Windows Server 2008 Standard 64 bit edt support Hyper-v replication

Dear Team.
Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
If my primary physical server down so my secondary server act as primary server.

Hi,
Windows Server 2008 Hyper-V do not Support Hyper-V replica.
This is a new Feature in Hyper-V for Windows Server 2012.
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
Regards
Sebastian

Similar Messages

Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

Hello,
For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
Thanks

At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Certification is a little more strict than supported, but extended support ended in January. REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
There's always lifetime support, but your case shows how useful that can be.

Installing CF9 on Windows Server 2008 Standard 64-bit

Hi-
I'm attempting to install a new ColdFusion configuration with a host who is useless regarding the support that they offer (for now, they shall remain nameless).
It's a Windows Server 2008 Standard 64 bit VPS configuration. MySQL is already installed so I'm on the hook to configure ColdFusion 9 with IIS (7.5, I believe). There are numerous settings which the installer does not seem to address so I've had to address several Module Mappings which failed during the install....
Can anyone point me to an installation doc for the above configuration? Will the CF installer eventually handle these issues or are we on our own to support this?
Thanks in advance,
Rich

My advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.

USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit

Hi,
I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
find it in the Download Center either.
Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
Regards
Naz

Hi,
Thanks for your posting.
For this issue, i think you need to search in the HP official website or contact the HP support.
Regards.
Vivian Wang

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?

Hi.
I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
If you can provide for all the versions that would be great.
-Thanks
- Ajay Chanana

Hi,
You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
For more detailed information, please refer to the link below:
FAQ Week for NLB: Tuesday
Best regards,
Susie

Oracle ODBC version error on windows server 2008 64 bit

We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
Please give solution for the said issue. Thanks in advance.

SAP said it is Oracle not support windows server 2008.

Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2

In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.A

Download correct version from Microsoft Update Catalog. Run it with elevated rights.
M.

Intermittant disconnection of Shared Drives on Windows 7 Client machines hosted in WIndows Server 2008 Standard Edition

The environment - Windows Server 2008 Standard/Windows 7 32 bit Client machine.
Share - It is not a DFS share.
Antivirus - McAfee
The issue - 1 user is unable to connect to a particular shared drive hosted from within the Windows Server 2008 Standard file server. This drive is one of the multiple drives which are supposed to be connected to the user machine during logon using
the logon script. All the other drives mentioned in the logon script gets mapped fine but one particular drive does not. The user uses a laptop and we have checked his connections while in LAN, Wireless, VPN. Everything seems to be working
fine apart from this one shared drive. Rest of the users within that office gets the drive fine but just not this one user. Since we are not domain admins so we do not have a visibility of the group policies linked to this particular drive and
hence RSOP as well does not help. We have not seen the user getting logged into the machine using a TEMP profile as well for us to ascertain that the issue may be with a TEMP profile logon.
Please note that the drive does get connected at times and at times the connection just drops off! As an interim measure the local IT has created a batch file and given it to the user which maps the drive for the user.
Any help in resolving this long impending issue would be much appreciated!
Suman

Hi Suman,
You could keep the session always active to workaround this issue. Please open Control Panel -> Administrative tools -> Local Security Policy -> Local Policy -> Security Options and set the value of the policy Microsoft Network Server:Amount
of idle time required before suspending a session to 99999 and see how it works.
This security setting determines the amount of continuous idle time that must pass in a Server Message Block (SMB) session before the session is suspended due to inactivity. Administrators can use this policy to control when a computer suspends an inactive
SMB session. If client activity resumes, the session is automatically reestablished. For this policy setting, a value of 0 means to disconnect an idle session as quickly as is reasonably possible. The maximum value is 99999, which is 208 days; in effect, this
value disables the policy.
For more detailed information, please refer to the thread below:
Loss of mapped drive, networked drive disconnects
http://social.technet.microsoft.com/Forums/windows/en-US/c6da707b-5224-40f5-8d0e-e8985453221d/loss-of-mapped-drive-networked-drive-disconnects
You could also refer to the article below to troubleshoot the issue:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 RDP Issues with Windows Server 2008 Standard.

I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

Hi Forum,
I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
The application does not run and throws the following error in the event log.
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
Please suggest me if i am missing something. Please let me know how can i debug this issue?

Hello,
Crystal reports XIR2 is not supported on Windows server 2008.
Check the supporting platforms guide here.
[Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
Thanks,
Bhushan.

How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?

According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]

Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.

Hi,
Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.
Getting the following exception when installing BPEL
oracle.as.install.util.ActionFailedException : java.io.FileNotFound Exception :
D:\software\bpel\bpel_oc4j\install\log.properties(The system couldnot find the specified).
at oracle.as.install.action.LogConfigAction.execution(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
Caused by : java.io.FileNotFoundException : D:\software\bpel\bpel_oc4j\install\log.properties
(The system cannot find the specified file)
at java.io.FileInputStrem.open(Native Method)
at java.io.FileInputStrem.<init>(Unknown Source)
at oracle.as.install.action.LogConfigAction.execute(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
In the unzipped BPEL software folder for installation there is no such file.
Have installed several Oracle SOA suite 10.3.1.0 on windows server 2003 - 32 bit using the same software.
But now am using it along with a patch- p6712338 for windows server 2008-64 bit.

If this is a production instance, you should NOT read past this sentence -- contact Oracle support to do it right.
If this is just for testing/experiments, have you tried putting an empty file at D:\software\bpel\bpel_oc4j\install\log.properties? How about putting a copy of the file from one of your "windows server 2003 - 32 bit" installations?
Good luck, Andy

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

BOE XI R2 on Windows Server 2008 64 Bit Machine

Hi,
We are trying to install BOE XI R2 on Windows Server 2008 64 Bit Machine.
For some reason when the install finishes we dont get all the Program Icons (Like .Net Admin Launchpad).
Are there any different steps that we have to take to get a successful installation? Will XI 3.1 take care of this?
Thank you
Edited by: Charlie DeSaussure on Jan 22, 2010 8:44 PM
Edited by: Charlie DeSaussure on Jan 22, 2010 9:40 PM

Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful.

Windows Server 2008 Standard 64 bit edt support Hyper-v replication

Similar Messages

Maybe you are looking for