Windows XP Embedded Secuirty Updates
I apologize if this is in the wrong place but I was unable to find a Windows XP Embedded category.
I believe support for Windows XP Professional regarding security updates will end this year April 2014. Support for Windows XP Embedded lasts beyond that time. My question is does this mean that Microsoft will continue to release security patches
for Windows XP Embedded? If so then how will one obtain these patches? If Microsoft will not release security fixes / patches for Windows XP Embedded after the Windows XP Professional support ends what does the extended "support" of Windows XP Embedded
mean exactly?
This must have been answered somewhere, but I have been unable to find a definitive answer anywhere.
Cor,
Thanks I'll try to find some answers there.
Barry Wang, can you also suggest an appropriate forum where I can post and receive an answer to my question?
Thanks.
Similar Messages
-
Rebranded from POSReady 2009 to Windows XP Embedded after updates
We are currently building a Windows Embedded POSReady 2009 image for a number of touch based terminals.
I started off by installing the base OS POSReady 2009 (non-evaluation version) and ran the windows update. After about 142 updates later my OS is now rebranded to Windows XP Embedded(System Properties, Login screens, etc...). I was able to narrow down the
problematic update to
KB975713
http://technet.microsoft.com/en-us/security/bulletin/MS10-007
due to the severity of the update and our terminals having a network connection we can not exclude the update from the build. I also checked the underlying OS using the method advised here
http://social.technet.microsoft.com/Forums/en-US/cd3a07e5-87c0-429e-ac81-4223dbb5e91b/xpe-vs-wepos?forum=posready
both pre and post updates are the same (HKEY_LOCAL_MACHINE\SYSTEM\WPA\POSReady = 1). Would it
be safe to assume the rebranding was skin deep?
This caused issue with our users as they are questioning our choice of OS due to Windows XP Embedded having a shorter end of life support vs Embedded POSReady 2009.
http://support.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=embedded&Filter=FilterNO
We have thought about changing the images inside the dlls but decided it will violate the EULA. Is this correct?
The question is how would we go about changing the brand of the OS back to POSReady 2009 without violating the EULA?Yes, for example that there is already IE7 included out-of-the-box instead of IE6, etc. (newer software versions), that there is 'fbreseal -keepall' optionally available instead of SysPrep and unattended setup is completely different. Additionally POSReady2009
comes with some interesting EEFs: FBWF for instance.
Best regards, Roman Maier -
How to Change Windows XP Embeded SP3 on OEM device
Hi
I have an spectrum analyzer R&S FSP.
It have a Windows XP Embeded SP3 that we use for a remote desktop connection for monitoring from somewhere else.
I want to reinstall its OS , what should I do?XP Embedded is a customizable version of XP. You need to go back to the manufacturer of the spectrum analyzer to get the OS update or re-installed.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET -
HP Photosmart C3180 through USB won't connect (Windows 8 Embedded)
We have an HP Photosmart C3180 which works fine on either a laptop or other pc's with Windows 7, however when we try to install it on a Thin-client which has Windows 8 Embedded it can't find the printer when we use the installer package from the HP site. (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110014-2&cc=us&dlc=en&lc=en...
The installer will show the message to plug in the USB cable into the pc, but when we do it shows the connection is established but then after about 6 minutes it will fail. In the device manager we do get the printer shown as Other Device and shows that it needs to update its driver. (which wont work.)
I tried to manually add the driver after extracting the installer file but none of the inf. files allow me to install the correct driver. Or at least, thats what windows tells me
Is Windows 8 embedded not supported?Hi @SHS_NL
I suspect your question would be better answered in the HP Enterprise Business Community, as Windows Embedded 8 Standard is a modular operating system designed for Enterprise use.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
I don;t know if this would help at all but it is the best I can offer; Windows Embedded 8 Standard
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
TPC 2206 - Windows XP Embedded (XPe) OR Windows Embedded Standard 7??
Hello. I have to buy a TPC 2206.
Should I buy with Windows XP Embedded (XPe) OR Windows Embedded Standard 7??
I have LabVIEW 2012 (DSC y/o touch pannel module) but I'll probably update to LabVIEW 2014 in the future. (II have to be able to program the computer with both options).
Thanks!CracKatoA wrote:
Ok, But I need to know if I will be able to program the TPC 2206 (witn WES7 installed) with the LabVIEW DSC module 2012 version.
Based on the LabVIEW OS Roadmap, I think you will be just fine.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)
RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Windows 7 Embedded Stuck In Service Mode
Hello,
I am having an issue with deploying a task sequence to Windows 7 Embedded Clients. I have selected the option under "Write filter for Windows Embedded devices" to "Commit changes
at deadline or during maintenance windows"
The machine reboots and enters servicing mode and displays "this computer os being serviced". The task sequence runs successfully but the machine doesn’t reboot and enable the write
filter again and gets stuck at "this computer os being serviced".
The console monitoring tab shows the task sequence as completed successful and if I log into the client the SCCM Software Center shows the sequence as installed.
So I have two questions
How do I get it to configure the write filter again after it has finished?
How do I get this client out of service mode without rebuilding it?
Any help would be appreciated.No I never did get to the bottom if this. We do not tend to use SCCM to update the Windows 7 Embedded machines as it is very unreliable. I have found that if they are removed from the domain and re-added you can get them out of service mode and
users can carry on.
A lot of the problems we have seen are caused by the SCCM client not running correctly on Windows 7 embedded. We found the SCCM client was in a working state at the start of the deployment however once the write filter was disabled and
rebooted it would lose all of the options under actions and get stuck in service state.
For now we are re imaging the devices using SCCM and PXE to update the images on the devices when needed. This is not the best method but I ran out of time to look at the issue and there is very little information on SCCM management for W7E available other
than tick "Commit changes at deadline or during maintenance windows" and everything will work.
Regards
Martin -
Installing Adobe AIR on Windows XP Embedded
Hello,
I'm working at a museum using kiosk type clients running Adobe AIR. One type of thin clients we're using is running Windows XP Embedded. I've tried installing standard Adobe AIR on it via web, but it keeps failing. Is there some way to get Adobe AIR up and running on the Embedded version of XP?Any official word on this? It seems Flash Player is supported
-
Windows 7 PRO GP update error
We have a very peculiar problem
We have a Primary DC & Secondary DC installed in all our office ( Windows 2008R2). The Domain name is abc.com for all the Offices and the replication between the DC's happen in between the office happen without a problem.
The clients in each of the offices gets authenticated from the DC in the respective office.
But for a group policy update it gives an error as below
"Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file
\\<FQDN>\sysvol\<FQDN>\Policies\{BD732AAF-016F-11D2-945F-00C04Fb984F9}\gpt.inifrom a domain controller and was not successful. Group Policy settings may not be applied until this event is
resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The error happens only on some clients.
We are able to Ping, connect to the local DC and the client gets the IP from the local DC and also gets authenticated by the local DC for log on.
On the PC which gives an error if we try to ping domain name - abc.com it returns the ip of the DC in a another office and not the local DC.
Request to suggest a solution / tips to identify the problemThanks for your reply
Please find the IPConfig Details as requested
Windows IP Configuration of CLIENT with Problem
Host Name . . . . . . . . . . . . : NP
Primary Dns Suffix . . . . . . . : ALT.COM
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : ALT.COM
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-19-99-F2-5B-BC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::bc5c:5976:37b2:d42a%14(Preferred)
IPv4 Address. . . . . . . . . . . : 10.102.22.72(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, July 08, 2014 8:02:23 AM
Lease Expires . . . . . . . . . . : Wednesday, July 09, 2014 8:02:23 AM
Default Gateway . . . . . . . . . : 10.102.22.1
DHCP Server . . . . . . . . . . . : 10.102.10.10
DHCPv6 IAID . . . . . . . . . . . : 318773657
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-FE-B8-99-00-19-99-F2-5B-BC
DNS Servers . . . . . . . . . . . : 10.102.10.10 10.102.10.11
Primary WINS Server . . . . . . . : 10.102.10.10
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.ALT.COM:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : ALT.COM
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
===========================================
Windows IP Configuration on DC
Host Name . . . . . . . . . . . . : ALTHODC03
Primary Dns Suffix . . . . . . . : ALT.COM
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network C
on
Physical Address. . . . . . . . . : 00-19-99-7E-7F-62
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.102.10.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Default Gateway . . . . . . . . . : 10.102.10.1
DNS Servers . . . . . . . . . . . : 10.100.10.10
10.102.10.11
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{4353BDBD-759C-45E1-A523-621CC16121AA}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
=======================================================
We do not use Sysprep and also we normally do not use imaging
Domain Time is in Sync with DC & Client -
I'm trying to install the latest (standards-based) browser I can on on old Windows XP Embedded computer. The computer's hardware does not meet the "Recommended Hardware" of a Pentium 4 (it has a P3). I initially tried installing/running Firefox version 28, and that seemed to work fine. Version 36 gives the error I stated in the question. It's not paramount that I run the *latest* version of Firefox (the browser is ONLY used for an intranet application), but I'd like to install the latest version that will run, and if there's a simple fix for this version, I'd like to explore that.
Regards,
GerratWell, I was pretty sure it didn't have malware. It was running a steady state - like program & we have dozens of these on our network (but not on our domain). We have a corporate anti-virus (Sophos) running on all the computers on our domain, and there are no notifications of anything suspicious coming from these units.
Just to be sure I installed and ran an antivirus scan against it though - as suspected, nothing suspicious found.
As I mentioned, FF 28 runs fine, it's just the latest (36.0) that doesn't run (I haven't tested any versions in between). Either seems to install without hitch, but when the latest version is run, it gives the error about the missing dll.
Regards,
Gerrat -
I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?
iTunes 11 is compatible with
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
Try:
Trouble installing iTunes or QuickTime for Windows -
NI DAQmx 14.2 and Windows 7 embedded
Hello,
I try to install an application using labview 2014 with an acquisition device NI USB-6251 on a Windows 7 platform brand new embedded.
The problem is it seems the installer refuses to install DAQmx 14.2 on this machine, I just get the following messages:
(See the images below)
Whenever I confirm Insatallation to continue to the end.
When the PC is restarted, the NI USB-6251 device is not recognized either by windows or by MAX. (Not valid drivers)
I transferred the driver manually (nixsrkw.sys) of a PC that works with the device in the path I indicates the installer plug and play windows (Windows / system32 / drivers), without success! (No valid driver)
I tried several installer configuration, nothing happens, I have to wonder if NI DAQmx14.2 is compatible with Windows 7 Embedded ...
Thank you for helping me a bit if you have already encountered this kind of problem, I do not understand what blocks the installation of the USB driver.
Sorry for my poor English
Greetings to all.
Lionel
Attachments:
AFL-W07A_Pb_Install_00.png 28 KB
AFL-W07A_Pb_Install_01.png 29 KB
AFL-W07A_Pb_Install_02.png 29 KBHello Miello,
Thank you for your answer, I just tried the "run as Admin ..." with the right button, with the same problem in the end.
It is true that this manipulation is not well documented in Windows 7.
I'll try the same installer with a machine running Windows XP embedded, I'll let you know.
If the installation succeeded this clearly show that the problem is on the Windows 7 side, otherwise the problem is in the application builder or modules ...
To be continued ... -
On Windows Vista, installed AdobeAir update as required. Next screen said "Mandatory Upgrade" & when I clicked on it, version 2.0 of Acrobat was removed, new version 3.2 wouldn't download error# 16820! What do I do now? Need Acrobat, but I don't know what to do next! I'm working at a small church w/no budget. so please help if you can.
Vista requires AA8.1 at a minimum. I think that a few have gotten AA7 to work, but it is not supported by Adobe on VISTA. I know that is not good news, but it may be that you will be unsuccessful. At the very least, expect to have to print to file and open distiller to complete the conversion. I think that AcroTray is one of the major problems with the use on VISTA.
Hopefully someone might stop by that has successfully gotten over the registration problem you are having, and possibly gotten AA7 to work in some sense on VISTA, but do not be surprised if there are no takers. Good luck. -
Not possible to run CodedUI tests on Windows 7 embedded
Hi all,
I am trying to get my CodedUI tests running on the target machine with Windows 7 Embedded.
For that, I installed on the target machine:
Visual Studio 2010 Test Agent
VS2010 SP1
Next I try to run the CodedUI test from the command line using mstest.exe (since no Visual Studio may be installed on target
machine). However, before even executing the first line of code in my test, mstest fails after showing a popup window with following message:
"the ordinal 459 could not be located in the dynamic link library urlmon.dll"
When looking in the detailed logs of QTAgent32.exe I see a 'System.BadImageFormatException' thrown by the PluginManager of CodedUI when trying to
start an Internet Explorer plugin. See detailed stacktrace below this message.
This might be caused by the fact that this Windows Embedded installation does not contain Internet Explorer (for security reasons). The CodedUI test
and application under test however do not need Internet Explorer at all, the application is a WPF application.
So, my questions:
- Does anyone know how to get rid of this error without installing Internet Explorer?
- Any ways to prevent MsTest.exe to start the IE extension for a CodedUI test?
Some things I tried already but did not bring success:
- Run a completely empty CodedUI test; it triggers the same error.
- Remove IE extensions from C:\Program Files (x86)\Common Files\Microsoft Shared\VSTT\10.0
- Remove unneeded things (datacollectors) from MsTestSettings file.
Any help/ideas appreciated!
Jan Lavrijsen
Complete stack trace:
Agent: adapter run thread for test 'CutPowerDuringImport' with id 'b7c688eb-89ac-4654-b638-a5699f579871'
»DebugInfo
»Trace »FirstChanceException
»FirstChanceException 'Microsoft' causing 'System.BadImageFormatException' - Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 800700b6 The operating system
cannot run . (Exception from HRESULT: 0x800700B6).
»[CausedBy=Microsoft],[FirstChanceException=System.BadImageFormatException],[Count=1]
»CallStack: at Microsoft.VisualStudio.TestTools.UITest.Extension.IE.IETestPlugin.StartSession(System.Boolean recordingSession) [IL: 0x19][Native: 0x4B]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestPluginManager.StartSession(System.Boolean recordingSession) [IL: 0x2B][Native: 0x95]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestService.StartSession(System.Boolean recordingSession) [IL: 0x34][Native: 0xA9]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.StartSession() [IL: 0x37][Native: 0x6C]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize() [IL: 0xB5][Native: 0x163]
at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(System.Object sender,Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs e) [IL: 0x3C][Native: 0x76]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs args) [IL: 0x15][Native: 0x17]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod() [IL: 0x3E][Native: 0x96]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest() [IL: 0x8D][Native: 0x113]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestResult result) [IL: 0x46][Native: 0xD1]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter executer,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext
testContext,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapterContext userContext,System.Boolean isLoadTest) [IL: 0x27][Native: 0x55]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext testContext,System.Boolean isLoadTest,System.Boolean
useMultipleCpus) [IL: 0x109][Native: 0x32B]Hi Jan,
Thanks for your response:)
I think it is a good feedback for this issue, but as far I know, it is by design now, we need to use the IE extension for test projects. My understanding is that it would find the accordant UI Test Controls with your app UI controls, so it would search all
test controls include the IE controls, and then use one real UITestControl to instantiate an object which is equal to the real UI control, so we could playback the recorded action.
WinButton uICloseButton = this.UISnippingToolWindow.UISnippingToolTitleBar.UICloseButton;
But I think you can submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,maybe
Microsoft engineers will share us a more plausible explanation.
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Upgrade to Windows 8.1 Pro Update 1 and it killed all my 3rd party drivers
Hoping someone can help - my PC upgraded Windows 8.1 Pro (fresh install a few months ago) with the 'Update 1 patch' which was made available a few days ago. It was done via Windows Update - I let it do its thing for about 15 minutes, restart etc.
Once the machine restarted, I noticed the following:
- no network connection
- no sound
- no working camera
I went to the device manager and see a stack of 3rd-party devices with exclamation marks, all stating code 28 (the drivers for this device are not installed). I go to each device and try to update the drivers - it looks like its going to work and then
gives the error "The system cannot find the file specified".
I do some googling and find the setupapi.dev.log. The log for every device with a problem reads like this:
>>> [Device Install (DiShowUpdateDevice) - HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001]
>>> Section start 2014/04/12 01:23:46.588
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 01:23:46.608
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:46.647
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 01:23:46.686
ndv: {Update Driver Software Wizard for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
!!! ndv: Driver package import failed for device.
!!! ndv: Error 2: The system cannot find the file specified.
ndv: Installing NULL driver.
dvi: {Plug and Play Service: Device Install for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
! ndv: Installing NULL driver!
dvi: {DIF_ALLOW_INSTALL} 01:23:48.883
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.883
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 01:23:48.884
dvi: {DIF_REGISTER_COINSTALLERS} 01:23:48.884
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:48.885
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 01:23:48.885
dvi: {DIF_INSTALLDEVICE} 01:23:48.885
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.886
! dvi: Installing NULL driver!
dvi: Install Null Driver: Removing device sub-tree. 01:23:48.887
dvi: Install Null Driver: Removing device sub-tree completed. 01:23:48.890
dvi: Install Null Driver: Restarting device. 01:23:48.892
dvi: Install Null Driver: Restarting device completed. 01:23:48.892
dvi: Install Device: Starting device. 01:23:48.892
dvi: Install Device: Starting device completed. 01:23:48.893
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 01:23:48.894
ump: {Plug and Play Service: Device Install exit(00000000)}
ndv: {Update Driver Software Wizard exit(00000002)}
<<< Section end 2014/04/12 01:23:50.286
<<< [Exit status: FAILURE(0x00000002)]
It seems like 'update 1' as crapped all over my driver store.
What can I do to fix this - I have tried a raft of things such as pnputil commands to add the driver INFs manually (they fail saying 'element not found'), but still I am stuck without sound, network and camera.
This will be the last time I let Microsoft update automatically install - it will now be 100% manual, and done after a few weeks to ensure there aren't bugs.espero y te sirva este link :)
http://blogs.itpro.es/octaviordz/2014/04/05/actualizar-de-windows-8-1-2012r2-a-windows-8-1-ws2012r2-update-con-script-de-powershell/
Freelance-IT http://www.freelance-it.com.mx
Maybe you are looking for
-
Dear all, When sale order form is in "add Mode", i can't read the matrix's line data via DB data source(rdr1). Sould i read it through user data source?? If so, how could i know which user data source is bind to that matrix?? Regards, Kit
-
Deploying JDeveloper 9052 app. on iAS 10.1.2.0.2?
HI We've upgraded our Oracle Application Servers to 10.1.2.0.2. Some of the applications we need to deploy to these server is developed using JDeveloper 9.0.5.2. The applications is JSP applications using Oracle Business Components for Java (BC4J). S
-
Hi Experts, We are paying the vendors through F-58 transaction. At the time of payment the cash discount showing in the document properly and when we go for the printout the discount amount showing wrong. Example: We paid a vendor for $ 1,00,000. acc
-
Change mm/dd/yyyy to dd/mm/yyyy when selecting date via dateSelector??
Hi Experts, i have attribute of date type that has been binded to input field in a web dynpro Java application. when application is executed user can select a date via DateSelector that appears automatically. Problem is after the date has been se
-
Send postmaster mails to BLACK HOLE
Hi, Is there anyway I can send postmaster mails to black hole ( /dev/null ) I know that people will ask why I want to send postmaster mails to /dev/null. But this is the requirement. Cheers Rakesh Malik