Windows will not recognize my ipod

My windows will not recognize my ipod. I tried running the latest Ipod Updater several times and received the following error message: Ipod requires Windows 2000(SP) or Windows XP, Please update your software and try again. I have Windows XP so I'm a bit confused to why I'm receiving that error message.
Any suggestions would be greatly appreciated. BTW, I already tried "re-starting" my ipod and that didn't work either.

Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually).
First, make sure that the iPod is fully charged.
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
-- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
Also See:
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
If you are getting a ‘Missing Drivers’ message, try this:
1. Go to http://www.driverguide.com and register (free)
2. Download ‘usbstor.sys’ & ‘usbstor.inf’ to your PC and place them in your i386 Folder
3. Update both drivers by selecting the two files you just downloaded
4. Reboot computer
5. Open iTunes and then connect you iPod
If all the above fails, you may have a Virus, Malware or SpyWare problem.
If you do find that your Device Manager is blank, you should probably check up on this issue first: No Items Appear in the Device Manager List When You Open It

Similar Messages

  • Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

    Itunes for Windows and PC will not recognize my ipod touch 3rd generation.  Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled.  I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

    the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

  • My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

    My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Windows 7 will not recognize the ipod.

    I have an ipod 4th touch 64 gig. Windows 7 will not recognize the ipod. It will make the noise of a connection and will only charge. It will not show in my computer as a hard drive. It will show in Itunes and other third party programs. I have searched the net and tried most of the advice to try and fix but will still not show as a hard drive.
    Has anyone had this problem and if so is there a fix?
    thanks

    I did read along the way about some of the ipods not being recognized as a HD. I just installed Iexplorer and looks like it will do the job. As long as I have something other than Itunes to see it as a HD. I use Syncios and Copy Trans and both work great as to transfer music. But to see the ipod as a HD iexplorer will do the Job.
    Again my ipod 4th gen will show in my computer but only the DCIM folder and a few other with pictures, no music folder or the control folder from the ipod.
    My ipad works great and another ipod the long thin ones work but not this ipod touch 4 gen 64 gig.
    Any other suggestions or help much appreciated
    thanks for the iexplorer it should help

  • I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck.  However...
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • My new windows 7 will not recognize my ipod, what can I do.

    My new windows 7 will not recognize my ipod shuffle what can I do?

    Look at this article:
    http://support.apple.com/kb/TS1538

  • My itunes on my windows 8 will not recognize my ipod touch

    I have a new computer that runs windows 8.  My itunes is installed but will not recognize my ipod touch. Any suggestions?

    You want this link
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Also
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • HT1386 itunes will not recognize my ipod touch

    itunes will not recognize my ipod touch

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My itunes will not recognize my ipod touch

    I'm using a Mac desktop and it/my itunes will not recognize my ipod touch. I have resent my ipod and have also done all the suggested things on the apple website and still it is not being recognized, I do not know what else I can do. My macbook will recognize my ipod touch but I don't want to sync it to that itunes since it is already out of date, I want to sync it to my desktop mac where I already have the latest version of itunes, and all the music I want to sync onto my ipod touch. What can I do?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My itunes will not recognize my ipod shuffle after installing Mcafee

    My itunes will not recognize my Ipod shuffle, I have tried almost everything Itunes has suggested including uninstalling and installing Itunes.  I am at a loss, the computer recognizes the ipod and assigns a drive to it.  When I click on the drive there are flies in it.  I have disabled the firewall, checked all firewall settings as suggested in previous forums.  I have tried deleting the temp files but that keeps getting hung up on a file that says it is in use.  I can stll use my ipod because it charges but I can not update songs etc.
    I contacted Mcafee but all they did was turn the firewall off (I could have done that myself).
    If there is any help I would appreciate it!
    Thanks,
    Nadine

    The first thing I did in the morning was contact McAfee they turned the firewall off it didnt work so they said it wasnt their problem.  I attempted several other things using ITunes help but none of the solutions worked.  I would say it is something in my computer but the drive shows up in my files so the computer is reading the USB port.  I tried changing the drive but that didnt help.
    I cannot find a universal "OFF switch" in McAfee But I have turned the firewall off several times after many different attempts.
    I do not find an area where I can tell Itunes where the Ipod is in Windows Explorer, that would be helpful at least it could try to locate it then. You would think this feature would be available since Itunes would like us to purchase music through them to load on our equipment.  Since my computer does not recognize my Ipod there is no need for me to purchase music.
    Do I sound frusturated - I AM But I appreciate your trying to help.

  • ITunes will not recognize my Ipod touch.

    iTunes will not recognize my Ipod touch.  It attempts to perform a recovery, but must restore first.  but the restore fails, gives my 1604 code.  I have switched cords, USB ports all with no success.  I have a second touch (an older generation), a 160 GB Ipod & a shuffle that all work fine.  Not sure where to go.  One place said that I should reinstall iTunes, but wasn't sure if I would lost my library and apps.  Pleas advise.  Thanks.

    Try to reinstall iTunes as explained in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Backup your iTunes before, just in case. Apps and other bought media from iTunes can be downloaded again for free:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My Laptop will not recognize my Ipod

    I got my new ipod touch 4g and i tryed to connect it to my laptop but mid syncing my laptop froze, now my laptop will not recognize my ipod at all.
    Please help me with this issue.

    you really should start your own thread because hijacking another user's thread is frowned upon round here
    anyhoo, maybe [this|http://support.apple.com/kb/TS1538] support article article can help.
    JGG

  • HT1459 Serial number is faded and too small to read. Itunes will not recognize my IPod Classic. How can I delete the current iPod software and reinstall it to see if this would solve the problem?

    I recently upgraded my Itunes softeware, now itunes will not recognize my IPod Classic. If I delete the current IPod software and reinstall it, would this solve the problem, and if so, I'll need step by step instruction.

    Yep.
    Take a look here:
    http://www.snsforums.com/index.php?showtopic=235
    It appears that SANmp is indeed the most likely source of your problem.

  • HT203060 Latest version of iTunes will not recognize my ipod devicr

    I downloaded the lastest version of itunes and not it will not recognize my ipod device when I connect it.   I then removed iTunes and then reinstalled as directed and it still will  not synch

    Which OS is installed on your computer?

  • Have a new computer. iTunes will not recognize my iPod Nano only my iPod Touch.  The Nano was used on the old computer.

    My new computer will not recognize my iPod Nano.  The Nano was used on the old computer.  I also have an iPod Touch and this is recognized.

    Hello victoriafromurbana,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPod nano is not recognized on your computer, please follow the appropriate troubleshooting steps in the article below for your type of computer.
    iPod not appearing in iTunes - Apple Support
    Take care,
    Alex H.

Maybe you are looking for

  • How to pass a presentation variable to new window?

    Hi Experts, I need to give a link on Dashboard1 which opens Dashboard2 in new window. Is there any way that I can pass a presentation variable value of Dashboard2 from Dashboard1's link?? Thanks.

  • Huge File Sizes

    Quicktime has expanded all my FCP video files. Files that were previously normal size, made over two years ago, have become large files (ie...2.5 gigs turned into 20 gigs) without any processing. When capturing I'm also experiencing large file sizes

  • Is there a way that I can call a Swing application

    Hi all, Is there a way that I can call a Swing application from html page. fox example when user clicks on the url in html will activate a swing local application thanks

  • Cant find to specify type"HTML"

    Hi, this is written in the article: If you view the source for this page, you will see that the data set (dsArticles2) used for the 2nd region above, has its "description" column specified as the type "html". This tells Spry, that the text loaded fro

  • This is **bleep**ing stupid

    ok so heres the deal, i try to sign into skype the same old way automatically starting up when computer signs on that kinda stuff but it said it didnt recognize myy password for my skype username. so i try my password and it doesnt work, i figure out