Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.
Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.
Similar Messages
-
Audio service hangs on Windows Server 2008R2 with Remote Desktop Services
Hello!
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message:
Error container , type 0
Event name: AppHangXProcB1
Reply: No data
Ident CAB: 0
Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16446
P3: 4fb57c8f
P4: 77c1
P5: 131200
P6: svchost.exe:AudioClientRpc
P7: 0.0.0.0
P8:
P9:
P10:
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events.
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device.
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely.Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server? -
Does Windows Server 2012 support Remote Desktop Client 6.1?
Hi,
Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
Thanks,
Jimthis should help you
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS -
VMM 2012R2 UR4 - Version 3.2.7768.0
Not sure when this started happening since I haven't had to update or create a new RunAs account in VMM in some time, but every time I do, either through the console or through PowerShell it throws an error about The specified directory service attribute
or value does not exist. The VMM Service account is the same as it always has been, and other than this issue everything with VMM is working fine. The full text of the error message is below.
I am hoping someone has some ideas because I don't have any more at this point.
------------------- Error Report -------------------
Error report created 12/22/2014 9:43:33 AM
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7768.0
P3(assemblyName)=Microsoft.Cryptography.DKM.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys
P6(exceptionType)=System.Runtime.InteropServices.COMException
P7(callstackHash)=d0d2
SCVMM Version=3.2.7768.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7768.0
Executable Name=vmmservice.exe
Executable Version=3.2.7768.0
Base Exception Target Site=140712994535888
Base Exception Assembly name=System.DirectoryServices.dll
Base Exception Method Name=System.DirectoryServices.DirectoryEntry.Bind
Exception Message=The specified directory service attribute or value does not exist.
EIP=0x00007ffa67d15bf8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.Runtime.InteropServices.COMException (0x8007200A): The specified directory service attribute or value does not exist.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
--------------- exception.StackTrace ---------------
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.0.30319.34014
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=6.3.9600.17090
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=6.3.9600.16384
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7768.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 4356 (0x1104)
Managed Thread ID = 18
Native Thread ID = 5520 (0x1590)
MCITP | VCP4 | VCP5Hi,
You want userPrincipalName, not userPrincipleName.
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680857%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh -
Import app to svn when run app package weblogic.xml.process does not exist
Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks.Hi,
i am versioning my adf application to a server with subversion, the initial import of the application works ok, but when i tried to run it, it does not found all weblogic classes.....
Error(16,28): package weblogic.xml.process does not exist
Error(6,25): package weblogic.security does not exist
Error(8,34): package weblogic.security.services does not exist
Error(9,33): package weblogic.servlet.security does not exist
Error(39,36): cannot find class SimpleCallbackHandler
Error(41,26): cannot find variable Authentication
Error(42,6): cannot find variable ServletAuthentication
any ideas??
thanks. -
I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Hi guys ,
I have actvated the above mentioned template in business content but when i performed a check in RS_TEMPLATE_MAINTAIN_70 , iam getting the followiong error.
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Web Item Report error: The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
The report cannot be opened
The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
Check whether the report is at this location and it can be read
Contact your system administrator. This error was recorded
Can anyone have some idea on this..
thanksAny help on this??
-
High availability SQL Server requirements for Remote Desktop Services in Windows Server 2012
Good night,
Thanks for reading this question, I do not write much English.
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf, I searched in different microsoft link but I have not received a response.
Kindly appreciate your cooperation and attention.Hi Alejandro,
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf
If you want to know the size requirements of .mdf abd .ldf files, since they are parts of SQL database, I suggest you refer to SQL forums below to get more professional support:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlgetstarted
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
In addition, here are some articles regarding RDS deployment for you:
Remote Desktop Services Deployment Guide
https://technet.microsoft.com/en-us/library/ff710446(v=ws.10).aspx
Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style
http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Windows Server 2012 Standard - Remote Desktop Management service won't start
Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!
Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki -
Windows Server 2008 R2 Remote Desktop - The requested session access is denied
Hi, I have been using Windows Server 2008 R2 since it was released, and have 100 servers up and running. I configured Allow Remote Desktop on all of them and have been able to connect to them and manage them via RDP since then. I also have two servers configured as Remote Desktop Services.
That was up until yesterday. Yesterday afternoon I started getting the The requested session access is denied. I managed all Terminal services via Group Policy and have three users entered.
I am connecting to the servers via Windows XP SP3 and Windows 7. Both clients have been updated to the latest Remote Desktop Services client.
I have been searching for the answer, and I am not finding it.
I have also tried KB954369 without any success.
Thanks,
BrianOk, from my trials and tribulations and discussions with Microsoft I have identified the following;
Assumptions;
A. My terminal server is in domain widget
B. All the users are in domain contoso
1. I had the Terminal Server configurured with a specific Login, which would launch a specific application only and not give them any desktop functions. Wiht this configured this way, I get the error I wrote about.
2. If I turn the specific login off, then I can login normally and perform the functions as Administrator that I need/want to do.
3. Microsoft said to configure the Terminal Server with Single Sign-on. I did as instructed and went thru all the steps, however because my terminal server is in domain widget, the users get prompted twice each time for login. Once on the website, and then again as the application launches. Microsoft said that the users needed to Remote Desktop Client 7.x or the self-signed certificate that I have has to be included in the domain contoso certificate authority so that they will not be prompted for the second sign-on.
4. Conclusions - I need to have a chat with our enterprise security team about including the self-signed certificate in the contoso certificate authority. I need to also work on my RDWeb website so that it meets our company standard look.
Here are the links that Microsoft provided;
http://technet.microsoft.com/en-us/library/cc772108(WS.10).aspx
Enable RDC Client Single Sign-On for Remote Desktop Services
http://technet.microsoft.com/en-us/library/cc742808.aspx
Blogs -
http://blogs.msdn.com/rds/archive/2007/04/19/how-to-enable-single-sign-on-for-my-terminal-server-connections.aspx
http://blogs.msdn.com/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
http://blogs.msdn.com/rds/archive/2009/06/05/publishing-in-windows-server-2008-r2.aspx
http://blogs.technet.com/pfe-ireland/archive/2008/09/05/windows-server-2008-terminal-services-presentation-virtualisation-and-windows-xp-clients.aspx
I hope this help you in your troubleshooting.
Brian -
Setting display language Server 2012 R2 Remote Desktop Services
I'm trying to setup local display language when user logs on to my Remote Desktop Services server.
I have configured the following GPO:
User Configuration/Policies/Administrative Templates/Control Panel/Regional
and Language Options/
Restrict selection of Windows menus and dialogs language
Restricts the UI languages Windows should use for the selected user
When I log on the user display language is not set, but it seems that the GPO has been applied correctly (GPResult)....
What am I doing wrong ?Hi,
Thank you for your posting in Windows Server Forum.
As you have configured GPO setting, please have a look at registry setting and check whether it is properly configured over there.
The Display Language was controlled by the REG_MULTI_SZ key PreferredUILanguages under
HKCU\Control Panel\Desktop
Create this key "PreferredUILanguages" with ja-jp when need Japanese and delete it to get back English.
You can export this Registry Key and import it instead of edit this key directly.
[HKEY_CURRENT_USER\Control Panel\Desktop]
"PreferredUILanguages"=hex(7):6a,00,61,00,2d,00,6a,00,70,00,00,00,00,00
Hope it helps!
Thanks.
Dharmesh Solanki -
Adobe Acrobat X on Server 2003 (using remote desktop services)
Hi guys,
I need to purchase a copy of Adobe Acrobat for Windows Server 2003 for use in Microsoft Dynamics GP 2010, as well as everyday Acobat read/write tasks. There will be about 4 or 5 simultaneous users connecting to the server using RDP (via Windows Vista and 7).
My question is, will a single copy of Adobe Acrobat X Standard suffice or work properly on Windows Server 2003 for all users?
I can't seem to find any information on Adobe Acrobat X and terminal services (or Remote Desktop Services).
Hope I've made sense, and any help will be appreciated
Thanks
-RhydzHi,
What Word prompts when user attempts to login with the original account? Any error messages?
Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
We lack testing environment here for this kind of issues, and we have another dedicated support teams in
Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Dictionary Option in Word 2013 Standard on Server 2012 R2 Remote Desktop Services Server
We have a customer running Server 2012 R2 RDS with Office 2013 Standard. They are licensed for Office 2013 via Office 365. Office 2013 Standard is installed on the server via a using the Volume license as directed by MS.
Each user has a Microsoft Office 365 account.
When the user attempts to use the Right Click -> Define Option in MS Word, the user is prompted to sign in so they can select a dictionary.
This is where the problem begins. The login process does not accept the users Office365 account. I was able to create a new Microsoft account (using the same email address as the Office 365 account) and select a dictionary.
Is this the only method to get the dictionary to work? All 100 users must create another Microsoft account and use that to select a dictionary?Hi,
What Word prompts when user attempts to login with the original account? Any error messages?
Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
We lack testing environment here for this kind of issues, and we have another dedicated support teams in
Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Reports in BIDS does not update when stored procedure is modified
Hi,
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have
found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
However, I would like to find a better, and permanent solution. Please comment.
Thank you!Hi AmirBabazadeh,
Base on my research, this issue is caused by data caching in the Business Intelligence Development Studio (BIDS). When we modify the stored procedure in Management Studio, but the data of the report doesn’t change, then it will try to cached data when reprocessing
the report. In this scenario, we should try to refresh the report/dataset, or delete the .rdl.data file to avoid this issue as you are now doing.
In order to refresh the data of the report, the following two methods are for your reference:
Manual refresh: Re-run the stored procedure with Query Designer in Dataset Properties dialog box.
Auto refresh: Set the AutoRefresh property of report to an appropriate value in the Properties window.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Hello, Encountered a wiered problem today. All of a sudden the screen stopped displaying. The touch seems to be working fine(as the double tap wakes up the phone), but the screen is blank. Tried with soft re-set, phone restarts, I get a pixalated alt
-
How many musicians can mainstage support at once?
I have LP8 and will be upgrading to 9 but have never used mainstage. Can only one person at a time use this or could our band run 2 guitars and 1 bass with amp designer, and 4 vocalists (effects) all at once from 1 MacBook pro? Does anyone here do th
-
Upgrade to Mountain Lion and Exciting Crashes
I upgraded to Mountain Lion the other week, since I'd been hearing good things about it. Sadly, that seems to have been a MAJOR mistake. I am experiencing two types of crashes that may or may not be linked to Safari or the Finder. Crash Type 1] Milli
-
Youtube video not working in powerpoint
i put a youtube video in a powerpoint. Got message i needed the flashplayer. hit websupport and it says successful installed. When I try to view the video, I still get the same message.
-
hi, im trying to make a window in an applet, display content of another site, a bit like if i was using <iFrame> in html. now the thing is i have no idea what-so-ever how to do this, i tried with JEditorPane, but that cant read Java, javascript, ect.