Windows Media Center Weak/No TV Signal until I restart...

SYSTEM INFORMATION:
I have Windows 7 x64 Home Premium installed on my system. I have a dual TV DVB-T Tuner installed (Geniatech T1880). I have an ASUS M2N68-CM Motherboard, 3.1GHz AMD 64 Dual Core CPU, 4GB DDRII RAM, 1TB HDD space, ATi Radeon HD 4350 512MB Graphics Card.
PROBLEM:
Sometimes, when I try and watch TV on my PC, I get either no TV Signal, or Weak TV signal, no matter what I do, whether its rescan, try new cables, try another Arial socket, none of these work, however, if I just restart, it seams to kick the tuner back into action again, this works every time, although I cannot find what could be causing the issue in the first place.
Any ideas? Any suggestions would be helpful!
Michael.

I have tried the software that the user recommended on the other forum from PetrPruner 's post. That proved for me that my drivers seam to be fine, however, I'm currently in the process of installing some of the latest drivers, and I will report back on that soon!
I also just received a Windows Update from Microsoft regarding Windows Media Center for x64 systems, so I'm going to run some testing, and I'll get back to you on that as well, hopefully with some details on the update itself, and where it can be downloaded if it doesn't come through for anyone.
Update: The latest Windows Media Center update hasn't worked at all for me, no better no worse.
Incase anyone else wants to give it a go, and it hasn't come through Windows Update yet, here's the link:
http://go.microsoft.com/fwlink/?LinkId=179608
Update: I've now updated all of my drivers, and flashed my BIOS... Updating the drivers did nothing but waste time for me, but for others it may work, so try it! Flashing the BIOS seamed to have improved the issue, although after leaving it running for some time, its back, and just as bad, so that hasn't worked either :(
Just done a bit more research following up on PetrPruner's link, which also sugested finding drivers that use the same chipset, but what would be for a different card. This has fixed the slight spiking the DPC Latency Checker software was reporting, although it hasn't fixed the issue with Windows Media Center loosing the signal over time.

Similar Messages

  • 'Windows Media Center Receiver Service' stops and cannot be restarted

    Hi,
    I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
    After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
    that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
    I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
    "0x80070003: File path not found"
    I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
    I tried the following tasks to remedy the issue and none of them were successful:
    Run SFC from cmd prompt - no issues were found
    Changed the 'logon' details for the service from Network to Local
    Changed the start type of the service from manual to automatic
    Restored previous versions of windows - prior to windows updates
    Re-install TV Tuner drivers and software
    Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
    Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
    Re-seat the TV tuner in a new PCI slot
    The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
    It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
    the TV channels in WMC that it then has issues.
    I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
    Any help would be much appreciated!
    Thanks

    I shall suggest you :
    1. uninstall WinTV software and reinstall WMC from the scratch.
    2. Disable AV or any other internet security application during configuring WMC.
    3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
    Run Setup Again.
    Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
    Does it help?
    If the above doesn't help then try resetting WMC:-
    Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
    or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
    Now reconfigure WMC again
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Premiere Elements cause problems with Windows Media Center while streaming to TV.

    I was having the following problem:
    The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
    A user on the Windows 7 forum had the following possible cause and solution.  His response was as follows:
    I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
    I tried the quick fix by un-installing Adobe Premiere Elements.  The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
    Is there another solution for this problem?

    I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured.  With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax".  I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file.  A strange side affect, renaming the file did cause an increase volume. Strange.  

  • Windows Media Center, Windows 7 and HP ATSC/Analog TV Tuner

    I can't get windows media center to find signals using my TV tuner anymore. I used to be able to watch TV on my computer using either a digital antenna or analog cable, but now I can't.
    I'm running Windows 7 (64 bit) on an HPdv6 laptop. I upgraded to windows 7 from vista quite awhile ago, but I can't remember if it stopped working after I installed windows 7 or not. I'm not exactly sure what model number my TV tuner is, but it says it is an HP ATSC/Analog TV Tuner in the device manager. It also says it's manufactured by AverMedia, but it doesn't give the product number or model number. Maybe the tuner isn't compatible with windows 7? There is no way I can find out if I don't know the product number...
    I've tried updating the driver for the tuner, but that didn't help. WMC simply can't pick up a signal from the tuner anymore, so all of the channels are fuzzy.
    What else can I do?

    Nckhammond wrote:
    is it still listed in the  device manager?  its ether an avermedia or hauppauge card. just pick a random win 7 driver for the right brand and force it to install. then update the driver with windows update to get the right one.
    Yes, mine is listed in the device manager as HP ATSC/Analog TV Tuner. When I click on its properties, it says it's made by Avermedia. So you're suggesting that I download a random Avermedia driver? I don't understand what that would do... I already tried to update the driver, and it says I have the most recent version. I also checked the HP site to see if they released a different version or something. Nope, same version that I have installed. Still doesn't work.

  • Using the Apple Remote with Windows Media Center

    Hello guys
    First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
    So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
    Thank you

    I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
    Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
    In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
    If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
    http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b  
    and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
    The Hauppage USB was a good choice because it serves Mac & Windows.
    Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
    http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
    Although this may not answer your question, it describes other options.

  • Problem connect mac to internet with pc w/windows media center os

    I share a wireless DSL connection with my roommate. Everything was working fine for a long time until she bought a Sony PC with Windows Media Center OS on it. Every time she connects to the internet, she doesn't think it works very well for her. But, if she leaves the house (and therefore is not using her computer online) I can reset the DSL modem and the wireless router and then my internet connection from my iBook works like a lovely breeze. Then she comes home, connects her computer and the internet doesn't work for either of us. She insists it is not "her computer" and doesn't believe that I could be receiving such a seamless connection when she's not around. Does anyone know (1) if there are issues with Windows Media Center OS that would cause this problem and (2) What I can do to fix the situation?

    Actually, it sounds like her computer might have a Static IP set, which tries to grab your IP... you might cure it by changing your setup to "Using DHCP with Manual Address" and using a couple numbers higher than what it says when it does work.

  • Windows Media Center and Xbox 360 have stopped communicating

    I've had my Xbox and PC connected for years and have never had an issue until now. My laptop is running Windows 7, and has a wireless connection, but the Xbox is hardwired into my router. Now for some reason, the connection just stopped working. I
    tried deleting the old extender connection in Windows Media Center and generated a new pass code for it on the Xbox. When I enter it in, my PC tells me that my Xbox is connected to a different network, but it's not. I only have the one network and I know my
    PC isn't mistakenly connected to an unsecured, neighboring one. I've unplugged my modem and router, restarted the Xbox and my computer, checked my connection on both devices multiple times, but I can't seem to find a solution. So, what more can I do?

    Check the support web site of the manufacturer of your wireless router for the latest firmware update and install it.  If none is available, proceed to
    Reset Your Router to Factory Default Settings.
    Carey Frisch

  • Problem streaming from Windows Media Center to XBOX 360 with Airports?

    Good evening,
    I have been having an issue trying to stream windows media center from my windows 7 ultimate (64 bit if that helps) to my Xbox 360. My network setup is:
    I have an airport extreme (G) that is plugged into my cable modem and my windows 7 machine. In my living room I have an airport express that extends my wireless signal through out the house but my xbox 360 is plugged into it via ethernet. I have a very fast internet connection that is stable but any transfer between my computer and xbox is very limited it seems. I was wonder if there is a way to get this to work better. When I lunch windows media center on the xbox it sees my pc and it shows the available files but when I try and move from one to the other nothing happens and eventually I get a can't connect error. Would I be better off not connecting via ethernet to the airport express and just buying a wireless adapter?
    Thanks

    You don't say how your devices are connected, whether through your Verizon router or some other way.  If through, say, an Actiontec then you may be having bottleneck issues.  I used to run all my devices through my Actiontec and got poor transfer speeds (it only handles 10/100).  Moving everything on my network to a 10/100/1000 switch helped my transfer speeds to shoot right up ten fold.  This way only the switch gets connected to my Actiontec and my network devices can still get out on the 'net if needed.
    It's ok to try to reinvent the wheel, but just make sure it's round.

  • Touchsmart Iq506t Windows 7, Unable to acess s-video input from windows media center.

    System: Hp Touchsmart IQ506T
                  Windows 7
                  Avermedia (A327) Hybrid mini Pcie Tv Tuner (NTSC/ATSC)
    I purchase this system used without an operating system. I installed windows 7 and downloaded the drivers from Hp. All drivers are installed properly and the Avermedia (A327) mini card driver can be seen in device manager.
    Yet, the A327 tv tuner will not give me access to the s-video input. I can get tv thru the rf connection but I want to use the s-video because it has a cleaner signal.
    Any information about the s-video port will be appreciated..
    Thank you..

    Hi Cnmarsh,
    I understand you are having an issue with the Touchsmart Iq506t with  Windows 7, unable to access s-video input from Windows Media Center.
    I read from your post that drivers are installed properly and the Aver media mini card drivers are seen in device manager.
    I was wondering if the any of the drivers in Device Manager have a Yellow caution?
    Also, is the Touchsmart Iq506t software all up to date?
    You could try to download and run HP PC Hardware Diagnostics tool with this link.
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
    Looking forward to hearing from you.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Windows 10 update deprecates Windows Media Center

    I was looking forward to the Wnidows 10 upgrade until I heard that Windows Media Center was going to be deleted during the update.My PC has great hardware integration with this software; DVB-T firmware and a really usefull remote control. All of which is likely to be unusable after the upgrade. Does HP have any future alternatives under Windows 10 planned that may be adopted by current users to maintain similar functionality?

    According to the Device Manager, the internal TV Tuner is from AVerMedia, an H323 MiniCard Hybrid DVB-T.I have tried a few applications to connect to this tuner, but none have been successful, nor offered functionality similar to Windows Media Center. AVerMedia do not even acknowledge this specific hardware on their site, and their software is bundled with the hardware, which HP have not provided as part of this PC. DVB-T hardware aside, the remote is designed for Windows Media Center, and may not function with other software. The original enquiry was directed towards HP's future computers which will be bundled with Windows 10. If these future computers also have a TV Tuner, will that associated software be functional with current TouchSmart PCs?

  • Windows media center edition on mega pc ?

    hi,
    Is it possible to hae windows media center edition running on the mega pc with everything functionning like tuner, remote control within the media center ?
    Thanks,

    Well if you want my opinion mega center iii disappoints quite a lot so far! Last weekend I had some time writing a test report. I have been testing the megapc just on a regular TV. Initially it worked satisfactory since I was able to change the resulution to 512x384x16bits. This resolution is convenient to read text on an ordinary PAL-TV.
    I won't get in to details concerning the remote control, since often it does not work properly and many people reported that already ... Using MC-III's TV option to record from a set top box might drive you nuts, sometimes for some reason the record function falls back to TV (instead of Composite). Even worse it occurs that winxp freezes when you want to quit recording, also if you end a scheduled recording it is impossible to delete this record until the instructed recording time is over. Let's say if you schedule a program at 01:00am till 03:00am and you cancel the recording process at 01:50am you are unable to reschedule a program till 03:00am, it works when you record instantly otherwise the error "Cannot modify/running or end schedule!" appears). IF you succeeded recording video with MCIII it is a hassle to erase it again via MCIII's menu .. There's an option to delete recorded programs, but for me it didn't (and does) not work, I have to erase it manually from the standard 'My videos'-folder .
    Another feature in MCIII is to put your PC in standby mode, now imagine you have scheduled a record session at 01.00am and at 11.00pm you decide to put the mega180 in stand by mode .. Using a regular video or dvd recorder would start up and records at 01.00am . megapc remains silent .  Another disappointment .. One more to end this story and it concerns viewing a DVD via MC III .. Since I have my resolution set at 512x386x16bits watching DVD's in MCIII is quite funny since people are rather stretched up ( :-) ), also lots of hickups, I could not believe my eyes and I decided to start up MediaPlayer 9 and all issues were resolved, so I was able to to watch a smooth and non bumby screen. Therefore I am really hoping that the mega180pc will be supported one day by winxp media center. Unfortunately I was not able to run the 2004 version, even after upgrading an earlier release .. The media center does install but of course the remote does not work at all .. Well I agree, it often does not work either using mega center III ;-D. Don't get me wrong, megapc is a good product but a lot of programming and adjustments need to be done.
    Here's my config: megapc180, wd250gb (8mb cache), 2x512Mb Kingston 333, AMD3000+, msi tv@master, msi burner 8a...

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • ITunes won't open after using Windows Media Center

    Today I used Windows Media Center so I could play my music and videos through my X-Box. Now when I try to open iTunes it comes up with the message "The folder itunes is on a locked disk or you do not have write permission for this folder". Nothing has been changed, I did not lock anything, and now the folder automatically reverts itself to Read-Only. Please help

    I also tried un and re-installing itunes but it did nothing

  • How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

    I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files.  I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read?  Thanks!!!!

    iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
    What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
    Video Test.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Major Version</key><integer>1</integer>
    <key>Minor Version</key><integer>1</integer>
    <key>Date</key><date>2013-09-26T23:30:26Z</date>
    <key>Application Version</key><string>11.1</string>
    <key>Features</key><integer>5</integer>
    <key>Show Content Ratings</key><true/>
    <key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
    <key>Library Persistent ID</key><string>CCF046191585EA85</string>
    <key>Tracks</key>
    <dict>
    <key>155170</key>
    <dict>
    <key>Track ID</key><integer>155170</integer>
    <key>Name</key><string>Abbott &#38; Costello: "Two Tens For A Five" &#38; "Who's On First"</string>
    <key>Artist</key><string>Abbott &#38; Costello</string>
    <key>Album Artist</key><string>Abbott &#38; Costello</string>
    <key>Album</key><string>Abbott &#38; Costello: "Two Tens For A Five" &#38; "Who's On First"</string>
    <key>Genre</key><string>Comedy Clip</string>
    <key>Kind</key><string>MPEG-4 video file</string>
    <key>Size</key><integer>110483524</integer>
    <key>Total Time</key><integer>532096</integer>
    <key>Year</key><integer>1950</integer>
    <key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
    <key>Date Added</key><date>2012-12-01T17:30:57Z</date>
    <key>Bit Rate</key><integer>156</integer>
    <key>Comments</key><string>www.dvdvideosoft.com</string>
    <key>Artwork Count</key><integer>1</integer>
    <key>Persistent ID</key><string>5AF2C490D1E065CD</string>
    <key>Track Type</key><string>File</string>
    <key>Has Video</key><true/>
    <key>HD</key><false/>
    <key>Video Width</key><integer>1136</integer>
    <key>Video Height</key><integer>640</integer>
    <key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&#38;%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&#38;%20_Who's%2 0on%20First_.mp4</string>
    <key>File Folder Count</key><integer>3</integer>
    <key>Library Folder Count</key><integer>1</integer>
    </dict>
    </dict>
    <key>Playlists</key>
    <array>
    <dict>
    <key>Name</key><string>Video Test</string>
    <key>Playlist ID</key><integer>1930541</integer>
    <key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
    <key>All Items</key><true/>
    <key>Playlist Items</key>
    <array>
    <dict>
    <key>Track ID</key><integer>155170</integer>
    </dict>
    </array>
    </dict>
    </array>
    </dict>
    </plist>
    Such files are easier to interpret if opened with Notepad++.
    tt2

  • How can I use the FM tuner in Windows Media Center?

    Hi everyone.
    New to the threads.
    Found this site while looking for answers to a problem I'm having. ?:|
    I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
    I also have been playing around with Windows Media Center.
    However, I cannot figure out how to operate the FM tuner inside WMC....?
    I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
    Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
    Thank you! :)

    Hello
    I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
    If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
    Bye and good luck!

Maybe you are looking for

  • SAFARI WON'T OPEN [ but firefox works fine ]

    not sure what could be causing this...i tried what some other posts on the same issue suggested, ie opened safari in an another account [ it opened ] also tried getting rid of possible corrupted cookies ... no help at all ,,, does anybody have any id

  • Ipod wont show up in itunes after installing update

    okay so i hadn't updated my ipod in a couple of months (bad i know but we have really slow internet here and it takes forever to download things) then i downloaded the update a couple of days ago and it started installing then came up with an error s

  • Credit memo

    Hello gurus, There is a credit for a shipment that happened back in June - It comes via the EDI210 (shipment costing) report 1. Isit possible that these credit invoices go into a "blocked status" - and not "reject" status - so that we could have them

  • Problems with the SMIL-plugin

    I've played around a little bit with the SMIL-plugin and ran in to some problems that might be possible bugs. Hope somebody could shed some light on this. 1. Adding the attribute clipBegin and/or clipEnd seems to be ignored in the creation of all ele

  • Apache - Weblogic plug-in - Segmentation fault. Please Help me!

    Hi all, Im trying to set up Apache weblogic plug-in, and im having problems with that. Im running Solaris 9 with Apache/1.3.26 (Unix) and Weblogic 7 with sp2. Here is what i did: I copied mod_wl_ssl.so from /bea/weblogic700/server/lib/solaris/mod_wl_