Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)
Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3
Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.
Similar Messages
-
An error occured while generating SSRS report.Please advice.
unable to connect to the remote server a connection attempt failed because the connected party dd not properly respond
after a period of time, or established connection failed because connected host has failed to respond 69.172.201.134:8080Sounds like it's not able to connect to a server it needs to connect to. Check to see if all the required servers are up and running and accessible to the network.
-Tab Alleman -
Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
[WPSL]Windows App Certification Kit Test Fails, binary is built in debug mode
Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.
Hi ranjit,
>>Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1
Okay, this may be due to the upgrading process, could you tell us what the detailed version of your Visual Studio is(for example: Visual Studio 2013 Update 4)?
You may need to create a new Windows Phone 8.1 Silverlight project and try to upload it to Store, if this problem can be resolved, I think this should be related to the upgrading process, you may need to start from scratch by recreating a WP8.1 SL project.
To exclude environment facts, I would also suggest you retesting it on a new machine with the latest IDE.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows App Certification Kit Test Fails, binary is built in debug mode
Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit. -
Inconsistent results with Windows App Certification Kit
Hi, I asked about this issue before on a different forum but didn't get a response. Support pointed me towards this forum so I'm asking here as maybe the other forum wasn't the appropriate one. My company is attempting to renew our ms partnership, and we are
trying to certify our desktop
app for windows 8. I have attached a screen shot below showing the registry entries that our app makes. When we try to test for certification (windows 8) we get the different (but similar) results on different systems using the exact same installation package.
Here is an example of the results we get:
Results:
An optional value 'VersionMajor' is missing or invalid for program Chiro8000.
An optional value 'VersionMinor' is missing or invalid for program Chiro8000.
An optional value 'MajorVersion' is missing or invalid for program Chiro8000.
An optional value 'MinorVersion' is missing or invalid for program Chiro8000.
A non-optional value 'DisplayName' is missing or invalid for program Chiro8000.
A non-optional value 'Publisher' is missing or invalid for program Chiro8000.
A non-optional value 'ProductVersion' is missing or invalid for program Chiro8000.
An optional value 'InstallLocation' is missing or invalid for program Chiro8000.
Can anyone point us in the right direction?How did you publish this package? Here are some similar questions, maybe caused by installer:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
http://www.advancedinstaller.com/forums/viewtopic.php?f=2&t=21368
http://www.advancedinstaller.com/forums/viewtopic.php?f=2&t=29782
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e61c393d-e5af-4fee-ad8b-29c36e889043/windows-app-certification-kit-tests-fail-for-desktop-app-installed-from-msi?forum=windowscompatibility
Best Regards,
Please remember to mark the replies as answers if they help -
Sysprep error in windows 7 a fatal error occured while trying to sysprep the machine
please any one help me i am struggling last 3 day with sysprep command,
I want to sysprep the windows7 system which is genuine professional version and updated with Microsoft patches, i installed all applications and drivers to that system,
When i doudle click sysprep icon selected oobe /generalize/reboot
Then it give error a fatal error occured while trying to sysprep the machine
then i checked log file in prefeth folder
2009-11-24 16:17:22, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2009-11-24 16:17:22, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
please help me........Solution for the sysprep fatal error is to clean partner folder i.e. Go to Sysprerp folder i.e.
c:\windows\system32\sysprep\partner
Check below guide for more info...
http://www.vmwareandme.com/2013/10/solution-windows-8-and-windows-81-fatal.html
http://www.vmwareandme.com/2013/10/guide-fatal-error-occurred-while-trying_23.html
www.mytricks.in -
Itunes update 10.5.2.11 for windows 7 (64 bit) keeps crashing at this point...
"an error occurred while attempting to create the directory: C:\ProgramData\microsoft\windows\start Menu"
I have read all of the forums to no avail. Seems like a common problem.
Has anyone had the same issue and actually solved it?I'm getting this problem too. I have been running iTunes for a few years with no problems until recently. WHenever I try and open it I get an error message saying "An error occured while attmpting to create the directory: I:\iTunes\iTunes.Resources\de.lproj\EQWindow.nib" with the options to retry or cancel. Retry just results in the same error message occuring again.
I've tried other programs on the I: drive and they work fine, I've also followed the 'Removing iTunes Configuration Files' and some of the other apple support guides with no success. My windows updates are fine.
Any suggestions? -
An error occurred while trying to start the Windows Deployment Services server
After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST. -
Error occurred while generating PDF. Reason: ERROR_PDF_CONVERSION
I get an error generating my PDF whenever someone's name has a special character's in their name such as accents and diacritics.
Is this a bug or how do I properly set the charset for the <cfhtmltopdf> tag. I didn't have this issue with Coldfusion 9 and cfdocument. Any help in this regard would be much appreciated.
version: Coldfusion 11 Update 3 on Windows Server 2008 R2 on IIS 7.5
SEE STACK TRACE BELOW
coldfusion.document.webkit.PDFgErrorHandler$ServiceManagerConversionException: Error occurred while generating PDF. at coldfusion.document.webkit.PDFgErrorHandler.handleConversionError(PDFgErrorHandler.java:1 88) at coldfusion.document.webkit.HttpPDFRequestHandler.requestPDFGeneration(HttpPDFRequestHandl er.java:113) at coldfusion.tagext.lang.HtmlToPdfTag.processPDFgRequest(HtmlToPdfTag.java:1331) at coldfusion.tagext.lang.HtmlToPdfTag.handlePDFgConversionRequest(HtmlToPdfTag.java:1466) at coldfusion.tagext.lang.HtmlToPdfTag.convertToPDF(HtmlToPdfTag.java:1413) at coldfusion.tagext.lang.HtmlToPdfTag.doEndTag(HtmlToPdfTag.java:1551) at cfcfhtmltopdf_createPDF2ecfm2090701148.runPage(c:\inetpub\wwwroot\myapp.com\includes\docs \cfhtmltopdf_createPDF.cfm:25) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:736) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:572) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2986) at cfmethods2ecfm1148258034$funcSAVEPROXY.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\docs\ methods.cfm:472) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:420) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2424) at cfmethods2ecfm1658643382$funcPROCESSSTEP.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\mem berResults\methods.cfm:377) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:251) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:480) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:42) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:142) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:30) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:156) at coldfusion.xml.rpc.CFCServlet.doPost(CFCServlet.java:348) at javax.servlet.http.HttpServlet.service(HttpServlet.java:646) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:199) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:314) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.lang.Thread.run(Unknown Source)Does anyone have any suggestions?
I've tried:
adding charset meta tags to the top of my outputted HTML contents that comprise the PDF
I've tried adding the <cfprocessingdirective pageencoding="utf-8" /> but doesn't seem to help.
#encodeForHTML(pdfHTMLVariable)# and even just tried encoding the individual variables that contained the special characters but that didn't seem to help anything as encoding them still won't work I'm assuming if the Charset is mis-matched.
Does the <cfprocessingdirective pageencoding="utf-8"> just have to be within the CFC method or does it need to be within the <cfhtmltopdf> tag?
Any input or things to try would be much appreciated as this is a regression for our app.
**As a side note: I would still just use CFDOCUMENT, but there was a different issue where the images were outputting a RED X where the image is supposed to be. Which from what I have been able to uncover has something to do with the server certificate not being trusted or something. However, our SSL provider is listed in the ROOT Certificate Authorities so not sure what's going on with that. Those images were being output with cfimage action of writeToBrowser .
I'd really like to fix the encoding issue does this have anything to do with language packs or missing languages of that sort? My app displays the page just fine when the UTF-8 charset meta tag is set. -
On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions. -
Error - An error occurred while attempting to establish an Applications Fil
ERROR:
An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_WIN2000. There may be a network configuration problem, or the TNS listener on node FNDFS_WIN2000 may not be running. Please contact your system administrator.
When I try to submit concurrent request error occured which I mentioned above.
Platform:Windows2000 server
Apps Version:11.5.3 Vision
Db version:8.1.6.0.0
Environment:Windows2000 server(Stand aloe).
I have one listener in database, I am sending you to my tns and listener files.
DB listener and tns file.
# LISTENER.ORA Network Configuration File: J:\oracle\visdb\8.1.6\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_VIS =
(SID_DESC =
(SID_NAME = VIS)
#(ORACLE_HOME = J:\oracle\visdb\8.1.6)
SID_LIST_VIS =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = J:\oracle\visora\8.0.6 )
( PROGRAM = J:\oracle\visappl\fnd\11.5.0\bin\fndfs.exe )
( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1' )
STARTUP_WAIT_TIME_APPS_VIS = 0
CONNECT_TIMEOUT_APPS_VIS = 10
TRACE_LEVEL_APPS_VIS = OFF
LOG_DIRECTORY_APPS_VIS = J:\oracle\visora\8.0.6\net80\admin
LOG_FILE_APPS_VIS = APPS_VIS
TRACE_DIRECTORY_APPS_VIS = J:\oracle\visora\8.0.6\net80\admin
TRACE_FILE_APPS_VIS = APPS_VIS
VIS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = win2000)(PORT = 1521))
# TNSNAMES.ORA Network Configuration File: J:\oracle\visdb\8.1.6\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
VIS =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = win2000)(PORT = 1521))
(CONNECT_DATA =
(SID = vis)
Client Site tns and listner.
# TNSNAMES.ORA FOR APPLICATIONS
# Created by Rapid Install
# Net8 definition for the database
VIS =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = win2000)(PORT = 1521))
(CONNECT_DATA =
(SID = VIS)
FNDFS_WIN2000 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=win2000)(PORT=1523))
(CONNECT_DATA=(SID=FNDFS))
Rep60_VIS,Rep60_VIS.world=(ADDRESS=(PROTOCOL=tcp)(HOST=win2000.apps.com)(PORT=7002))
# LISTENER.ORA FOR APPLICATIONS
# Created by Rapid Install
# Net8 definition for FNDFS listener
SID_LIST_VIS =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = J:\oracle\visora\8.0.6 )
( PROGRAM = J:\oracle\visappl\fnd\11.5.0\bin\fndfs.exe )
( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1' )
STARTUP_WAIT_TIME_APPS_VIS = 0
CONNECT_TIMEOUT_APPS_VIS = 10
TRACE_LEVEL_APPS_VIS = OFF
LOG_DIRECTORY_APPS_VIS = J:\oracle\visora\8.0.6\net80\admin
LOG_FILE_APPS_VIS = APPS_VIS
TRACE_DIRECTORY_APPS_VIS = J:\oracle\visora\8.0.6\net80\admin
TRACE_FILE_APPS_VIS = APPS_VIS
Any help I appreciate in advance, I have been working on this issue since one week.
Thanks,
Kindest Regards
Zeeshan SiddiquiThis is my env file
echo off
REM $Header: envshell.cmd.NT 115.0 2000/04/15 02:04:09 wdgreene noship $
REM +===========================================================================+
REM | Copyright (c) 1999 Oracle Corporation, Redwood Shores, California, USA
REM | All Rights Reserved
REM | Applications Division
REM +===========================================================================+
REM |
REM | FILENAME
REM | envshell.cmd
REM |
REM | DESCRIPTION
REM | This command script is used to create a command prompt with the entire
REM | environment set for the VIS APPL_CONFIG
REM |
REM | NOTES
REM | This command line file is for Windows NT.
REM |
REM
SET LOCAL=VIS
SET PATH=J:\oracle\visappl\fnd\11.5.0\bin;J:\oracle\visappl\ad\11.5.0\bin;J:\oracle\visappl\au\11.5.0\bin;%PATH%
REM Run the VISsys.cmd file to set the environment
REM to point correctly to the VIS APPL_CONFIG
IF NOT EXIST J:\oracle\visora\8.0.6\VIS.cmd GOTO skiporacmd
CALL J:\oracle\visora\8.0.6\VIS.cmd
REM Run the VISsys.cmd file to set the environment
REM to point correctly to the VIS APPL_CONFIG
IF NOT EXIST J:\oracle\visappl\VIS.cmd GOTO nobatfiles
CALL J:\oracle\visappl\VIS.cmd
:skiporacmd
:nobatfiles
REM Create a new command prompt with our current environment.
REM This cmd process will go away automatically.
START cmd.exe
GOTO theend
:noconfigfiles
ECHO This script requires the following files:
ECHO
ECHO J:\oracle\visappl\VISsys.cmd
ECHO J:\oracle\visappl\VISora.cmd (optional)
ECHO
:theend
=====================================================
When I typed tnsping80 fndfs_win2000 it's returned OK .
When I try to connect apps/apps@fndfs_win2000 from SQL/PLUS
it returs :
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect
descriptor.
I created another listener for APPS through Network Manager.
Please let me know at your earliest Convenience.
Regards
Zeeshan -
An error occurred while attempting to establish an Applications File Server
Hi,
I have following problem with concurrent manager logs and outputs (I am on R12, windows):
"An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_APPLTOP_eviasl. There may be a network configuration problem, or the TNS listener on node FNDFS_APPLTOP_eviasl may not be running. Please contact your system administrator."
There is plenty of similar threads and several metalink notes (including below) about it, but mine seems to be slightly different issue.
Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection" [ID 117012.1]
As you can see from error message it says node name is FNDFS_APPLTOP_eviasl, but uname -n returns only eviasl. Where this APPLTOP is coming from?
J:\oracle\VIS\inst\apps\VIS_eviasl\ora\10.1.2\network\admin\tnsnames.ora contains entries like below one (whole file is very long, but it does not contain entry with APPLTOP):
FNDFS_eviasl = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=eviasl)(PORT=1626))
(CONNECT_DATA=(SID=FNDFS))
Another tnsnames from ORACLE_HOME contains only below entry:
rep_eviasl_VIS_eviasl_TOOLS.xxxxxx.xxx=(ADDRESS=(PROTOCOL=tcp)(HOST=eviasl)(PORT=1950))
Yesterday I had issue with concurrent manager, so I was running adcmclean to fix it and this issue started after that.
Any help would be appreciated.
Regards
Piotr
Edited by: PiotrekJ on 02-Jul-2012 12:07OK, I was wrong - autoconfig finished with errors.
Result : SUCCEEDED
===========================================================================
===========================================================================
[ Config tool : j:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin\adgentns.pl ]
Command : j:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I j:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I j:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I j:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I j:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I j:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I j:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread j:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin\adgentns.pl PASSWORD contextfile=J:\oracle\VIS\inst\apps\VIS_eviasl\appl\admin\VIS_eviasl.xml logdir=J:\oracle\VIS\inst\apps\VIS_eviasl\admin\log\07031815 outdir=j:\oracle\VIS\inst\apps\VIS_eviasl\admin\out\07031815
Action : execute
SCRIPT RETURNED:
Generate Tns Names
Logfile: J:\oracle\VIS\inst\apps\VIS_eviasl\admin\log\07031815/NetServiceHandler.log
Classpath : j:\oracle\VIS\apps\apps_st\comn\java\lib\appsborg2.zip;j:\oracle\VIS\apps\apps_st\comn\java\classes
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temporary tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
.end err out.
And the end of report
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
j:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin\adgentns.pl 2
No of scripts failed in CVM phase: 1
AutoConfig is exiting with status 1
I did run autocfg after cleaning FND_NODES. Can you also tell me how to run autocfg for DB? I am guessing I was always doing it for APPS (one from inst dir).
Regards
Piotr -
An error occured while trying to copy the needed DB driver jar files
When I try to run my web app, I see this error in the Output window.
Creator will also put up a window essentially saying that I don't have a particular
data source. But I do have that very data source there.
The error seems to be pointing to this line in my build-impl.xml file
<nbdeploy debugmode="false" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}"/>I'm using postgresql-8.1-404.jdbc3.jar
I started this project with Creator2, so I don't know if the nbproject files
are out of date or anything.
Here's the output text:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
Copying 1 file to /home/tc/dev/oms/src
library-inclusion-in-archive:
library-inclusion-in-manifest:
Copying 1 file to /home/tc/dev/oms/build/web/WEB-INF/classes
load-project-properties:
installGraphics:
installLayouts:
compile:
compile-jsps:
pluto-hack-web-xml-run:
portlet-container-deploy:
jsCreatorDist:
run-deploy:
An error occured while trying to copy the needed DB driver jar files.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Exception=Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: An error occured while trying to copy the needed DB driver jar files.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:139)
... 10 more
/home/tc/dev/oms/nbproject/build-impl.xml:799: Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
BUILD FAILED (total time: 7 minutes 21 seconds) -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html
Maybe you are looking for
-
Getting back my old data after HD crash
I've just erased my mac hard drive becuase it was corrupt and re-installed OSX, I did the simple erase with the disc utility. I know the data still exists on my hard drive and will just be over written with new data when it comes along. Is there any
-
Analysis of Active Availability Control
Hi PS gurus, I'd like to know what is the meaning of the columns in the Availability Control Analysis report (accessible via Extras --> Availability Control --> Analysis in CJ30 or Cj32) NWA 4054504 0020
-
in the modulepool program for my custom infotype 9050, I have defined a field symbol like below in the top include. FIELD-SYMBOLS: <PNNNN> STRUCTURE P9050 DEFAULT P9050. still it is showing <PNNNN> is unkown. Seconldy, can anyo
-
Database Configuration Assistent and JVM
Hi Is it possible to tell Database Configuration Assistent to install JVM 1.4 instead 1.3 during creation of new database in Oracle DB 9.2
-
Active 4.0 - dll is not re-registered
I have TestStand 4.0 and 4.1 installed in my system. Using the TestStand Version Selector I am trying to Make 4.0 Active. I get the report as:The following is a list of files that were not re-registered. You might not have these files due to the inst