Windows x64: install went fine but will not read from write to any ipod

Quicktimes 7.0.4 and the latest version of Itunes is installed and everything has worked fine other than I can not add any music to any of the three ipods that i have at my house(Pretty Big Freakin Problem). I have read previous posts and understand that apple posted that itunes does not support x64, but does anyone have any idea if there will ever be a supported version? Or should I just sell or get rid of my ipods? The apple post doesn't even say if they are going to work on this upgrade. Any help in solving this issue or letting me know if this is just a dead end, would be greatly appreciated.

In the PSE 12 folder, double click on the Setup.exe
If you get this, just click on Ignore

Similar Messages

DVD/CD-RW Combo Drive Will Not Read Or Write To Any Media

I have an HP ZT1130, running XP SP3. It has a Toshiba SD-R2102 DVD/CD-RW Combo Drive that will not read or write to any media. I don't get any error messages. The drive is present in MY Computer & Device Manager indicates it is working properly. When I place any disk in the drive, I get a message to "insert a disk". I have already uninstalled & reinstalled the device, removed the "high & low filters" in the registry, operating from a "clean boot state", run a registry cleaner. I am currently using Microsoft Media Player 11. I have run out of things to check, I hope someone has some answers.
Thanks In Advance,
nightster

I have an HP ZT1130, running XP SP3. It has a Toshiba SD-R2102 DVD/CD-RW Combo Drive that will not read or write to any media. I don't get any error messages. The drive is present in MY Computer & Device Manager indicates it is working properly. When I place any disk in the drive, I get a message to "insert a disk". I have already uninstalled & reinstalled the device, removed the "high & low filters" in the registry, operating from a "clean boot state", run a registry cleaner. I am currently using Microsoft Media Player 11. I have run out of things to check, I hope someone has some answers.
Thanks In Advance,
nightster

PSE 12 Bundled w/ Intuos 5 Tablet Downloads Fine But Will Not Launch From Intuos Site or Disc

I bought an Intuos 5 tablet last month. It came bundled with PSE 12. The tablet works excellant and I use it with CS6 100% of the time. I did not load PSE12 from the Intuos supplied PSE disc because I use CS6.
I have another computer that I use for photo editing and I loaded the Intuos onto it but since I don't have CS6 on it, I was going to load PSE12.
WRONG!!!!
PSE will not "Launch" via cd or Intuos website download of program.
I am running Windows XP(which is running CS6 fine), Win 7 on 2 other computers, 1 with CS6 and CS5, the other nothing...no photoediting sw at all. Hence adding PSE12.
I cannot get any phone or email support from Adobe on PSE12. Intuos engineers have no idea what is wrong either with their site download or cd version. But will not call Adobe for help.
Here are some of the errors.
After PSE is loaded and it asks "Do You Want To Launch?": I click ok and
It goes to a screen asking do I want to Uninstall PSE12?
If I go to the exe. file and click....I get numerous errors as follows:
Dan
Why won't post allow me to add "attachment"??

In the PSE 12 folder, double click on the Setup.exe
If you get this, just click on Ignore

DVD drive will play audio CDs but will not read from a DVD with photos saved on it -

DVD drive will not read DVD with photos saved on it. Also will not run system discs. Gives mesage "please insert a disc into Drive D. It plays CDs fine so appears to be working.
Please advise - thank you.
Gerry

I too have this same problem. Posted about it in another thread then saw this. I hope there is a fix.

My 6310 All in One will print a test page but will not print from Publisher, Notepad, etc. WTH?

My HP 6310 will print a test page fine, but will not print from Publisher, Notepad, etc. It goes thru the motions, but the image printed is almost not there. I have new ink cartridges in it. I have adjusted the print settings. STILL won't print properly. WTH???

Hm, okay, thanks for getting back to me again!
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and test print again.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

TS1389 Have my Mac configured it plays music fine but will not play films ???help

Have my Mac configured it plays music fine but will not play films ???help

This computer is not authorized to play film
If you purchased this content you can open I tunes and authorize this computer to play content.
But the Mac is already authorized !
Pass
Playing from I Tunes

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

Just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

Installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you. Restart your Mac after the combo is installed. It's ok to do this even though you are already running v10.6.8. Then try launching the app.
if that doesn't help, try contacting the developer of the app > http://support.aspyr.com/home

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

After installing 4.0 firefox will not load from short cut or program

ckicking ico or program will not load. reinstall 4.0 works but when closed it will not reopen.

Do you get any error messages?
Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
*http://kb.mozillazine.org/Kill_application
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
-----

Windows x64: install went fine but will not read from write to any ipod

Similar Messages

Maybe you are looking for