Wireless 1130 AP can't use command line

I am unable to type anything in the command line of this AP. It has the latest IOS image installed. I can see the output of the bootup process and it loads the IOS image and brings up interfaces and whatnot but it doesn't go to the command line. I have attempted to turn this AP into autonomous mode and feel that I was successful but am still unable to use the command line.
Can someone please help me out?
Thanks

Hi,
Yes make sure your console client terminal setting is same as below and then check.
Bits per Second: select 9600 (or desired baud rate)
Data Bits: select 8
Parity: select None
Stop Bits: select 1
Flow Control: select none

Similar Messages

Can you use command lines to copy files in UNIX to Oracle Apps

Hi! We have installed the oracle apps 11.5.0 to a unix operating system. And we use ftps to upload the rtf and xml files to the unix server. Is there any command lines we can use to copy all the rft and xml files in the server to the real location of where the report files stored without going through the XML Publisher font end through the internet explorer? Thanks for your help!

Hi,
From what you have mentioned, I believe you are writing custom xml pub report
1) Storing all your template and sample xml data file on Unix box by FTPing it. This step is not required as XML publisher picks template from XDO tables (where it is stored in CLOB), unless you are explicitly Coding to use templates from a fixed location like <CUST_TOP>/<xml_templates>
2) As part of XML setup, you need to define the template and datasource using the front end. This causes the Template and XML data (sample) to be stored in XDO tables (as clobs). This step is basically required and unavaoidable.This step can be automated using FNDLOAD tool (not sure).
Hope it helps somewhat.
Neeraj

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

Can an Access 2013 accdb file be encrypted using command line switches?

Can an Access 2013 accdb file be encrypted using command line switches?
I found all the command switches, but nothing about encrypting. And I've searched online and found nothing.
Can this be done?
Thanks!

Hi Sharon2000,
I think you could try the Database.NewPassword Method (DAO) in the VBScript file, and you could get more information about it from the link below:
#Database.NewPassword Method (DAO)
https://msdn.microsoft.com/en-us/library/office/ff844754.aspx
Here is a simple demo to achieve your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Can I convert Word 2003 to PDF using Command Line

Hello All,
We have a document generation tool which generates documents in Word 2003 format. The document generation is initiated by the user and the process of generating document is on a remote server. The word file is sent back to the user in word format.
We would like to convert this doc file to PDF/A format. And we would like to do it programatically, may be using command line arguments. Is it possible?
Realistically, it is not possible that all the users will have Adobe writer installed in their desktops. In this case, it is possible that Adobe writer is installed in a server and the documents can be converted remotely using command lines?
Your support on this will be very helpful for us.
Thanks & Regards
Irfan

> Can I use Acrobat Pro to convert a Word 2003 doc to PDF using the Windows command line?
No.

I want to delete a wireless entry in Keychain from the command line - how?

We have 800+ laptops that have a wireless that we want deleted from the stations keychain. The ssid is called "campus".
I would like to know how to using command line delete the campus entry. I have been playing with the security command, but cannot seem to delete the keychain entry.
Any suggestions?

"Everything I know about the command is in the man page. I can't give you a literal command, because I don't know what to put in for the arguments. To be honest, if the man page is not understandable enough for you to build the command, I don't think you should use it at all. Use Profile Manager in OS X Server, which is the right way to do what you're trying to do."
I do not know why this post did not show up here on the thread, I did get the email. Not sure how to respond. We have 800 stations. Can not go and touch each one, so looking for a command line to remove the ssid "campus" - If I read your message correct, you do not know the command line either for this. Thank you.

How to print a specific page from a given PDF document, using command line, please?

Hello,
I need your advise, please. My customer requires to print a specfic page from a pdf document they receive, using command line or 3rd party solution.
Anything you can advise, please? I have seen AcroRD32.exe options, but can only print the whole document.
Kind Regards

Not sure if there are any examples. The Acrobat SDK is a must, but it is best treated as documentation to study rather than examples to copy. The examples only illustrate a tiny fraction of the capabiliies.
(One other note: the solution must involve the client owning Acrobat; Acrobat is not for server use).

How to open url in acrobat reader using command line

Hi,
I need to open file from url using command line, but I'm still getting some error (wrong filename).
I've tried for example this command:
AcroRd32.exe http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Can anyone help me and tell me what's wrong?

You can't use a URL as parameter for AcroRd32.exe.

How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Read in file name + path using command line arguments

Hi guys,
I am trying to use command line arguments to read in the name of two files. The code below works as long as the files are on the class path.
public class cmdLineArguments {
     public static void main(String[] args) {
          String xmlFile1 = args[0];
                String xmlFile2 = args[1];
          System.out.println ("\nXmlFile1: " + args[0] + "\nXmlFile2: " + args[1]);
}I would like to be able to read files that are not on the class path as well by entering their full path along with their names.
In other words, It works if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs file1.xml file2.xmlbut not if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlWould anyone please explain how I can edit the code to make it work? I guess I could take them both as a String, modify them manually (add a \ to it etc) but is there an easier way to do it? Even a reference to a tutorial, article etc about this would be very much appreciated.
Also, any idea why a code would compile and run fine in Eclipse but would create an error from command line?
Thanks a lot.

You need to learn about cmd.exe which is used to process the command line. The arguments passed to any program is the command line split at white space so your command line arguments of
c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlis turned into an array of
"c:\Documents", "and", "Settings\user\desktop\file1.xml", "c:\Documents", "and", "Settings\user\desktop\file2.xml"In other words instead of 2 arguments you actually have 6.
To get round this the file names need to be quoted
java cmdLineArgs "c:\Documents and Settings\user\desktop\file1.xml" "c:\Documents and Settings\user\desktop\file2.xml"

How to Create Test Sequence Document in HTML using command line

How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .Net

If you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Print using command line

Hello experts,
As mentioned in http://support.adobe.com/devsup/devsup.nsf/docs/52080.htm we can use command line instruction to open a pdf file in Acrobat Reader and print it.
Does anyone know if this works both in Windows and in UNIX?
Thank you.
Gie Kian Siauw

Hi Gie,
On Unix, you can use commandline instruction to create ps files from the pdf files.
for eg. "acroread -toPostScript -pairs a.pdf a.ps"
You can also pipe the ps output to a printer.
for eg: "acroread -toPostScript -pairs a.pdf - | lp -d <Printer Name>
This is a headless process of printing pdf files without the launching of acroread.
The file is not opened in the acroread and just printed.
Regards,
Rishi

Can not use 'AT LINE-SELECTION' with SET PF-STATUS

Hi experts,
my code is like below:
PARAMATERS: .....
SET PF-STATUS 'st_nam'.
Perform Load_data . ' For list display
START-OF-SELECTION.
AT LINE-SELECTION.
Perform list_detail.
AT USER-COMMAND.
CALL SCREEN '1001'.
END-OF-SELECTION.
When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
Thaks,
PS: Reward immediately

Hi,
Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
Thanks,

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

Wireless 1130 AP can't use command line

Similar Messages

Maybe you are looking for