Windows user needs help connecting PS2

Please, I'm begging for some help. Here's my situation:
I'm a windows user (I know, I'm sorry). My set-up is this. I have a DSL modem connected to a D-LINK DI-614+ wireless router. I have a laptop running Windows XP. I bought an Airport Express for two reasons:
My office is where my wireless router is connected. My PS2 is in the living room, along with my stereo. I want be able to BOTH stream music from iTunes to my stereo, AND use the Airport Express to connect my PS2 to the internet. I hate having to run a 100 ft. ethernet cable across the house to get online.
How do I set this up?
Thanks,
Rob

Sorry... but you can't do this.
The ethernet port on the Airport Express is only active when the Airport Express is configured as a remote base station in a wireless distribution system (WDS). Problem is, your D-Link wireless router does not support Apple's implementation of a WDS. You must use your Airport Express in wireless client mode with your D-Link wireless router - a mode in which Airtunes may be streamed to the Airport Express, but the Airport Express ethernet port is inactive.
You will need to use different method of connecting your PS2 to your wireless network. Linksys, D-Link, and Netgear all sell "wireless game adapters" designed specifically for this purpose.

Similar Messages

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • Frustrated: Novice Illustrator User Needs HELP

    Frustrated: Novice Illustrator User Needs HELP
    Hello All
    I am a novice user of Illustrator [after you read my question it will probably be obvious] running Illustrator 14.0.0 (CS4) - on a MAC iMac running 10.4.11.  I am a small business owner and have to wear many hats and so I am forced to be my graphic designer by default - ha ha
    PROBLEM - If I make a box using the RECTANGLE TOOL... The box should have a point at each Corner and the Middle of the box, as well as, in the Middle of each Side, and middle of Top and Bottom for a total of 9 anchor points...  but it only has 5... missing the 4 anchor points in the Middle of each Side, and middle of Top and Bottom. It is the same on Text Boxes too..  I can NOT find a setting to change this.... More, when running Illustrator on my MAC Laptop, It has all 9 anchors on the box...   I looked at Preferences etc... and matched everything to be the same but the problem is not fixed?
    Any help would be greatly appreciated
    Thanks-
    13CrazyTrain

    Aw, c'mon James. Chill it a bit.
    Yeah. You continually throw around your little personal jibes, and then if someone calls your bluff, you think you can back out of it with the old "can't you take a joke?" comeback.
    In my previous work environment where everyone used Illie, Freehand was a word to be used cautiously – a bit like Macbeth in the theatre.
    Well, I didn't work in your previous environment. And FreeHand specifically had nothing to do with this thread until you brought it up. Seems to me it's you who has a FreeHand chip on his shoulder.
    I thought you knew my way of expressing myself better...
    What, you think I keep a personality registry of regulars here or something? I'll tell you what I don't do: I don't engage in personal insults here. Yet your personal jibes are frequent enough for me to have grown weary of them.
    I think I was not dismissing bounding boxes as useless...
    Excuse me? "There's absolutely no need to use bounding boxes"?
    You are probably right that bounding boxes came with Illie 9.
    Probably before that. But I can personally recall that the current-selection bounding box was present in AI9. Unlike some, I try to avoid making claims that I can't immediately substantiate.
    I hopped straight from 6 to 9 and that was the first time I had seen them outside of Freewotever.
    I'm not familiar with "Freewotever." But if you're again trying to be funny, you are also again revealing your near complete unfamiliarity with it. FreeHand is not the program that continually cluttered the interface with bounding boxes. In fact, for many years that is exactly one of the distractions FreeHand users complained about re Illustrator.
    First off, FreeHand's interface doesn't display bounding boxes. It displays only bounding box handles (four dots) on non-basic constructs like clipping paths. (Somewehere around FH 9, it implemented the optional Transform Handles, but that's another thing.) In the cases of rectangles and ellipses, FreeHand doesn't display Bounding Boxes per se. Working in FreeHand has always provided more functionality with much less visual clutter (and tool glut) than Illustrator's defaults.
    The difference is that FreeHand has always provided proper live geometric shape primitives--something which Illustrator still doesn't provide, even though it's one of the most basic of all vector drawing interface expectations, being present in just about any vector drawing program on the planet--except Illustrator. That point of confusion is common among those who are experienced only with Illustrator's chronically outdated and archaic interface.
    Quite to the contrary, a rectangle drawn in a program that does provide basic live primitives doesn't need a bounding box to perform the bare-bones basic manipulation exemplified, because you can change the aspect ratio of it (and corner radius) anytime you want, regardless of its rotation. You can do this not only in FreeHand, but Canvas, Inkscape, Xara Designer, and even in just about any basic drawing module of just about any "works" or "office" bundle. It's just Illustrator that still fails to provide live shape primitives, and therefore needs a rotated bounding box to provide a very limited subset of such common functionality. You draw a rectangle (or any other geometric primitive) in Illustrator, and all you get is a dumb path. So Illustrator actually needs bounding boxes more than other programs, because of its anemic core funciton set and its hideous user interface.
    But of course, someone who is familiar only with Illustrator wouldn't know that. Which is fine...so long as they don't spew derision at programs they know next to nothing about (and users of such programs).
    ...bearing in mind that I have been at this job since the days of Rotring pens with nosebleeds.
    So? I was using Rapidographs and constructing compound rotation in isometric on the board for about a decade before I came to prefer Staedtler pens because I found them less prone to clog. What does that have to do with anything?
    Obviously newcomers should be encouraged to use new features, but preferably not before they have grasped the basics thoroughly. How basic bounding boxes are is perhaps a moot point.
    Nonsense. Other self-proclaimed "experts" in Illustrator would no doubt argue that bounding boxes were added for the benefit of "beginners." Again, this is not a "new feature." And yes, it is bare-bones basic; just implemented in a half-baked manner in Illustrator.
    As for step 3 you are right, but if you turn off the preview you can use the pixels on the paths for alignment,
    Egads. That's really grasping at straws, Steve.
    ...Or use bounding boxes.
    Or use bounding boxes.
    JET

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • New Mac user needs help installing windows.

    Hey Everyone,
    I just bought a macbook and I want to put Windows on it.
    My question is, how do I do that with bootcamp? Is that btw the best way to do it? And where can I get a cd with Windows on it, do I need to buy it somewhere?
    Or is the cd-rom included with old pc's??
    Hope someone can help me.

    Why and what do you use Windows for might help.
    Yes you need to buy Windows (XP SP2 or later, Vista).
    Newegg, Amazon etc.
    You can run Windows natively, or in a virtual environment inside OS X with Parallels or other programs.

  • Need help connecting to Oracle to create database

    Am student taking DBA course; have altered pfile so that path shows where createdb is located. Cannot connect to Oracle; keep getting message "insufficient privileges." Createdb file amended per book to "REMOTE_LOGIN_PASWORDFILE=exclusive" and still can't connect. Can I grant connect privileges to internal/oracle? Tried several times to create database and am now using new database name to try again, but when I get to svrmgrl and type in "connect internal" and give password "oracle" as book says to do I get the "insufficient privileges" message again. Need help.

    Linda,
    when you use exclusive in remote_login_passwordfile is necessary make one file. Use the following instructions:
    orapw file=orapw<SID> password=<password> entries=<users>
    where
    file=name of password file (mandatory)
    password=password for SYS and INTERNAL (mandatory)
    entries=maximum number of distinct DBA and OPERs (opt)
    There are no spaces around the equal to (=) character.
    Find orapwd.exe by Windows Explorer
    Bye,
    DQC

  • Need help connecting a remote MySql database from Iphone

    Hi, i need to connect to a remote MySql DataBase in windows from IPhone but..... i'm a noob with Xcode and Objective-C.
    Can someone help me or explain me the way to do it plz?
    Message was edited by: Krovax87
    Message was edited by: Krovax87

    I do not think MCPKit will help you on the iPhone. It is just an Objective-C wrapper around the standard mysql libraries which are not available for the iPhone. Your best bet would be to post on the mysql forums and see if you can get any help.
    You can try extracting the mysql client library source code into a separate static library project, and see if you can get it to build for the iPhone.

  • Run Labview as different windows user (for database connectivity)

    I have to connect to a corporate remote MSSQL-Database on the network, using the database connectivity toolkit for LabVIEW.
    The db-authentification is realized checking the windows user (ads) who acceses the datebase (not a database user / password which is standard in the database vis)
    Therefore I have to run LabVIEW as the defined windows user, different than the logged in user on the pc.
    Is that possible to realize with LabVIEW?
    Other Windows-tools allow to define the windows user/password which "run" an application - how can I do that with LabVIEW?

    Hi Zav.  There is a windows command 'runas' which _may_ let you do what you want; I haven't
    tried what you need to do, but is has worked for other tasks for us.  Try 'runas /?' for the switches.
    You will have to build your LV program into an executable, then use runas to launch it.  Is there
    a reason you can't just login to Windows as the required user?
    If you can get your db admin to allow dbuser/password authentication that would be a much better
    way to go.
    Matt

  • Need Help, Connect iPod To iTunes,

    Cannot connect my 8G iPod Nano to iTunes to download songs need help please.
    Any help please, Thanks.

    Have you had a chance to look at either of these troubleshooting pages? They may be of some help:
    iTunes 7 for Windows doesn't recognize iPod
    iPod missing in My Computer and in iTunes

  • Data base problem-new user need help

    im new user and trying to insert data base to my page using
    "asp.net c",i get connetction to my data base but when i try to
    build a form ,and then preview him i get ,the following message
    Server Error in '/' Application.
    Parser Error
    Description: An error occurred during the parsing of a
    resource required to service this request. Please review the
    following specific parse error details and modify your source file
    appropriately.
    Parser Error Message: File or assembly name DreamweaverCtrls,
    or one of its dependencies, was not found.
    Source Error:
    Line 1: <%@ Page Language="C#" ContentType="text/html"
    ResponseEncoding="iso-8859-1" %>
    Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
    %>
    Line 3: <MM
    ataSet
    Line 4: id="DataSet1"
    Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
    Assembly Load Trace: The following information can be helpful
    to determine why the assembly 'DreamweaverCtrls' could not be
    loaded.
    === Pre-bind state information ===
    LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
    Culture=neutral, PublicKeyToken=836f606ede05d46a
    (Fully-specified)
    LOG: Appbase = file:///e:/inetpub/wwwroot
    LOG: Initial PrivatePath = bin
    Calling assembly : (Unknown).
    ===
    LOG: Publisher policy file is not found.
    LOG: No redirect found in host configuration file
    (E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
    LOG: Using machine configuration file from
    E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
    LOG: Post-policy reference: DreamweaverCtrls,
    Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET
    Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET
    Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
    Version Information: Microsoft .NET Framework
    Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
    I know its probably something stupid ,so u can lauph,but i
    realy cant fix it.
    need help
    tnx for advance

    anyone? please help

  • Need help connecting to ISP through DSL/router

    Hi
    I need help configuring my intel solaris8 box to get to the internet. I have dsl going into a linksys router. my windows machine have no problem using the DNS servers from pacbell. i also have DNS setup on my novell server, but the solaris8 box still can't resolve anything. I can ping everyone on my segement, I can connect to my novell web server netscape navigator but can't resolve it's name, i have to use it's ip address. I can remote logon. I lloked for a resolv.conf file but can't find one, help!!!!
    Danny

    Edit /etc/resolv.conf (it may not exist) with the following lines:
    domain your.domain.name
    nameserver your.primary.dns.ip
    nameserver your.secondary.dns.ip
    search your.domain.suffix
    The last line is optional, but please do substitute those values for the ones that you use.
    As far as a default route goes, just edit /etc/defaultrouter (may not exist) and put the ip of your default gw on a single line.
    Alex

Maybe you are looking for