Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Similar Messages

Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

Hi btgclark,
I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
Please let me know how this works out for you, thank you.
I worked on behalf of HP

I have tried to update my iPod Touch 4G to the latest update. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?

I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
Adam

If you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install.

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows Blue Screen Error

Just updated my laptop (windows update and update to iTunes 10. Now when I connect to my laptop (via USB) I receive the Blue Screen Error. iPhone is running the 4.0.2 software. This is very familiar to an issue with the iTouch earlier this year and Apple had to send out an update. I hope I am the only one with the issue but one blue screen tends to led to several more...

Well, I have done all of the un-install and re-install of iTunes 10 and both my PC and laptop crash when connecting my iPhone. Spent one hour on the phone with Apple Care Expert and still no resolve. Just can't sync my calendar for work etc. At least I don't have an issue with my iTouch. Just seems strange to me that the issue affects both of my computers and know else is having the issue.

Windows blue screen error apc_index_mismatch when ...

dear sir,
when we connect nokia N8 to media transfer mode to windows 7
then blue screen error shows in windows apc_index_mismatch
we are not able to transfer music to my N8 from nokia music
please suggest solution

Please ensure that you have the latest version of Nokia Suite installed on your computer, to download this goto: http://nokia.com/nokiasuite
And also ensure that after installing the updated Nokia Suite, that your Nokia N8 is up-to-date by checking if there are any firmware updates prompted to be installed via Nokia suite, and to update accordingly.

Satellite P20-771: Blue screen error message after OS reinstalling

I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
Thank in advance for your help
Roberto

Hello
I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
1. you have installed some additional software that causes bluescreen or
2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

Windows Blue Screen - when trying to re-sync an IPOD after doing 5 R's

My windows based Itunes failed to recognize my ipod, so I trouble shooted and finally ended up doing the 5 R's.
This resulted in a "Blank Ipod" (after restore).
I was able to successfully get Itunes to recognize my ipod after the restore. That is when a "major problem" occurred.
When my 37 gigs of MP3s on my PC attempt to automatically update onto my "blank ipod", my system crashes giving me the dreaded windows BLUE SCREEN! The error messgae indicates that a physical memory dump occurred and the system shuts down.
I figure it has something to do with all of those gigs trying to update onto the ipod. SO, I start to manually transfer (drag and drop) about 100 mp3s at a time onto the ipod within itunes. It still crashed after the 3rd batch of 100 mp3s.
Has anyone experienced this? Does it have anything to do with Mirosoft's newest IE vunerability? I use Firefox usually, but sometimes HAVE to use IE. What can I do?
This really *****.
thanks for your help.
Zeppy
Dell Dimension Windows XP

hi zeppy!
hmmmmmm. a 0x7E? that's not the most commonly reported BSOD code here.
but the MS KB seemed to have at least one clue for us.
(1) sometimes people can get blue screens when they plug in an ipod if their FireWire, USB, or dock has gone bad. i see from that STOP message resource that the 0x7E can be associated with dodgy USB.
by way of tracking down that possibility, do you still get the BSOD if you connect to a different port? (or, if you've got a dock, connect directly to a port instead?)
(2) on general principles, we'd better check for malware. download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer online scans, run those as well. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
(3) especially if you've recently installed any new hardware on your PC, head into Device Manager to check to see if there's any alert/warning messages showing up next to any of your devices. if you see any, what do they say?
(4) let's also let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence for the Apple engineers to analyze.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
It says:
================================================================================
Problem has been detected and windows has been shut down to prevent damage to your computer.
Problem seems to be caused by the following file: nv4_disp
If this is the first time you’ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
Technical information:
** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
nv4_disp
beginning dump of physical memory
physical memory dump complete.
contact your system administrator or technical support group for further assistance.
==================================================================================
It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself.
Someone please tell me what's wrong with my computer and if I can revive it at all.
Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
Thanks so much for reading a long message.

marissa07, welcome to the forum,
marissa07 wrote:
......snip..
================================================================================
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
==================================================================================
Have you tried updating your graphics driver?
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

A60: Blue Screen error message after recovering procedure

i have an A60, and over the last 3 months i have ran the recovery disk 10-15 times, windows installs fine, then a few days later the computer either freezes and gives a blue screen of death when you try to turn it on, or it starts up and comes up with a message saying "windows explorer has encountered a problem" and then completely stops responding, or gives a similar message regarding something called Dr Watson Kernal Debugger and equally, stops responding, now. having tried formatting and scanning as well as getting on my knees and begging the computer to please please please work, i am out of ideas, maybe the hard drive is the problem? is it a common A60 fault?
also in a completely unrelated issue, where can i get a new "c" key, mine keeps falling off for some reason.

Hi
Usually the blue screen appears because of a serious software or hardware malfunction.
In you case I suggest that there could be something wrong with the hardware. Of course there could be also something wrong with the HDD. But to be 100% sure you should contact the Toshiba service. He can make some diagnostic tests.
You can also order the additional keyboard buttons from the Toshiba service partner who is responsible for your country.

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

Com shows blue screen error message when ipod touch is plug in

hey, anyone has this problem?
when i plug in my ipod touch, a message "new hardware is found" with name (still digital cam). then the com switches to a blue screen with error messages.
i need some help please.. thanks

One cause of this is that you have saved a picture on your Touch when browsing the internet on Safari (by holding down on the image & selecting save). These saved images seem to cause a glitch and the PC thinks you have plugged a digital camera in causing the PC to crash. Don't know of an actual fix yet. The only work around is to delete the pics prior to plugging in the Touch. If you really want the pic just email it to yourself via wifi first. Funnily enough it is not a problem if the pic was on your pc and you synced it to the Touch via iTunes.

Windows Live Mail error message appears in subpage

I am getting an error message when I try to go from an email message to a sub page and the sub page will not load.
The message in a box says "X There was a problem sending the command to the program" and when I click on OK an Internet Explorer heading is shown with "connecting" in the tab and the rest of the page is blank. The page does not load.
Can anyone suggest a solution?
Thanks
ronswold

Hi mate
If you would search for this error message (There was a problem sending the command to the program) on google page then you would get a lot of hits.
Seems that you are not the only one who gets the error message but this has nothing to do with your Toshiba notebook but with the Windows OS.
In most cases an firewall causes this issue possibly you have installed Zonealarm or something like this
Check this and remove or disable the settings which could prevent the software from loading.

ITunes 8:Windows Vista displays a blue screen error message when connec

Right...I have read the support page regarding to the problem, and it told us not to use itune8setup or itune864. What can I use, where can I find it as the i-tune download page downloads the itune8setup file...
thanks

So, I went to the page you posted and worked through the 'burn a DVD problem'.
I was able to create a pure AVI project, and burn it to a folder and then burn it to a disc. This disc would not play on a DVD player, which is what I am aiming for.
I also defragmented the hard drive.
So, I thought I'd try the original burn again: Share to DVD. It did not work again.
So, I am thinking that the photos are definately too large, however it did make the AVI project, so does this eliminate the possibility that the photos are too big?
Strange though, because the very 1st time I burned this project, it did do it!! But not since!
What do you think?

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Similar Messages

Maybe you are looking for