Windows cannot verify the digital signature for the drivers required for this device. A recent hardw

windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)

Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Windows cannot verify the digital signature for the drivers required for this device. Code 52

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have reinstalled, uninstalled, the whole 9 yards.

See the driver topic of:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

The digital signature for this package is incorrect- error itunes install

I won an ipod shuffle at MacWorld Wednesday. I need to update my itunes to 7.02, but keep getting this error after install is attempted:
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
G5 Mac OS X (10.4.8)

Ok..... got no help, but through lots of trial and error found the following. If I download the file my work on a flash dirve it installs fine. Best I can see is it must be some issue with my Netgear router.
Try downloading on another system. File comes in as .dmg and then opens to a .mpkg when all is fine. Mine would never open the enclosing folder.
Best of Luck!
G5 Mac OS X (10.4.8)

The digital signature for this package is incorrect.

im trying to do a software update and i get The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”. how do i fix it?

Are you using Software Update, or direct download?
Which exact one is it?

"Windows cannot verify the digital signature for the drivers required for this device."

When I connect my iPod to my laptop, it only connects for about 10 seconds before disappearing. If I look at the iPod's properties in the Device Manager, it says:
Windows cannotverify the digital signature for the drivers required for this device. A recenthardware or software change might have installed a file that is signedincorrectly or damaged, or that might be malicious software from an unknownsource. (Code 52)

I would uninstall and reinstall the Apple software. See the following. The following also has a link for Win7/Vista
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Digital Signatures for Mobile Devices

We currently use smart cards that have our digital signatures and would like to have this transferred or be able to use on a mobile device. Our forms currently require digital signatures, however, the person can't view the form (created in Livecycle designer ES2) from the mobile phone, therefore we need to upgrade to ES4. Will we be able to use our current signatures using mobile, without having to use a signature created from Adobe?

LiveCycle ES4 has Mobile Forms module which actually capable of rendering your existing XFA based forms as HTML5 based form which could be opened on Mobile devices as well.
Mobile Form has Scribble signature for Mobile devices, the digital signature is not supported on Mobile devices.Check this : http://helpx.adobe.com/livecycle/topics/mobile-forms-dev.html
Thanks,
Wasil

USB "Windows cannot verify the digital signature" and No Audio in Notebook

Model: HP Pavilion DV6
OS: Windows 7 (64-bit)
I recently started to face this issue with the USB drivers and no audio from the internal speakers of my notebook.
ON checking the USB drivers, it says that Windows cant verify digital signature.
I uninstalled, restarted the notebook but the newly installed drivers have the same issue. Even tried to update the drivers, but to no avail.
I am even facing issue with no audio from internal speakers.
Uninstalled and reinstalled ATI High Def Audio Device and IDT High Def Audio CODEC - the drivers look good, but when I test sound in Control Panel - it fails to play test sound.
I have installed all Windows updates and the new HP Support Assistant and all other updates.
NOTHING works!
Please help!

I've got a temporary fix , but it sounds like you need a full recovery . After the HP/Compaq Screen flashes and disappears at startup , start pressing F8 like a boss (4 or 5 times) , you'll see a screen pop up with many options on it , near the bottom is one that says "disable driver signature requirement" or something similar . Arrow down and select that one , don't think it works after reboot , but like I said , it's just a temporary fix .
hope that helped
If it did hit me with some Kudos , I need all the help i can get .

Installing ADE - cannot verify Adobe digital signature

On up-to-date 64-bit Windows 7 Home, I am unable to verify the software publisher when installing ADE 1.7.2, and so will not install the software. Both digitaleditions.exe (available via the ADE home page "Launch" button) and the "manual" install file setup.exe give warnings like so:
Do others experience the same message when trying to install ADE 1.7.2 on a clean system? Is there a certificate update I'm missing? Is the software really not recognizably signed?

Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am getting error :digital signature for this package is incorrect--

I have completed a clean install and have installed OS 9.2 as well as OS 10.3
and OS 10.4.2 from install DVDs apparently successfully. Now when I attempt to install the software updates for my computer, I get error that the digital signature of this package is incorrect and may have been corrupted since signed by apple. I have previously had all software up to date using software update/s etc. So how do I fix this digital signature Problem??
Harold

Hi, Harold and baltwo —
(1) Harold, I agree with baltwo's advice to try using "stand-alone" downloads as a short-term "work-around." But I realize this may be unsatisfying — if the error becomes chronic.
(2) baltwo's advice to search Apple's KnowledgeBase is normally a very useful resource — but in this instance, only provides links to a few articles about the topic as it relates to OS 9, Mail.app, and OS X Server. If you'd like to read background info about the current usage of digital signatures, you'll find info that's a bit more relevant from:
• Help »» Mac Help »» "What is a digital identity" and "certificate"
• an ADC search (using, e.g., [ exact phrase: "digital signature" and all the words:
"OS X" ] as terms)
• a Google•Mac search.
However, in terms of resolving your situation, I'm inclined to think that most of the search results will be academic. If you search through these discussions to see others' Software Update problems and solutions, you'll find this error message is relatively common — and seems to represent a number of conditions (based on the differing solutions).
(3) I haven't noticed a cogent solution that spans these problems. But the troubleshooting process outlined in KnowledgeBase Articles 106695: Troubleshooting Automatic Software Update in Mac OS X and 106692: Troubleshooting installation and software updates may be helpful. As the latter suggests, you may want to try logging-in to a temporary "test" administrator account as a means to determine whether your account's keychain is implicated specifically. (...or another user-specific issue.)
Please post back to discuss your progress.
Good luck!
Dean

Windows Cannot Verofy The Digital Signature For This filr

I cannot go into recovery mode and my system wont boot!!!Its a Hp Pavilion g4 1318-dx

×××Verify××××

Software update: "The digital signature for this pkg is incorrect"?

When I do the software update check, I get a list of updates, but when they go to install, I get
the above message. Apple article #303134 says to download manually and then run it, but that
doesn't work either. Anyone having this problem?

Are you using Software Update, or direct download?
Which exact one is it?

Digital Signature for 10.5.7 is invalid.

I get this message every time i try to get the update.
[quote]The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.

OK Guys. i think I may of figured this out. I have been having this error for monthes upon monthes with every update apple had released.
I did the following things, and it resolved this on 2 machines (one was a newer machine, which i pulled the info over using migration assistant.
1) Uninstalled Cisco VPN Client (using sudo /usr/local/bin/vpn_uninstall )
2) Removed any preference file in /Library/Preferences/ and ~/Library/Preferences/ that had any of the following names (only com.apple files) Security, software update, loginwindow, finder, etc.
3) Removed all the keychain files, located in /Library/Keychain/ and ~/Library/Keychain/
Ran the Keychain fix utility at /Applications/Utilities/Keychain Access
Ran a fix on the keychains (there are none, you deleted them) This will recreate a new keychain for you.
Rebooted.
All Su ran fine. Again, this is only what worked for me, and like I said, I have had this issue for monthes. No solution that was posted online worked, this seemed to.
I would say the pref files being deleted might not make a dofference, I think the real culprit is bad keychain files, and maybe the cisco vpn client.
Can anyone try this, and report back?

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

App-V 5.0 Sequencing Office 2010 - Cannot verify the License for this Application KMS

Hey Guys,
i already found some Topics about my Problem, but None of the Solutions i have found, help in my case. I hope someone can help...
I Sequenced Office 2010 Professional Plus x86 on an App-V 5.0 Sequencer Client (x64) and streamed it to Windows 7 x64 and Windows Server 2012. While i was sequencing, i followed the Articles at
http://blogs.technet.com/b/office_resource_kit/archive/2011/06/15/sequencing-office-2010-for-app-v-part-1-considerations.aspx and also used the Parameter:
msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
In the sequencing Process anything ist working fine, i can start Word, Excel... and Office is activated. When i publish the Application and stream to the Client or RDS, i get the Error message in the Screenshot.
I also tried to create a new Package and type in the KMS Client Key directly to Office, didnt work. In a third Sequencing Process (also new Sequence) i tried with an another Script what i have found: msiexec /i OffVirt.msi PROPLUS=1 KMSSERVICENAME=”SERVERNAME”
KMSSERVICEPORT=1688
Please help!!
Best regards

I am having this same exact issue; however, I have done everything in the App-V 5.0 Sequencing document, and I have enabled Set-AppVClientConfiguration -EnablePackageScripts 1.
The sequencer is on a Win 7 32-bit machine, so I used the following:
msiexec
/i OffVirt.msi ADDLOCAL=OSpp,OSpp_Core PROPLUS=1
KMS is registered in DNS, so I shouldn't have to specify KMS.
As soon as I start Office on a machine, setup screen comes up briefly, and then I see the:
"Microsoft Office cannot verify the license for this application. A repair attempt failed or was canceled by the user. The application will now shut down."
I would use the package accelerator; however, it's a new Pro Plus 2010 build, and it says 12 files are missing from the install (files like the actual OffVirt.msi and manifest files).
This is getting a little frustrating, as I've already tried the package 4 different times. I also tried this version:
msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
I am also using the latest SP2 client, Sequencer, and then the AppV 5.0 SP1 server is using the latest hotfix 4 which was released in April 2014.

Windows cannot verify the digital signature for the drivers required for this device. A recent hardw

Similar Messages

Maybe you are looking for