Windows XP style and JRE 5 update 9,10 and JRE 6.0 problem
Good day.
I have an application that is deployed on more than 700 PCs in different countries. Application is being deployed via Java Web Start and is being used by our clients for more than 3 years already.
Today we are receiving more and more complains coming from our clients because of application GUI misbehavior. What happens is this. When JRE on the client PC is updated to JRE 5 update 9 or update 10 or re-installed to Java 6 AND Windows XP Theme is applied then most of the Elements(JCheckBox, JRadioButton, JTextField become larges and etc.) on JToolBar disappear. If Windows XP Theme is changed to Classic everything gets to normal.
On JRE 5 update 1 up to update 6 User Interface works fine even with Windows XP Theme applied.
Application GUI is build using Borland JBuilder GUI Designer.
Please, please advise where could be the problem.
Thank you very much!
Good day.
I have an application that is deployed on more than 700 PCs in different countries. Application is being deployed via Java Web Start and is being used by our clients for more than 3 years already.
Today we are receiving more and more complains coming from our clients because of application GUI misbehavior. What happens is this. When JRE on the client PC is updated to JRE 5 update 9 or update 10 or re-installed to Java 6 AND Windows XP Theme is applied then most of the Elements(JCheckBox, JRadioButton, JTextField become larges and etc.) on JToolBar disappear. If Windows XP Theme is changed to Classic everything gets to normal.
On JRE 5 update 1 up to update 6 User Interface works fine even with Windows XP Theme applied.
Application GUI is build using Borland JBuilder GUI Designer.
Please, please advise where could be the problem.
Thank you very much!
Similar Messages
-
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?
you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC -
Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim
please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.
ASk your friend who unlock the phone for him/her.
ONly the carrier that the phone is locked to is authorized to unlock it.
bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier. -
Sir I have iPhone 5 and I updated ISo 6 and personal hot spot is missing
Sir I have iPhone 5 and I updated ISo 6 and personal hot spot is missing
When you enable the 'Personal Hotspot' then any device that connects to that device is being tethered to your iPhone 5.
Some carriers see this as a special service that they charge extra money for, so they disable on your phone unless your are paying them extra. -
Hello!
I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
Please Help me!
MacBook Air (11-inch Mid 2009)Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update. -
So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions
Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
I bought three movies and I updated my iPad 2 and they got deleted and I don't know how to get them back can someone please help me
If for some reason you failed to transfer them to your computer before your update, then they are gone.
In the U.S you can redownload some purchased movies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
helpp
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have an ipod touch and recently performed the latest updates of itunes. It said there were problems with my ipod and it need to be restored. I did that and now it says it's in recovery mode and that I need to restore it. It takes 45 minutes and I've tried it several times and keep getting same message. My ipod is now unusable and it has a photo of a plug with an itunes icon telling me to plug it in. It is plugged in??? I restarted the computer, tried another computer, reset my ipod and nothing. Help!
If not successful try:
- Placing the iPod in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try installing using the manual install method described here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
iTunes offered to update my old iphone to version 3. something and now the phone doesn't work because it says the SIM is incompatible.
This is the sane SIM that was working fine before the update.
I even uploaded some photos.
How can i get back the old version of iphone software so that it accepts my SIMThe original owner has a new iphone and he gave me this one. All we did was put my SIM card in and it worked; I'm sure he didn't have to hack it to unlock it. He just had this old phone lying around.
How can he authorise unlocking it if he doesn't have the same SIM anymore -he'smoved countries a few times. -
I have 2 iphones and after updating the contacts and messages went to both
I have 2 iphones and when I updated one to 7.0.3 I had contacts from the other phone on it and when I texted the other phone the message came back to me also. I talked to my provider and what they had me do didnt work. Its getting frustrating to say the least. I hope u can help me
I have been hesitant to do a restore as the data setting for the carrier are different for both carriers. Does retore actually change network features?
-
AFter updating with ios8 my ipad2 is not very responsive to touch. Both facebook and chrome are hopeless with it
Using AirPlay on iPad
http://support.apple.com/kb/HT4437
AirPlay Mirroring
http://support.apple.com/kb/HT5209
Trouble shooting AirPlay
http://support.apple.com/kb/TS4215 -
I am using an old iPhone 3 as an iPod touch. It's no longer connected to a network. I am trying to download apps while using a secure internet connection, however, it's not allowing me to do so. The message is gives is: "Cannot Connect to the Store" A secure connection could not be established. Please check your date and time settings." I'm confused as to how I can fix this. The time seems to be correct, and I'm not using public internet.... Any suggestions??
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I need to get my old information back text contact numbers and it got lost when it up-dated the software..Can you tell me how I can get all my old information back???
I am not sure can you tell me how I can tell my phone just loaded it with all new setting and no contact or text or music in on it now
-
iphone 4s, its my own i was using a different account for the app store i have the iphone but i cant activate it,, and i cant dont want to buy new one,,, what to do ?
You must remember or recover your ID and password, no-one here or at Apple can help you with that.
Maybe you are looking for
-
Resetting PIX 515E 'enable' password and/or Factory Reset
We have a PIX Firewall where the last user of the device had not changed the 'enable' password and username so we are locked out of the device. I did some research and found a password reset tool that was supposed to clear the 'ena
-
Volume control when using Apple TV for playing video
Hi, I'm using a pair of active speakers with no built in volume control with my Apple TV. When using the ATV for streaming audio (for example Spotify) I can control the volume with the iOS device I'm using as the source, but not while streaming video
-
I have downloaded and album and it is not showing in my library
I have downloaded an album & it's not in my library & purchases says it has down loaded.
-
Has Anyone used View Generator in Workspace Manager 10.2.0.3A
It does not seem to show the dimensional attributes and all the pretty pictures in the blogs/forums seem to work!!!! Can you tell me if I am missing something?
-
Has this happened to anyone else? if so how did you fix it?
my computer doesn't start up right. I start it, goes to startup screen and then either stays there or a black screen pops up and says "job reset will occur after ## more consecutive failures" and then it stops doing everything.