Windows XP displays "Disk Error" message during initial setup

I have gotten as far as choosing C:Partition3 <BOOTCAMP>[FAT32]. Windows setup then copies a bunch of files, initializes and then restarts and tells me to press any key which I do then I get a disk error and have to do a hard restart. I am never taken to the screen where I am to choose between NTFS and FAT so that I can format the partition.

A SOLUTION TO "INSTALL XP PRO SP2 INTO BOOTCAMP WITH LEOPARD, BUT NO OPTION TO FORMAT PARTITION"
After spending 14 hours trying to follow each and every leads in various discussion rooms, i was overjoyed to finally see the Windows logo on my screen.
THANK YOU TALEZ !
I followed carefully what he and Paul Thurrott's Supersite instructed. Below is Talez's advice:
Check to see if there is a file named "winnt.sif" inside the I386 folder on the Windows XP CD.
If there is follow these instructions to rebuild the Windows XP CD:
http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
Skip steps 2 and 3 (since you already have SP2 built in) and remove the "winnt.sif" file from the I386 folder before going on to step 4.
If this was not working, my last option would be to reformat the whole Mac HD, install Windows, re-install Leopard and retrieving my data from Time Machine - although this is highly risky and not recommendable.

Similar Messages

  • Display an error message during a few seconds

    Hi!
    When submitting a form, I am displaying a error message saying that the actions performed work fine. Afterwards I would like this message to disappear after a few seconds. How can I do that ?
    in the function called by my action button that submit the form i have:
    public void saveForm() {
    // .... operations ....
    context.addMessage(null,new FacesMessage("Everything is ok"));
    }

    Hi,
    I doubt if there is anything you can do from the action method
    saveForm(), however this you can do it from the client side just
    put some seconds delay in onload method in javascript and
    redirect to some other page.
    Thanks
    Ansar

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • B575 Windows 7 display Driver error message

    Hi, I'm new and not well educated on the computer a little more than a beginner so please bear with me.
    Lately I have been having the problem that i will be looking at the computer and it will go black and then turn blue with a whole lot of messages and numbers on it and tells me some that if this happened just the once restart the computer but if it has happened more than once to follow the directions an it has happened more than once. it tells me to reset my display driver or check that anything i have newly installed is correct.  i dont have anything that i have installed . i turn the computer off and then have to start it as normal and then it runs fine until the next time.  It is a laptop b575, about 2 years old windows 7. i have checked the drivers in the device manage and they say i have all the up to date ones so i cant fiure out what it is. the message also says to  remove bios memory or cach etc and i dont know what that is other thing i only have is the thing you can use for fingerprinting and i dont use it can anyone help me please?
    Moderator Note; subject edited

    is there someone that can help me with this?

  • How to show a popup window to display an error message

    Hi,
    I want a popup window to popup when an error occurs on pressing an "OK" button in my GUI. What should I use for that? Is it a JWindow?

    A JOptionPane is probably easiest:
    http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html

  • ITunes displays -48 error message when syncing iPod Nano on Windows XP

    My girlfriend's mom's iPod Nano ran out of charge while jogging so she decided to charge it on her daughter's iHome. The next day she went to use her iPod but it was totally empty of all music and files. When she tried to sync it to iTunes, she received an eror message stating, "An unknown error has occurred (-48)" from iTunes and a Windows message stating that some iPod folder/file was corrupted.
    If anyone receives such a message, I was able to correct it by:
    -Plugging in your iPod to your PC
    -Ignore the error messages
    -Go to My Computer
    -Find your iPod's drive letter (ie. G:)
    -Right-click on it and select Properties
    -Go to Tools Tab >Error-checking and select Check Now
    You should be able to sync your iPod as before. I do not claim to be an expert so be warned that it may not work for you. Good luck!

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • ITunes displays -50 error message when syncing iPod on windows 7

    I am trying to sync my ipod and appears this error
    iTunes displays -50 error message when syncing iPod

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • Display an error message in Portal during creation of Object Link

    Hi,
    I have a requirement where I need to throw an error message in Portal during creation of Object Link.
    The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
    I tried for some enhancements in BAPI_BUS2172 but it does not work out.
    Please help.
    Thanks in advance.
    Arbind

    Hi,
    If you include the UI, it will display at the top of the screen..
    Please see below how to create a message in the message editor.
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    and this is how you access the error message in the application ti display it to the end user
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    Regards,
    Ganesh N

  • TS1389 I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situatio

    I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situation happens.

    It's an endless circle.
    See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • How i can display default error message in alert window

    how i can display default error message in alert window
    i.e.,
    i have a text field with datatype Alpha
    if i am giving numbers.etc then it is displaying
    FRM-50001: Acceptable characters are a-z,A-z and space
    I want to display this message in alert window
    please tell how to do this

    In the on-error trigger :
    Capture error_code and error_text in a variable.
    Set the alert title to something meaningful.
    Set the alert message equal to the captured error information.
    Display the alert.
    declare
    v_alert varchar2(100) := 'ERROR' ; -- name of alert to use
    v_title varchar2(100) := 'Error !' ; -- text to display as title
    v_msg varchar2(200) := error_code || ':' || error_text; -- message to display
    v_btn number ; -- button pressed
    begin
    set_alert_property( v_alert, TITLE, v_title );
    set_alert_property( v_alert, ALERT_MESSAGE_TEXT, v_msg );
    v_btn := show_alert( v_alert );
    end;
    ----------

  • Missing MSVCR71.dll Error Message During Launch

    I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
    I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch.  The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that.  I did not write down the error message before fixing the problem).  There is an “OK” button below the message to continue loading Adobe Encore.
    The error message is only displayed if all other CS5 programs are closed.  During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
    The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application.  The Component can be located here: http://www.xiph.org/quicktime/
    When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed.  Juicer will run without the Component, but gives a message that it is missing.  I have removed the Component since I use Encore to a much greater extent.
    To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
    While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above.  I should also note that I am using Windows 7 Home Premium.

    Greetings,
    My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime.  Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
    Control Panel
    Windows Firewall
    Advanced Settings
    Outbound Rules
    New Rule...
    Program/Next
    This program path:  (use Windows Explorer to search)
    c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
    Allow the connection
    (Leave checks Domain, Private, Public)/Next
    Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
    Good luck,  Michael

  • Display Custom Error Message in OIM 11g

    Hi,
    I'm trying to display an error message from a validation event handler but seems that am missing something. When the "oracle.iam.platform.kernel.ValidationFailedException" is thrown from a validation handler an error message is displayed: "An error occurred". If an error code is provided (see code below) then the message looks like: "An error occurred. The corresponding error code is ERR-0001". I guess that some resource bungle with corresponding messages should be provided.
    the code used:
    package test;
    public class UserGeneralValidationHandler implements oracle.iam.platform.kernel.spi.ValidationHandler
    @Override
    public void validate(long processId, long eventId, Orchestration orchestration)
                   throws ValidationException
    String errorCode = "ERR-0001";
    String message = "Simple validation message.";
    ValidationFailedException ex = new ValidationFailedException(message);
    ex.setProcessID(processId);
    ex.setErrorCode(errorCode);
    throw ex;
    Q:
    1.What is missing for complete solution?
    2.What is the algorithm that used by OIM to find default or non default resource bundle?
    3.How to change out-of-box validation messages? For a sample "The organization ABC does not exist." message is shown if non existing organization is provided during user creation and I'd like to have a different one.
    Regards
    Serge

    rename OIMUI.jar  to OIMUI.zip
    find logging_en and loggin.properties.
    Modify the "IAM-2050512" error message with your custom message
    Find Agent and agent_en.properties.
    Find Note[ERROR_SUBMITTING_REQUEST].text.  Modify the message. Make sure the message must be the same with in logging.properties("IAM_2050512")
    Deploy
    change the  OIMUI.zip to jar
    replace the existing OIMUI.jar
    login to weblogic  and redeploy OIM (oim.ear)
    no need to restart OIM server.
    Test:
    create a request in web console again, you must see the custom message when you hit the submit button
    hope this helps.
    -rad

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • Error Message During Vista Install W/ Bootcamp

    I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
    Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
    I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
    Please HELP! I need my vista installation up and running for work!

    "but when detecting hard drives, nothing shows up in the list."
    I don't really understand that statement as without any drives showing up how were you able to even start the install?
    At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Maybe you are looking for