Windows Easy Transfer does not connect Windows 8 with Windows 7
A Windows 7 PC and a Windows 8 PC are on a network and working flawlessly. They can access each other either by shared folders or Homegroup. I am trying to transfer files and settings from the Windows 7 PC to the Windows 8 PC using Windows Easy Transfer.
Everything proceeds smoothly until the connection step when process gets stuck. I do not know how to go about to address issue.
Any tip will be greatly appreciated.
Hong
Hi,
Which method do you use to transfer items to Windows 8, via network or via USB drive?
If you stuck at this step, you can try the other methods for a test.
How To Transfer Files, Settings & User Profiles From Windows 7 To Windows 8
http://www.addictivetips.com/windows-tips/transfer-files-settings-from-windows-7-to-windows-8/
Alex Zhao
TechNet Community Support
Similar Messages
-
Can I get an older release of Firefox? 36.0 does not play well with Windows 7.
Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/ -
Bluetooth speaker does not connect automatically in windows 8.1
before the upgrade (?) to 8.1,if i turned on my bluetooth speaker,it automatically took over from the speakers of my laptop.No drivers,no further changes needed.
After upgrading to 8.1 i have to disconnect the speaker,connect it again,then set the speaker as my standard speaker.then it plays.every time again and again.
how do i fix this?Me too. It shows that it connects and briefly reads "Connected" and then quickly switches to "Not Connected". My Windows Phone 8, when trying to connect to Windows 8.1 PC via Bluetooth is doing the same thing and I
receive this both from the PC and the phone. My phone does successfully connect to my Bluetooth speaker, but not from the PC only from the phone. Has this been fixed yet and I missed it? One thing
I've learned while being a part of a smaller market share having had a Windows Phone for several years now, the solutions come quietly and sometimes go unnoticed. Only later will I find myself thinking, "Oh yeah it works now, they've created a solution".
Case in point: Red Laser stopped working then shortly thereafter there was the Eye icon available at the Bing screen that can scan just about anything that can be scanned. Is there a similar thing happening with my Bluetooth device drivers from my 8.1
PC and I need to manually push something? When there is a solution, will you please alert me and the rest of this thread? Thanks much in advance! -
SmartView 11.1.1.3.01 does not work right with Windows 7 64 bit
We have a user running Windows 7 64 bit and Smartview 11.1.1.3.01 that is having a host of issues
1. After initial install SV works as expected
2. If He either shuts his computer down or closes excel and reopens smartview he is not able to save data, nor when doing adhoc query analysis is he able to manually enter dimensions into the cells and click refresh. For example, He will open the connection and ad-hoc query analysis. Drag over the year dimension, enter FY12 in the cell, click refresh and FY12 disappears, he can manually choose it out of the tree and it will stay.
All Windows XP users do not experience this issue
any help would be greatly appreciated
thanx
mikeWhich version of MS Office are they using?
Did you confirm the plugin was installed using the run as administrator windows command - as there have been issues when not using this caused problems too.
Can you try using the later version plugin: 11.1.1.3.500. Be careful though that you don't hit the following:
Issue: After upgrading from Smart View v11.1.1.3 to Smart View v11.1.1.3.500, the connection screen box is blank in Excel 2007 on Windows 64-bit systems.
Cause: The registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView was not updated during the upgrade and contained incorrect information.
Solution
In the registry editor, delete the registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView and run the Smart View v11.1.1.3.500 install.
Note: By deleting this key, you will lose stored information for: Connections, Login, Options, Preferences. These will need to be recreated.
Cheers, Iain -
Skype does NOT start up with Windows
When I boot up Windows, Skype refuses to load with it even though it is enabled to do so in the Skype settings.
Windows 7
Skype 6.21.0.104
Solutions tried: removing and reinstalling Skype and checking/unchecking the Start Skype with Windows checkbox.Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application. -
Can you help me here please.I've installed itunes ,my computer's OS is windows 7, but I cannot connect to itunes stores and an error 0x80090318 pops up. Dont know what to do! i did unistalling many times and reinstalling again but the same thing happens.
try this:
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
HT1925: Removing and Reinstalling iTunes for Windows XP
http://support.apple.com/kb/HT1925
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
good luck -
When I open a new window, the spinner does not stop, or the window open
I have a MBP 3 yrs. old, running Snow Lep. When I open a new window, the spinner in the address bar spins and window does not open unless I click on the X and stop the spinner. Some times this doesn't work either. It just hangs up trying to open the next window.
The given are very little details about your problem so please elaborate.
2. on each page load you have to verify whether the session variable. if "IsLoggedIn" exists and its value is "true" then you can show the requested page otherwise redirect to login page.
if(Session["IsLoggedIn"] == null || Session["IsLoggedIn"] != "true")
Response.Redirect("login.aspx");
Better way: use a master page. In the load_page event, check the session. Thus, you wouldn't need to write the method to check in every page, just in the master page.
Noam B.
Do not Forget to Vote as Answer/Helpful, please. It encourages us to help you...
Masterpage is a better idea.
But The login page shouldn't use MasterPage OR need to have logic to check before redirecting to login page if you are already in Login page.
Otherwise you will get into Recursive Redirection error.
hope this helps. -
Windows media player does not open in new window
When I go to a web site that may have several wmv files to view, if I view one, a new tab does not open for wmv. When I am through watching the clip, I close windows media, but it does not return me to the original web site, I just have a white screen and I have to go back and reload the page again to view another clip.
Hi Paul,
I face the same problem, any findings so far?
Thanks!
Best regards,
Sandra -
Hi Folks!!! Please if you can help me: after the upgrade to the last iTunes 11.2.0115 Version (Windows 7 Professional PC Operational System), I've received, all the times I've tried load it, the warning message: "iTunes has stopped to work"...What is happening? Please, can anyone help me? I can't access iTunes to the syncronizing of my iPod Classic 160Gb 7th generation. All the way, thank's a lot. Mª Paula.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-JohnI think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed". -
Windows Easy Transfer can't transfer files from Windows Vista or Windows XP
I'm running a English Windows Vista Ultimate and just bought a
ENGLISH Windows 8.1. I've downloaded the WET for Windows vista and tried to complete the second portion of the transfer by specifying the saved .MIG file WET created. Then I got the error message: "Windows Easy Transfer can't transfer
files from Windows Vista or Windows XP".
The truth is, Microsoft was too busy integrating special effects to it's operating system and claimed it as fully polished instead of making sure built-in tools were worth using.
Another harsh reality is that THERE IS NO WAY TO TRANSFER a file from Windows Vista to Windows 8. That's because engineers didn't even bother to make that possibility happen. Just Google: "Transfer from windows vista to windows 8" and you'll see
there are no relevant Microsoft web page about this.
Worse, Microsoft is giving excuses. To solve this issues, they came with a toolbox of fake scenarios in order to confuse clients even further, while they know damn well the Windows Easy Transfer is NOT EASY and certainly in multiple cases
DOES NOT TRANSFER jack to begin with.I somewhat agree with you.
Trying to transfer from 7 to 8.1 and although it looks like the "7" side of the equation is working, the "8" side isn't.
"7" is trying to connect to "8" but "8.1" is being just plain stupid.
Not even sure why the MIG file step is even necessary if all I want to do is transfer one file between two machines. Said file is really BIG, or i'd just use my network, and the "8.1" rig doesn't have a dvd reader...
Per the MIG step... my file again, is big... I'd need to "mig" this file just to send it? Can't even get to the step where I'd mig-it and if i did, how long would that take?
So this is what progress is all about... geez... gimmie a NULL MODEM CABLE !!! -
"Windows Easy Transfer can't transfer your files and settings." Why?
I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
Windows Easy Transfer can't transfer your files and settings.
The message pops up only a few seconds after the transfer begins.
Why is this?! I need those files and windows has screwed me. Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings. Same system language as before. BTW I'm on a Toshiba L505 laptop
running Windows 7 Home Premium.
I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a
few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important
those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use. This new user account has the same unique name of the user account I am trying to restore but that's where
the similarity ends. All the settings for this account are default settings and empty folders. What does this mean?Hi Vincent, like I said I tried all of that already and it failed. Thanks a lot for trying to help though. Imperfect1, so sorry I took so long to reply. No that's not the case. I was trying to restore from x86 to x86.
Well, I finally gave up. I've scoured the internet for a solution. You'll probably find duplicates of this post all over. This has been a known software problem with Windows Easy Transfer for years and Microsoft has done nothing to fix it or warn users of
the risks. Shameful!
Anyway, I managed to recover my files with this life saver of a program here>
http://www.visser.com.au/blog/migrecover-for-microsofts-windows-easy-transfer/
MigRecover Utility for Microsoft's Windows Easy Transfer.
I can't express how grateful I am to the developer and the host for the download. You guys are the most awesomest people ever. Cheers.
Here's how you modify the syntax in commmand prompt if you used a password to protect the mig file in WET>
http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/68910c1a-3c4b-47af-bb22-0e7ec6f2054f/
Just remember to change the source drive letter in "C:\SaveData.MIG" to the actual drive it's stored on if your MIG file is on an external drive like mine was; whether it's E:, F:, G: or whatever.
Good luck to anyone with the same issue who stumbles upon this post. I hope it helps you as it did me.
AsdyAsks -
iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?
http://support.apple.com/kb/ts1538
-
My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.
My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.
Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.
Maybe you are looking for
-
The email address-appleid that is coming up and asking me the password for in my app store when i am trying to update my apps is not the same email-appleid i am signed in under when i go to my settings and view my itunes and app store. Its a differen
-
AirPort Extreme splits or multiplies internet source?
Lets assume that my AirPort Extreme (n) was connected to a 2mbps effective DSL modem, and 4 devices were wired/wirelessly connected to my AirPort. Would each device receive 512kbps of internet (i.e. the AirPort splits the internet source of 2 mbps fo
-
Moving cursor on multi-record block with pjc components
Hi, this thread question is updated to a more specific and correct one in the new thread: Need help on using navigation function in when-custom-item-event trigger Please, follow there... I have a pjc on a multi-record block. When I activate the pjc t
-
Messaging tracking logs filename format changed in Exchange Server 2013 sp1
Hi, I have noticed that the file name format is changed for exchange server 2013 sp1. Now it will have hh attached to it like MSGTRKMSyyyymmddhh-n.log; MSGTRKMDyyyymmddhh-n.log: MSGTRKyyyymmddhh-n.log. So the "hh" will goes from 00 to 23 for single d
-
Hi, on 10 g R2, on Windows SEVER 2003 oracle user SCOTT connect from SQLPLUS and runs a large query. Is there any way to see how much CPU does he use ? Thanks.