Windows Fails to Load After Upgrade to Mavericks
Related topic:
https://discussions.apple.com/activity?streamSource=connections
I'm a little late to this party, but hoping to find some help. I can see my WindowsXP Pro partition on the desktop, but after upgrading to Mavericks it won't fully start up. I'll get the usual screens, then the XP loading screen with the blue loading animation. After about 5 passes of the blue thing, it will hesitate and flash a blue screen so fast, that it took me several attempts to snap a photo so I could read it. "Unmountable_Boot_Volume" is the error. It then says to follow these steps... but cuts off and reboots.
One thing of note is that Parallels 10 uses the same XP virtual machine and boots just fine, so I figure XP can't be all that messed up. Maybe a driver issue, not sure. Does Mavericks not support XP? I'm open to Windows 7, but I'd like to backup some stuff first if possible. Maybe I can do that through Parallels?
Below are some details about my setup:
Als-Home-Mac:~ user$ diskutil list
THIS IS AN EXTRA FAT32 DRIVE
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *82.0 GB disk0
1: DOS_FAT_32 NEWMAN 82.0 GB disk0s1
THIS IS THE MAVERICKS DRIVE WITH XP PRO PARTITION
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Big Al Pro 833.6 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data 165.7 GB disk1s4
Als-Home-Mac:~ user$ diskutil cs list
No CoreStorage logical volume groups found
Als-Home-Mac:~ user$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=81964302336; sectorsize=512; blocks=160086528
gpt show: /dev/disk0: MBR at sector 0
start size index contents
0 1 MBR
1 62
63 160086465 1 MBR part 11
Als-Home-Mac:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 9964/255/63 [160086528 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 0B 0 1 1 - 1023 254 63 [ 63 - 160086465] Win95 FAT-32
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Mac Pro 3,1
Quad-Core Intel Xeon
2.8 GHz
Upgraded from 10.6.8, but I tried unsuccessfully to upgrade to Lion first. That went all screwy but was able to go all the way to Mavericks instead. Proobably where things got messed up. I don't remember exactly how I fixed it. I didn't think I could go that current with this hardware.
Als-Home-Mac:~ user$ sudo dd if=/dev/rdisk1s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 26 61 |........?....H&a|
00000020 00 00 00 00 80 00 80 00 ff 1f 4a 13 00 00 00 00 |..........J.....|
00000030 00 00 0c 00 00 00 00 00 ff a1 34 01 00 00 00 00 |..........4.....|
00000040 f6 00 00 00 01 00 00 00 cf 33 84 9c 53 84 9c d2 |.........3..S...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200
Similar Messages
-
Please help - CSAuth Fails to load after upgrading from V3.3 to V4.0.1
We have recently upgraded ACS V3.3 to V4.0.1 on Windows server 2003 SP1. However, now the windows service CSAuth fails to start. There's nothing in the CSAuth log file either.
If we do clean installs, installing V3.3 from new and then do a upgrade to V4.0.1 on a clean system it works fine.
The problem seems to be when we install fresh 3.3, then replicate our existing dbase to it, then upgrade to 4.0.
Does anyone have any ideas - any thoughts would be most welcomed,
Thanks, in advance,
MalcolmHi
When you say nothing in the csauth log... do you mean nothing at all... or nothing that looks like an error?
Try setting logging to max and seeing where it gets to.
I suspect there is something in your 3.3 config that doesnt get upgraded corectly. Its impossible for every scenario to be tested - Im not sure how much upgrade testing actually gets done. Probably left until the end of the test cycle.
Darran -
I found some feeds where people had deleted the genius library .itdb and were able to fix the problem. It did not fix mine. Still unable to access iTunes!
The option key... I've been holding down the command key... No wonder that didn't work. I should really be writing this stuff down!.
Regardless, Downloading and reinstalling iTunes did the trick.
Thank you mende1 & saffron63 for the assist! -
I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test. -
Stuck in login window after upgrading to Mavericks
I am unable to login with my (admin) account after upgrading to Mavericks yesterday.
This was very unfortunate considering that I didn't backup my data !!
On reboot (I do not remember whether it was the first or second time) I couldn't login anymore as I usually did.
I tried different procedures (entering secure mode, repair permissions, reinstall 2 times Mavericks) but cannot solve the stuck.
Then I thought it could be a nice idea to create a new admin user and followed this instructions (http://www.hackmac.org/tutorials/how-to-create-a-new-administrator-account/).
After that I was able to login with the new user, I backed-up my data but I was still in stuck on login window with the old user.
I tried to delete
com.apple.loginwindow.plist
com.apple.recentitems.plist
from /Users/XXX//Library/Preferences/ and tried to restart but nothing.
Now I wonder how my old and important user can start working again.
Thank you very much.
GiulianoRestart and hold down the Command and R keys during startup.
On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches/
Reset password.
Restart -
When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?
Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button. -
Load averages over 1.00 after upgrading to Mavericks
Hi,
I have recently upgraded to OS X Mavericks on my old Macbook Pro (Late-2007, 4GB RAM) and I noticed that the load averages are always above 1.00, even when CPU is almost 100% idle. I know load averages don't reflect only CPU but after a reboot I see the same. Could this be because it's an old Macbook and it takes more resources from it to run the new OS X 10.9? This is so strange.
Thanks for reading!
L.I'm having the same "issue" since I first upgraded to Mavericks from Lion. At first I thought it had something to do with the way processes are scheduled/handled in Mavericks but now I realize that I DO get load averages below 1.0 (~0.7-0.8, never below this), but only when completely idle.
I have an early 2011 Macbook 2.7 GHz i7with 16 GB RAM, so I find this kinda weird.
Are you using any particular applications/extensions?
(see also http://apple.stackexchange.com/questions/106828/avg-load-goes-up-after-upgrading -to-mavericks, altough there is no solution here). -
Late 2007 15" MBP Very slow after upgrading to Mavericks
Hi guys,
this is my first post here. I look forward to learn and help others.
The reason of this post is, as outlined in the title, slow paerformance of my computer after upgrading to Mavericks. It was kinda slow from before but this time it's almost unbearable to use it. I used to be able to run VMWare with 2 XP and 1 windows server machines WITH JUST 2 GB OF RAM! Now I have 4 GB and can barely run a single virtual machine with XP and the cooling fans come on just by watching a video on youtube, which also makes performance take a dump.
These are the specs extracted from EtreCheck:
Hardware Information:
MacBook Pro (15-inch 2.4/2.2GHz)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
DynDNSUpdater - Path: /Library/StartupItems/DynDNSUpdater
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 2:7:17
Disk Information:
WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 149.92 GB (76.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.74 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1.1)
com.eltima.SyncMate.kext (0.2.5b15)
com.vmware.kext.vmci (90.4.18)
com.vmware.kext.vsockets (90.4.23)
com.vmware.kext.vmnet (0104.03.86)
com.vmware.kext.vmx86 (0104.03.86)
com.vmware.kext.vmioplug.10.1.24 (10.1.24)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.synium.cleanappdaemon.plist
[failed] rapiback.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] net.culater.SIMBL.Agent.plist
[loaded] org.gpgtools.macgpg2.gpg-agent.plist
[invalid] org.gpgtools.macgpg2.gpg-agent.plist.plist
[failed] syncmateStarter.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
Boom
Flux
iTunesHelper
Dropbox
Cinch
3rd Party Preference Panes:
Application Enhancer
Box Sync
Flash Player
Flip4Mac WMV
FUSE for OS X (OSXFUSE)
GPGPreferences
Perian
Internet Plug-ins:
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
MeetingJoinPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
Unity Web Player.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
22% vmware-vmx
6% Google Chrome
4% WindowServer
3% coreaudiod
2% Boom
1% EtreCheck
0% BBLaunchAgent
0% mds_stores
0% CleanApp Daemon
0% mds
Top Processes by Memory:
586 MB vmware-vmx
135 MB Finder
98 MB Google Chrome
90 MB softwareupdated
74 MB Dropbox
66 MB VMware Fusion
59 MB mds_stores
58 MB Google Chrome Helper
53 MB WindowServer
45 MB systemstats
Virtual Memory Statistics:
40 MB Free RAM
1.18 GB Active RAM
1.13 GB Inactive RAM
1.07 GB Wired RAM
24.09 GB Page-ins
645 MB Page-outs
I understand it says my RAM is way too low, but hve no idea what's killing it. So far I've disabled and uninstalled all DynDNS items. I just read about Chrome's slow performance for MBP's and plan to switch back to Safari (Firefox made my computer even slower).
Thanks in advance for any light shed on this.
Oscar.Thank you Kappy, while I was reviewing the log from EtreCheck I noticed the 3rd party preference panes, launchers and daemos. I deleted a few of them and it really helped with system performance. Reading your reply confirms that what I did was the right thing; here is an updated log from EtreCheck:
Hardware Information:
MacBook Pro (15-inch 2.4/2.2GHz)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:22:52
Disk Information:
WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 149.92 GB (77.67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.09 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1.1)
com.eltima.SyncMate.kext (0.2.5b15)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.synium.cleanappdaemon.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
Boom
Flux
iTunesHelper
Dropbox
Cinch
3rd Party Preference Panes:
Box Sync
Flash Player
Flip4Mac WMV
FUSE for OS X (OSXFUSE)
Perian
Internet Plug-ins:
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
MeetingJoinPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
Unity Web Player.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
5% WindowServer
4% coreaudiod
3% com.apple.qtkitserver
2% com.apple.WebKit.WebContent
1% EtreCheck
1% Boom
0% SystemUIServer
0% BBLaunchAgent
0% CleanApp Daemon
0% Safari
Top Processes by Memory:
180 MB com.apple.WebKit.WebContent
152 MB com.apple.IconServicesAgent
119 MB Safari
90 MB mds_stores
82 MB com.apple.quicklook.satellite
78 MB com.apple.iTunesLibraryService
66 MB Dropbox
57 MB Finder
49 MB Preview
41 MB CleanApp Daemon
Virtual Memory Statistics:
846 MB Free RAM
2.02 GB Active RAM
620 MB Inactive RAM
561 MB Wired RAM
1.22 GB Page-ins
0 B Page-outs
I was reading about GeekBench in the discusions and decided to give it a go, although I was able to only perform the 32-bit tests, I got 1268 on the single-core score and 2187 for the multi-core score; I don't know how good or bad those numbers are. Wish I had a before and after reading but I read about it too late, when I had already erased several items.
I will appreciate any further input BEFORE I decide to reinstall the OS from scratch.
Oscar. -
System becoming un-responsive after upgrade to Maverick
After upgrading to Maverick I am experiencing massive performace problems to the point of the system not being usable.
System: 2010 iMac
Upgraded Yesterday morning, Upgrade process went smooth, no issues at first. First symptoms of problems were hick-ups in video playback, jerks in window switching. From then on over several hours the system became slower and slower to the point of being unusable. Performed system reboot, which took 45min, followed by fast degradation and unusability.
Attempted revovery actions with help from Apple support (thanks, even though the problem remains so far):
Booted system via the network into recovery mode, performed disk check: SMART status OK, verified and repaired disk no issues deteced, verified partition, no issues detected, data volume looks correct.
Attempted normal boot-up, unsucceful
Performed powerdown, followed by opt+cntr+R+P boot, no success
Performed safe boot (shift), system came back up after 1.5 hours, extremely unresponsive, but at least it is up. I am scared to try to shut it down.
Diagnosis attempts: Other than time-outs, no unusual errors in console, file hirachy and files look Ok from terminal, access very slow. Can't see any obviously problematic processes in Activity Monitor, RAM usage about 2.5GBytes out of 12GBytes total, largest is kernel with 700MB, CPU not loaded, no high disk or network io. Evything looks to me like a pefectly normal system that runs at 1/100th or so speed.
Maverick managed to perform a time machine back-up over night and all earlier back-up are gone. So no chance to restore back to Mountain Lion that way.
Anybody with similar problems, any ideas for next steps?
ThanksHere is the output, while booted into safe:
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 2:47:0
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 750.37 GB (191.86 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) <not mounted>: 245.63 GB
HL-DT-STDVDRW GA32N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.ucupdate.plist
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.google.keystone.daemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.adobe.CS5ServiceManager.plist
[not loaded] com.google.keystone.agent.plist
[not loaded] SBA_ListenerAgent.plist
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.valvesoftware.steamclean.plist
User Login Items:
None
Internet Plug-ins:
AdobePDFViewer.plugin
ContentUploaderPlugin.plugin
Default Browser.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
Mathematica.plugin
net.juniper.DSSafariExtensions.plugin
NP_2020Player_IKEA.plugin
NPDjVu.plugin
PrintDialogExt.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
Macintosh HD: Disk size: 750.37 GB Disk used: 558.51 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 6
Oldest backup: 2013-10-31 14:53:35 +0000
Last backup: 2013-11-01 14:14:20 +0000
Size of backup disk: Adequate
Backup size 2 TB > (Disk used 558.51 GB X 3)
Top Processes by CPU:
3% Dock
2% com.apple.IconServicesAgent
1% System Preferences
1% WindowServer
0% EtreCheck
0% coreservicesd
0% lsregister
0% Finder
0% mds
0% SystemUIServer
Top Processes by Memory:
0 B imagent
0 B autofsd
0 B networkd_privileged
0 B com.apple.imdpersistence.IMDPersistenceAgent
0 B com.apple.dock.extra
0 B usernoted
0 B logind
0 B airportd
0 B notifyd
0 B blued
Virtual Memory Statistics:
8.72 GB Free RAM
1.84 GB Active RAM
780 MB Inactive RAM
689 MB Wired RAM
198 MB Page-ins
0 B Page-outs -
Random restarts after upgrading to mavericks and then yosemite
I have a mid 2009 15in mbp. I noticed after upgrading to mavericks that I began to have random restarts and significant hang ups to the point of me having to restart it on my own. I would run disk utility and repair permissions. The mac would run okay for maybe a day or maybe an hour, then restart or hang up. I seem to have a pretty full hard drive and I for some reason thought it may be a failing hard drive. I purchased a new hard drive and restored a time machine backup to the new 1tb drive. I also added 2, 4gb sticks of ram. Things were going swimmingly for a week or so with yosemite installed and then the problems began again. It got to the point that the computer wouldn't even start. I threw my old hard drive back in, reformatted it, and reinstalled a back up. The mac is working now, but with the same kind of random kernel panics. I have done all of the latest software updates as well. I would like to put the other drive back in for shear volume alone, but don't seem to get anywhere when I try. Thank you for your time and consideration. Any help is appreciated. Here is an etrecheck as well.
Problem description:
random shutdowns. have no idea what is causing it?
EtreCheck version: 2.0.11 (98)
Report generated November 28, 2014 at 2:21:31 PM CST
Hardware Information: ℹ️
MacBook Pro (15-inch, 2.53GHz, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5:29:56
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 228.35 GB (91.34 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 20.71 GB (2.52 GB free)
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/AirParrot.app
[not loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.7) Support
/Library/Application Support/LogMeIn/drivers
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.6) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.16) Support
[not loaded] com.sierrawireless.driver.SierraSwitch (1.2.4) Support
[not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) Support
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.logmein.LMILaunchAgentFixer.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[not loaded] com.sierrawireless.SWoCTool.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[running] com.amazon.music.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[invalid?] com.ecamm.printopia.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.helperTool.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.zeobit.MacKeeper.Helper Support
[invalid?] org.virtualbox.vboxwebsrv.plist Support
[invalid?] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Caffeine UNKNOWN (missing value)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
GameFacePlugin: Version: GameFacePlugin 1.8.0.1 - SDK 10.5 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
Unity Web Player: Version: UnityPlayer version 4.2.1f4 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 10.1.8 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.8 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
User Internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071701000001 Support
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
Perian Support
VLC Streamer Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Destinations:
Ryans Backups [Network]
Total size: 3.00 TB
Total number of backups: 24
Oldest backup: 2014-10-28 18:21:13 +0000
Last backup: 2014-11-21 03:56:55 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
18% WindowServer
4% launchd
1% Finder
1% Safari
1% hidd
Top Processes by Memory: ℹ️
189 MB Folder Actions Dispatcher
120 MB Finder
112 MB com.apple.WebKit.WebContent
86 MB mds_stores
86 MB Safari
Virtual Memory Information: ℹ️
4.06 GB Free RAM
2.38 GB Active RAM
1.04 GB Inactive RAM
842 MB Wired RAM
1.84 GB Page-ins
0 B Page-outsHere ya go. How in the **** do I get rid of the cleanmymac stuff, and logmein for that matter. Not sure how I ended up with them but it would be nice to rid my mac of them. Thanks in advance.
Start time: 18:44:49 11/28/14
Model Identifier: MacBookPro5,4
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 4:00
Battery
Condition: Service Battery
SATA
Hitachi HTS545025B9SA02
Diagnostic reports
2014-11-27 mds_stores crash
2014-11-28 Console hang
Log
Nov 28 14:02:02 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:03:13 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:15:28 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:16:32 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:17:36 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:43:05 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:45:30 jnl: b(1, 2): replay_journal: from: 5317632 to: 15631872 (joffset 0x6a8000)
Nov 28 14:45:30 jnl: b(1, 2): journal replay done.
Nov 28 14:45:49 com.apple.locationd: Service exited with abnormal code: 1
Nov 28 14:46:49 com.apple.spindump: Service exited with abnormal code: 75
Nov 28 14:47:22 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:47:22 ws.agile.1PasswordAgent: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:47:22 com.ecamm.printopia: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:49:38 com.macpaw.CleanMyMac.volumeWatcher: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:50:25 process WindowServer[168] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45058
Nov 28 17:53:08 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 17:54:35 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 17:55:45 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:14:09 com.macpaw.CleanMyMac.helperTool: Service setup event to handle failure and will not launch until it fires.
Nov 28 18:17:47 com.apple.xpc.launchd.domain.pid.quicklookd.568: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Nov 28 18:31:23 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:37:49 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:39:01 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:40:12 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:40:46 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
kexts
com.squirrels.driver.AirParrotSpeakers (1.7)
Daemons
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.sierrawireless.SierraReset.plist
com.adobe.SwitchBoard
com.logmein.raupdate
com.adobe.fpsaud
org.macosforge.xquartz.privileged_startx
com.sierrawireless.SierraSWoCMon
Agents
ws.agile.1PasswordAgent
com.logmein.LMILaunchAgentFixer
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.volumeWatcher
org.macosforge.xquartz.startx
com.fiplab.MemoryCleanHelper
com.macpaw.CleanMyMac.helperTool
com.divx.agent.postinstall
com.apple.FolderActions.folders
com.ecamm.printopia
com.amazon.music
com.apple.Safari
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.apple.FolderActions.enabled
Startup items
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/3.1.1/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/3.1.1/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/3.1.1/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/AirParrotDriver.kext
- com.squirrels.driver.AirParrotSpeakers
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/NovatelWireless3G.kext
- com.novatelwireless.driver.3G
/System/Library/Extensions/NovatelWirelessFilter.kext
- com.novatelwireless.driver.DisableAutoInstall
/System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/SierraDevSupport.kext
- com.sierrawireless.driver.SierraDevSupport
/System/Library/Extensions/SierraFSCSupport.kext
- com.sierrawireless.driver.SierraFSCSupport
/System/Library/Extensions/SierraFSRSupport.kext
- com.sierrawireless.driver.SierraFSRSupport
/System/Library/Extensions/SierraHSRSupport.kext
- com.sierrawireless.driver.SierraHSRSupport
/System/Library/Extensions/SierraSupport.kext
- com.sierrawireless.driver.SierraSupport
/System/Library/Extensions/SierraSwitch.kext
- com.sierrawireless.driver.SierraSwitch
/System/Library/Extensions/SierraSwitchKicker.kext
- com.sierrawireless.driver.SierraSwitchKicker
/System/Library/Extensions/ssuddrv.kext
- com.devguru.driver.SamsungComposite
/Library/Audio/Plug-Ins/Components/A52Codec.component
- com.shepmater.A52Codec
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
- com.divx.DivXBrowserPlugin
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/GameFacePlugin.plugin
- com.ElectronicArts.GameFacePlugin
/Library/Internet Plug-Ins/GarminGpsControl.plugin
- com.garmin.GarminGpsControl
/Library/Internet Plug-Ins/iPhotoPhotocast.plugin
- com.apple.plugin.iPhotoPhotocast
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/LogitechHarmony.plugin
- com.logitech.harmony.LogitechHarmony
/Library/Internet Plug-Ins/NP_2020Player_IKEA.plugin
- com.2020technologies.2020Player-IKEA.NP
/Library/Internet Plug-Ins/OVSHelper.plugin
- com.divx.OVSHelper
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/Unity Web Player.plugin
- com.unity.UnityWebPlayer
/Library/PreferencePanes/DivX.prefPane
- com.divx.divxprefs
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Perian.prefPane
- org.perian.PerianPane
/Library/QuickTime/AC3MovieImport.component
- com.cod3r.ac3movieimport
/Library/QuickTime/Perian.component
- org.perian.Perian
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
/Library/Spotlight/GBSpotlightImporter.mdimporter
- com.apple.garageband.spotlightimporter
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/doubleTwistWebPlugin.bundle
- com.doubleTwist.webPlugin
Library/Internet Plug-Ins/Move_Media_Player.plugin
- com.movenetworks.movemediaplayer.plugin
Library/PreferencePanes/VLC Streamer.prefPane
- com.HobbyistSoftware.VLCStreamPrefs
Library/Widgets/countdown.wdgt
- com.pietjonas.hector.AHectorCountdown
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Library/Widgets/iStat Pro.wdgt
- com.iSlayer.iStatpro4.widget
Library/Widgets/SAC.wdgt
- com.mirtchovski.widget.SAC
Library/Widgets/Screenshot Plus.wdgt
- com.stevenchaitoff.screeenshotplus
Library/Widgets/Shutdown.wdgt
- com.TzeenieWheenie.widget.Shutdown
dylibs
/usr/lib/libgutenprint.2.0.3.dylib
Apps
/Applications/Dropbox.app
Contents of /etc/ssh_config (checksum 1281775184)
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist (checksum 94065829)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Label</key>
<string>com.logmein.LMILaunchAgentFixer</string>
<key>OnDemand</key>
<true/>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
<string>fromlaunchagent</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist (checksum 849719711)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeingui</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist (checksum 3380781611)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIGUIAgent.app/Contents/Mac OS/LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist (checksum 1732774279)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>EnableTransactions</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagentatlogin</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIGUIAgent.app/Contents/Mac OS/LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
...and 5 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.logmeinblanker.plist (checksum 993864190)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinblanker</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIBlanker.app/Contents/MacO S/LMIBlanker</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/LogMeIn/stdout.log</string>
<key>ThrottleInterval</key>
<integer>0</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist (checksum 2712592844)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinserver</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/LogMeIn/stdout.log</string>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist (checksum 641044797)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.logmein.raupdate</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>KeepAlive</key>
<false/>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/update/raupdate</string>
<string> /s</string>
</array>
<key>StandardErrorPath</key>
<string>/Library/Application Support/LogMeIn//log/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Application Support/LogMeIn//log/stdout.log</string>
<key>WorkingDirectory</key>
<string>/Library/Application Support/LogMeIn//bin/</string>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.sierrawireless.SWoCMon.plist (checksum 2402291866)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>daemon</string>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.sierrawireless.SierraSWoCMon</string>
<key>LaunchOnlyOnce</key>
<false/>
<key>OnDemand</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Library/Logs/SierraSWoCMon.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/SierraSWoCMon.log</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/SierraDevSupport.kext/Contents/Resources/Sie rraSWoCMon</string>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.sierrawireless.SWoCTool.plist (checksum 3201758844)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.sierrawireless.SWoCTool</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Sierra/SierraSWoCDaemon</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.sierrawireless.SierraReset.plist (checksum 584977086)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>daemon</string>
<key>Label</key>
<string>com.sierrawireless.SierraReset.plist</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Sierra/SierraReset</string>
</array>
<key>UserName</key>
<string>daemon</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.music.plist (checksum 3668832669)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.music</string>
<key>Program</key>
<string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist (checksum 4289752993)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Music/iTunes</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist (checksum 3739816035)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.divx.agent.postinstall.plist (checksum 3163907459)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.agent.postinstall</string>
<key>LimitToSessionType</key>
<string>Aqua</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/extensions-installer</stri ng>
<string>install</string>
<string>safari</string>
<string>DivXHTML5</string>
<string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/DivXHTML5.safariextz</stri ng>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.ecamm.printopia.plist (checksum 728988905)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.ecamm.printopia</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Users/USER/Library/PreferencePanes/Printopia.prefPane/Contents/MacOS/P rintopia Server.app/Contents/MacOS/Printopia Server</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 170942789)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Font issues: 1
Bad plists
Library/Containers/com.apple.internetaccounts/Data/Library/Application Support/CrashReporter/com.apple.internetaccounts_UUID.plist
User login items
Caffeine
- missing value
Widgets
HP Ink Widget
SAC
Shutdown
iStat Pro
Restricted files: 168
Lockfiles: 178
Elapsed time (s): 2 -
After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
My macbook pro is running really slow after upgrade to Mavericks
my macbook pro is running really slow after upgrading to Mavericks....any ideas?
OS X Mavericks: If your Mac runs slowly
The above link is not very useful, so if it doesn't help read on.
There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
Macbook slower after upgrading to Mavericks
Hello, I'm owner of a Macbook Pro MD322LL/A and I haven't had any issues with Lion (the OS that came with) but after upgrading to Mavericks it changed a lot:
Lower performance.
Transitions in the launchpad are laggy (and also buggy).
Start up time increased.
Anyway, that's why I want to make a clean install of Mavericks. Because I think that all these things happens because of making an upgrade rather than a fresh install (same thing occured with my iPhone and iOS 7, but that's another story )
And my question is:
Is it risky to format the Hard Drive and install the OS again? And do I need to do some things before doing it?(in order to keep the license and else)
Assuming that I need just to format the hardrive and install the OS X, isn't it a "simple" of doing it? (like Cmd+R but making a clean install)
Thanks!This is the report:
Hardware Information:
MacBook Pro (15-inch, Late 2011)
MacBook Pro - model: MacBookPro8,2
1 2.4 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
VirtualBox: Path: /Library/StartupItems/VirtualBox
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:18:12
Disk Information:
APPLE HDD HTS547575B7E880 disk0 : (750,16 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 749,3 GB (652,3 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
org.virtualbox.kext.VBoxDrv (4.2.18)
org.virtualbox.kext.VBoxUSB (4.2.18)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.bombich.ccc.plist
[loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[not loaded] com.bjango.istatmenusagent.plist
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[loaded] com.valvesoftware.steamclean.plist
[not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
iTunesHelper
BetterTouchTool
Dropbox
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
SharePointBrowserPlugin: Version: 14.0.0
FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins::
WebEx64: Version: 1.0 - SDK 10.6
Bad Fonts:
None
Old applications:
Cisco WebEx Meeting Center: Version: 1209.12.2806.0 - SDK 10.5
/Users/Guaranimini/Library/Application Support/WebEx Folder/1324/Meeting Center.app
Keynote: Version: 5.3 - SDK 10.5
/Applications/iWork '09/Keynote.app
LIMBO: Version: 1.0.0 - SDK 10.0
/Applications/LIMBO.app
Numbers: Version: 2.3 - SDK 10.5
/Applications/iWork '09/Numbers.app
Pages: Version: 4.3 - SDK 10.5
/Applications/iWork '09/Pages.app
WJoy: Version: 0.6 - SDK 10.5
/Users/Guaranimini/Downloads/WJoy 0.6/WJoy.app
asannotation2: Version: 1206.25.2804.0 - SDK 10.5
/Users/Guaranimini/Library/Application Support/WebEx Folder/1324/asannotation2.app
atmsupload: Version: 1209.12.2806.0 - SDK 10.5
/Users/Guaranimini/Library/Application Support/WebEx Folder/1324/atmsupload.app
convertpdf: Version: 1.2 - SDK 10.5
/Users/Guaranimini/Library/Application Support/WebEx Folder/1324/convertpdf.app
ice: Version: 1.0 - SDK 10.5
/Users/Guaranimini/Downloads/WJoy 0.6/ice.app
Time Machine:
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 90.34 GB
Destinations:
SAMSUNG [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 90.34 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% Safari
2% WindowServer
1% hidd
1% EtreCheck
0% BetterTouchTool
Top Processes by Memory:
238 MB Safari
131 MB com.apple.IconServicesAgent
78 MB com.apple.WebKit.WebContent
70 MB Dropbox
66 MB mds_stores
Virtual Memory Statistics:
958 MB Free RAM
1.51 GB Active RAM
601 MB Inactive RAM
978 MB Wired RAM
817 MB Page-ins
0 B Page-outs
As you can see, there's a couple of things that are "bad" so instead of correcting every single problem (that would take me much longer) I just want to do a clean install and thats it.
arthur wrote:
I suppose you could do that with Internet Recovery as well. You should not have an issue in terms of losing your OS license, as long as you use the same Apple ID that you have been using with your Mac.
I didn't understand the license thing, but if I erase the disk and perform a clean install from a bootable USB that license won't lost am I right?
I made a bootable USB of Mavericks just using this simple command:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/SINTITULO --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
What do I need to do now? go to disk utility select erase, and then install using the USB?
--- TO: hands4 ---
When do I need to do that? after erasing the hard drive with disk utility?
--- TO: Grant Lenahan ---
Yes, I don't really care about the things that my mac has, all the "important" things were backed up -
Macbook 2012 Mid: Can't mount USB mass storage after upgrading to Mavericks
Hi guys,
I'm having big problems with USB mass storages. After upgrading to Mavericks my Mac doesn't see some USB storage devices (mostly USB sticks and Android phone's memory cards via USB. My external USB 3.0 hard disks work fine) at all even though the devices themselves (for example my Android phone) are clearly recognized according to the System Report. When I plug them in, they don't show up on my Finder or on Disk Utility.
I've searched everywhere and it seems like some other people are having the same problem, none seems to offer a definite solution. I've even formatted my HD and reinstalled Mavericks from the recovery partition. Now it mounts a USB stick that was in one of the USB ports at the time of installation but still doesn't read anything else! The funny thing is when I boot into Windows 8 on my Boot Camp partition, I can mount any USB devices including the USB stick and the Android phone I'm having problems on Mavericks without any problems. I can even see then when I boot into the recovery so there's clearly something wrong with Mavericks.
Any chance someone has figured out a solution for this? Apple should've address this long time ago.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? Note: If the devices are not in Mac OS X format, they normally won't mount in safe mode, but they should appear in Disk Utility.
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Windows failed to reboot after installing PC Suite
Hi everyone,
I hope you can help me with my problem. I have an old pc suite version installed in my old laptop(about 6 years old - OS Windows Vista Home Basic) but today i decided to upgrade to the latest one(i think it's version 7). I was able to successfully install it. when i launched the application, it worked fine but when i connected my phone(Nokia X2) via USB cable that was when i started to have troubles. When i inserted the usb cable that came with the phone to my laptop, a prompt appeared that my machine was installing the drivers for my device. After about 5 minutes, the installation was complete and it prompted me to reboot my computer and so i did. Before it powered off, the machine said it was completing the updates first, then done. When it came back on, Windows failed to load and reboot my computer. The complete error msg was: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc & restart your computer.
2. Choose language settings, and then click 'Next.'
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: ntoskrnl.exe
Status: 0xc0000098
Info: Windows failed to load because a required file is missing, or corrupt."
I already followed the instructions since i have the disc with me but my laptop is still not working. I already did Startup Repair and System Restore but it didn't solve the problem. Please help me. Thank you so much!mu5ik3r0 wrote:
Hi everyone,
I hope you can help me with my problem. I have an old pc suite version installed in my old laptop(about 6 years old - OS Windows Vista Home Basic) but today i decided to upgrade to the latest one(i think it's version 7). I was able to successfully install it. when i launched the application, it worked fine but when i connected my phone(Nokia X2) via USB cable that was when i started to have troubles. When i inserted the usb cable that came with the phone to my laptop, a prompt appeared that my machine was installing the drivers for my device. After about 5 minutes, the installation was complete and it prompted me to reboot my computer and so i did. Before it powered off, the machine said it was completing the updates first, then done. When it came back on, Windows failed to load and reboot my computer. The complete error msg was: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc & restart your computer.
2. Choose language settings, and then click 'Next.'
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: ntoskrnl.exe
Status: 0xc0000098
Info: Windows failed to load because a required file is missing, or corrupt."
I already followed the instructions since i have the disc with me but my laptop is still not working. I already did Startup Repair and System Restore but it didn't solve the problem. Please help me. Thank you so much!
Ntoskrnl.exe is a driver in Windows\ System 32. Replace with Windows\ Driver Cache\ i386\ ntoskrnl.exe in safe mode. If that doesn't work, you've to reinstall W7 as suggested earlier and make a backup with Macrium Reflect. It's not sure that your problem is related to PC Suite. Your PC or laptop might be to old for W7. Reinstall PC or OVI Suite as administrator in XP mode.
http://www.macrium.com/reflectfree.asp
http://europe.nokia.com/support/download-software/nokia-ovi-suite
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009
Maybe you are looking for
-
Downloaded game from Apple site - Photoshop crashes
My son downloaded the game "Halo" from the Apple website last week and now Photoshop CS2 crashes while I am working in it. I have a 6 month old Imac G5 with Tiger (not the Intel version). Is Halo taking up memory? Would it be ram or hard disk space?
-
i have a ipad mini , ios version 8.3 .... i am not able to download any app currently on my ipad.... i am not able to figure out the problem , it shows the app is loading in app store , but its never getting downloaded....how do i fix this problem ??
-
10g query running faster with RBO than CBO
I am running a query in Oracle 10g that is taking 1minute 15 seconds to run using the CBO. All the tables and indexes in the query are fully analyzed. However if i add a /*+ Rule */ hint to the query and force the optimizer to RBO it runs in 5 second
-
CallerInfo in JDeveloper?
How to create the project "CallerInfo" in JDeveloper 9.03 and to start under Embedded OC4J? Thanks, Alexandre.
-
Japanese kanji keyboard on my new MB?!?!?!?
Just got my custom new aluminum MB in the mail and it's got kanji characters along with English characters on the keyboard and the keyboard is not laid out like a US keyboard. I was assuming it would look like the one pictured at Apple's site! I'm as