Windows Server 2012r2 Essentials - Dashboard - Server Folder and Hard Drives Not Showing..

Hi,
Following the last series of Windows updates, I'm experiencing problems with our WS2012R2 Essentials server. When opening the Dashboard, the 'home:getting started' tab shows all correct except 'server folders n/a'. On checking the Storage tab, the normal
display for 'server folders' and 'hard drives' just shows 'refreshing list of items'.
Despite symptoms above, Storage Space and Server Folders show correctly in server Windows Explorer and are available to client computers across the LAN. It just appears that for some reason the Dashboard cannot see them.
One other related symptom I've noted is that for some reason the 'wsestoragesvc' Windows Server Essentials Storage Service no longer starts automatically. Even when started manually Dashboard symptoms remain - server folders and hard drives aren't visible
on dashboard.
I've run sfc /scannow to check for problems - all clear and run chkdsk on the system volume.
Would welcome ideas on what steps to be taken to fix problem. Many thanks..

Hi,
The issue could be due to a custom service knocks on effect on the Windows Server Essentials Storage Service and causes the service no longer starts automatically.
You could refer to the thread below to troubleshoot the issue:
WHS 2011 Dashboard shows no users or drives
https://social.microsoft.com/Forums/en-US/99fe8229-091e-4130-a279-19e0b8d8a0a8/whs-2011-dashboard-shows-no-users-or-drives?forum=whs2011
If the issue still exists, try to reinstall the Windows Server Essentials.
Dashboard storage tab does not show folders or hard drives
https://social.technet.microsoft.com/Forums/en-US/d0c280cc-b0db-48d4-b649-d0db476fb4b5/dashboard-storage-tab-does-not-show-folders-or-hard-drives?foru
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Memory modules and hard drive not recognized

I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
Solved!
Go to Solution.

When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

IPhone 5 sending all "Sent Emails" to "Trash" Folder and deleted items not showing up at all

My boss has an iPhone 5 and today she realized that trash folder only has the last 50 emails that she has sent.
The trash folder is empty.
We use gmail. Her outlook is fine and the web interface is fine. She's tried restarting her phone. Will we have to delete the account and resync? (please say no...)
Thanks!

Dear Mr. Rakesh Vijayan,
What is your justification for below behavior?
Using basic Gapps (free) email server,IMAP option client with MSO2013. Window 7 professional
MO Professional Plus,
(15.0.4535.1006), MSO(15.0.4535.1507)32-bit.
Auto migrated/upgraded from MS2007 to MS2013 in March, 2013.
Inbox repair tools has been run 03 times since last 6 months in safe mode..
Already configured Settings> advanced and deselect "Do not save copies of sent items
Already configured File > Account Setting > double-click your IMAP account and adjust "Mail to keep offline" to "All".
Since March 2013, 95% mails are getting saved/appearing in Sent Items folder. Only some times few mails are not appearing in sent item outlook client folder.
All those emails are also appearing in All mail Folders.
Any email sent from Gapps web interface/browser definitely getting save/ appearing in sent item outlook client folder.
But now since last 4 days no email sent using outlook are appearing in sent items folder.
Sincerely Yours
Kranti Mohan | Head-Corporate Sales, Mkt. & Development |
GPS Address:30.725144N,76.765755E
Maya Hotels|SCO 325-328 | Himalaya Marg | Sector-35B | Chandigarh-160022, India.
T: +91(0172) 4688774x (D)/4688700x174 | M: +91 (0) 9915707030 | F: +91 (0172) 2660555
[email protected] |  http://www.mayahotels.in
http://www.facebook.com/mayahotel |  http://www.youtube.com/user/mayahotels
http://twitter.com/mayahotels  |  https://www.orkut.co.in/Main#Community?cmm=101119348

External hard drive not showing up on AFP server

hi
i have successfully connected a couple of times to a firewire external hard drive connected to my dad's iMac over the internet (AFP server) for the purpose of backing up some files, but now it doesn't show up at all as a volume when i connect to his iMac through finder/go/connect to server. i don't believe that any settings were changed, so don't understand why it isn't showing up. currently when i get info on the drive 'shared folder' is checked, everyone has permission to read and write and 'ignore ownership on this volume' is checked, and file sharing is enabled in system preferences/sharing.
does anyone have any ideas of what i can do to get the drive to show up again?
thanks
nick

OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

Hard drives not showing up in BIOS of UCS C22M3 Server

Hi there,
I am wondering if someone can help me work out why my internal hard drives aren't showing up in the BIOS. When I enable the RAID controller and set up an array they are detected and placed online, but if I remove the RAID array they do not show up in the BIOS as a device from which I can boot from. I am using the onboard SCU as the RAID controller and it makes no difference with this enabled or not, the internal hard drives do not show up in the BIOS. I have tried many different combinations but are unable to ever see the drives listed in the BIOS. Initially when I first received the server I was sure this was the case but have since formatted the drives. I have also tried resetting the BIOS settings to default.
I would be most grateful if someone could help me as I have been working on this problem for a long time with no success.
Thanks in advance.
Tim
This image shows the drives with the array active, if I remove the array the drives still show up on this screen but not in BIOS.

Hey Tim, welcome to the communy!
I don't think you are even supposed to see the individual disks as a boot option. For all I know UCS is not intendeed to use its disks as JBOD (we'll see if that changes with new technologies like Hadoop) reason why you dont see the disks; you can see the RAID controller as a boot option if you enable it to control the disks.
I made the test in a C220 with a PCIe RAID controller (I don't have a C22 but it is very similar) and when I went to BIOS I didn't see the disks listed either, then I rebooted and pressed F6 and still the disks are not showing up, only the PCIe RAID controller showed up as a boot option:
Last 2 things:
1-Why do you want to see the individual disks as a boot option?
2-Have you check another C22 or any other model to see if the behavior is different? If this does not happen on other servers (which I think it is NOT going to be the case) open a TAC case for further investigation.
Rate ALL helpful answers.
-Kenny

Finder Strange behaviour: folder and file icons not showing, then they disa

Yesterday I was trying to install the postgresql package from (http://web.mac.com/dru_satori/iWeb/PostgreSQLforMac/Welcome.html). Actually I had an older version of their package, i uninstalled it, tried installing the new package, but kept receiving errors that the installation was not correct.
Now the point of this question, as I was doing the above, i started to notice that some files (either on my desktop or in a folder window) are not showing the icon. Only the label is showing! when I click on such a file, the file disappear (i mean even the label is gone).
I have completed permission repairs, disk repairs. I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory. I have also re-lunched the finder using the force quit window. I have also trashed the com.apple.finder.plist and logged out and then logged in again. I have just noticed that (pages) is asking for the serial number! I have this program installed months ago! It seems that some other files are also getting damaged!
Is there something that I am missing? Is this a bug? is there any solution, because this is very annoying and it might indicate a bigger problem that I am not aware of.
thank you for your help
PowerMac G5 Dual Mac OS X (10.4.4) 4.5 GB RAM

I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory.
Good first troubleshooting step!
Now log back into your normal user account: (In your case I would try preferences first)
1. Navigate to ~(yourhome/library/fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly;
• Navigate to ~(yourhome/library/preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
   • Navigate to yourhome/library.
   • Get Info (Command - i) on folders for apps you are having problems with.
   • Open the "Ownership & permissions" disclosure triangle.
   • Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
   • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
If the issue persists navigate to yourhome/library/caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
-mj
[email protected]

External hard drive not showing on server

hello ive just hooked my macbook up to a server i can see everything and i can play all my movies and music through my tv. but there is 1 problem i have an external hard drive and this cant be seen by the server as this is where most of my files are it is sort of essential to the setup. any tips would be greatly appreciated.
Message was edited by: mingat

Try SharePoints on the MacBook to make its external drive available.
<http://www.hornware.com/sharepoints/>

Time Capsule Hard Drive not showing up in Windows machine

I have Time Capsule showing up perfectly on my two Macooks, but my windows laptop from work cannot see the Time Capsule hard drive at all. I have successfully logged onto Time Capsule as a wireless network and am able to use the Internet fine, but I still can't see time capsule anywhere in Windows Explorer or my network places?
I turned off Windows firewall and re-install Bonjour for Windows, but that didn't help either. I thought Time Capsule was just supposed to show up in my system after I access the network? Am I missing something?
Thanks in advance for any help.

I set up my TC and installed Airport Utility on two PCs running Windows XP. On the first machine, the hard disk didn't show up, but on the second PC it showed up automatically mapped to Z:\. To fix this problem, I just opened the Airport Utility on the problem PC and looked up the IP address of the TC. I typed in the URL based on the IP address and it came up fine as \\10.0.0.1 showing another folder called 'Time Capsule'. You can easily map a drive to this folder by going to the start menu, right-click on My Computer, and select map network drive.

External Hard Drive NOT Showing Up on Desktop or in Finder Window

I have a PowerBook G4 and am connecting a Western Digital portable hard drive via USB (high-speed). It worked it the past, but it is no longer showing up in finder windows or on the desktop, and as such, I cannot access the files stored on it. When I open up the system profiler, it shows up as being connected in the USB Device Tree, but I don't know how to proceed... PLEASE help, I am a photographer and I have tons of images stored here, not to mention my iTunes library!!!

Have you tried 'mounting' the drive from within Disk Utility (found in 'Utilities' within the Applications folder)?
Do you have any other USB devices connected when you connect the drive? If so try ejecting all other USB devices before connecting the drive. Have you also tried using a different USB cable?
Does the drive require an external power supply? If so, have you checked the power supply?
Have you noticed if there were any unusual noises or activity from the drive in recent days? If so try 'Repair Disk' from Disk Utility. I don't want to scare you but there is always a possibility that the drive is either failing or has failed - hopefully that will not be the case.
Do you have DiskWarrior? If so try checking the drive with DW.
15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.7) Cube, 2xTAMs, iPod 4G & nano 2G, iPs, AEBS, AX

Windows based WD external hard drive not showing up in Disk Utility to reformat to Mac... how can I erase the drive

We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format. Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X? Or how can I get this drive to show up in Disk Utility? Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive. And we are ok with losing all the current data on the drive.

Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk?

G4 Main Hard Drive not showing up on desktop or in folder side list

I am able to access my hard drive, it boots up in to OSX from it just fine. However I am unable to see its icon on my desktop and can see no icon in the folder views. I have run disk utility numerous times and there is no problem ever detected. It is not causing any problems with my computer, it is just a hassle to get access to files on it. An external 500GB drive mounts and shows up on my desktop. Any help?

If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.
Message was edited by: Limnos

MacBook Pro dock and hard drive wont show up

A couple days ago on my 17" 2011 MacBook Pro, the system dock and internal hard drive icon disappeared. I've restarted a few times with no luck. I unhooked all external drives and restarted but still no luck. The baffling part is that it appears to have started up just fine - my personal wallpaper is still there on both monitors, items on the desktop are still there and I can navigate the Finder menus at the top. BUT I cannot access the internal hard drive or any external hard drives. They dont even appear to be mounting. In addition to that, the dock never shows up either.
No idea how to fix this thing or even troubleshoot it. And I really really dont want to be forced into spending time and money at the local "genius" bar.
All help is much appreciated.
thanks

Hello NC_PV,
Thank you for contacting Apple Support Communities.
It sounds like you have a couple of preferences that got switched.
For your Dock, take a look at this article:
Mac OS X: Additional features of the Dock
http://support.apple.com/kb/HT2307
Command-Option-D
Hide or Show the Dock. This is equivalent of choosing Dock from the Apple menu and then Turn Hiding
On or Turn Hiding Off from the submenu.
For the HD icon, look here:
Mac OS X: Blank disc may not appear in the Finder
http://support.apple.com/kb/TS3105
To show the HD on the desktop, Click on the Desktop and then from the menu bar at the top, click on Finder>Preferences>General and then select "Hard disks" under "Show these items on the desktop:"
Regards,
Jeff D.

New WD Caviar Hard Drive not showing up and S.M.A.R.T. is "not supported"

Hi, hoping someone can help me out with this fairly quickly.
I am using a Mac G5, here's the specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f2
I bought this computer second hand. It has a 'Macintosh HD' drive and a 'Movie Drive'. The 'Movie Drive' keeps disappearing (with 70 Gigs on it) and the other 'HD' drive only has 7 Gigs left on it (from 150Gigs).
I just bought a new hard drive based on advice from this forum. I bought a WD Caviar SE16 500GB SATA2 16MB. I was told it would be compatible with this computer. This is the website and drive that I bought:
http://www.komplett.ie/k/ki.aspx?sku=331024
I took out the old Movie Drive that kept on disappearing on me (and which I had nothing on anyway) and replaced that with the new 500GB hard drive (in bay 'B'). With the intention of making this my main drive that everything would run on.
I started the computer and it didn't show up on the desktop.
I shut the computer down and inserted Disk Warrior 3. Held down 'C' on the keyboard as the computer started up. When Disk Warrior came up, I didn't have the option of rebuilding anything except the drive I had previously called 'Macintosh HD' (in bay 'A' inside the G5).
So I turned the computer off and started it again. I went into 'About this Mac', 'More info', and clicked on Serial-ATA. The TWO drives are there.
The old drive I already had in the G5 - 'Macintosh HD' - is saying:
ST3160023AS:
Capacity: 149.05 GB
Model: ST3160023AS
Revision: 3.05
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 149.05 GB
Available: 7.4 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s9
Mount Point: /
The new drive is reading:
WDC WD5000AAKS-00A7B0:
Capacity: 465.76 GB
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
I don't know what SMART status is, but I could see that one is verified and the other is unsupported. How do I make sure the new drive is supported?
Thanks anyone!

Hi! The problem is that the drive cannot show up on the desktop until it is formatted. Read THIS on formatting. Once formatted the S.M.A.R.T. status will probably work. Tom

New hard drive not showing up in select a destination window of install

I just installed a 500G hard drive and went to install OS X leopard and the new drive isn't showing up in the destination pane. Do I have to format it first? It shows up under disc utilities. If I have to format it what format should I use there are a few listed (journaled, etc)

I have had a new hard drive installed. When I go to Disk Utilities and click on Info it shows that it the following:
Connection Bus: Serial ATA
Connection ID: Device 0
Partion Type: ApplePartionScheme
Total Capcity: 298.1 GB
Format: Mac OS Extended (journaled)
However, the drive does not show up to install the OS to. Where do I go from here?
Sunny

I moved iTunes 10.5 media folder and hard drive is now empty?

I moved iTunes 10.5 media folder to my D Drive which is larger and after importing my library and everything, iTunes worked fine. Except my D drive is now completely empty including files, music and pictures. How can I get my files back?

Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE.

Windows Server 2012r2 Essentials - Dashboard - Server Folder and Hard Drives Not Showing..

Similar Messages

Maybe you are looking for