Windows NT does not boot after installing NI-CAN 1.6.0 or security update

We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
Does anyone else have similar experience with this problem?
Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi,
I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
What CAN hardware do you have (PCI, PCMCIA, etc)?.
Let me know this details and I'll try to reproduce the problem.
DiegoF.
National Instruments.

Similar Messages

Windows 7 x64 Professional does not boot after install

Hello.
I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
Following is the event log occurs.
'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
VmName
Win-7_QA-Testing
VmId
5B827557-7009-4D83-AA7C-26A45651EC3A
FailureCategory
<not a known problem>
InstructionByteCount
0
InstructionBytes
Rax
0x10
Rbx
0x80
Rcx
0x0
Rdx
0x80
Rsp
0x200
Rbp
0x6e08
Rsi
0x25da4a
Rdi
0x7da4a
R8
0x0
R9
0x0
R10
0x0
R11
0x0
R12
0x0
R13
0x0
R14
0x0
R15
0x0
Rip
0x9d
Rflags
0x10002
FpControlStatus
7F030000000000000000000000000000
XmmControlStatus
0000000000000000801F0000FFFF0000
Cr0
0x10
Cr2
0x0
Cr3
0x0
Cr4
0x0
Cr8
0x0
Xfem
0x0
Dr0
0x0
Dr1
0x0
Dr2
0x0
Dr3
0x0
Dr6
0xffff0ff0
Dr7
0x400
Es
0002000000000000FFFF000020009300
Cs
00000B0000000000FFFF000000B09F00
Ss
0002000000000000FFFF000020009300
Ds
0002000000000000FFFF000020009300
Fs
0002000000000000FFFF000020009300
Gs
0002000000000000FFFF000020009300
Ldtr
0000000000000000FFFFFFFF00000000
Tr
0000000000000000FFFF000000008B00
Idtr
000000000000FFFF0000000000000000
Gdtr
000000000000270000002B0000000000
Tsc
0x3b48531f8c6
ApicBase
0xfee00900
SysenterCs
0x0
SysenterEip
0x0
SysenterEsp
0x0
PendingInterruption
0x0
Any help will be appreciated.
Thanks

How many vCPU and how much RAM have you given the VM?
Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
Are you using media that has SP1 slip streamed into it?
Have you tried forcing the vm off and then back on again?
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
vCPU = 1
RAM = 2048MB
No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

Windows 7 does not boot after bootcamp installation

Hey!
I installed windows 7 x64 on my MBP 15" retina with bootcamp, and the installation went fine but after the installation when it said " prepairing your desktop" it just restarted and went into boot loop, so I had to boot into mac OSX and make it primary boot. This have happend 3 times, and I've recreated the ISO image on the USB and I've deleted windows 7 and the partition and I have done the whole process over again (3 times) and it still does not work. Sometimes I get into windows 7 the first time and can move around the desktop with the mouse for about 5 seconds, then it says "logging out" and I'm back at the same problem.
What can I do?
Best regards,
Jack Hellberg.

Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1

Mac does not boot after installing bootcamp

hello
installed bootcamp on my mbp with snow leopard today,for the first time mac and windows both started with no problem ,but when i was trying to boot back into the mac again ,it did not boot and just got stuck at the process with turning wheel forever ,showing the apple logo and the turning wheel.
i did try to hold the option button and chose the mac partition ,but again i can not pass thru the turning wheel and apple logo.Does anybody know what the problem is and how can i go beyond this .
thanks.mike

Csound1 wrote:
Have you tried a safe mode boot yet?
Reboot to the OSX partition and hold the shift key down as soon as you hear the chime. You can release the shift when you see the spinning gear wheel.
yes,i did try that too.unfortunately ,hard drive seemed to be the source of the problem.just replaced the hard drive with a brand new one and put this one inside a usb enclosure that i have ,so tomorrow i will get a backup first and then format it again and keep it for the future.
thanks.mike

Windows 7 does not boot after grey screen

Hi,
Right after installing Windows 7 Home 64-bit on Macbook Pro with Retina by boot camp, computer restarts, shows black screen with flashing underscore (_) on left corner, shows grey screen next, restarts again, and then repeats. I cannot log in or do anything. What is the problem?
I have used Boot Camp Assistant and created install disk on my USB flash drive.
When I boot BootCamp on VMware Fusion, Windows starts normally.
Thank you for your advice!

Same problem here.
Windows 7 Ultimate, OSX 10.8.2, MBP13"mid2012
After Installing Windows, everything seemed to work fine. i installed the bootcamp drivers, rebootet many times as expectet.
but since yesterday i got the same "endless repeating booting routine with blinking curser".
the curser blinks for a few seconds, then the mac reboots. very disapointing.

Windows 8 will not boot - After install virtual box (virtualization)

I installed virtual box and now I am unable to start window 8.
I read online that there is a known issue with virtualization on windows 8. They suggested trying to toggle virtualization on/off in the bios which has not solved my problem. Does anyone know of anything else I can do to get my install back? I really do
not want to have to re-install windows. I have only had windows 8 installed for three weeks!

I tried upgrading from VirtualBox 4.3.12 to 4.3.20 and ended up with an unbootable machine (Windows 8.1 Pro 64-bit). It would come up to the desktop but nothing would work - there were no icons on the desktop, the tray applications didn't seem to be loading,
the transparent task bar was shown as a block of solid colour. Pressing CTRL-ALT-DEL brought up the menu where I could choose Task Manager, but the Task Manager itself would not show up, just a dialog warning me that a process was not responding and asking
if I wanted to end the task (I forget the exact wording). Clicking "End task" that dialog removed the dialog only for it to appear again a minute later. It was not possible to do anything with the machine or to open the Task Manager.
I have updated through a number of versions of VirtualBox without issue. 4.3.20 seems to be a bad update. Unless some other recent update has changed something in Windows so that the VirtualBox update now conflicts.
I forced the system to turn off then used System Restore to reset it to an earlier time. System Restore told me it had failed with an error, but then when I rebooted the machine a dialog came up at the desktop saying that System Restore had succeeded. It
works again now but I am stuck with the older version of VirtualBox.

Leopard does not boot after installing latest Safari update

Hi, please help!
I succesfully (or so I thought...) installed the latest Safari/iTunes/Quicktime update and restarted computer. This first restart worked but Safari wouldn't open, so I restarted again... but this time it didn't work! It just gets into a blue blank screen forever...
Regards,
Fico

I reinstalled OS X...

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

Hi,
I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
I have enabled virtualisation technology in the bios. CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
When I install HyperV platform and management tools the computer configures and reboots
AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
Updated to latest asus mainboard bios 1405. Same issue still occurs upon install of hyper V.
Automatic repair does not work and I have to restore from system restore point.
I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
is restoring to a system restore point from before the hyperv feature install.
Please see the following logs which may have further information:
CBS Log
https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
Setuperr
https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
Windows update
https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
Windowsupdate(1)
https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
I logged a job with asus support and their response was:
"Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
This issue is still existing and I'd appreciating any assistance.
Simon

Hi Simon,
Thank you for uploading the Log files.
According to the log files, no actuate clue can be found.
So, I suggest you upload the dump file so that we can help you analyze them.
Automatic Memory Dump Settings on Windows 8:
http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
It also applies to windows 8.1.
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Windows not booting after install (iSCSI)

Hi all,
I am attempting to boot a host over iSCSI but have run into a brick wall trying to get my host to boot after successfull install of the OS.
Without changing the service profile I am able to install and boot VMWare ESX fine. Windows just does not seem to boot.
I can see the iSCSI subsystem is working ok when I connect to the adapter:
SUNINT0001PB-A# connect adapter 4/5/1
adapter 4/5/1 # connect
adapter 4/5/1 (top):1# at
attach-fls attach-mcp
adapter 4/5/1 (top):1# attach-mcp
adapter 4/5/1 (mcp):1# is
iscsi_get_config iscsi_ping
adapter 4/5/1 (mcp):1# iscsi_get_config
vnic iSCSI Configuration:
vnic_id: 6
          link_state: Up
       Initiator Cfg:
     initiator_state: ISCSI_INITIATOR_READY
initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
                vlan: 0
         dhcp status: false
                 IQN: iqn.1992-08.cisco.com:irfjmp0003pb
             IP Addr: 10.250.137.214
         Subnet Mask: 255.255.255.0
             Gateway: 0.0.0.0
          Target Cfg:
          Target Idx: 0
               State: ISCSI_TARGET_READY
          Prev State: ISCSI_TARGET_DISABLED
        Target Error: ISCSI_TARGET_NO_ERROR
                 IQN: iqn.1992-08.com.netapp:sn.1574897996
             IP Addr: 10.250.137.9
                Port: 3260
            Boot Lun: 0
          Ping Stats: Success (20.486ms)
        Session Info:
          session_id: 0
         host_number: 0
          bus_number: 0
           target_id: 0
Regards
Adam

Now it gets even stranger. As suspected the configuration is correct as I now have it booting into windows.
The strange part is, all was working ok until I applied all current updates, then it went into windows recovery mode and can't find my partition for recovery (only option I have is to reboot)
Have no idea what happened, so I re-installed. Re-installed ok, but the same problem as before, no boot volume found.
Re-installed again, but this time I released the windows boot media from the virtual CDROM drive while it was rebooting.
Windows booted sucessfully.
Very Strange.

Help - Mac Mini does not boot after re-install of OS X

Hi,
I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
Any hints for me? I am pretty much stuck right now.
Thanks

Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

Microphone does not function after installing Windows 7 RC on a HP Mini 1000 (1030NR)

Hi. I recently purchased a HP Mini 1000 (1030NR) and upgraded it to Windows 7 Release Canidate. After install, I added the trackpad drivers, and everything else works fine except for the microphone. The computer recognizes it but when I speak nothing happens. The volume is turned up, and if I turn up the Mic Boost, all I hear is static. I have installed what I think are the correct drivers from another poster, to no avail. Also, there are no errors in the device manager. ANy ideas?
Thank you in advance.

As a tempory measure search for SP40662 this package will enable the mic but there is a catch (isnt there always). The catch is that the mic is going to be recognized as the external one and if you plug in headphones you will have to reboot the mini to use the internal mic again. Im using the same set up right now and it works fairly well. Just hope that HP decides to bestow upon us the proper drivers for the mini soon.

Windows NT does not boot after installing NI-CAN 1.6.0 or security update

Similar Messages

Maybe you are looking for