Windows 8 - problems for accepting calls/emitting ...

Hi everybody,
First, I'm not a native English speaker, so sorry if I do some mistakes...
I have a big problem on my Skype. I tried many times to solve it, but without succes. The problem is, whenever I want to call someone, or to answer to a call... it does not work ! I have to call again and again again... till it works. Sometimes it works at the first call, but sometimes I have to call like 15 times in a row. Whenever it's not working, I can't hang up or do anything. All the buttons aren't working....
I have the latest version. I uninstalled it and reinstalled it a lot of times.
Thank you

I'm still waiting for an answer !

Similar Messages

Recovery to Windows Vista problem for my Satellite A200-10X

My computer was working OK. To speed it up, I decided to reformat the hard disk using the recovery DVD provided by Toshiba. The recovery failed. I have tried many many ways but keep having the same problem i.e. the process goes into a loop.
What happens can be summarized as follows: When I power-on the computer using the recovery DVD in disk drive, the computer goes into loading the windows files and then formats the hard disk, but stops about 18% through the progress. Everytime this happens the problem starts at (X:\Windows\system32\cmd.exe) where it is at ImageX Tools for Windows; and mentions that C:Program Files\Toshiba\HD2Go\sea160s_HD.wmv........WimCopyF ileEx failed. Other errors are: Error restoring image; The Drive is not ready; and ERROR: ImageX could not apply VISTA E:\05006XSP.swm Index 2 from ODD to C:\!; press any Key......And the screen goes white. There is another screen window when ithis happens, which says Administrator: X:\Windows\system32\cmd.exe open in DOS. After closing this window the Screen goes blank and the computer for while and then opens in a window called Windows Boot Manager, and says that windows failed to start, winload could not be loaded because the application is missing or corrupt.
If I try booting from the recovery HDD, there is no success. I tried powering the computer while pressing C, or pressing 0(zero) or F8, but no success. I can not go to the page where I can repair the HDD as mentioned in the users manual.
I even tried loading an old version of XP, which got loaded but would not recognize the USBs, or sounds, or DVD drive, etc.
Please help.

Hi!
Can you try a Windows XP installation disk with SP2? I think its normal after using a Microsoft installation disk and the sound will not be recognized because you need all drivers from the Toshiba website.
What you can also do is to use Microsoft installation disk, format the HDD and then use the recovery disk.
In my opinion this could be caused of a faulty recovery DVD or a faulty HDD/RAM. The hardware you can test with the Drive Fitness Test and Memtest86 (use Google for download links, all its freeware).
Bye

Problem for Bapi Call in Integration Scenario

Hi
I am creating an Integration Scenario at Design time which can be used during configuration time.In the Int. Scenario, I am using a Int Process(BPM). I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action in Int Scenario??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

> Thanks for ur reply. I am trying to follow the suggestion given by u. U have specified that the BAPI in R/3 system has to be inserted as an application component. But I am unable to do that. I am using IDES system for the BAPI,but in the selection screen for the Application Component we have only instances of installed product in the SLD. So how to find out the application component to be imported.
>
What you need to do is, first of all your import the BAPI (RFC) into XI system. (I hope you must be knowing how to import the RFC & IDOCs into XI system). Make sure this BAPI is remote-enabled under attribute TAB in R3 ---> SE37.
Now this imported BAPI (RFC) will be used in your message interfaces and this message interface will be used inside ACTION. And then you can use this action in your Integration Secnario as mentioned in the picture above in my first reply.
Sorry for the confusion, you need to R3 business system name rather inserting the BAPI as a business system under 3rd swim lane.
> And another problem is that I have to create an action for in the application Component containing BAPI and then it should be connected to the action in BPM for interaction. I have created one action for this and given the BAPi as both outbound and inbound interface. Is this the proper way to do this???
>
As mentioned above, after you import the BAPI (RFC) in XI you can create the messge interface. There should be two Message Interfaces. One for sending the request and other for receiving the response message.
Regards,
Sarvesh

Problem to accept call.........

Frnds I have a problem with my 5800 xpressmusic plz suggest me to solve the prob......
I can't accept any call, can't stop alarm, can't stop reminder, can't stop to do note, can't unlock phone by tapping the unlock button when keypad is lock in version 40.0........
Solved!
Go to Solution.

It's like Krizanand said. Take a look here and you can learn your friend how to do it: http://www.youtube.com/watch?v=0bca1ebhGB8

Problem for ResourceBundle calling from jsp file

Hi, I am using WebLogic 5.1 in Solaris 8
          I use java.util.resourceBundle to get the information from a .properties
          file
          I put the properties file in /opt/weblogic/myserver/serverclasses
          When I call the properties file from EJB, It seems to be OK
          But when I call the properties file from JSP using the same script, It said
          the properties files not found
          The Error message is:
          <ServletContext-General> Servlet fail
          ed with Exception
          java.util.MissingResourceException: Can't find bundle for base name
          test.dbini,
          locale zh_TW
          at
          java.util.ResourceBundle.throwMissingResourceException(ResourceBundle
          .java:707)
          at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:679)
          at java.util.ResourceBundle.getBundle(ResourceBundle.java:546)
          at
          jsp_servlet._test._global_95_variable._jspService(_global_95_variable
          .java:85)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:105)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:123)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:742)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:686)
          at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
          ContextManager.java:247)
          at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
          a:361)
          at
          weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          PLease Help!!
          Regards,
          Fannie


Hi,
open dataset file for input in text mode.
check sy-subrc = 0.
while sy-subrc = 0.
read dataset file into wa.
if sy-subrc = 0.
append wa to itab.
else.
    exit.
endif.
endwhile.
close dataset file.
regards
Siggi
PS: check also the F1-help for open, read and close statements!

Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.

Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you.

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer.

Problems with accept () system call in Solaris 10

We are doing some prototyping in Solaris 10/Zones using TCP sockets and have encountered the problem the "accept" system call in Solaris 10 always seem to return immediately without waiting for clients to connect to it. The same program works fine under Solaris 9 without any problems.
So in the following call:
ssock = accept( sockfd, (struct sockaddr*)bind_address, &alen );
if( ssock < 0 )
printf( "Accept failed: ...\n" );
the program always prints "accept failed: " continuously. Is this a known issue?

The problem only occurs when we use INADDR_ANY to bind a socket. The program works as expected when we use real as well as virtual IP address configured for an interface on any Solaris Zone. When we use INADDR_ANY, error number is 14 (EFAULT, Bad Address).
Just wondering if we need to make any configuration changes in order to allow INADDR_ANY to work.

HT1414 i restored my iphone now i cant accept calls or call out whats the problem?

i restored my iphone now i cant accept calls or call out whats the problem?

Hey retrothakid,
Thanks for the question. I understand that you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thanks,
Matt M.

ITunes won't open, "windows is checking for a solution to the problem."

I attempt to open up iTunes, and it thinks about it, loads for about 6 seconds, then comes with a window, first saying "Windows is checking for a solution to the problem," then after it loads, it says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Obviously it doesn't notify me. This has been happening to me for about 2 months. I am very very sad, and just want to go on my iTunes. Someone please help me!! Thank you!

i'm not sure either. i am also running Windows 7 Ultimate 64 Bit but havent had any problems.
try contacting @BlackBerryHelp
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Accept call problem?

plz kindly reply, when i press accept receiving call its goes to yellow reject option? and my call reject i dont know every thing works fine, thanks
Solved!
Go to Solution.

yes i did re-calibrating the touchscreen, also i remove battery for 1 minute and than again, after all its not help. when someone call me there are two option ,green accept,,and yellow reject,, but when i wants to accept call and touch green ,,nothing happen i keep try pressing green ,green,, but no,, and if i only JUST touch yellow reject its work , and its reject,,, so in short only problem accpet call?

Please how can i fix my DVD problem for window 7 cq56

how can i fix my DVD problem for cq 56 107 SA windows 7? it is selecting disc.

What is the problem... can you please tell us in detail???
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Windows 8 - problems for accepting calls/emitting ...

Similar Messages

Maybe you are looking for