Windows boot error code 0xC00000e9
When booting from windows 7 Installation DVD source in my Windows server 2008 R2 there is an error pertained-Error code 0x00000e9-File: \Boot\BCD (An unexpected I/O error has occured).What is this error? What is the remedy for this?MumthazMuhsin
Hi,
Did you want to install Windows 7 on your Windows server 2008R2?
The error message: An unexpected I/O error has occurred. Status: (0Xc00000e9)
is a hardware error pertaining to your system’s BIOS. Basically it is telling you that the computer is not able to reliably communicate with the hard drive.
I suggest to update BIOS to the latest version, and try to rebuilt BCD follow these steps in this thread:
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/0e6a7b6a-70de-41af-b2c8-5f8f3c86cef7/
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
Windows update error code 8e5e0147 help!
I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?
Please review this previous post:
Cannot install some Windows updates, error code 8e5e0147
Carey Frisch -
Windows NT Error code = 87 when stopping Oracle9iASHTTPServer service
We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine.We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine. -
Windows update error Code 80072EF3
Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zipHi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support -
Windows phone error code 80188301,. please need help
i am getting an error while updating my windows phone. windows phone error code 80188301,.
please need helpHi,
If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
http://www.windowsphone.com/en-US/how-to/wp-support
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
The system cannot find the file specified.Windows sockets error code:2.
Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain -
Getting Error while doing Control Panel - Windows Update Error code is 80070103
Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
Microsoft - Other hardware - WinUsb Device
Please provide your email ID to send the Error screen shot.Hi!
Check the following link to see if it solves your problem:
http://support.microsoft.com/kb/952032
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin -
My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a
my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a fix for it.
Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP. -
Windows boot error 0xc00000e9, 0xc0000098 in Lenovo U400
I've been getting boot error in my 8 month old Lenovo U400. No changes were done in hardware or software. It says bootbcd file is missing. Doesn't boot through hardware, but boots just well when I go to advanced boot menu and select the SSD option. The functioning of the laptop seems to be just as good, fast and there's no problem whatsoever after I boot through this. Then why doesn't it boot normally? Why does it say it could not find a valid OS entry??
I tried resettting the boot file. During the process I noticed that the partition with the OS is marked hidden and is a RAW partition, rather than NTFS. Since this error, I haven't been able to use Lenovo one key recovery either. I have never reinstalled/formatted a system with SSD, and am not quite sure if a clean reinstallation of Win OS would help.
What should I do?The moment you selected your drive to boot from start pressing F8 button, it should show you some extra boot options, where should be a repair option. Go there, it might ask you login, then there will be option to fix startup problems.
-
Windows update error code 800B0100
I received updates last nite, and all installed except for "Update for Windows junk e-mail filter for X-64 based systems (December 2007) KB905866"
I downloaded it from the MS site, and tried to install it manually, but it too failed.
The error code translates into " No signature was present in the subject"
Does this mean that the download is corrupted?Hi,
I just would like to confirm if you are using X64 bit version of Windows Vista? There are two versions x86 and x64 for this update, please visit the following website to clarify.
Description of the definition updates for Windows Mail
http://support.microsoft.com/kb/905866
If your Windows Vista is a X64 based system and this update is indeed has not been completely installed, I would like to provide you with the following steps to manually download and install it.
Step 1: Download this update directly from the Download center manually but temporarily do not install it.
Please choose the correct version and download the KB905866 update to your local disk but temporarily do not install it, try Step 2:
Step 2: Log onto the computer in Safe Mode.
Restart the computer. Keep pressing the F8 key until the Windows Startup menu appears. Choose Safe Mode, and press Enter.
After booting into Safe Mode, please locate to the downloaded installation file and install them manually one by one.
If it still cannot be installed, please let me know the detailed error message.
Thanks and hope this helps.
Sincerely,
Robbin Meng
Microsoft Online Community Support -
Windows 7 error code 0x80070017
Trying to install Windows 7 on my 2011 MacPro using Boot Camp Assistant. Using a download purchase of Windows 7 Pro burned onto a DVD. Installer runs but eventually stops on an incomplete Step 2 (Expanding files I think) with Error Code 0x80070017.
Please help!Thanks for the quick reply. So you're saying:
- Use Disc Utility for the DVD burn (I used Toast and my IT guy used something Dell I suspect) at it's slowest speed?
- Remove the other internal hard drives for the Windows install?
- I'm creating a Windows "BOOTCAMP" partition on my main system drive for this. Can't really spare another internal for this if at all possible. -
Hello,
I am getting Error Code 57E when using Windows Update. The only update that doesn't install is KB2863911.
I am running Windows 7 64-bit and Office 2013 64-bit.Hi，
With err exe, I found the error code represent "Cannot create a top-level child window" which means that a required Permission for Full Control might be missing for a component that it is trying to update.
I suggest you tempbrarily disable any anti-virus software, then download the update from Microsoft website then manually install it again.
Or you can install Office 2013 upate in Windows clean boot to check the result.
http://support.microsoft.com/kb/929135
And the issue is more like a office issue, if issue persists, I suggest you post in the following forum for they're more familiar with this kind issue.
Microsoft Office
http://social.technet.microsoft.com/Forums/en-US/home?forum=officeitpro
Yolanda Zhu
TechNet Community Support -
Dual Boot Windows Boot Error (Required Device Inaccessable)
I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
Last edited by jiewmeng (2012-05-09 04:01:04)jiewmeng wrote:I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
https://bbs.archlinux.org/viewtopic.php?id=140730
https://wiki.archlinux.org/index.php/GR … mand_shell
http://axel668.blogspot.com/2011/03/how … grub2.html -
Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?
No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2. If you receive a notification from User Account Control simply click Continue.
3. At the command prompt, type the following, commands and then press ENTER after each command.
net stop wuauserv
net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1. At the command prompt, type the following commands, and then press Enter after each command:
2. ren %systemroot%\System32\Catroot2 Catroot2.old
3. ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4. Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1. Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2. If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its icon.
-or-
3. You can manually type each command at the command prompt:
regsvr32 c:\windows\system32\vbscript.dll /s
regsvr32 c:\windows\system32\mshtml.dll /s
regsvr32 c:\windows\system32\msjava.dll /s
regsvr32 c:\windows\system32\jscript.dll /s
regsvr32 c:\windows\system32\msxml.dll /s
regsvr32 c:\windows\system32\actxprxy.dll /s
regsvr32 c:\windows\system32\shdocvw.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups2.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 Softpub.dll /s
regsvr32 Mssip32.dll /s
regsvr32 Initpki.dll /s
regsvr32 softpub.dll /s
regsvr32 wintrust.dll /s
regsvr32 initpki.dll /s
regsvr32 dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 slbcsp.dll /s
regsvr32 cryptdlg.dll /s
regsvr32 Urlmon.dll /s
regsvr32 Shdocvw.dll /s
regsvr32 Msjava.dll /s
regsvr32 Actxprxy.dll /s
regsvr32 Oleaut32.dll /s
regsvr32 Mshtml.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 Browseui.dll /s
regsvr32 shell32.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 jscript.dll /s
regsvr32 atl.dll /s
regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2. If you receive a notification from User Account Control simply click Continue.
3. At the command prompt, type the following, commands and then
press ENTER after each command.
net start wuauserv
net start bits
net start cryptsvc
exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
Windows 8.1 - Windows Store - Error Code: 0x80073cf9
Hi All,
After a quick Google search, it appears that I am not the only person who seems to be having issues with the Windows Store. Whenever I try to download certain games or apps, I receive the following error message:
"Something happened and your purchase can't be completed. Error code: 0x80073cf9"
I have tried all of "quick fixes" such as recreating the "AUInstallAgent" and "AppReadiness" folders in C:/Windows, along with running the SFC/ scannow through Command Prompts, but neither of these fixed the issue. If anyone
could please help me, I would greatly appreciate it.
**NOTE: This error only appears when certain applications are downloaded specifically "Asphalt 8: Airborne".I get the impression there's been an issue with the app store marketplace all day. Seen reports from friends via Twitter complaining about it, saying it's been down for over 10 hours.
Maybe you are looking for
-
Sending email with Opera fails?
I'm trying out Opera 9.5 Beta 2 and am experiencing problems when trying to send mail. As far as I can tell I have set up Opera the exact same way as Claws which is working perfectly fine. However, when trying to send a mail with Opera I get this err
-
Having Trouble Moving Library, Support Article Hasn't Helped
My problem is that I can't move my iTunes library from my Dell desktop PC to my MacBook, using my 30 GB iPod Video as a hard drive. Now, I know there is an article for this (http://docs.info.apple.com/article.html?artnum=300173), but I followed all t
-
hi iam calling a form using a push button ,when i click on the button i get a error such as no such form exits, but there is a form in that name, even i tried out creating the same form with different name and calling it but i get the same error , do
-
Trace function won't work but why?
Okay, I used to use Flash MX+ and AS1 & AS2 alot and am now ramping up to AS 3.0. This sounds simple and dumb, but I cannot for the life of me get the trace() function to work. If I put this into a new .fla: function hello(){ trace('Hi'); hello(); I
-
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong