Windows command for Patch installation

Hi!
We are having some difficulty understanding the Windows command for installing a patch.
We read the readme, but cannot quite follow. Can someone please provide this command?
Version: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
Thanks!

PavanG wrote:
You can use the below command to apply the patch.
opatch apply
You will need to run this command from the patch folder after setting the Oracle Home and Oracle Sid.There are other options to opatch - such as napply. Better to find out what the OP is having difficulty with before throwing out a one-size-fits-all solution.

Similar Messages

How to use Multiple Homes on Windows Box for patching

Reading an Article by Arup Nanda 04.23.2007 talks about using multiple oracle homes for patching. We've installed oracle again and now have 2 Oracle Homes (db_1 and db_2). If I look at my service startup for the database I see this:
c:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE TestDB.
If I try and start my database out of the db_2 install I'l receive errors about the init file not being located in the db_2 location. Should I copy all my files from db_1 over to db_2?
thanks.

I'l receive errors about the init file not being located in the db_2 locationYes, of course. Otherwise the Oracle Home will never know the location of the init.ora at the old location.

Command for silent installation of SCVMM Agent or adding Hyper-v Host to SCVMM

Hello..
I have to add my Hyper-V host using command to SCVMM without access to SCVMM Console.
Plz provide me commands for that.

Hi Richa,
I tested in my lab to add a domain joined hyper-v host with following command:
Add-SCVMHost -ComputerName serverlab-01 -VMMServer scvmm2012r2-01 -Credential (Get-SCRunAsAccount -Name "domainadmin" )
The Runasaccount "domainadmin" is create via command "new-scrunasaccount" (during this command it will prompt to input the username and password in my case I added a domain admin account ):
$credential = Get-Credential
New-SCRunAsAccount -Credential $credential -Name "domainadmin"
Actually (in most cases), you can use "view script" in the GUI or at the end of the wizard , this may help us to know which command was used :
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Opmnctl command for patch 11.1.1.3.0

Hi,
I am following the instructions "Applying the Latest Oracle Fusion Middleware Patch Set" (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e16793/patch_set_installer.htm) but can not find the "opmnctl" command in my Oracle installation (I have searched all Oracle directories). Also, the environment variables ORACLE_HOME and ORACLE_INSTANCE are not set.
My current installation (a fresh installation on Windows 7):
- Oracle Database 10g Express Edition release 10.2.0.1.0
- Oracle WebLogic Server version 10.3.3
- Oracle Fusion Middleware 11g release 11.1.1.2.0
The patch I am trying to apply is: Oracle Fusion Middleware 11g Release 11.1.1.3.0
Many thanks and kind regards,
Adrian

Hi Adrian,
Oracle Process Manager and Notification (OPMN) is installed and configured with the following installation types:
1. Web Tier Installation: OPMN manages Oracle HTTP Server and Oracle Web Cache
2. Oracle Portal, Forms, Reports, and Discoverer Installation: OPMN manages Oracle Portal, Oracle Forms Services, Oracle Reports, Oracle Business Intelligence Discoverer, and Oracle EM Agent and Service Manager
3. Oracle Identity Management Installation: OPMN manages Oracle Internet Directory and Oracle Virtual Directory
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14007/intro.htm
Regards,
Anuj

Help for Patch installation on EP!!!

Hi,
I have installed Netweaver-04 SR1.
-)I Installed WAS with ABAP Stack.
-)Then Java addin.
-)& EP installation.
I have not yet installed any licence and i want to install SP12 for EP. As per the documents SR1 Includes upto SP9. i want that if anyone give guidence for that how to proceed for SP12 (Steps) that because after this i have to install XI too. I went through the doucments of how to install sp but was bit confusing. Any input in this area is highly appriciated.
Thanks and Regards
Dheeraj Thareja.

Hi,
unfortunately I have not much experience with upgrading the double stack (i.e. ABAP + Java) installations. Therefore I would not be able to add much to what's already in the upgrade guides. Have you seen this guide: https://websmp204.sap-ag.de/~sapidb/011000358700001930932005
This is a common guide on how to apply support packages for different NW04 components. The Enterprise Portal scenario is described on page 21. In the table, there's a list of all packages (i.e. SAR files) that you need to download from service marketplace.
Basically, the order of patching is first apply patches to the Web AS Java, then EP patches...
However, you should have no problems if you follow the procedure outlined in the document mentioned above.
Hope that helps!

How to give jdk location path in windows 7 for odi installation

I downloaded a file ofm_odi_generic_11.1.1.5.0_disk1_1of1 and ofm_rcu_win_11.1.1.5.0_disk1_1of1 .
In ofm_rcu_win_11.1.1.5.0_disk1_1of1 file i found java in bin under jdk.
In my pc Path is D:\OdiHome\rcu\rcuHome\jdk\bin
The above same path i gave but it was not taking any thing and asking same question specify jdk location.
Kindly provide me the details how to make this success .Thanks in advance.

Hi
The path is now managed by Windows 7 and not the autoexec.bat or autoexec.nt files. To change the system environment variables, follow the below steps.
1.From the desktop, right-click My Computer and click Properties.
2.In the System Properties window, click on the Advanced tab.
3.In the Advanced section, click the Environment Variables button.
4.Finally, In Environment Variable window User variables in Techno
Click on Add button and provide below information
Variable Name: JAVA_HOME
Value: D:\Oracle\Middleware\jdk160_24
Again Click on Add button and enter below details
Variable Name: path
Value: %path%;D:\Oracle\Middleware\jdk160_24\bin;D:\Oracle\Middleware\jre160_24\bin
Again Click on Add button and enter below details
Variable Name: ODI_JAVA_HOME (same jdk location should provide in odiparam.bat file in ODI_HOME\oracledi\agent\bin location)
Value: D:\Oracle\Middleware\jdk160_24
Note: Better Don't gove jdk path from D:\OdiHome\rcu\rcuHome\jdk\bin. Please give jdk path from Drive:\Oracle\Middleware\jdk160_24 (*eg: D:\Oracle\Middleware\jdk160_24*) for more details see below URL
URL: http://geekswithblogs.net/renso/archive/2009/10/21/how-to-set-the-windows-path-in-windows-7.aspx
Regards,
Phanikanth
Edited by: Phanikanth on Dec 25, 2011 11:48 PM
Edited by: Phanikanth on Dec 25, 2011 11:49 PM

Execute windows command for a network path

hi,
i am trying to execute the following code:
try{
Process process=Runtime.getRuntime().exec(new String[]{"cmd","/c","dir","C:\\Backup"});
InputStream inputStream = process.getInputStream();
BufferedReader bufferreader = new BufferedReader(new
InputStreamReader(inputStream));
String line = bufferreader.readLine();
while(line!=null)
System.out.println(line);
line=bufferreader.readLine();
It works very fine, but when i replace exec() with exec(new String[]{"cmd","/c","dir","\\hfvs4\\storage"}) or with exec(new String[]{"cmd","/c","dir","//hfvs4//storage"}) i am getting any output, the program just runs and terminates.
help me to execute the "dir" on a network path.

Shouldn't that be "\\\\hfvs4\\storage"?thanks a lot. that's a silly point i missed out.

Every PATCH installation fails after installing Windows Updates

Hello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
Daniel

Hello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
Daniel

Windows 7 X86 Update patch installation failed ("Updateshandler.log - Update execution failed")

Hi,
I am using SCCM 2007 R3 at client site, Since from Jan 2015 and for Feb 2015 also i am facing a problem in Windows 7 32bit OS Patch installation failure on Client PC. I am creating a bundle for Windows 7 OS Patch's and targeting these monthly patches to
windows 7 Collection having X86 and X64 bit OS.
From All the Deployed Patches only X64 bit Win 7 PC's are getting successfully Update.
BUT on all X86(32Bit) win 7 OS there was Installation Failed Error. The UPDATES are getting successfully downloaded in CACHE folder on client PC's but while installation they are getting failed. I have tried reinstalling SCCM Client on PC but problem persists.
Checked number of forum's and done WUA re-installtion as well, Tried downloading new patches for win7 32 bit and deployed again, but no +ve result. WSUS reconfigured and reinstalled and approved all patches again, again no solution.
Updates for all other OS's Like Win 8, 8.1 Server 2003,2008 and 2012 for X86 and C64 all working fine.
Updateshandler.log Giving :---- Update execution failed.
MP DP and all other roles are working fine with SUP role reinsalled.
Tried:-
https://technet.microsoft.com/en-in/library/bb932189.aspx
http://blogs.technet.com/b/sudheesn/archive/2010/11/10/troubleshooting-sccm-part-iii-software-updates.aspx
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c8c8715e-a1f7-4de1-b17f-d3a72c24db6c/updates-not-show-up?forum=configmgrsum
Please anyone help..
Regards
Rajiv.

1. We have tried downloading patch again & again . Try to push them trough SCCM targeting win7 collection having x-86 & x-64 bit OS.
2. Tried manual installation of . Cab files also on 10 win 7 x-86 PC's but all failing with error code.0x800706f7. This code shows The stub received bad data. In both cases (manual & SCCM )
3. Even tried downloading .MSU files for same KB article that also not getting installed
4. Monitored Windowsupdate.log & DISM.log & CBS.log
Handler Fatal: CBS called error with 0x800706f7
warning exit code=0x00000000; call error code=0x80240022
5. Tried renaming windir/Softwaredeployment folder to windir/Softwaredeployment.log & run SFC /Scannow
0x800706F7 -2147023113 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered.
This seems related to a problem within Windows, and ConfigMgr is not at fault - Windows has a severe issue which is affecting the servicing stack.
Try CheckSUR.
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

When will SAP GUI for Windows 7.20 patch level 9 be available?

When will SAP GUI for Windows 7.20 patch level 9 be available?
I can't see the SAP GUI patch version in the PAM (https://websmp102.sap-ag.de/pam).
Thanks.

Hi,
Latest is SAP GUI for Windows 7.20 patch 8
http://service.sap.com/swdc
> Software Downloads
> Installations and Upgrade
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Installation
> gui720_8-10007878.exe SAP GUI for Windows 7.20 patch 8
The NetWeaver 7.x BW/BI Front-End Patch Delivery Schedule can be checked
via note 1085218.
Thanks,
Venkat

What databse I have to install for SOA11g installation on Windows platform

Hi,
I want to install SOA11g on my Windows laptop. I have installed 10g XE (10.2.0.1) database. But when I tried to create the Dehyderation store using RCU tool, the error I got is like, the datasbase version will not support for this installation, however its asking to upgrade it to 10.2.0.4 version. But I didn't find any patch for XE database on windows to upgrade to the required version.
I also tried to install the 11g enterprise database, but I am not able to succede. There I have faced one issue, that using RCU tool I am not able to connect the database as a SYSDBA. So I have dropped this DB and shifted to XE. Now I have stuck with XE version problem.
Is there anybody who installed the SOA11g on the windows platform per personal usage? If so please guide me.
-- Khaleel

Hi,
I have followed the steps in http://sriki77.blogspot.com/2008/11/oracle-xe-processes-parameter.html
Changed as follows:
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 26 21:07:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> show parameter processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 40
SQL> alter system set processes=500 scope=spfile
2 ;
System altered.
SQL> show parameter processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 40
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 167773580 bytes
Database Buffers 427819008 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
SQL> show parameters processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 500
SQL>
After this I got some more errors , I have ignored them aswell. (One I remembered is open_cursors limit was 300 suppose to be 500).
Finally I have created the entire schemas except the PORTAL CONFIGURATION everything is successful.
Thank you.
-- Khaleel

Numéro de commande:AD001782624FR.Impossible installer produit.Mon système est Windows Vista édition familiale.Merci de me rembourser.Mr Serge COLUMEAU

Numéro de commande : AD001782624FR
Impossible installer produit.Mon système est Windows Vista édition familiale.
Merci de me rembourser et d'annuler l'abonnement
Mr Serge COLUMEAU

Hi epicure.06270,
I just took a look at your account, and it looks as though the order is still processing. It can take several hours for a subscription to process fully. If you're still unable to sign in and access your account later on this afternoon, please let us know and we will take a closer look at your account.
Best,
Sara

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

Oracle 8.1.5 for NT installation Windows XP proffessional

Oracle 8.1.5 for NT is installed on windows XP Proffessional. Installation time SID = ORCL815. Oracle TNSListner service and oracle webAssistant service are started. But oracle serviceORCL815 status is showing as starting when startup type is Automatic. If startup type is manual and when I am stating it this gives "error 1053: The service did not respond to the start, or control request in a timely fashion".
Now the documentation says "ORA-01053 user storage address cannot be read
Cause: A bind variable or other user area could not be read by Oracle.
Action: Check that binds are done correctly on valid user buffers, then retry the operation.
So what will be the solution to start the oracle service.

Rick,
I just mailed you the code and instructions for a work-around. However, we strongly advise you to upgrade to 8.1.6 or 8.1.7 !
null

Windows command for Patch installation

Similar Messages

Maybe you are looking for