Windows Update for windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics

Hi there, a couple of times the windows update on my windows 7  won't update the Intel Corporation - Display - Intel (R) HD Graphics.
What could be the problem?
How can this be solved?

Hello palette35,
Welcome to the community.
You’re having problems with windows not updating the graphics.
It could be security setting blocking the update
You can go to HP.com and download the driver directly.
Here is a link to the site. You’ll need your product number.
Let me know if this helps.

Similar Messages

  • X230 keeps rebooting after update of Intel(R) HD Graphics Driver Version 8.15.10.2696

    Hi,
    i just got a new x230. I finished the first time setup and ran the thinkvantage system update utility. It listed the Intel(R) HD Graphics Driver Version 8.15.10.2696 as an optional update, so i ran it.
    After it completes and restarts, the system will just cold boot once it gets to the user login screen. Is this a wrong driver for the x230?
    thanks.

    Hello x230user,
    It is the correct driver for the X230 and Windows 7 but it might have downloaded the wrong bit OS for your computer.
    Are you able to uninstall the driver?  If possible please boot into safe mode and uninstall the graphics driver.
    Please let me know what OS you are using and I will post the correct links.  Is it a 33 bit or 64 bit OS? 
    Hope this helps,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • Problem arised after updated the intel wireless lan

    Hello, everyong
    My laptop is T510. I just updated the intel wireless lan to the version of 15.02.0000.1258. After the updates, my wireless router was down when the laptop started. Initially it can connect to the router for a few seconds, then the router was down with all the lights going off except the power light. Once I restart the router, everything goes fine, my laptop is able to connect to the router without any problems. So I have to restart the router everytime when I start my laptop. Please help me. How to fix this problem?

    Why do you have to restart the router.
    Have you checked the computer WiFi profile? Why or what is not allowing the connection.
    You could delete the computer profile in Access or whatever you're using and discover, reconnect to it again as if its the first time. It may resolve the issue which is unknown.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • What is the max resolution for external monitors from the intel hd 4000 graphics driver

    What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

    OK so after doing much research... this seems to be the best workflow.
    Bring HDV in to FCP as ProRes 422.
    Edit show... add bells and whistles, etc.
    Export movie as ProRes 422.
    Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
    The client will then be able to play a movie encoded as proRes 422 and all will be happy.
    As a back up a high resolution h264 file can't hurt.
    Thanks for everyones input. We got there in the end.

  • Command quit will close the iTunes window but won't quit the iTunes app

    iTunes 12.1.0.50
    Command quit will close the iTunes library window... but won't quit the iTunes app properly.
    The iTunes icon in the dock still says the app is live... click the icon in the dock and the library window pops up again.
    On the second try the app will always close properly.

    I had the same problem: after updating to iTunes 9.1 (no errors) I just couldn't launch it. In Task Manager I saw that the iTunes process was running but it never really opened.
    After nights of frustration of scanning the net for solutions I finally managed to get iTunes to run again.
    1) Firstly I deleted the new iTunes 9.1 and all programmes associated with it according to the directions given here: http://support.apple.com/kb/ht1923
    It also mentions you should remove the Bonjour service but I could never make that work (no privileges or something like that).
    2) After that I reinstalled a previous version of iTunes. In this case 9.0.3.15. I got the download here: http://www.oldapps.com/itunes.php
    3) Then I disabled the Bonjour service with the MSCONFIG method mentioned at http://support.apple.com/kb/HT2292?viewlocale=en_US
    There they state that you should check which service clashes with Windows by trying to disable one service at a time. I found out pretty quickly that it was just the Bonjour service that caused the problems. All other services could run normally.
    After the reboot iTunes finally started up again and I was able to restore my library.
    Only thing is that I can not use the Remote App on my iPod Touch. That apparently required the use of Bonjour.
    I hope this method helps for some of you!
    Cheers,
    Bart

  • Windows 7 won't install on intel imac

    I'm having trouble installing windows 7 ultimate (64 bit) on my imac. it's the 20 inch model from early 2007 (EMC 2133) if that helps.
    It seems that when I try to install the windows 7 OS on my new partition the screen goes black and prompts the message "select CD-ROM boot type" and above that are options 1 and 2, both blank. Also at this point the keyboard does nothing; all I can do is restart the computer.
    When I start up the computer and hold the option key I can see that computer recognizes the disk as "Windows", so I know the disk is fine, but I can't use it to install windows 7.
    Does anyone have any ideas?

    I was having trouble myself with my iMac regarding a black screen and a blinking cursor after installation where the iMac would just stay idle. Below are solutions for all iMacs that have a problem with their graphics cards (ATI & NVIDIA).
    Some people complained that they can't find the "repair your computer" from windows DVD. In all cases repeat steps below:
    *Solution 1:*
    If you have a secondary monitor, connect the monitor to the computer before you install Windows 7. Then, you will be able to complete the setup process. After Windows 7 is installed, you can install an updated driver that corrects the eDP issue through Windows Update, Boot-camp or Snow Leopard DVD.
    *Solution 2*
    When doing the repair windows step, it didn't work asking to provide a repair disk or something. I then clicked install driver, browsed to the C:\Windows\System32\Drivers folder and then renamed the ati*.sys file (only one file!) to ati*.renamed (NVLDDMKM.SYS or ATIKMDAG.SYS depending on your iMac)
    Once installed, pop in the Snow Leopard OS DVD and run setup to get all the drivers working.
    This can also be done with an NTFS plug-in (Tuxera, NTFS-3G, Paragon, MacFuse, etc.) that will allow you to see the files on BOOTCAMP on OS X. Follow the same path and rename the file.
    The solution _+*Boot Camp: iMac (27-inch, Late 2009) displays a black screen during installation of Windows 7 using Boot Camp*+_ (http://support.apple.com/kb/TS3173) didn't work for me...but!!!
    Drag "Drivers" and "AutoUnattend.xml" from the iMacLate_2009_Win7Drivers folder, which was expanded in step 4, to the USB or SD card device's icon to copy the files to it. Do not copy them to any subfolders. (Normal USB or SD, no partition or Master Boot)
    From the Windows 7 installation DVD, start the computer that has the AMD Radeon GPU that uses eDP (or NVIDIA). Immediately connect the USB flash drive after the computer starts from DVD. Follow the instructions to complete the installation process. When the system restarts for the first time, disconnect the USB flash drive.
    If this still doesn't work for you, there a more..:)
    *Solution 3:*
    If you applied solution 2 and you still have problems, try the steps below.
    Solution 2 will make the Windows 7 DVD have the option "Repair your computer" for those who can't see it.
    Repair startup issues
    1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
    5. Click Repair your computer.
    6. Click the operating system that you want to repair, and then click Next.
    7.In the System Recovery Options dialog box, click Command Prompt.
    Type (these commands are safe - more information)
    Code: Bootrec.exe /FixMbr
    Code: Bootrec.exe /FixBoot
    Code: Bootrec.exe /RebuildBcd
    *Press ENTER after each command.*
    *Restart your computer.*
    That should do the trick! However if you still can't start Windows, then follow step 1 to 6 again and type these commands.
    This has been tested on iMacs with ATI and NVIDIA cards. I hope this helps everyone as it I know how frustrating this process can get!!! Once again, this is a complete guide for most iMacs that support Boot-Camp. (32-bit and 64-bit)
    Good Luck everyone and please let me know if it worked for you.
    George

  • WINDOWS XP2 WON'T LOAD - THE DREADED 39 MINUTES TO INSTALL THEN SHUTDOWN

    I have within the last month purchased 6 identical 20" IMacs for the office all with Tiger OS. Five of them loaded Windows without any problems, but the sixth machine goes through the setup program, then reboots and shows a screen that there are 39 minutes left to install Windows, then it shuts down. I have uninstalled the Windows partition, reinstalled it choosing a different size (but always in NTFS format), reinstalled the operating system, tried a different Windows installation disk, copied the installation disk using the IMac, but still the problem persists. If I remove the CD Windows tells me that it is searching for the ASMS file. I have now just installed Leopard in the hope that it would resolve the issue, but it has not, the problem is still the same. I have seen mention on the Discussion Forum of using MacFuse and NTFS-3g to solve the problem, but my computing skills are not advanced enough to be able to implement these. Can anyone give me any further advice?

    I do'nt know whether this help you but I recently installed a new drive in a friend's system.  I primed the drive using seagate's disk wizard; I remember when it had finished preparing drive it said do not insert O/S CD or floppy, wait for seagate logo on screen.  I think I must have ignored it because as soon as I got press any key to boot from CD I did and started lo load windows.  It copied files over to disc fine when it booted from hard drive to continue with installation I got the message you referred to "<root system>/system32/hal.dll is missing or corrupt."
    After several attempts it dawned on me what I had done, so I allowed the seagate logo to load, then it prompted me to boot from floppy or CD.  I chose CD and commenced installation of XP, which was flawless after that.
    Hope this helps.  If not, someone else might find it useful.
    Good luck Dave.

  • Thunderbird asks for password but won't accept the right one for email account

    Just installet Thunderbird on my Mac and I know my password but TB is asking for it every time I start the program and I retype it but it won't accept it over and over again. I use iCloud and all is right configured by the auto installation

    ...or just buy the products you are using!
    I was not asked for my serial after updating.
    But beeing friendly:
    There is one chance, that you will be asked for your serial number.
    When you got a new PPC and backuped your entire harddrive from
    another PPC (the old one) then you will be asked for your serial
    number, because your "Ethernet MAC Address" changed!
    Happy Holidays,
    CMI

  • Problems when updating the Intel INF file

    I have the MSI 865PE Neo2-FIS2R seems every time i go through with live update and try to load the INF driver it gets started into setup and once it gets to 10% the system reboots...after several attempts to load this driver, the third time it returned an error on reboot that says windows file is corrupt or missing...Oh yeah format c: once again...maybe i should not attempt to update this driver anymore

    You really shouldn't. If you read the release information, it says only for Intel Chipsets 915/925.....

  • How can I update the 'Top Sites' display on Safari on my MacBook Pro?

    Ok, so, up until fairly recently (around 2 weeks) when I opened Safari my topsites would be displayed as nine 'thumbnails'. And they used to show the current site, so if I had CNN, it would show the top stories of the day, yet now it has stopped and hasn't updated for weeks, so is showing old news, until I click it. Also, for NBA.com, it shows an old picture, until I click and open the site. I know this is a very trivial thing, yet it's annoying. So basically, how can I add a new tab and see the Top Sites' thumbnails updated? Thanks in advance.

    Hi.
    now it has stopped and hasn't updated for weeks,
    The TopSites.plist file may be corrupted. There's an easy fix.
    Quit Safari.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    ~/Library/Safari
    Click Go
    Move the TopSites.plist file from the Safari folder to the Trash.
    Relaunch Safari. See if that made a difference.
    How to manage Safari's Top Sites | Macworld

  • HT3823 The movie menu for iTunes extra won't play the extra videos.

    I dl'ed a movie with iTunes extra videos. The base movie menu has a selection for EXTRAS and when I click on that, the screen goes to another background image complete with titles for the extra videos. When I mouse over the titles, they change color, but when I click on them, nothing happens. This is true of those that are pointing to videos. The one that points to a photo gallery does work and all the features on that page work as expected. So I am assuming that there is something amiss in the set up. Either the dl of the extra videos (which, according to iTunes did complete successfully) got disassociated with the main program, or the controlling page code (which is not accessable to the user) is not functioning as it was planned. Either way, is there any workaround that will give me proper operation of all the features I paid for?

    Hey there storytellerstudios,
    I see that you are having an issue with some purchased movie extras from iTunes on your Apple TV.  I would like to suggest that you use the following link to help you report an issue with these purchases to iTunes:
    Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
    http://support.apple.com/en-us/HT204084
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I just tried to download itunes for win7, download not happening eventhough the thankyou webpage displayed?

    Hai
      I've tried to download itunes 11.2 (64bit) for Windows7. I'd given my id and clicked download. But finally no download is initialising eventhough the thankyou webpage is displayed. I hope the issue will be cleared  asap.
    Regards
    Balu

    See the further information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    tt2

  • TS3714 Every time the month advances, my calendar for 2 months ago clears. The app only displays 2 months of events? How can I prevent my programing from being deleted?

    I don't think the recurring exchange calenddar events deleted fixes my issue. I have no program on my windows computer either to back up my calendar to and the icloud just suggests I download outlook 2007 (pricey). I don't want to lose any more events in previous months! someone please help me

    Go to Settings>Mail,Contacts,Calendars and scroll down to the Calendars section, tap Sync and set this to a longer time period.

  • Why won't all the array elements display?

    Hello,
    I am trying to learn about manipulating arrays.  The example finder includes this one," build array_forum.vi", which shows the two modes, concatenate and append, which I can understand, HOWEVER, I cannot figure out how they built this vi.  For example, I can find the Build Array function, but, I cannot understand how they created the "array of numeric data 1"  "array of numeric data 2"...etc, and I cannot find the functions on the palettes that result in the display "build array concatenate inputs".  Where are these blue functions????
    Where are these functions found on the palette, and how does one construct them like this?
    The other vi shown here, "for loop array_forum.vi" is my attempt to duplicate it, but, it does not show all the elements of the array; instead it displays only ONE element, the last element of the array.  How do I display all the elements of the array I am trying to create using the FOR LOOP?  Am I doing something wrong with the FOR LOOP?
    Thanks,
    dave
    Solved!
    Go to Solution.
    Attachments:
    Build Array_forum.vi ‏12 KB
    for loop array_forum.vi ‏7 KB

    Hello Tim and Nilquist,
    Thanks for your help.  Let me re-state my question.  I have studied the Labview basics, and I understand about REPRESENTATION, data types etc., but, take a look at the attached vi.  In it, I have added an indicator, and the indicator I have added is called ARRAY by default, and it is the shape of a large box.  The original indicators in the original example are small boxes are labelled I-32.  Where did the original indicators come from?  Is my indicator identical to the original ones? I am using LV2011 basic.
    Thanks,
    DAve
    Attachments:
    Build Array_forum_2.vi ‏12 KB

  • Windows 10 - Blue Screen Error - Intel (R) HD Graphics Family - VIDEO_DXGKRNL_FATAL_ERROR

    Hi,I have done upgrading Windows 10 from 8.1 Then at Device Manager, try updated the Intel (R) HD Graphics Family - Display Adapters - but later this updated lead to Blue Screen Error - Blue Screen Error -  VIDEO_DXGKRNL_FATAL_ERROR Anyone have solution for this? My laptop specification:HP ENVY TS 14 SleekbookMicroprocessor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHzSystems Memory: 8GB Micron Technology 1600MHzGraphic Device 1: NVIDIA GeForce GT 740M   Graphic Device 2: Intel(R) HD Graphics Family  RegardsKIM 

    Remove all video drivers including your NVIDIA. Disconnect from internet.Get the appropriet driver for your Intel HD from here: https://downloadcenter.intel.com/ Install it and restart, then try installing the NVIDIA one. If you face any problem, it's with the NVIDIA driver.

Maybe you are looking for