Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
 to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
 storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Similar Messages

  • Windows Server 2008 R2 Backup Fails with error "Parameter is Incorrect"

    When i try to take backup of Windows Server 2008 R2 and Windows Storage server 2008 to External hard drive. It gives error "Parameter is incorrect".
    Am taking full Server backup from server backup utility. Backup includes (System State, Bare metal recovery and 5 local drivers). Full back size is 1.2TB.

    Hi,
    Can you post unedited error event log related to VSS from application log? Are you using windows server backup tool? If yes, please post error event log from "Applications ans Services Logs\Microsoft\Windows\Backup "
    Thanks,
    Umesh.S.K

  • Installing Print Drivers on Server 2008 R2 cluster - Failing with error 0x000000006be

    Hello,
    I'm currently working with a client that has a Cluster that has 24 servers with 84 resources. This cluster is dedicated to printing only. They have multiple types of printer brands and various different models of each brand. The problem is when they try
    to install a Xerox GPD PS, PCL, PCL6 3.3 driver which is the newest driver it has issues with the install with
    "An unexpected error occurred in the print driver. Close the current driver window and retry the operation"
    The other errror is
    "Unable to install printer. Operation could not be completed (error 0x00006be)"
    This happens on all of the clusters and physical machines. What can i do to look and find where the problem lies?

    Here are some of the windows event logs
    Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
    Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
    Exception code: 0x40000015
    Fault offset: 0x000000000002a84e
    Faulting process id: 0x1eb4
    Faulting application start time: 0x01cf80152f074a2e
    Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
    Faulting module path: C:\Windows\system32\msvcrt.dll
    Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
    A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: PrintIsolationHost.exe
    P2: 6.1.7600.16385
    P3: 4a5bd3b1
    P4: msvcrt.dll
    P5: 7.0.7601.17744
    P6: 4eeb033f
    P7: 40000015
    P8: 000000000002a84e
    P9:
    P10:
    Attached files:
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
    Report Status: 4
    The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
    Change the authentication level to Pkt_Privacy and run the script or application again.
    Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
    Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
    Exception code: 0x40000015
    Fault offset: 0x000000000002a84e
    Faulting process id: 0x1eb4
    Faulting application start time: 0x01cf80152f074a2e
    Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
    Faulting module path: C:\Windows\system32\msvcrt.dll
    Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
    A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: PrintIsolationHost.exe
    P2: 6.1.7600.16385
    P3: 4a5bd3b1
    P4: msvcrt.dll
    P5: 7.0.7601.17744
    P6: 4eeb033f
    P7: 40000015
    P8: 000000000002a84e
    P9:
    P10:
    Attached files:
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
    Report Status: 4
    The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
    Change the authentication level to Pkt_Privacy and run the script or application again.
    Under system
    Application popup: Microsoft Visual C++ Runtime Library :
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.
    Application popup: Microsoft Visual C++ Runtime Library :
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.

  • Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

    Hi,
    Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
    DC:windows Server 2008 R2
    Domain functional level:Windows Server 2003
    When Winxp join domain, have no this error message.
    I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
    There have 3 suggestion in this article:
    1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
    Doesnt's work.
    2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
    On my DC, I run netstat -an, reslut as below:
     UDP    192.168.20.3:137       *:*
    3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
    We are not using IPV6.
    This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
    Please help to check this issue.
    Thank you very much.
    BR
    Guo YingHui 

    Hi Guo Ying,
    I have faced this critical error which makes over-writes the host names in the domain when you join.
    For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
    When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
    Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
    Final Resolution is as follows:
    You need to start the dns console on the DC & drop down the domain name.
    Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
    You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
    After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

  • Backup failed with Error: (-50) Creating Directory

    Repeats ad nauseum.
    This is backing up to a second internal drive that is an exact duplicate (in terms of HD model and size).
    Does anyone know what Error -50 means? Lack of permissions? Invalid name (doesn't seem like it)?
    8/30/08 9:06:37 AM /System/Library/CoreServices/backupd Starting standard backup
    8/30/08 9:06:37 AM /System/Library/CoreServices/backupd Backing up to: /Volumes/Sliffy Time/Backups.backupdb
    8/30/08 9:06:58 AM /System/Library/CoreServices/backupd Error: (-50) Creating directory 2008-08-30-090658.inProgress
    8/30/08 9:06:58 AM /System/Library/CoreServices/backupd Failed to make snapshot container.
    8/30/08 9:07:03 AM /System/Library/CoreServices/backupd Backup failed with error: 2

    Hi Glenn,
    Thanks for the suggestion. Nope, it's not listed. The only thing listed is my Time Machine volume.
    After a reboot, Time Machine seems to be working. It's making backups on schedule and the logs look good, not reporting any strangeness.
    A bit bummed about these phantom errors that go away on reboot. I'll keep on eye on the error/reboot frequency.
    Rob

  • Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

    Hello all,
    Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
    Time Capsule won't backup if Modem (Motorola SB6121) attached
    This was on Feb 10th resolved. Few days later I upgraded to Yosemite.  Backups were working fine since.  
    Yesterday I happen to notice my last backup was 5 days ago.  I looked in the console logs and saw:
    2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
    2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    I called Apple.  Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
    But the next hour it failed
    Called Apple again, this time to Sr Advisor.  He suggested factory reset of the TC and set up again.  Also first backup worked then rest failed
    Third call to Apple useless also.  He was asking questions I didn't feel relevant.  He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
    I begged him to collect data to submit to engineering, which will take days to get a reply.
    So I thought I would throw this out to the community....
    TC Is NEW (replaced from last issue).  Mac is 8 months old (iMac 27"), Os is Yosemite,  TC also new (latest model)
    Thanks...

    Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
    Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
    This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Time Machine Backup Failed with error: 2

    I have been doing unattended continuous backups to a 1 TB drive for about 4 months via Time Machine. In the last 2 months I have been getting a dialog box with this message: "Unable to complete backup. An error occurred while creating the backup directory." In each case I have gone to Disk Utility to repair the disk, and each time have had to reboot to get the Repair Disk function to work, since without a reboot, the backup disk won't unmount. After repair, the backups resume, but the frequency of the failures is beginning to worry me. I never had problems with scheduled SuperDuper backups and am thinking of returning to that approach, albeit different.
    Below is what is listed in in the system log after the backup failure. It lists "error: 2", whatever that is.
    The backup disk has over 400GB space remaining.
    Can anyone help me with this?
    May 2 19:34:17 Macintosh /System/Library/CoreServices/backupd[12497]: Backup requested by user
    May 2 19:34:17 Macintosh /System/Library/CoreServices/backupd[12497]: Starting standard backup
    May 2 19:34:26 Macintosh /System/Library/CoreServices/backupd[12497]: Backing up to: /Volumes/WD1TB Backup Disk/Backups.backupdb
    May 2 19:34:28 Macintosh /System/Library/CoreServices/backupd[12497]: Error: (-50) Creating directory 2008-05-02-193428.inProgress
    May 2 19:34:28 Macintosh /System/Library/CoreServices/backupd[12497]: Failed to make snapshot container.
    May 2 19:34:28 Macintosh /System/Library/CoreServices/backupd[12497]: Backup failed with error: 2
    Thanks,
    Art

    Betty - actually, no. Rebooting alone didn't resolve the problem. Time Machine still wouldn't resume backups.
    Once the directory was rebuilt via Disk Utility, it is up and running again, at least for a while.

  • Time Machine. Backup failed with error code: 21

    Hi,
    I recently upgraded to Leopard 10.5.4 mainly for the time machine backup. I'm using a DNS-323 in a RAID1 configuration as the TM backup drive. Also I have the DNS-323 connected to my Airport Extreme through the ethernet to give NAS ability to my home network.
    After much hunting around the forums I got the sparsebundle created and copied to the DNS-323 share volume. See http://www.flokru.org/2008/02/29/time-machine-backups-on-network-shares-in-leopa rd/ My thanks to flokru.
    However, TM is still not working. The console messages have the following:
    Network mountpoint /Volume/Volume_1 not owned by backupd... remounting
    Network volume mounted at /Volume/Volume11
    Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle
    Backup failed with error: 21
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Has anybody else seen this error or better yet, got a fix for it?

    James,
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Actually, it is not TMs failure to mount the volume that is causing your failure to backup. I have received the same Console message using a Time Capsule. However, Time Machines' attempt to 'remount' the volume always succeeds and the backup goes through. That appears not to be your experience, but it is NOT because the volume is not being mounted. It is.
    *Mount Point Conflict (TMDisk-1)*
    NOTE: the following distinguishes “network drive” (the physical hard disk) from “disk image” (the sparsebundle file TM uses to backup to).
    First of all, I am convinced that the second mount point that is created (in your case Volume11) is due to the fact that you already had the network drive mounted on your desktop at the time of the attempted backup. Was that the case?
    When you manually mount a network drive the system creates a mount point in the /Volumes folder (Let’s call it TMDisk ). While that exists any attempt by Time Machine to mount the same disk will created a second mount point ( TMDisk-1 )
    Nevertheless, as I have observed, this doesn't seem to prevent backups from taking place successfully, at least on the Time Capsule. And according to your Console logs it appears that your volume is being ‘remounted’ successfully.
    *”The Backup Disk Image Could Not Be Mounted”*
    The real issue is Time Machines' failure to mount the disk image (sparsebundle) contained on your network drive.
    +Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle+
    +Backup failed with error: 21+
    More often than not this is due to having the Time Machine backup disk image (sparsebundle) mounted on your desktop during a backup attempt.
    Eject the backup disk image (sparsebundle) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    For more information, see an article on this here:
    [http://discussions.apple.com/thread.jspa?threadID=1715977]
    Alternatively, a backup disk image can fail to mount if there is a problem with your computer name.
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to THIS article [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    Let me know if any of this helps.
    Cheers!

  • First Backup fails with Error 11

    Attempting my first backup to my new Western Digital 160GB MyBook, Time Machine exits with an error before finishing the backup. The console output is below:
    Dec 25 14:05:05 Katana /System/Library/CoreServices/backupd[751]: Backup requested by user
    Dec 25 14:05:05 Katana /System/Library/CoreServices/backupd[751]: Starting standard backup
    Dec 25 14:05:05 Katana /System/Library/CoreServices/backupd[751]: Backing up to: /Volumes/Time Machine/Backups.backupdb
    Dec 25 14:05:05 Katana /System/Library/CoreServices/backupd[751]: Ownership is disabled on the backup destination volume. Enabling.
    Dec 25 14:05:05 Katana KernelEventAgent[35]: tid 00000000 received unknown event (256)
    Dec 25 14:05:45 Katana /System/Library/CoreServices/backupd[751]: Backup content size: 37.5 GB excluded items size: 2.5 GB for volume Katana
    Dec 25 14:05:45 Katana /System/Library/CoreServices/backupd[751]: No pre-backup thinning needed: 42.11 GB requested (including padding), 148.96 GB available
    Dec 25 14:05:45 Katana /System/Library/CoreServices/backupd[751]: MDBackupBegin() returned result (909) > 0, waiting
    Dec 25 14:06:15 Katana /System/Library/CoreServices/backupd[751]: Backup requested by automatic scheduler
    Dec 25 14:09:22 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:09:22 Katana kernel[0]:
    Dec 25 14:09:22 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/ko.lproj/iMovieHelp/gfx/frwr4004pn. gif to (null)
    Dec 25 14:09:23 Katana kernel[0]:
    Dec 25 14:09:45 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:09:45 Katana kernel[0]:
    Dec 25 14:09:45: --- last message repeated 1 time ---
    Dec 25 14:09:45 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/ko.lproj/iMovieHelp/gfx/frwr800.gif to (null)
    Dec 25 14:10:10 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:10:10 Katana kernel[0]:
    Dec 25 14:10:10 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/ptPT.lproj/iMovieHelp/sty/access3box.css to (null)
    Dec 25 14:10:10 Katana kernel[0]:
    Dec 25 14:10:34 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:10:34 Katana kernel[0]:
    Dec 25 14:10:34: --- last message repeated 1 time ---
    Dec 25 14:10:34 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/sv.lproj/iMovieHelp/gfx/accessborderinnertopright.gif to (null)
    Dec 25 14:10:57 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:10:57 Katana kernel[0]:
    Dec 25 14:10:57 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/sv.lproj/iMovieHelp/gfx/accessborderleft.gif to (null)
    Dec 25 14:10:57 Katana kernel[0]:
    Dec 25 14:11:20 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:11:20 Katana kernel[0]:
    Dec 25 14:11:20: --- last message repeated 1 time ---
    Dec 25 14:11:20 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/sv.lproj/iMovieHelp/sty/access_3box .css to (null)
    Dec 25 14:11:43 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:11:43 Katana kernel[0]:
    Dec 25 14:12:06: --- last message repeated 1 time ---
    Dec 25 14:11:43 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zhTW.lproj/iMovieHelp/gfx/borderright.gif to (null)
    Dec 25 14:12:06 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:12:06 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zhTW.lproj/iMovieHelp/gfx/bordertop.gif to (null)
    Dec 25 14:12:06 Katana kernel[0]:
    Dec 25 14:12:29: --- last message repeated 1 time ---
    Dec 25 14:12:29 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:12:29 Katana kernel[0]:
    Dec 25 14:12:29 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zhTW.lproj/iMovieHelp/gfx/step2.gif to (null)
    Dec 25 14:12:52 Katana kernel[0]:
    Dec 25 14:12:52 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zhTW.lproj/iMovieHelp/gfx/step3.gif to (null)
    Dec 25 14:12:52 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:12:52 Katana kernel[0]:
    Dec 25 14:13:16: --- last message repeated 1 time ---
    Dec 25 14:13:16 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:13:16 Katana kernel[0]:
    Dec 25 14:13:38: --- last message repeated 1 time ---
    Dec 25 14:13:16 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zh_TW.lproj/iMovieHelp/shrd/opnbnds ig.scpt to (null)
    Dec 25 14:13:39 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:13:38 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Applications/iMovie.app/Contents/Resources/zh_TW.lproj/iMovieHelp/shrd/OpnFile .scpt to (null)
    Dec 25 14:13:39 Katana kernel[0]:
    Dec 25 14:14:09: --- last message repeated 1 time ---
    Dec 25 14:20:22 Katana ntpd[26]: time reset -0.176119 s
    Dec 25 14:27:34 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:27:34 Katana kernel[0]:
    Dec 25 14:27:34 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Stepping Out Short.caf to (null)
    Dec 25 14:27:34 Katana kernel[0]:
    Dec 25 14:27:57 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:27:57 Katana kernel[0]:
    Dec 25 14:27:57: --- last message repeated 1 time ---
    Dec 25 14:27:57 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Strategy.caf to (null)
    Dec 25 14:28:19 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:28:19 Katana kernel[0]:
    Dec 25 14:28:19 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Swing City Long.caf to (null)
    Dec 25 14:28:19 Katana kernel[0]:
    Dec 25 14:28:42 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:28:42 Katana kernel[0]:
    Dec 25 14:29:05: --- last message repeated 1 time ---
    Dec 25 14:28:42 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Swing City Medium.caf to (null)
    Dec 25 14:29:05 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:29:05 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Swing City Short.caf to (null)
    Dec 25 14:29:05 Katana kernel[0]:
    Dec 25 14:29:27: --- last message repeated 1 time ---
    Dec 25 14:29:27 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:29:27 Katana kernel[0]:
    Dec 25 14:29:27: --- last message repeated 1 time ---
    Dec 25 14:29:27 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Tennessee Twister Long.caf to (null)
    Dec 25 14:29:50 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:29:50 Katana kernel[0]:
    Dec 25 14:29:50 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Tennessee Twister Medium.caf to (null)
    Dec 25 14:29:50 Katana kernel[0]:
    Dec 25 14:30:13 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:30:13 Katana kernel[0]:
    Dec 25 14:30:13: --- last message repeated 1 time ---
    Dec 25 14:30:13 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Tennessee Twister Short.caf to (null)
    Dec 25 14:30:58 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:30:58 Katana /System/Library/CoreServices/backupd[751]: Canceling backup.
    Dec 25 14:30:58 Katana kernel[0]:
    Dec 25 14:30:58 Katana /System/Library/CoreServices/backupd[751]: Error: (-36) copying /Library/Audio/Apple Loops/Apple/iLife Sound Effects/Jingles/Three Pointer Long.caf to (null)
    Dec 25 14:30:58 Katana kernel[0]:
    Dec 25 14:30:58 Katana kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
    Dec 25 14:30:58 Katana kernel[0]:
    Dec 25 14:30:58: --- last message repeated 1 time ---
    Dec 25 14:30:58 Katana /System/Library/CoreServices/backupd[751]: Copied 27519 files (5.5 GB) from volume Katana.
    Dec 25 14:30:58 Katana /System/Library/CoreServices/backupd[751]: Copy stage failed with error:11
    Dec 25 14:30:58 Katana /System/Library/CoreServices/backupd[751]: Backup failed with error: 11
    Anyone have any idea what this error means, or how to fix it?

    Check the formatting and partitioning for your Time Machine disk. Launch Disk Utility from the dock or from the Applications > Utilities folder. Click on the upper icon for your Time Machine disk in the left window and the partition type will show on the bottom of the Disk Utility window. It should be GUID for Intel Macs and Apple Partition Map for PPC Macs.
    Click on the indented icon below the upper Time Machine disk icon. That will show the formatting. It should be Mac OS Extended (Journaled). If the formatting and/or partitioning is not correct, reformat following the directions in this article.

  • TM Backup failed with error: 11 -  when copying Movie, image, music files

    TM giving backup errors (for a long time unsolved until I read forum entry about monitoring events with Console prog.) Recently upgraded from 10.5.4 to 10.5.6 with Combo package (attempts at upgrade to 10.5.5 failed with "unknown error")
    I narrowed down to the file types listed by excluding relevant erring folders. TM backup works OK now but without Movies, Photos, Music and small number of applications that appear to fail mainly on copying an image within appl.
    Using Console with "backupd" filter on LOG FILES/system.log (while executing TM backup) gives the following 4 samples of errors:
    1. Dec 21 02:20:03 Macintosh /System/Library/CoreServices/backupd[1627]: Starting standard backup
    Dec 21 02:20:05 Macintosh /System/Library/CoreServices/backupd[1627]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
    Dec 21 02:20:06 Macintosh /System/Library/CoreServices/backupd[1627]: Event store UUIDs don't match for volume: Macintosh HD
    Dec 21 02:20:06 Macintosh /System/Library/CoreServices/backupd[1627]: No pre-backup thinning needed: 64.44 GB requested (including padding), 129.33 GB available
    Dec 21 02:22:31 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:YES Copying /Users/xxxxx/Movies/iMovie Events.localized/New Event 07-04-2008 2/clip-2008-04-07 11;30;45.mov to (null)
    Dec 21 02:22:32 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:NO Copying /Users/xxxxx/Movies/iMovie Events.localized/New Event 07-04-2008 2/clip-2008-04-07 11;30;45.mov to /Volumes/MacBook Backup/Backups.backupdb/............
    2. Dec 21 02:25:23 Macintosh /System/Library/CoreServices/backupd[1627]: Starting standard backup
    Dec 21 02:25:23 Macintosh /System/Library/CoreServices/backupd[1627]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
    Dec 21 02:25:24 Macintosh /System/Library/CoreServices/backupd[1627]: Event store UUIDs don't match for volume: Macintosh HD
    Dec 21 02:25:24 Macintosh /System/Library/CoreServices/backupd[1627]: No pre-backup thinning needed: 64.44 GB requested (including padding), 126.79 GB available
    Dec 21 02:27:46 Macintosh /System/Library/CoreServices/backupd[1627]: Error: (-36) SrcErr:YES Copying /Users/xxxxx/Music/iTunes/iTunes Music/Duck Baker, Maggie Boyle and Ben Paley/The Expatriate Game--Traditional Irish & American Music/07 Rye Whiskey.m4a to (null)
    3.Dec 21 13:17:28 Macintosh /System/Library/CoreServices/backupd[1768]: No pre-backup thinning needed: 6.26 GB requested (including padding), 120.05 GB available
    Dec 21 13:21:11 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/StockXloader.app/Contents/Resources/StockXloaderName.tif to (null)
    Dec 21 13:22:03 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/MacOS/Stox to (null)
    Dec 21 13:22:31 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image002.png to (null)
    Dec 21 13:23:07 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image033.png to (null)
    Dec 21 13:23:31 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image060.png to (null)
    Dec 21 13:24:09 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Investor programs/Stox.app/Contents/Resources/help/Stox Manual_files/image120.png to (null)
    Dec 21 13:27:29 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/MacOS/EyeTV to (null)
    Dec 21 13:27:53 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/authopen to (null)
    Dec 21 13:28:17 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/CinergyDTXS.png to (null)
    Dec 21 13:28:42 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/CinergyTExpress.fscaled.png to (null)
    Dec 21 13:29:07 Macintosh /System/Library/CoreServices/backupd[1768]: Error: (-36) SrcErr:YES Copying /Applications/AApplications Extra/Unproven /EyeTV.app/Contents/Resources/Device Pictures/ElgatoDiversity.fscaled.png to (null)
    4. Dec 21 14:44:46 Macintosh /System/Library/CoreServices/backupd[1858]: Starting standard backup
    Dec 21 14:44:48 Macintosh /System/Library/CoreServices/backupd[1858]: Backing up to: /Volumes/MacBook Backup/Backups.backupdb
    Dec 21 14:45:50 Macintosh /System/Library/CoreServices/backupd[1858]: No pre-backup thinning needed: 2.11 GB requested (including padding), 116.67 GB available
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-36) SrcErr:YES Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to (null)
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-36) SrcErr:NO Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to /Volumes/MacBook Backup/Backups.backupdb/xxxxxxx’s MacBook/2008-12-21-131514.inProgress/58F99FC2-7474-42C9-8DCA-5C99F724CE6E/Macin tosh HD/Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Stopping backup.
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Error: (-8062) SrcErr:NO Copying /Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A/BGComp atibility to /Volumes/MacBook Backup/Backups.backupdb/xxxxxx’s MacBook/2008-12-21-131514.inProgress/58F99FC2-7474-42C9-8DCA-5C99F724CE6E/Macin tosh HD/Applications/iWork '08/Keynote.app/Contents/Frameworks/BGCompatibility.framework/Versions/A
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Copied 52 files (26.7 MB) from volume Macintosh HD.
    Dec 21 14:46:18 Macintosh /System/Library/CoreServices/backupd[1858]: Copy stage failed with error:11
    Dec 21 14:46:24 Macintosh /System/Library/CoreServices/backupd[1858]: Backup failed with error: 11

    solongpc wrote:
    Regardless if this is a general problem or not, does anyone know of any documentation/release notes for common/generic TM error codes? That would be helpful.
    Yeah, many of us would love it! But no such thing exists, at least not that us mere mortals can find.
    There might be another variable that I don't understand right now but at least it is consistent.
    Could it be something funky in the name of one of the folders? Or could the folder object itself be corrupt? Or have some odd extended attribute?
    All I can suggest is calling AppleCare, and/or reporting it as a bug:
    *_Submitting a +Bug Report+ to Apple._*
    |
    This requires a membership in the +Apple Developer Connection,+ but you can get one for free.
    Register here: http://developer.apple.com/programs/start/register/create.php
    Once you receive the confirmation, go to: https://bugreport.apple.com and login.
    Click +New Problem+ at the top.
    Click Help at the top, and/or any of the items underlined in blue for more information.
    Provide as much specific detail as possible, and attach a log, screenshot, etc., as appropriate in the lower section.
    When done, click Submit at the bottom.

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • Backup failed with error: 11 -Error: (-41) SrcErr:NO Copying

    Like many of you, I was unlucky to get the famous TimeMachine error message: "The backup was not performed because an error occurred while copying files to the backup disk". I started to get as much help as I could from Google and all your forum posts.
    Until recently I could not get an easy answer and it seemed that various people had success by:
    - renaming their machine to remove say extraneous characters (such as apostrophe)
    - delete the last "in progress" backup
    - reset the TM
    - etc.
    I did all of that plus reformatting my new WD HDD but nothing changed. After 2 days of frustration with this piece of software (Time Machine), the good news for me is that I can consistently reproduce the error as well succeed in performing a backup. The solution for me seems to make sure that I +*do not have a source directory structure deeper than 15 levels*+. As soon as I have a file that is 16 levels deep from the root of the HDD that I try to backup, I get this error:
    +*Error: (-41) SrcErr:NO Copying /Volumes/<HDD to Backup>/<Deep Directory Structure>... to*+
    +*/Volumes/<Your TM Drive>/Backups.backupdb/<Your Machine>/<Timestamp>.inProgress/<AutoGenerated-GUID>/<HDD to Backup>/<Deep Directory Structure>...*+
    +*Copy stage failed with error:11*+
    +*Backup failed with error: 11*+
    The Console app shows the system log with the path to the file that failed during backup. I tried to make the pathname shorter than 255 characters to make sure this is not an 8bit limitation of some string length in the code. Even if I have a path shorter than 255 characters, TM fails with the above error when the source files are at least 16 levels deep in the directory structure.
    What is most frustrating about this is not the careless and uninformative error message or this apparently non-sense limitation of 15 levels - it might be something historical in Apple's code - but the lack of documentation. In the absence of proper logging and error handling in this piece of code, wouldn't be nice to have some explanation from Apple with regards to what this error #11 means or perhaps what caused this "Error (-41) SrcErr:NO Copying"? I guess most of us would be just fine to know that as per release notes, Apple has this limitation of 15 levels for the source directory structure.

    solongpc wrote:
    Regardless if this is a general problem or not, does anyone know of any documentation/release notes for common/generic TM error codes? That would be helpful.
    Yeah, many of us would love it! But no such thing exists, at least not that us mere mortals can find.
    There might be another variable that I don't understand right now but at least it is consistent.
    Could it be something funky in the name of one of the folders? Or could the folder object itself be corrupt? Or have some odd extended attribute?
    All I can suggest is calling AppleCare, and/or reporting it as a bug:
    *_Submitting a +Bug Report+ to Apple._*
    |
    This requires a membership in the +Apple Developer Connection,+ but you can get one for free.
    Register here: http://developer.apple.com/programs/start/register/create.php
    Once you receive the confirmation, go to: https://bugreport.apple.com and login.
    Click +New Problem+ at the top.
    Click Help at the top, and/or any of the items underlined in blue for more information.
    Provide as much specific detail as possible, and attach a log, screenshot, etc., as appropriate in the lower section.
    When done, click Submit at the bottom.

  • Windows Installer (MSI 5.0) fails with ERROR 1939 during "MsiConfigureServices" action

    When trying to install a setup package using the new MSI 5.0 features of Windows Service Configuration (using Tables: MsiServiceConfig / MsiServiceConfigFailureActions)
    the service config fails and results in a rollback.
    The service itself is installed along with the same package under "LocalSystem" account.
    Regarding MSDN, these feature does have some limitations, but I am not shure if they are applicable here:
    "The services configuration feature of the Windows Installer cannot configure network service accounts, install shared service host (svchost) processes, or restart services stopped as part of the installation"
    (see
    http://msdn.microsoft.com/en-us/library/windows/desktop/dd408113(v=vs.85).aspx )
    I have tried this with serveral variations on the failure actions count and type.
    Using SC_ACTION_NONE or SC_ACTION_RUN_COMMAND actions indeed work and lead to a successful install.
    Can you tell, why SC_ACTION_RESTART or SC_ACTION_REBOOT does not work fine?
    PS: The guys on MS Connect didn't want so solve that issue ;-)
    https://connect.microsoft.com/WindowsServer/feedback/details/785032/windows-installer-msi-5-0-fails-with-error-1939-during-msiconfigureservices-action

    Hi,
    For this query, I suggest ask in MSDN forum
    http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
    TechNet Subscriber Support |If you have any feedback on Technet forum, please contact [email protected]

  • What to do about Backup failed with error: The target volume is read-only

    This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again. Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
    Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.

    Pondini wrote:
    odysseus wrote:
    This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again.
    Try repairing the sparse bundle, per #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
    I've tried this before, but it can't be repaired, because it can't be mounted.
    Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
    One possibility is, the HD in the Time Capsule is beginning to fail (all HDs fail, sooner or later).
    I'm backing up to my own sparseimage bundle just fine.
    Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.
    Those two things may be related. Whatever's going wrong may very well be what's corrupting the backups.
    I'd recommend finding out what's wrong with the Powerbook. It's impossible to tell, of course, but that may be the root of the problem.
    There's a problem with PowerBooks and Cinema Displays. I've posted a lot about this. Even after a motherboard replacement, my PowerBook G4/1.67 GHz had freezes, and eventually Apple gave me a MacBook Pro, but I think there's a failure involving hardware/software design.
    If you haven't yet, I'd start by dong a +*Verify Disk+* on it's internal HD (also per #A5);
    That checks out fine.
    if there are no errors, or they're fixed and the problem continues, run the +Apple Hardware Test+ from the disc that came with the Mac. (One of the discs should have that, and instructions for running it, printed in tiny type on the label).
    If still no help, I'd be inclined to do an +Archive & Install, preserving users & settings,+ of Leopard, then download & install the appropriate "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate (change the last "8" to the desired number). Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

  • Time Machine backup failed with error 11 (RAID Slice)

    Disk Utility Verified OK and I have erased and started again. I'm still getting intermittent failed errors with my RAID set up (it's been happening more often as the weeks progressed). Is it possible one my Time Machine drives (shown below) are just going bad?
    Here's the Console log report:
    3/5/14 3:15:00 PM
    com.apple.backupd[1073]
    Starting standard backup
    3/5/14 3:15:00 PM
    com.apple.backupd[1073]
    Backing up to: /Volumes/PGXRAID-02/Backups.backupdb
    3/5/14 3:15:28 PM
    com.apple.backupd[1073]
    No pre-backup thinning needed: 879.0 MB requested (including padding), 845.06 GB available
    3/5/14 3:15:28 PM
    com.apple.backupd[1073]
    Waiting for index to be ready (100)
    3/5/14 3:15:41 PM
    com.apple.backupd[1073]
    Copied 633 files (15 KB) from volume Photo-Grafix.
    3/5/14 3:15:57 PM
    Typinator[212]
    re-enabling tap: -2, times=(0.000, 0.000, 0.000, 0.000, 0.000)
    3/5/14 3:16:13 PM
    com.apple.backupd[1073]
    Error: (-36) SrcErr:NO Copying /Users/macprouser01/.dropbox/sigstore.dbx to /Volumes/PGXRAID-02/Backups.backupdb/MacProAdmin’s Mac Pro/2014-03-05-083503.inProgress/0D116102-5F8A-47C0-9D79-C4C78E2B1EF8/Mecca/Use rs/macprouser01/.dropbox
    3/5/14 3:16:13 PM
    com.apple.backupd[1073]
    Stopping backup.
    3/5/14 3:16:13 PM
    com.apple.backupd[1073]
    Error: (-8062) SrcErr:NO Copying /Users/macprouser01/.dropbox/sigstore.dbx to /Volumes/PGXRAID-02/Backups.backupdb/MacProAdmin’s Mac Pro/2014-03-05-083503.inProgress/0D116102-5F8A-47C0-9D79-C4C78E2B1EF8/Mecca/Use rs/macprouser01/.dropbox
    3/5/14 3:16:13 PM
    com.apple.backupd[1073]
    Copied 1508 files (109.3 MB) from volume Mecca.
    3/5/14 3:16:13 PM
    com.apple.backupd[1073]
    Copy stage failed with error:11
    3/5/14 3:16:19 PM
    com.apple.backupd[1073]
    Backup failed with error: 11

    Still backing up since last night...But seems some errors crept up and TM retried. Another error#11 and a -36
    3/5/14 10:35:03 PM
    com.apple.backupd[5200]
    Copied 413.6 GB of 1793.4 GB, 1517098 of 2656716 items
    3/5/14 11:35:04 PM
    com.apple.backupd[5200]
    Copied 489.6 GB of 1793.4 GB, 1628446 of 2656716 items
    3/6/14 12:35:04 AM
    com.apple.backupd[5200]
    Copied 607.3 GB of 1793.4 GB, 1637474 of 2656716 items
    3/6/14 1:21:57 AM
    com.apple.backupd[5200]
    Copied 1645192 files (689.3 GB) from volume Mecca.
    3/6/14 1:21:59 AM
    com.apple.backupd[5200]
    Waiting for index to be ready (100)
    3/6/14 1:22:59 AM
    com.apple.backupd[5200]
    Waiting for index to be ready (100)
    3/6/14 1:23:59 AM
    com.apple.backupd[5200]
    Waiting for index to be ready (100)
    3/6/14 1:24:59 AM
    com.apple.backupd[5200]
    Waiting for index to be ready (100)
    3/6/14 1:35:05 AM
    com.apple.backupd[5200]
    Copied 708.0 GB of 1793.4 GB, 1647783 of 2656716 items
    3/6/14 2:35:05 AM
    com.apple.backupd[5200]
    Copied 826.2 GB of 1793.4 GB, 1661209 of 2656716 items
    3/6/14 3:18:04 AM
    com.apple.backupd[5200]
    Error: (-36) SrcErr:NO Copying /Volumes/Maryam/HVR/9003-Creatista/2012/05-Approved/2012-08-Caitlin-5728.tif to /Volumes/PGX-RAID-03/Backups.backupdb/MacProAdmin’s Mac Pro/2014-03-05-173408.inProgress/D6CBF0C7-550B-4138-938C-DA5E18C8E65D/Maryam/HV R/9003-Creatista/2012/05-Approved
    3/6/14 3:18:05 AM
    com.apple.backupd[5200]
    Stopping backup.
    3/6/14 3:18:05 AM
    com.apple.backupd[5200]
    Error: (-8062) SrcErr:NO Copying /Volumes/Maryam/HVR/9003-Creatista/2012/05-Approved/2012-08-Caitlin-5728.tif to /Volumes/PGX-RAID-03/Backups.backupdb/MacProAdmin’s Mac Pro/2014-03-05-173408.inProgress/D6CBF0C7-550B-4138-938C-DA5E18C8E65D/Maryam/HV R/9003-Creatista/2012/05-Approved
    3/6/14 3:18:06 AM
    com.apple.backupd[5200]
    Copied 1662808 files (914.3 GB) from volume Maryam.
    3/6/14 3:18:06 AM
    com.apple.backupd[5200]
    Copy stage failed with error:11
    3/6/14 3:18:11 AM
    com.apple.backupd[5200]
    Backup failed with error: 11
    3/6/14 3:33:47 AM
    com.apple.backupd[5200]
    Starting standard backup
    3/6/14 3:33:47 AM
    com.apple.backupd[5200]
    Backing up to: /Volumes/PGX-RAID-03/Backups.backupdb
    3/6/14 3:33:56 AM
    com.apple.backupd[5200]
    No pre-backup thinning needed: 1.04 TB requested (including padding), 1.82 TB available
    3/6/14 3:34:00 AM
    com.apple.backupd[5200]
    Copied 17 files (0 bytes) from volume Photo-Grafix.
    3/6/14 3:34:10 AM
    com.apple.backupd[5200]
    Copied 30 files (153 bytes) from volume Mecca.
    3/6/14 4:33:57 AM
    com.apple.backupd[5200]
    Copied 192.4 GB of 883.7 GB, 2174 of 2656716 items
    3/6/14 5:33:58 AM
    com.apple.backupd[5200]
    Copied 383.7 GB of 883.7 GB, 10318 of 2656716 items
    3/6/14 6:33:59 AM
    com.apple.backupd[5200]
    Copied 578.0 GB of 883.7 GB, 11527 of 2656716 items

Maybe you are looking for

  • Accessing objects of pdf file using javascript

    Is there a way, using javascript, to accsess objects that are defined in the pdf file, but where not defined using javascript. I would like for instance, to access a text stream, or any kind of stream using javascript. Thanks Moshe

  • Flash Is Slow/Crashes? How can I OVERCLOCK Flash?

    This is clearly not an isolated problem as multiple similar inquiries have already been made on this topic: http://forums.adobe.com/message/5577432#5577432 http://forums.adobe.com/thread/933530 http://forums.adobe.com/message/3722411#3722411 Moreover

  • Unable to print pdf, print command goes to save screen after installing acrobat reader X update

    I have Dell Inspiron and brother MFC 7345N printer. Pdf printing was fine until I installed adobe reader security update this morning.  Now I cannot print pdf. When I select print command and enter specification, the try to print, I am routed to the

  • How to change US brought mobile sw in india

    hi friends, my brother brougt iphone 3g in US now i am using that in india i  got some problem  in my phone so i try to reset using itune it shows 1015 error i try with the service center (data logic, chennai)also they told it purchase in us not able

  • E-mail photos using aol

    Hi, I have a mini mac with iphoto 5 and would like to e-mail photos using aol. I've tried going to preferences but AOL isn't highlighted, only mail is. Please help.