Windows Vista No Disk Error

Greetings,
I have installed Oracle 10g Enterprise undee Windows Vista Home Edition using oracle proper installer for this OS. The installation went pretty well and so was the aftermath when I created a database and several schemas. A few days ago I have started getting a very strange and persistent error everytime Oracle's TNS and Listener are referred. The error comes fro Windows and states "Exception Processing Message 0xc0000013 Parameters 0x764F92A0 0x00000004 0x764F292A0 0x764F292A0" and the options I am prompted for are Cancell, Try Again and Continue. Whatever option I go to has to be hit over and over for about 7 times so that the message stops popping and I can continue. I say this error is reated to ORacle's TNS and Listener because when I try sqlplus /nolog I get no error, but if I enter the full connection string like slplus user/password@dbsid I get the error. The same error comes on TOAD when I first open it and it reads the TNSNAMES file to bring the TNS's within the file.
Past this error by cancellin, trying again and again or continuing, all DB functionalities are just fine, no alerts, nor critical errors... Pretty weird hmm? Does anyone have any suggestion on what the issue is and what can be done to fix it?
Appreciate all your inputs on this matter.
Thiago Santana

Actually there are no comments regarding Vista version under notes for 10.2.0.3.
If You look at certify matrix under
http://www.oracle.com/technology/support/metalink/index.html
and search by Platform, then under Vista and 10gR2 You will see following notes:
Oracle Database (EE, SE, PE and Client) are supported on these platforms:
Business edition
Enterprise Edition
Ultimate Edition
Home edition is not supported!
But what I can suggest.
Look into listner.log - are there any errors.
Try to restart listener from the command line
lsnrctl stop
lsnrctl start
Try to recreate listener service

Similar Messages

  • Windows Vista install disk for my Mac?

    I have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk.  Does anybody know where I can get a Windows Vista install disk?  Thanks

    No doubt if you Google for it you will find vendors. Check with amazon.com, too.

  • No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    The neighbor discovery on mac and PCs is based on broadcast.
    I think it's the same for yoru SQL application.
    Broadcast are blocked by default on the controller. You can enable "broadcast forwarding" in the controller menu

  • When i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • Missing BOOTMGR Windows Vista No Disk

    Hello,
    I need some help.  After doing a "Factory Recovery," my laptop won't boot to windows vista.  After booting, it won't finish the "Factory Recovery" process, and it ends with a black screen with the words "Missing BOOT MGR Crtl+Alt+Esc."
    The laptop(G60-125NR) didn't come with anything.  I HAVE NO DISK OF WINDOWS VISTA.  It was only already installed in the laptop.  
    Can anyone help me with this? 
    Here are the details.
    I tried pressing F11 or F10 - the factory recovery screen - and used both the hard drive partition and then the recovery disks I created before the factory recovery-thing.  Hard drive ended with error 1005 and using the disk I got error 1002.  Both telling me to contact HP.
    Purchased a Boot Disk and it got me to System Recovery Options.  There, I could not select on any operating system.  I don't even know which Drives to add.  Plus, as I was trying to see in the folderfs, nothing was comming up. So I just clicked on Next and tried the Startup Repair option.  After a while it said that Startup Repair cannot repair this computer automatically.  It still says MissingBootManager on the details.
    At the Windows Boot Manager screen,
    Windows Setup [EMS Enabled]
    But on the tools;
    File \boot\memtest.exe
    Status: oxcoooooof
    Info: The selected entry could not be loaded because the application is missing or corrupted.
    I hope you can help me.  Thank you.

    Actually there are no comments regarding Vista version under notes for 10.2.0.3.
    If You look at certify matrix under
    http://www.oracle.com/technology/support/metalink/index.html
    and search by Platform, then under Vista and 10gR2 You will see following notes:
    Oracle Database (EE, SE, PE and Client) are supported on these platforms:
    Business edition
    Enterprise Edition
    Ultimate Edition
    Home edition is not supported!
    But what I can suggest.
    Look into listner.log - are there any errors.
    Try to restart listener from the command line
    lsnrctl stop
    lsnrctl start
    Try to recreate listener service

  • Windows Vista reinstallation disks for my 7387 A11 whose hard drive died

    Thanks in advance for any help you can offer.  Just over three years ago I bought a Lenovo 3000 J Series, model 7387 A11.  Last weekend my hard drive began failing to the point that it wouldn't let the machine boot.  So I bought a new PC and hooked up the failing hard drive to it as a secondary drive.  With much coaxing and rebooting I managed to copy all the files on the main partition of the failing hard drive to my new PC's primary hard drive.  Yea!
    But now I've bought a new hard drive to replace the failed one in Lenovo machine, and am stuck at the stage of getting the machine to recognize the new hard drive, since it has no operating system.  
    I read on one of these threads that one option would be to call Lenovo and ask for reinstallation disks for the Windows Vista operating system.  So I called the phone number, but the message there says that since I'm out of warranty I should try to get help on the Lenovo website.  So here I am.
    Can you help me?
    Thanks,
    Erik-Chicago 

    Satellite A135-S4477
    After the reinstallation, it shows these 2 hard drives separately..
    As the spec above shows, that model has a single physical hard drive. What you are seeing are partitions in that drive. This Toshiba article explains what they are for.
       1.46GB partition and other small partition are for the System Recovery Options and the factory softw...
    I tried to use the Windows Disk Management menu (in he control panel) to combine them, but that failed. I then tried again using the command line Diskpart command, but it gave an error that it couldn't merge partitions from separate disks. So is there any way to combine them back into one volume..?
    Best to leave those partitions alone to function as designed.
    See the section Hard Drive Recovery Utilities, which begins on p. 55 of the User's Guide.
       Satellite A130/A135 Series User's Guide
    -Jerry

  • During Windows XP installation, 'Disk Error' shows.

    In many other forums and other user experiences as well as the Bootcamp guide written by apple themselves, at one stage of installing Windows XP, normally after selecting the partition in which to install windows, it asks whether to format and into which format. However this does not happen on my Mac. After selecting the partition that was separated using Bootcamp, it does not ask to format but goes on to verify and then copy data into the partition.
    A friend also said formatting is essential and the formatting option was included in the step-by-step procedures described by Apple, but this option was not present or shown in my installation. After the data was copied, it restarted the computer after completing the data copying and informing the user that the computer would be restarted. It then rebooted the same way as it did when I clicked 'Start Installation' on Bootcamp which restarted the computer and came to the start screen that displayed 'Press Space to boot from DVD' just as it did before. Pressing space opens another list where the first option is to press space to install Windows XP, other options show to boot something else and last option to reboot. If nothing is pressed, it jumps to another screen displaying the words 'Disk Error. Press Any key to restart' which happened every single time I tried to install windows and the only thing that I had realised was missing was the formatting of the partition that the Windows XP installation disk should have prompted which did not.
    I had also tried accessing 'Disk Utilities' in the Mac OS X and erasing everything in the Bootcamp partition and putting it in FAT format whilst the partition for windows remained under 32 GB. However all attempts resulted in the same 'Disk Error' and never completed the XP setup.
    Can someone please diagnose what problem this could be and suggest any possible solutions in order for me to successfully install my Windows XP Service Pack 2 on to my FAT32 format partition of 30GB. I believe it is related to the formatting issue.
    Thank you very much.
    Chris

    Hi Chris and welcome to Discussions,
    what exactly is the error message you get when you try the "Format C: /FS:FAT32" command ?
    Sadly it is indeed so that a whole batch of Windows XP CDs are 'missing' the reformat option. Don't know why that is so.
    frederic1943 has described the correct procedure in this thread http://discussions.apple.com/thread.jspa?threadID=2071417&tstart=105
    Have you waited long enough for the drivers to be loaded ?
    To Antonio: Reformating the BootCamp Windows partition through the WIndows installer is indeed a neccessity.
    When using NTFS as file system for WIndows (neccessary for Vista and Windows 7) it is a must since OSX cannot write to NTFS by default.
    With FAT32 also, since the BootCamp Assistant only does some sort of 'preformating'.
    http://support.apple.com/kb/TS1722
    Regards
    Stefan
    Without doing it

  • Windows Vista Ultimate and Error -42018

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

  • ITunes won't install on Windows Vista 64-bit : Error Message

    I got my dad an iPod Mini for Christmas. I've been trying to install iTunes onto his computer so that he can download music and all that stuff on his own. It is not downloading for me. Quicktime downloads, but I get an error for iTunes.
    "An error occurred during the installation of assembly "Microsoft.VC80.CRT, version="80.50727.4053", type="win32", publicKeyToken="1fc8b3b9a1e8e3b", process or Architecture="x86"."
    His system specs are as follows.
    Windows Vista Home Premium
    AMD Phenom 9150e Quad-Core Processor 1.80GHz
    4.00 GB RAM
    NVIDIA GeForce 6150SE nForce 430
    64-bit Operating System
    Can anyone tell me what I'm doing wrong or how to fix it. iTunes has never been installed on his computer before. I'd really like to get this up and running soon. Any help would be greatly appreciated. Thanks.

    80070424
    Accck. Have you checked to see if you've got a broken Windows Modules Installer, ral? See the following thread for troubleshooting advice for that possibility:
    http://discussions.apple.com/thread.jspa?messageID=10847979&#10847979
    Message was edited by: b noir

  • Windows vista installer script errors

    I have been unable to install certain pgms or windows vista updates because the installer gets a "script error". This occurred after IE v9 was automatically installed a year ago.  I am looking for advice on how to repair the Vista OS because all repair efforts listed on Microsoft troubleshooting steps on the error code have failed. Can anyone tell me how to repair corrupt jscript files or re-load the OS without use of a VISTA install CD. This is a THinkpad R61i and the OS was pre-installed by Lenovo.

    if you have the recovery partition you can use the thinkvantage button or F11 at startup to excess the recovery environment from there you can restore to factory or recover to a saved backup
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Envy 5640 - Windows Vista Driver Installation Error - Please Help

    Hi
    Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
    The printer is up and running and working perfectly on our iOS and OSX Mac devices.
    The PC can see and communicate with the Printer.
    But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
    <<
    Install Failed
    The software required for your printer could not be installed.
    For more information click the Details button below.
    DETAILS...
    The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
    >>
    Then when DETAILS... button pressed:
    <<
    Installation Error
    Key not valid for use is specified state.
    >>
    I haven't entered a key, nor a state? I'm in the UK.
    Any ideas?
    Thanks in advance
    Dave

    Hello there! Welcome to the forums @Stodgy70 
    I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
    After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
    Here is the direct link for you to download and install the printer on Windows Vista:
    HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
    Please let me know the results, have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Window Vista Ultimate Updates - Error 80071A91 and 490

    I can't update Windows Vista because of these errors, and I can't find any info on how to fix them other than buying registry software.  Will this help?  Any ideas?  I have a T61p w/ Windows Vista Ultimate.
    Thank you!

    Quicktime doesn't open either and sends same error message

  • 6.5 install on windows vista 64 bit error USR0057

    We can install v6.5 on a windows vista 32 bit, however, on a windows vista 64 bit we are getting the following error..."USR0057"
    Defalut installed under the x86 file location, how can we get BO to load on the non x86 file location (simple under program files)
    Thanks for the help!

    hi
    the point is that even if you get this somehow to work your customer will work with a version which is no longer supported in a an environment which was NEVER supported.Your customer must be aware of the risks that result from such a decision.
    I would recommend either to upgrade your BO version or to downgrade the windows clients.a solution maybe a terminal server installation of the bo client.
    sorry that i cannot provide you with a solution but you have to be aware of the risks you are facing.
    regards
    stratos

  • X-Fi Extreme Music || when installing drivers for windows vista 32 bits, error mess

    I get an error message when I install windows vista 32bits drivers for my X-Fi Extreme Music... it says, error while installing, can't find a compatible product on your system, verify if it has been corectly installed ... BUT INSTALLING I JUST WHAT I WANNA DO ! WTF?
    all other software for hardware management can see that my sound card is connected to my mother board, so i don't understand why the driver installer can't see it too and install the drivers ...
    Could someone give me a tip to help me to install my drivers please?
    i got windows vista 32bits build 6000 , X-Fi Extreme Music, 2048 RAM, Pentium4 3.6ghz 250 go hdd space ...
    I'm waiting for some cool answers, thanks ! ...

    You are wrong. The 2.3 are for extreme music, you are thinking about extreme audio. Creative have really made a blunder with these names, not strange many are having problems. Propably trying to install extreme audio drivers on extreme music, and the other way around!?
    Check that you have the right drivers, if you do. Try the trick where you unpack the driver exe file, so you get all the files from the installer on to a folder of youre choosing. Then use the "Creative Update Utility" popup to install/force the drivers to install. If you dont know what im talking about, search the forums, its been explained many times here.

  • Windows XP displays "Disk Error" message during initial setup

    I have gotten as far as choosing C:Partition3 <BOOTCAMP>[FAT32]. Windows setup then copies a bunch of files, initializes and then restarts and tells me to press any key which I do then I get a disk error and have to do a hard restart. I am never taken to the screen where I am to choose between NTFS and FAT so that I can format the partition.

    A SOLUTION TO "INSTALL XP PRO SP2 INTO BOOTCAMP WITH LEOPARD, BUT NO OPTION TO FORMAT PARTITION"
    After spending 14 hours trying to follow each and every leads in various discussion rooms, i was overjoyed to finally see the Windows logo on my screen.
    THANK YOU TALEZ !
    I followed carefully what he and Paul Thurrott's Supersite instructed. Below is Talez's advice:
    Check to see if there is a file named "winnt.sif" inside the I386 folder on the Windows XP CD.
    If there is follow these instructions to rebuild the Windows XP CD:
    http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
    Skip steps 2 and 3 (since you already have SP2 built in) and remove the "winnt.sif" file from the I386 folder before going on to step 4.
    If this was not working, my last option would be to reformat the whole Mac HD, install Windows, re-install Leopard and retrieving my data from Time Machine - although this is highly risky and not recommendable.

Maybe you are looking for

  • How to split video and extracted audio clip at same time?

    I imported 10 min of DV from my Sony HC96 camcorder to iMovie 6. I selected a video clip and split it using cmd-T but the extracted audio clip below it did not split. How can I split both the video and underlying audio clip so I can drag the edge of

  • Delivary Date in PR/PO from Sales Order

    Dear All, I am linking my WBS to SD line item in Order to get the revenue. I am attaching material to an internal activity in above WBS by attaching FG item which same as that of sales Order line item and then exploding Bill of Material for same. Dur

  • Hard drive crash, need to get ipod songs back onto itunes

    i'm a bit computer illiterate and need step by step instructions for how to connect my ipod without losing everything. if you've done this before and you can help, it would be greatly appreciated. i downloaded senuti but i don't know what to do from

  • Setting Isolation Level In A UserTransaction

    We are having a problem where a class creates a UserTransaction from the InitialContext, but does not see any database changes made by other EJBs even though they have been committed. This "seems" like an isolation issue. What is the default isolatio

  • Capturing value in after insert or update row level trigger

    Hi Experts, I'm working on EBS 11.5.10 and database 11g. I have trigger-A on wip_discrete_jobs table and trigger-B on wip_requirement_operations table.When ever i create discrete job, it inserts record in both wip_discrete_jobs and wip_requirement_op