Windows Cannot Verofy The Digital Signature For This filr

I cannot go into recovery mode and my system wont boot!!!Its a Hp Pavilion g4 1318-dx

×××Verify××××

Similar Messages

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Windows cannot verify the digital signature for the drivers required for this device. Code 52

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have reinstalled, uninstalled, the whole 9 yards.

See the driver topic of:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Windows cannot verify the digital signature for the drivers required for this device. A recent hardw

windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)

Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"Windows cannot verify the digital signature for the drivers required for this device."

When I connect my iPod to my laptop, it only connects for about 10 seconds before disappearing. If I look at the iPod's properties in the Device Manager, it says:
Windows cannotverify the digital signature for the drivers required for this device. A recenthardware or software change might have installed a file that is signedincorrectly or damaged, or that might be malicious software from an unknownsource. (Code 52)

I would uninstall and reinstall the Apple software. See the following. The following also has a link for Win7/Vista
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The digital signature for this package is incorrect- error itunes install

I won an ipod shuffle at MacWorld Wednesday. I need to update my itunes to 7.02, but keep getting this error after install is attempted:
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
G5 Mac OS X (10.4.8)

Ok..... got no help, but through lots of trial and error found the following. If I download the file my work on a flash dirve it installs fine. Best I can see is it must be some issue with my Netgear router.
Try downloading on another system. File comes in as .dmg and then opens to a .mpkg when all is fine. Mine would never open the enclosing folder.
Best of Luck!
G5 Mac OS X (10.4.8)

The digital signature for this package is incorrect.

im trying to do a software update and i get The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”. how do i fix it?

Are you using Software Update, or direct download?
Which exact one is it?

USB "Windows cannot verify the digital signature" and No Audio in Notebook

Model: HP Pavilion DV6
OS: Windows 7 (64-bit)
I recently started to face this issue with the USB drivers and no audio from the internal speakers of my notebook.
ON checking the USB drivers, it says that Windows cant verify digital signature.
I uninstalled, restarted the notebook but the newly installed drivers have the same issue. Even tried to update the drivers, but to no avail.
I am even facing issue with no audio from internal speakers.
Uninstalled and reinstalled ATI High Def Audio Device and IDT High Def Audio CODEC - the drivers look good, but when I test sound in Control Panel - it fails to play test sound.
I have installed all Windows updates and the new HP Support Assistant and all other updates.
NOTHING works!
Please help!

I've got a temporary fix , but it sounds like you need a full recovery . After the HP/Compaq Screen flashes and disappears at startup , start pressing F8 like a boss (4 or 5 times) , you'll see a screen pop up with many options on it , near the bottom is one that says "disable driver signature requirement" or something similar . Arrow down and select that one , don't think it works after reboot , but like I said , it's just a temporary fix .
hope that helped
If it did hit me with some Kudos , I need all the help i can get .

TS1538 windows cannot initialize the device driver for this hardware. (Code 37)

i'm just about to lose my mind. I've been dealing with this problem for several months now. I've only been able to sync to itunes 2 or 3 times since sept. 2012. My pc isn't recognizing my ipod touch. It thinks it is a camera. HELP!!!

Have you tried:
iOS: Device not recognized in iTunes for Windows
I would try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Windows cannot initialize the device driver for this hardware. (Code 37) for Ipod Nano

I have a Ipod Nano for 5 years and Saturday I was updating the latest Itunes and when I connect my Ipod to my PC I got a Code 37 error. I uninstalled the new itunes and put back the old itunes but my Ipod is still having the same error. I did the same thing to unistall the ipod and itunes reboot the PC and installed itunes 10.7 back in and then my Ipod and still have the error. Then last night I tried out my Ipod Shuffle and connect it to my PC and it was installed successfully. Do I have to get a new Ipod if my nano isn't working (but it still plays)?

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

Windows cannot initialize the device driver for this hardware. (Code

i cant use my X-TremeMusic Card because device manager tells me . i have uninstalled and reinstalled all drivers and software.
im running
AMDx2 +48000
Windows XP Pro x64
2 gigs of ram
need some help please
corey

i am having the same problems, did you sort it in the end and how did you do it's

Software update: "The digital signature for this pkg is incorrect"?

When I do the software update check, I get a list of updates, but when they go to install, I get
the above message. Apple article #303134 says to download manually and then run it, but that
doesn't work either. Anyone having this problem?

Are you using Software Update, or direct download?
Which exact one is it?

The error occurs by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.

The following errors occur by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.
"Error 1330. A file that is required cannot be installed because the cabinet file C:\<tool>\Data1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt. Error 8230 was returned by WinVerifyTrust."
Please teach the following of Error 8230.
1) Occurrence condition.
2)Approach to avoiding.

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Cannot start the source application for this object - Embedded PDF in Excel 2007

I am having a real issue which unfortunately is intermittant and I cannot pinpoint what is causing the problem. Basically I am inserting a PDF object into an Excel worksheet and immediately after I insert it, it will open fine. If you click off into another cell and save the sheet, then try to reopen the embedded PDF, you get the error "cannot start the source application for this object".
Any help would be very much appreciated! Has anyone else run into this?

I got that problem with one of my client after updating from Adobe Reader 8.2 to 9.3.1. Excel version was 2002 and not 2007 but this is Adobe problem.
Check that registry key for you Acrobat Document key points to right AcroRead32.exe path at HKEY_CLASSES_ROOT\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32
of whatever key points to your Acrobat Document.
I used Sysinternals Procmon to monitor registry activity and found a line and opened that registry location and found out Adobe Reader 8.0 path there.
9:55:56,9021789 EXCEL.EXE 3236 RegOpenKey HKCR\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32 SUCCESS Desired Access: Maximum Allowed
I have seen that Adobe Reader 9.3 doesn't update that registry and leaves Adobe Reader 8.0 values there. Same problem may be in other upgrade scenarios too.
In addition to that my Windows 7 with Office 2007 that has never had anything but Adobe Reader 9.x versions didn't had anything on that registry location and it gave me same "cannot start the source application for this object" error. Putting that path "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" to LocalSever Default value fixed that too. Maybe Adobe should do something with this issue?

Windows Cannot Verofy The Digital Signature For This filr

Similar Messages

Maybe you are looking for