Windows updates failed with error code 9c48

i have a WSUS sevrer and servers that have windows server 2008 r2 , many of them failed with the attached error , the update that caused this is Internet Explorer 11 for Windows Server 2008 R2 for x64-based Systems , and after i checked the
internet explorer its already have IE11 , i tried to do the following troubleshooting with no luck :
1- sfc /scannow : no errors found
2- wuauclt /detectnow
wuauclt /reportnow
3- stopped the windows update service and cleared the windows updates files and started it again with the same problem
any advice for this please

Hi Ghaith,
Please remove the IE11 first, then try to install this update.
Also, we may try to install the update manually, to download the update file, please click the link below:
http://catalog.update.microsoft.com/v7/site/Home.aspx
If issue persists, please disconnect the internet, then install the update again.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Windows 8 Windows Update fails with error 80244FFF

Windows 8 Windows Update fails with error 80244FFF

Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Today's update failed with error code U44M1P7

I received Adobe Application Updates today which said they are Adobe CSXS Infrastructure 4 updates and on installing them I received the following message:
Adobe CSXS Infrastructure 4
Installation failed. Error Code: U44M1P7
How to I fix this?

Cyndee M wrote:
Might be another problem. Now when I open CC to check for updates, it shows as my only installed Apops are Extension Manager CC and InDesign CC when in fact I ahve many other CC apps installed (Photoshop, Illustrator, Acrobat, etc.) -- they all open and seem to work okay; why aren't they listed in CC? Now I'm concerned that I won't get updates for them through CC.
Any thoughts?
I found this: http://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html and tried it, but the CC desktop apps panel still only shows Extension Manager and InDesign as installed.

Labview 2009 install on windows 7 fails with error code 1935

Hello all,
I have problems installing LV9 on my windows7 machine.
It always ends with:
Any ideas would be welcome.
Thanks
Albert

Since it is not simple to reinstall only .net framework on W7 (it is part of the operating system),
I checked the .net framework with the .NET FRAMEWORK VERIFICATION TOOL
( http://blogs.msdn.com/astebner/pages/8999004.aspx.)
Verification succeeded for .net 2.0,3.0 and 3.5.
Since there are more problems on this pc. (1:windows update problems with strange errorcodes, 2:unable to turn windows features on/of)
i decided to rerun the W7 setup.
i selected the upgrade option , assuming this would update corrupted files, and it did.
After that LV9 installed without problems.
Albert

Creative Cloud update fails with error code 50 Windows 8.1

what is error code 50?

Try to end all Adobe background processes and then update it
if not working then try
Error "Failed to Install" Creative Cloud Desktop application

Attempting to install creative cloud update. fails with error code 87. Where do I find an unfinished install?

I have received the error code 87 when attempting to update Creative Cloud. I had previously received an update for Acrobat Pro (not the CC version), and the install failed. Now I cannot install any Adobe product. How do I resolve this issue? Rather important that there is not a long delay.

If you are on windows computer, Open Task manager by pressing Ctrl + Shift + Esc keys
Locate and end all Adobe related processes, like Creative Cloud, Core sync, AAM update notifier, Acrobat updater, AdobeArm, Acrotray, Adobe installer.
Then try

Windows update fails with error 0x800F0922 for KB2961072 on Windows 8.1 desktop

I just tried to install updates on my Dell desktop tower running Windows 8.1 Pro. The first time it said that updates did not succeed and that it had to roll them back. I started using computer and now that same update notification showed up again.
I tried installing it once more and got the same story -- it rolled them back. So I'm afraid I'm about to go into a deadloop with Microsoft here.
On the side note let me say that I am not a fan of stopping my work to reboot computer and loose 10-15 min on this foolishness, so if there's a way to make these go away, I'd follow it.
When I pull up an update window I get these:
As for "security update for internet explorer", if that's the hold-up, I'd gladly pick the one that says, "Remove internet explorer 11 FOREVER" because I never use it and I don't know why I even have it?
Anyway, when the update fails and gets rolled back after a reboot here's what I see in the event log:

Hi,
to solve this issue please follow the instructions given in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03653226#N421
you've dell but this will solve your issue. or let us know if it isn't.
and if you're interested in knowing the why such issue occurred then read this link: http://www.infoworld.com/t/microsoft-windows/how-fix-problems-revoked-uefi-module-patches-kb-2920189-and-2962824-242533

PS 12.0.4 Update Fails with Error Code: U44M1P7 - any fix?

... on XP Pro SP3. Download completes, and installation reaches 100% before the above error appears. No other Adobe products running at the time. Updated attempted twice with same result.
Can anyone advise on what this rather meaningless error code is telling me and how to fix it?
Thanks
Richard

Hi Richard,
did You rename the Digimarc folder (Plugins/digimarc).
I did it to avoid to load this uneccessary plugin every time lauchning PS and that was the issue.
If not, have a look at the install logfile to figuer out the fault.
Eduardo

Update fail with error code U44M1I200

Win 8.1 system. Meanwhile, system next to it with Win 7 keeps humming along...tried update by individual app, no difference. Different days, different times...
Suggestions?

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Upgrade from 8 to 8.1 fails with error code 0x80070004

My repeated attempts to upgrade from Windows 8 to Windows 8.1 to prepare for the upgrade to Windows 10 fails with error code 0x80070004. Is anyone familiar with this problem and aware of a solution?

Several suggestions in the links below https://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-installation-error-0x80070004/970909c3-e03e-4cd6-ac09-97d3dea3cc62?auth=1 http://superuser.com/questions/666147/why-do-i-get-error-0x80070004-when-trying-to-update-to-windows-8-1-from-windows

CcmSetup failed with error code 0x80004005 - windows 8.1

using sccm 2012 r2, trying to push to a windows 8.1 client i get:
<![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
<![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
<![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4539">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
<![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4541">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
<![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
<![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
<![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:4584">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
any ideas why its failing?

Hi,
I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
instruction:
http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
http://blog.configmgrftw.com/configmgr-client-startup-script/
There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829

Hi All,
I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
1. Remove Symantec Endpoint Protection.
2. Run System Update Readiness Tool
3. Install MS SP 1 and fails.
Here is the log file.
https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
Thanks,

Hi,
I suggest you download the full package, and try to install it in Clean boot Mode:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-in/download/details.aspx?id=5842
If the issue still persists, please try following command to repair Windows:
SFC /scannow
You can also try the In-place upgrade to clean your Windows and install the update again:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Kate Li
TechNet Community Support

Windows updates failed with error code 9c48

Similar Messages

Maybe you are looking for