Windows Cryptographic Service Provider - error code: 2148532334 (Windows 8.1)

Dear,
since my computer was recently updated from Windows 8 to Windows 8.1 I have a problem with placing my signature (via certifcates).
Before the update I could sign all my pdf-files with my electronic identity card - without issues.
Now I receive a window: "windows-security" which says: Smartcarderror (some required programmes are not installed on the system).
When I click "cancel" I get the error code in subject.
Another card reader is not changing anything, neither another smartcard (id-card).
Please advise, as signing pdf-files is very important for our company.
Thanks. Willem Van Lommel
NB: in my opinion all other updates are done without troubles.
NB2: please find herewith some prt scns (in Dutch):
1. before a smartcard was pushed in the cardreader:
2. after the smartcard was added (same when card was added to other cardreader)
3. because "ok" didn't result in anything -> you have to click "cancel - annuleren" or on the red X (at the right corner), then the result is:

If by "Adboe X Pro" you mean Acrobat, you are more likely to get a useful reply if you ask in the Acrobat forum.
All I can tell you that this error (0x80100068) means "The smart card has been reset, so any shared state information is invalid."

Similar Messages

  • "Windows Cryptographic service provider error no. 3221225506" signing in to digital signatures

    Dear Friends,
                       Please help me find solution for this problem which has totally jeopardized my work. I am using Adobe reader X. Everytime I open MCA forms for signing, I have to use some DSC which are stored in my Explorer. But when applying, it shows this error. I am not able to find any solution for this. Pleaaaaase help..

    Hi proindia,
    Please see this point on Acrobatusers.com: http://answers.acrobatusers.com/Why-I-Windows-Cryptographic-Service-Provider-error-Signatu res-sudden-q13152.aspx
    It links to an older Acrobat knowledgebase document, but I think it will fix your error.
    Best,
    Sara

  • Windows Cryptographic Service Provider error: 2148073489

    Every time I try to sign a PDF with my CAC enabled cards, this error for "Object not found" shows up. I am able to use my CAC cards to log into sites and my computer, as well as to sign PDFs on other computers, but on my computer I cannot digitally sign. Please help!

    Which environment: platform (I presume Win), which OS/version, which product (Acrobat/Reader) and version (including minor)?

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

    Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
    Error encountered while signing:
    The Windows Cryptographic Service Provider reported an error:
    Access was denied because of a security violation.
    Error Code: 2148532330

    I assume you are implying "biztax" application here, right?
    I have contacted their program lead, with no result at all.
    Past days I have been searching for a solution - reinstalls / new systems - no solution.
    This issue appeared a week or two ago only.
    I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
    http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
    If anyone finds a solution to this issue, please do let me know - any help is appreciated.
    Biztax tells to use the "signature", not the "authentication"  - but it is only Auth. that is showing up as option to sign (that works)
    ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
    Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
    >  I noticed that when I try to open the pdf  document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader".    every piece of info helps I guess.
    Obviously last version of Reader   11.0.03

  • The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497

    I am using Windows 7, 64 bit,  Adobe 8.1 Professional, ActivClient Agent, with CAC card
    Trying to sign a document digitally however  I keep getting :  The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497
    -I have  tried by deleting my certificates off the computer and reinstalling, this did not help.
    -I have tried rebooting the computer, this did not help.
    -I google the error message and can't locate any step by step instructions to fix this problem.
    Could use some assistance. Please do not assume I'm top of line knowledgeable in Adobe when giving me a fix. That is the reason I am looking for step by step instructions. Thanks.
    Navy Chief

    Hi Chief Mendenhall,
    It's really a Microsoft error, not a Acrobat error, but I know that doesn't make the inability to sign any less frustrating.  This probably has something to do with the communication bridge between Acrobat, Windows, and the CAC software. I know you're not responsible for software upgrades, but is there any chance you can download the free Adobe Reader (Adobe Reader Install for all versions). Even though Reader doesn't have the same editing capability as Acrobat Pro, it will allow you to sign a PDF file, and what I'm looking to see is if this is somehow related to the age of version 8.1, which is well past its end-of life. Even version 9 in longer supported.
    Thanks,
    Steve

  • The Windows Cryptographic Service Provider reported an error Error code 3221225594

    Hi
    When I want to digital sign an inteligent pdf I received this error: The Windows Cryptographic Service Provider reported an error Error code 3221225594 and I couldn't sign. I use adobe 10.1.1 and my operating system is windows server 2008. Please help me to solve the problem...thank you

    Exactly what error do you get?
    Remember this is a CM07 Report and NOT a CM07 query.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Error: The Windows Cryptographic Service Provider reported an error Error code 3221225594

    Hi
    When I want to digital sign an inteligent pdf I received this error: The Windows Cryptographic Service Provider reported an error Error code 3221225594 and I couldn't sign. I use adobe 10.1.1 and my operating system is windows server 2008. Please help me to solve the problem...thank you

    check the patchdownloader.log file - it can be a permission issue on the folder where you store the updates.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Re: Windows Vista and 7 / Error Code in Windows 7 Home Premium

    Just purchased my first laptop and am attempting to connect to the internet via a DSL GNET Modem using PPPoE. When I attempt to connect to the internet I get Error Code 651: The modem (or other connecting device) has reported an error. Any ideas on a fix for this. Odd to get a new system and an error code so soon.
    System Overview:
    Toshiba Satellite Notebook
    AMD Phenom (tm) II N870 Triple Core Processor
    2.30 GHZ
    64 Bit OS
    Sent via IPAD

    Im 100% sure this error is not caused by your new notebook. Im also 100% sure that all ports on your notebook work properly. You can check this in device manager. Is some problem there?
    This modem is not known to me but, generally speaking, using LAN cable there should not be any problem if your modem is configured properly. With WLAN is the same.
    Have you tested functionality on some other LAN or WLAN network (different DSL router)?
    By the way: which notebook model do you have exactly?

  • Windows Cryptographic Service Provider

    Howdy all,
    I get the error below when trying to sign multiple Adobe documents with a DoD CAC. Any ideas as to what the problem is? Basically, if I have more than one document to sign, I have to remove the CAC and re-authenticate. Please let me know, thanks.

    If by "Adboe X Pro" you mean Acrobat, you are more likely to get a useful reply if you ask in the Acrobat forum.
    All I can tell you that this error (0x80100068) means "The smart card has been reset, so any shared state information is invalid."

  • Windows Server Service Provider Registry fails to start - error 1067 The process terminated unexpectedly

    Hello experts,
       I have a SBS 2011 Essentials installation that suddenly has an empty dashboard.
    Event viewer:
    APPLICATION LOG - Event ID: 1000 Source: Application Error
    General Description:
    Faulting application name: ProviderRegistryService.exe, version: 6.1.1840.0, time stamp: 0x4d6dafda
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0x80131623
    Fault offset: 0x000007fe958b0717
    Faulting process id: 0xff8
    Faulting application start time: 0x01cf340bce30552f
    Faulting application path: C:\Program Files\Windows Server\Bin\ProviderRegistryService.exe
    Faulting module path: unknown
    Report Id: 0befeb0f-9fff-11e3-852b-d4ae52c1faae
    APPLICATION LOG - Event ID: 1025 Source: .Net Runtime
    General Description:
    Application: ProviderRegistryService.exe
    Framework Version: v4.0.30319
    Description: The application requested process termination through System.Environment.FailFast(string message).
    Message: Unhandled exception in OnStart: System.ArgumentOutOfRangeException: Not a valid Win32 FileTime.
    Parameter name: fileTime at System.DateTime.FromFileTimeUtc(Int64 fileTime)
    SYSTEM LOG -Event ID: 7031 Source: Service Control Manager General Description:
    The Windows Server Service Provider Registry service terminated unexpectedly.  It has done this xx0 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    When I try to start this service I get 'error 1067 - The process terminated unexpectedly'. I have checked all dependencies of this particular service and they are all running properly. I've restarted these dependencies, disabled Kaspersky
    protection, restarted the Server a few times to no avail.
    Any ideas? Thank you!

    I had this exact same problem! Thank you so much Robert for posting a link to that script! That is truly an amazing Powershell script.
    I had all the same errors that AK772 mentioned, but I chose to zoom in on a different issue that the script pointed out. When I ran the "Test CA Infrastructure" step it found several errors. When I looked at what the script was doing there it was
    comparing the server certificate thumbprint in the registry (HKLM:\Software\Microsoft\Windows Server\Identity) with the personal certificates (Personal Certificates in the Certificate snap-in using MMC). When I looked through them individually, sure enough
    the thumbprint in the registry didn't exist in my certificate store. I have NO idea how this could have happened!
    However, from there, I changed my Google search criteria and found the following excellent article:
    http://titlerequired.com/2013/04/29/windows-server-2012-essentials-an-error-prevented-the-dashboard-from-opening/
    This told more about that error and showed how to regenerate the certificate identity in the registry. This totally saved me! Once I ran through the steps that he outlines, even though I got a timeout error towards the end, I could see that the certificate
    thumbprint had changed in the registry and now existed in my personal certificate store.
    Once I saw this, I tried going into services and manually starting the stopped "Windows Server Service Provider Registry" service. Sure enough it started right up, no error this time. Finally, I restarted the server so that all of the other dependent
    services would come back up and re-ran the linked script above and everything was perfect.
    Thanks so much for the breadcrumbs in this post and all of your contributions. I hope that this post will equally be able to help someone else through this very troublesome and evasive error!

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • Can't start reports server on Windows Server 2003 SP1 Error code 13

    Hi,
    This morning I figured how to start the rwserver using the command, rwserver server = repsrv. This works using XP pro physical machine but now I am trying to perform the same task on a Windows 2003 virtual machine.
    I have used the line:
    rwserver -install repsrv.
    To add repserv to the list of available services in computer management. This has appeared as an avaiable service and so I click to start it, unfortunately every time I do I get the error message:
    "Windows could not start the OracleOraAppServer10g_home1Reports [repsrv] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 133."
    I am assuming this is a security issue with Windows 2003 but I can't find a cure anywhere.
    Thanks in advance for any help that anybody is able to provide
    Cheers
    Daniel

    Hello,
    Step 1) Check that you can start the reports server from a "DOS Window" :
    rwserver server=repserver
    Step 2) Check the PATH set for rwserver.exe when it is running as a service
    Some sysinternals utilities like Process Explorer / filemon may help :
    http://www.sysinternals.com/
    Regards

  • After installing the most recent iTunes update/version iTunes will no longer run on my PC.  I receive a window with the Microsoft error code R6034

    After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7).  I receive multiple error windows with the Microsoft error code R6034.  Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest".  I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted.  The site instructs the viewer to contact the application developer.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • How to register the an SAP system in SAP Marketplace?

    Hi Experts, I have installed a new sap system. How do I register that in SAP Marketplace? I followed the OSS note 94998. But couldn't get through. I went ot the following path for registering my system: Data Administration >> System Data >> Create Ne

  • Does WLS 5.1 support private key passwords like WLS 6 does ?

    WebLogic 6.0 supports private key passwords as described here http://e-docs.bea.com/wls/docs60/adminguide/cnfgsec.html#1053139, summarized here; "When using PKCS-8 encrypted private keys, you need to enable the Use Encrytped Keys field on the SSL tab

  • Computer asking for password to make changes to root directory, system and Library.

    My computer is asking for my password to make any changes to the root directory, system and Library folders, and and sub folders within those. I dont recall it doing this in the past. I am logged in as the Administrator.

  • Performance DB vs Java Edition

    Hi there, we've been investigating wether a (and when which) NoSQL-DB outperforms a standard SQL solution for our usecase: 500.000 records bulk insert 2k - 5k per record With 2 Indices Using Java API Multi OS: Linux, Windows, z/OS Berkeley DB perform

  • ERROR CODE  -3259

    i was updating my ipod to ios 6.1 as recommend, and an error accurred, and my ipod enter in a restore mode, while conecting it to itunes the download starts nomally but the error -3259 appears and reestart the process