside of X11.
    I am sure you are thoroughly confused now. I don't know how it could be integrated any better without breaking either the Mac interface or the X11 interface or both. You'll have to play with it until you get the hang of it.

  • 0 down vote favorite share [fb] share [tw]        How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard.  Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

    How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
    Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
    I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
    Any clues will help a lot.

    You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

  • Copy paste option

    I have C2-03. No copy paste option on create massage and text writing in this handset.

    Hi Satyam384,
    If you wish to make a feature request, please do so by clicking the Contact Us link at the bottom of this page and following the appropriate instructions. As this is a user-to-user forum only, this would be a way to contact Nokia directly.

  • Copy paste option update

    I have c2-03 handset. This handset not support copy paste option in creat massage option. I request to nokia please attach this option when next time software update.

    This has been already sent for suggestion LAST YEAR.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to do a copy/paste of a question (and the possible answers) in a form ?

    Comment peut-on réaliser un copier coller d'une question (et des possibles réponses) dans un formulaire ?
    Merci de vos réponses.
    How to do a copy/paste of a question (and the possible answers) in a form ?

    Hi chrisweb86,
    Can you please elaborate the complete workflow you are trying to perform?

  • NOKIA X3-02: Phone Restart & Mak/Copy/Paste Option...

    Three Options To Make This Cell Brilliant
    Restarting- My Cell Automatically Restarts When I Am Messaging Or When I Am On A Call Its Really Irritative At Times - I Have Installed Phone Software To Latest Of Latest Version(V6.00)
    Mark/Copy/Paste- Mark Copy Paste Option This Is A Must
    Multiple SMS Deletion, Ya Going In Conversation Can Delete Multiple SMS Of Single Contact But For Different Contacts This Is MUST....!!!!

    That is right.
    Hey Nokia, What is the advantage of removing mark option in messaging inbox for S40V6 phones?
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • Add maze lock and copy paste option into asha 305

    I want to suggest to add maze lock and copy paste option into new software update of asha 305..

    i have nokia asha 305 the best phone but it the version 07.42 dosent support sum whatsapp features like copy paste and sum other features like maze lock nokia company updater plz have an upadte of noka asha 305 nd install everything tht is requierd by the phoneeeee plzzzzzzzzzzzz..........................

  • How to copy-paste frames from one document to other with there respective layers intact?

    Hi All,
         I am facing an issue while copy paste frames from one document to other. I have a 3 frames in first documents each one on different layer. First document has 3 layers. The second document too have 3 layers , I am copying frames from first document to scrapdata using 'ICopyCmdData ' and 'kCopyCmdBoss'. I have 'Paste Remembers Layers' menu 'Checked' on Layer panel. I am using following function to copy frames to scrapdata.
    bool16 copyStencilsFromTheTemplateDocumentIntoScrapData(PMString & templateFilePath)
         bool16 result = kFalse;
            SDKLayoutHelper sdklhelp;
            PMString filePathItemsToBeCopiedFrom(templateFilePath);  //("c:\\test\\aa.indt");
            IDFile templateIDFile(filePathItemsToBeCopiedFrom);
            UIDRef templateDocUIDRef = sdklhelp.OpenDocument(templateIDFile);
            if(templateDocUIDRef == UIDRef ::gNull)                 
            ErrorCode err = sdklhelp.OpenLayoutWindow(templateDocUIDRef);
            if(err == kFailure)                 
            InterfacePtr<IDocument> templatedoc(templateDocUIDRef,UseDefaultIID());
            if(templatedoc == nil)               
            if(templateSpreadUIDList == nil)                  
            IDataBase * templateDocDatabase = templateDocUIDRef.GetDataBase();
            if(templateDocDatabase == nil)                  
            UIDRef templateDocFirstSpreadUIDRef(templateDocDatabase, templateSpreadUIDList->GetNthSpreadUID(0));
            InterfacePtr<ISpread> templateSpread(templateDocFirstSpreadUIDRef, IID_ISPREAD);
            if(templateSpread == nil)                 
            UIDList templateFrameUIDList(templateDocDatabase);
            if(templateSpread->GetNthPageUID(0)== kInvalidUID)                  
            InterfacePtr<ICommand> copyStencilsCMD(CmdUtils::CreateCommand(kCopyCmdBoss));
            if(copyStencilsCMD == nil)                
            InterfacePtr<ICopyCmdData> cmdData(copyStencilsCMD, IID_ICOPYCMDDATA);
            if(cmdData == nil)                 
            // Copy cmd will own this list
            UIDList* listCopy = new UIDList(templateFrameUIDList);
            InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
            if(clipboardController == nil)              
            ErrorCode status = clipboardController->PrepareForCopy();
            if(status == kFailure)                  
            InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
            if(scrapHandler == nil)                 
            InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
            if(scrapData== nil)                
            UIDRef parent = scrapData->GetRootNode();
            cmdData->Set(copyStencilsCMD, listCopy, parent, scrapHandler);
            if(templateFrameUIDList.Length() == 0)       
                return kFalse;      
                status = CmdUtils::ProcessCommand(copyStencilsCMD);    
            if(status != kFailure)
              result = kTrue;
            sdklhelp.CloseDocument(templateDocUIDRef,kFalse,K2::kSuppressUI, kFalse);
        return result;
    After this I need to close first document. Now I am opening the second document from indt file which has same number of layers as first document. I am trying to paste frames from scrap data to second document using '' 'ICopyCmdData ' and 'kPasteCmdBoss' as shown in follwoing function
    bool16 pasteTheItemsFromScrapDataOntoOpenDocument(UIDRef &documentDocUIDRef )
        bool16 result = kFalse;
               InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
                if(clipboardController == nil)
               InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
               if(scrapHandler == nil)               
               InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
                if(scrapData == nil)
                     //This will give the list of items present on the scrap
                UIDList* scrapContents = scrapData->CreateUIDList();
                if (scrapContents->Length() >= 1)
                    InterfacePtr<IDocument> dataToBeSprayedDocument(documentDocUIDRef,UseDefaultIID());
                    if(dataToBeSprayedDocument == nil)
                    InterfacePtr<ISpreadList>dataToBeSprayedDocumentSpreadList(dataToBeSprayedDocument,UseDef aultIID());
                    if(dataToBeSprayedDocumentSpreadList == nil)
                    IDataBase * dataToBeSprayedDocDatabase = documentDocUIDRef.GetDataBase();
                    if(dataToBeSprayedDocDatabase == nil)
                    UIDRef spreadUIDRef(dataToBeSprayedDocDatabase, dataToBeSprayedDocumentSpreadList->GetNthSpreadUID(0));               
                    SDKLayoutHelper sdklhelp;
                    UIDRef parentLayerUIDRef = sdklhelp.GetSpreadLayerRef(spreadUIDRef);
                    InterfacePtr<IPageItemScrapData> localScrapData(scrapHandler, UseDefaultIID());
                    if(localScrapData == nil)
                    if(parentLayerUIDRef.GetUID() == kInvalidUID)
                    InterfacePtr<ICommand> pasteToClipBoardCMD (CmdUtils::CreateCommand(kPasteCmdBoss));
                    if(pasteToClipBoardCMD == nil)
                    InterfacePtr<ICopyCmdData> cmdData(pasteToClipBoardCMD, UseDefaultIID());
                    if(cmdData == nil)
                    if(scrapContents == nil)
                    PMPoint offset(0.0, 0.0);
                    cmdData->Set(pasteToClipBoardCMD, scrapContents, parentLayerUIDRef );
                    ErrorCode status = CmdUtils::ProcessCommand(pasteToClipBoardCMD);
                    if(status == kSuccess)
                        CA("result = kTrue");
                        result = kTrue;
                }//end if (scrapContents->Length() >= 1)       
        return result;
         Here in above function its required to set Parent Layer UIDRef and because of this all frames are getting paste in one layer.
    Is there any way we can paste frame in there respective layers?
         Also I need to work this code with CS4 server and desktop indesign.
    Thanks in advance,
    Rahul Dalvi

    // dstDoc must be FrontDocument
    InterfacePtr<ILayoutControlData> layoutData(Utils<ILayoutUIUtils>()->QueryFrontLayoutData());
    InterfacePtr<ICommand> createMasterFromMasterCmd(CmdUtils::CreateCommand(kCreateMasterFromMasterCmdBoss));
    InterfacePtr<ILayoutCmdData> layoutCmdData(createMasterFromMasterCmd, UseDefaultIID());
    layoutCmdData->Set(::GetUIDRef(layoutData->GetDocument()), layoutData);

  • Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

    Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

    As per the information and details provided by you, when you copy & paste a data from server to Outlook, word, notepad, then you do not receive the Chinese text.
    For Outlook, please follow these steps: -
    Close and reopen Outlook in your western locale (or switch the windows system to your Western locale if you changed that),
    Manually change the message from Western to Chinese encoding, which you can do in all versions up to Outlook 2007.
    If you want to stay in your Chinese locale in Outlook 2007, then:
    After you hit reply, go to the Option tab > More Options.
    In the Encoding drop-down menu, select the Chinese encoding you are working in (Not the encoding used by the person who will receive the message)
    To set the Chinese locale in all versions up to 2007 the controls are under.
    Tools > Options. In Outlook 2010 File tab > Options > Advanced > International options.
    Unicode (UTF-8)
    is a good setting for multilingual users.
    Check the
    Auto select 2007)/ Automatically select (2010) encoding box.
    I hope this information will be helpful for you.
    Thanks and regards
    [email protected] 

  • Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?

    Message title says it: Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?
    I can't find anything in the Knowledge Base that says these two options no longer work or still do.
    I do not have a system capable of running Lion, but I need to know the answer nonetheless.

    Gee, I don't know: "paste attachments mail Lion"? ;-)
    One further question, if I may: in Panther (which is where I've aggregated nearly 7 years of mail), if you copy more than one file in the Finder, switch to Mail, and paste the files into a new message, only the file names paste in. If you copy one file and paste it into a Mail message, you get the file, not just the name. Is that still true, or has that (IMHO) bug been fixed since 10.3.9?

  • Can't copy-paste images from Noteshelf in iOS6

    I use an app called Noteshelf (v7.0). In iOS5, I was able to copy-paste pictures from Noteshelf into other apps, such as Keynote (v1.7.1) or in an email. However, since I upgraded to iOS6, this doesn't work anymore. As the versions of Noteshelf and Keynote are the same, the logical conclusion is that something has changed in the copy-paste functionality of iOS6. Can somebody tell me about this and, better still, give me a fix for it?

    Tell us how you are doing your copy and paste

  • Copy Paste only from Paint

     We have a w2008 R2 terminal server for a week now and clients make a vpn connection. They copy paste pictures from local to a Word 2010 document on the terminal server.
    Everthing function well before. Same clients and a w2003 terminal server with Word 2010. Users copy local picture (openend in Paint, Microsoft Photo viewer, Irfanview, etc.) and than copy paste it to a Word document on the terminal server.
    Now it does not work anymore accept when they opend it local in Paint. Only than they can copy the picture.  
    -I have checkt de properties on client
    -I have restart rdpclip.exe on Termnal server.
    -I have checked if it is a rights issue but it seems that it's not
    I realy like to find a solution for this because doing it with MSPaint is al lot of work for the people. 
    Does any has a answer for this?
    Your help will be appreciated.

    This one may help.
    copy-and-paste not working
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • I need to type in or copy/paste words from other languages (cyrillic for example) but when I do it the only thing I get is a "????????" instead of the word I want to type or insert. What should I do?

    That happens when I don't know how to write so I copy/paste words from other languages, it also happens when I copy words in other languages written in a Word document, and then paste it on a website using Mozilla. This doesn't happen when I use Internet Explorer.

    Well you second post was the correct question because I was going to say you got a second hand macbook pro, didn't change anything, and expected mail to work with your ISP.  The mail settings were thus those of the previous owner.  So you are correct to ask what your ISP's settings should be.
    Unfortunately I can't answer that.  You have to get that from your ISP.  They proably have a web page for it.
    You need to know:
    Incoming mail server (pop)
    Incoming mail server login name
    Incoming mail server password
    POP port
    Does is require SSL?
    Authentication for using POP server (probably password)
    Outgoing mail server (SMTP)
    Outgoing mail server login name (probably same as incoming)
    Outgoing mail server password (probably same sas incoming)
    SMTP port
    Does is require SSL?

Maybe you are looking for

  • Process purchase orders

    Hi all, our's is extended classic scenario,  one user is trying the open the PO through process purchase orders option, he entered the po number and then clicked on find. He is getting the message " no documents avail for search criteria". Here the P

  • How to get the co-ordinates(X-axis and y-axis) for irregular static map

    hi all, i am trying to get the co-ordinates like latitude and longitude which are used in google map in an irrregular Static Maps,and i also want to know how can i Get perfect location Depending on Coordinates which i given using Page items. can any

  • 3 way video conference from mac to pc

    I have a Power Mac G5, and have recently started video conferencing with my friend, who happens to be a PC user. We have both been video conferencing through Skype, and it works great... but is it possible to add a 3rd person to our video conference

  • Map ID with merged projects

    Hello, I'm working on merged projects for made one CHM for a software. I manage to merge the several chm, but now I've got a another problem with the topics ID I use to call help in the application. I create a file Map-ID for all my .chm, but I don't

  • Trouble calling htp in a web service procedure

    I have a procedure that I was calling directly within an APEX application that allowed the user to download XML files, as follows: PROCEDURE download_my_file ( p_resid IN VARCHAR2 , p_filename VARCHAR2 , p_filter_str IN VARCHAR2 DEFAULT NULL AS v_mim