Windows doesn't recognize iPad

When I plug my usb cable into my computer it doesn't recongnize my iPad. It says it's an unknown device... Anyone know how to fix it?

Here's the info from Apple : http://support.apple.com/kb/TS1538

Similar Messages

ITunes (for Windows) doesn't recognize iPad 2

I have Windows 8 with iTunes 11.3.0 but it doesn't recognize my iPad 2 (with iOS 7.1.2). But it does recognize my iPhone 5s with the same iOS 7.1.2.
I have tried with three different cables, the last one was a new one, but it never recognized my iPad.
Can someone help me?
Thanks.

Did you try to connect in recovery mode?
If you can't update or restore your iOS device
Here are some more tips:
iOS: Device not recognized in iTunes for Windows

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

Hello Fercho1998,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device connectivity issues:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Windows doesn´t recognize iphone

Hello i have this problem whit my iphone 3Gs 32GB when i plug it on my Lap Top windows doesn´t recognize im pluggin it so i can´t sync my iphone whit iTunes and worst i tried to restore my iphone now i got that screen when you need to restore iphone whit iTunes obviously i can´t restore it cause windows doesn´t recognize my iphone pls help me

Your question has been asked and answered ad nauseum already. Forum etiquette would have you search the forum before posting.
Please search.

Trying to charge my shuffle and windows doesn't Recognize it.

I was trying to charge my son's shuffle and windows doesn't Recognize it both of them. I even tryed to charg them in the pluge in. But that does not work eather.

I fixed the problem. When I was trying to clean the connector of the iPhone I must have bent some pins. I have straightened them to the best of my ability and now it syncs. If your iPhone charges, but doesn't sync, most likely you have a similar problem, because the iPhone doesn't need all of its pins to charge, but it does need all of them to sync.

Updated to 1.2.2 - Now Windows Doesn't Recognize

Hiya, I've had this 5G 80gb iPod for about a year and this is the first major problem I've encountered.
After updating to 1.2.2 (something I now regret) Windows refuses to recognize my iPod, I've followed all the guidelines and I've even tried to connect it to my laptop to no avail. The Device Manager seems to show a problem with the USB port, but I can use other hardware without any problem, and the iPod won't work on any of my six ports (there's a weird 'negative' sound each time I connect it). I can listen to my music alright, but I can't take or put anything in my iPod if Windows doesn't recognize it.
Could it be a version problem? And in that case, is there a way of reverting the firmware?
Thanks in advance.

Hi CamBej,
Have a look at this article about windows not recognising iPod,
http://docs.info.apple.com/article.html?artnum=305136
If you want to revert back to version 1.2.1 on your iPod you will have to restore it, version 1.2.2 has been removed as it was causing a lot of problems.
fern K
Message was edited by: fern K

HP laptop (Windows) doesn't recognize printer

I have an Airport Express. Cable modem is plugged into it. HP PhotoSmart 3210 is plugged into USB. RCA jack is running from AE to receiver. My iMac can access the internet (wireless airport connection), and I can print to the HP. However, I can't see the printer on the network. I have an HP laptop running windows xp. It recognizes the network, and I can connect to the internet. It doesn't recognize the printer either. Any suggestions?
imac 2.16 ghz intel Mac OS X (10.4.8)

Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html

MacOS iTunes 11.0.5 doesn't recognize iPad or iPhone.

I just returned from a two week vacation, and plugged my iPad and iPhone into my iMac to sync them and discovered that iTunes doesn't recognize them either on my wifi network, or via USB.
iTunes (11.0.5) does recognize my iPod nano, and iPhoto does recognize my iPhone and iPad. They are just totally AWOL in iTunes. I've tried rebooting all of the devices including my computer, and all of the other relavent steps in the troubleshooting guide. Nothing helped.
I successfully synced both devices to my iMac before leaving for vacation, but I can't remember if I did that before updating iTunes or not.
I even erased my iPad and then tried connecting it to my iMac, and still no luck.
Also, my device back ups are no longer showing up in the "devices" tab in iTunes preferences.
My MacBook Air, running iTunes 11.0.4 recognizes both devices. Both my laptop and my desktop are running OS 10.8.4
Has anyone else experienced similar issues? Any solutions?
Cheers.

I thought I'd reply to my own post in case this can help others. I solved my issue by downloading and re-installing iTunes. I didn't even need to un-install it via Terminal first. I ran the installer, and my iPhone and iPad connected immediately.

Printer doesn't recognize ipad

Air printer 6520 doesn't recognize my ipad

Sandy08
Welcome to the HP Community Forum.
If this is still bugging you, please take a look at the following:
Add Device to Printer
You may just need to jump down the Mobile Section...
See Section titled > Mobile Device / iPad gets an App
There is also an FAQ for AirPrint bits under the section titled "For Apple Products"
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Itunes doesn't recognize ipad nor iphone 4 after upgrade to 10.1.1.4

Hi,
i upgraded itunes to version 10.1.1.4 in order to do the updates of OS on my ipad and iphone4. But now itunes doesn't recognize both devices any more, which wasn't a problem before the upgrade. It's not an USB problem, since the notebook recognizes both devices, but takes it for a camera and is searching for a proper software, but in itunes both do not show up. Did anyone have the same problem? Any idea what to do?
Thanks
Marc

You know what, I discovered the solution today, while syncing my iTouch. All I did was , remove my mobile me account from my iphone. Turn it off, then on. Add my mobileme account back to my iphone. Then connect it back to iTunes..... it was fixed! Woohoo!!
I decided to share the news and found that BSC had a solution! Its pretty much same thing I did, but THANKS so much for responding!! It worked!

My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

IPod Firewire 10 GB Mac-formatted. Windows doesn't recognize it

Hello, folks,
I'm iPod newbie, got older 10 Gb Firewire touch wheel iPod recently and trying to connect it to PC.
PC has Belkin Firewire card.
I've charged ipod, then reset it, installed iTunes, Xplay and MacDrive software on my PC.
When i connect ipod to PC it shows disk platter icon with a magnifying glass, and progress bar under that icon is showing progress. After about 10 minutes this icon appears (disk platter with a checkmark): http://www0.info.apple.com/images/kbase/60943/60943_3.jpg
When i try to connect ipod to PC it doesn't recognize it (and none of the programs - iTunes, MacDrive and Xplay - neither).

Despite the name "Classic" this forum is for the latest versions of the iPod line. You want to repost your question in this area...
http://discussions.apple.com/category.jspa?categoryID=151
Patrick

Windows Doesn't Recognize my 8900

When I first connected my BB 8900 to my Vista PC, it "found new hardware" and said it was ready to use, but Windows Explorer never recognized it as a device. I tried another USB port, same thing. I then tried to use an XP PC, which opened an explorer window after installing the 8900. Success! I then tried to load music with the Media Manager program--and the PC froze up solid after loading several songs. When I restarted, the PC no longer would recognize my BB. Both PCs make the familiar bee-doop sound when I connect the BB, but it doesn't show up as a device, either in Explorer or the Control Panel. Upshot? I can't use my BB for any form of storage--no music, no video, no pictures, nothing. (I have a 4GB Toshiba card, with the mass storage feature turned on.)
Is there some way to get my PCs to recognize my BB?
Thanks,
Robert Marshall

I brought it into the store and they were able to restore itfor me.

Windows doesn't recognize ipod touch 4g even when in recovery mode, what can i do. itunes doesn't detect it either.

when i try to conect my ipod touch 4g to my laptop, it doesn't recgonize it itunes doesn't either. at first i would get a pop up from my laptop saying something about the driver buit now nothing happens, but when i try to connet an ipad or ipod nano 3g everything works fine, i have the latest version of itunes and i have firmware 4.3.5 on my ipod. please help.

What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Windows doesn't recognize iPod Touch 8gb 3g

I'm running Windows 7 Ultimate x64, and after I upgraded my iPod Touch to iOS4, it got stuck in DFU mode and is stuck in a continuous DFU mode loop. My computer won't recognize the device and I've done everything to try to reinstall the mobile device driver, I've reinstalled iTunes, rebooted the iPod, and I just don't know what to do anymore. Somebody please help me.

Miiownzu wrote:
I found a solution! I uninstalled everything from Apple on my computer. Everything. Bonjour, Apple Software Update, iTunes, everything Apple related that was on my PC. I then went to my Appdata folders and deleted all of the Apple and Apple Computer folders I could find. Then I rebooted and reinstalled iTunes and now it works fine! I hope this helps some more people as well!
I did exactly that, as I was told to do that by an Apple advisor, only it just brought me back to square one. Same probelm as before the uninstall, ipod in recovery mode, and itunes not recognizing it.
After that, they have shipped me a prepaid box for repair/replacement. I recommend everone else with same problem to do the same. Hopefull the new one I get will have OS4 installed and work fine. ****, I'll take 3.1.2 at this point, just want the **** thing to work.

Windows doesn't recognize iPad

Similar Messages

Maybe you are looking for