Wireless access point no longer working with ios7

Upgraded to ios7 and did not change anything. Wireless access point still recognised in settings however no internet connection possible. What's wrong or different with iOS 7?

1. Turn router or access point off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

Similar Messages

  • D-Link Wireless Access point.  PC works great..Mac is SLOW on internet.

    This has really got me frustrated. I own a hotel and am working to get it set up with a wireless internet connection. I've got a qwest dsl modem going into a D-Link router, and then today added another D-Link access point (actually, the computer tech added the new access point). I needed this additional access point because there were too many dead spots in the hotel with only one D-link.
    The new D-link seems to be working perfectly, for PC users that is. People using a PC laptop can connect to the wireless network and browse the internet at fast speeds. However with my G4 1.33gh Powerbook with Airport Extreme is having problems. I get a very strong airport signal, but internet browsing is crawling along. Some pages work for minutes to load, and some won't load at all.
    The settings for the wireless connection is the same on my mac as they are on the PC. Is there something else I need to change?
    Thanks for any help,
    lw

    Are you plugging it into the keyboard? If so, plug it into one of th USB ports on the back of the mini.

  • Music buttons on the lock screen no longer work with ios7.

    on my 4S, when ios 7 was loaded, bluetooth music play buttons and the music buttons on the lock screen no longer work.  Hence, I can neither use the music buttons at the lock screen nor can I use the control on my car (bluetooth...) to change songs.  Volume adjust at the lock screen appears to work.  Can't pause/play or move to the next/prior music.

    I did see a reply on a similar post:
    You can try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However, some onther users have reported the same problem so it it may be a bug in iOS
    I did the RESET DEVICE only to mine (i.e., did not reset all settings...) and it did work to fix the buttons (haven't tested on the car, but it'll likely be OK now...).  Certainly there is a bug somewhere that needs fixed...

  • S11 flex Bluetooth headset no longer works with ios7

    Unit connects but sound plays through iPhone or iPad. S11 is not available (even though connected) in Airplay Listing. If I hold down  mute button SIRI come on through head set. If I tell SIRI to play play list the playlist plays but music still plays through speakers on iPhone

    I have a similar problem -- iPhone5, when I installed IOS 7 the S11 Motorola HD headset is NOT an option in airplay for the itunes Music player. S11 can be used for calls.  S11 is also NOT an option for Pandora OR TuneIn Radio.  However... I have a big Jambox AND appleTV that BOTH show up as working options on the iphone (thankfully). 
    Here is the kicker -->  The S11 DOES show up as Music player output option on my IOS7 iPad3 !!! It also allows jambox or appleTV as output options.   Seems like the problem lies with Iphone5, bluetooth,IOS7, and the S11 Motorola headset interface. 
    This is a BUG !!!!   Please fix it. 

  • Need some advice for AP IOS upgrade (Wireless Access Point 3702 Series) ?

    Hi to all
    I recently purchase a Wireless Access Point (AIRCAP 3702E-E) with 4 antenna, i will use this device like wifi hotspot in my home.
    I would like to upgrade it but i see two kind of AP IOS :
    Lightweight AP IOS Software
    Autonomous AP IOS
    What are the difference ?
    In case of Lightweight AP IOS Software will be the one to choose, i have multiple IOS :
    Wireless Lan, ap3g2-k9w8-tar.152-4.JB4.tar
    Wireless Lan Recovery, ap3g2-rcvk9w8-tar.152-4.JB4.tar
     Someone can tell me what is the difference between these two versions ?
    Best Regards.
    Elrick.

    Hi Elrick,
    Cisco AP AIRCAP3702E is Cisco enterprise unit.  Cisco small business support WAP4410N, WAP121, WAP321, WAP551, and WAP561 AP. However I will answer your questions.
    Lightweight AP ISO you can use it ONLY if you connect AP to wireless controller
    Autonomous AP ISO for manage and modify AP  by it self not required wireless controller.
    Thanks,
    Moh

  • How to Setup WRITTEN as a wireless access point to work with WRITTEN

    Hi,
    I had a router WRITTEN which was not covering the whole space in my house. I was looking for a N wireless access point or a range extender.
    The shop seller convinced me to buy WRITTEN saying that the Dual N will fix my problem.
    well it did not. The reception in some locations is still poor.
    the same reseller advised me to use the 350N as a wireless access point instead of buying one. The question is how to do it.
    I am thinking about the following:
    1- Have the WRITTEN installed next to the internet modem connect to the modem by cable
    2- in another room have the WRITTEN (approx 20 meters away) not connected by a cable to the WRITTEN 
    3- When using the laptop in the weak reception area, I try to connect wirelessly to WRITTEN which should be also connected wirelessly to the WRITTEN
    Would that be possible. I hope so since there is no way to have a cable connecting the 350N and 610N due to many reasons
    appreciate your help in adance

    I am sorry but the spelling checker repalced my router names to another word
    the correct text is:
    I had a router WRT350N which was not covering the whole space in my house. I was looking for a N wireless access point or a range extender.
    The shop seller convinced me to buy WRT610N saying that the Dual N will fix my problem.
    well it did not. The reception in some locations is still poor.
    the same reseller advised me to use the 350N as a wireless access point instead of buying one. The question is how to do it.
    I am thinking about the following:
    1- Have the WRT610N installed next to the internet modem connect to the modem by cable
    2- in another room have the WRIT350N (approx 20 meters away) not connected by a cable to the WRT610N
    3- When using the laptop in the weak reception area, I try to connect wirelessly to WRT350N which should be also connected wirelessly to the WRT610N
    Would that be possible. I hope so since there is no way to have a cable connecting the 350N and 610N due to many reasons
    appreciate your help in adance

  • IOS 6.0.1 - Problems with certificate based authentication on wireless access point

    Hi all
    We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
    Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure.  The numbers of affected devices increased until all iOS 6.0.1 were affected.
    Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
    "Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
    In the analysis of the issue, it turned out that  the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
    Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
    A comprehensive update to iOS 6.1.3 is currently excluded.
    Does anyone knows this issue? What else can be done (except from updating)?

    I will answer my own question in case it helps anyone else.
    It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
    To Fix I did the following:
    Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW. 
    I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway.  I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
    Created some rues on the firewall to allow...
    - IMAP-SSL (port993) outbound
    - SMTPS (port 465) to yahoo servers outbound
    - tcp port 587 to yahoo servers outbound
    - https to akamai servers
    Most http and https goes through the proxy as it should, BUT...
    It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway.  I suspect there is a bug in the icloud app? 
    Hope this helps someone else.
    -Bo

  • N800 no longer detecting any wireless access point

    The device is working fine couple days ago, then today when I turn it on, the "connection manager" can no longer see any wireless access point. Not only my home network, also
    my neighbor's wlan. My laptop can detect 10 networks
    around my house. I try upgrad my os to the latest version and it is still not working. Is anyone has similar experience ? Is it a hardware problem ? Any advice will be
    welcome.

    It happened to my N800 too just a couple of days ago after I installed a number of applications. I have already removed those applications but the N800 still would not detect the access points that it usually detects with no problem.
    It could not detect the WLAN inside our house even if the N800 was physically sitting on top of the router. It would intermittently detect my neighbor's WLAN (the one which I usually use) but it would not log on to it.
    I tried removing the battery hoping to reset it but nothing changed.
    It also would not connect to my PC via USB. The computer could not detect it. This one happened even before I installed those applications.
    Help!!!!

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • Surface Pro 3 with AIR-AP1042N-N-K9 Wireless Access Point

    I am trying to connect two recently purchased Microsoft Surface Pro 3 windows 8.1 tablets to a cisco AIR-AP1042N-N-K9 (firmware 15.2(4)JA1) wireless access point. The tablet asks for the wlan password then displays 'can't connect to network'. I am able to connect to the AP using other Win 8.1 devices using WPA2-Personal + TKIP. The Surface Pro 3s connect to other wlans using other access points.
    Please would you help.

    Thank you man that *REALLY* worked!
    Regards,
    Stefano.
    pcroak ha scritto:Stefano,The 521 series AP can operate in lightweight or standalone mode. If your AP currently has the lightweight image on it we can convert it using tftp. (I suspect it does, as the part number AIR-LAP indicates lightweight while AIR-AP is typically standalone)The best way to confirm is to check the cdp neighbor details for the AP software version (or login to the AP console and issue a "show version").If the software has "k9w7" in the name, that is standalone. If it has "k9w8" then it is lightweight. When operating in lightweight you will not be able to telnet/ssh or go to the AP web page.To convert your AP to standalone, please follow the procedure found here:http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918-Patrick CroakWireless TAC

  • How do i set up a wireless access point with ny time capsule

    I am using a new Airport Extreme and want to utilize my older TC to create a wireless access point or maybe an aditional router using the same newtwork.  What are the steps to set this up?
    Thanks
    Alamo

    You will first need to perform a Factory Default Reset on the Time Capsule.
    Resetting an AirPort Base Station or Time Capsule FAQ
    Then, temporarily locate it in close proximity (same room or nearby) to the AirPort Extreme.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the tab in the upper left hand corner of the AirPort Utility window that reads Other AirPort Base Stations (1), then click the Time Capsule
    AirPort Utility will take a moment or two to analyze your network, then announce that the TC will be configured to extend your wireless network.
    Enter a name for the TC (you can use the same device name that you used before if you wish) and click Next.
    AirPort Utility will take a another minute or two to configure the TC and then tell you that the setup is complete. Click Done
    At this point, power down the TC and move it to a location that is approximately half the distance from the AirPort Extreme and the area that needs more wireless coverage.....to give the TC a good strong signal to "extend"
    Power up the TC and wait for the green light and then you are all set.

  • Beginner Needs Help with Aironet 1131G Wireless Access Point

    I have a new Cisco Aironet 1131G Wireless Access point.  It is picking up an IP address and I can ping that address.  However, I can't access it via the web-based GUI or the CLI.  I have preformed the reset.  Any suggestions would be greatly appreciated.
    Thanks.

    Hi,
    I cannot access means what?? are you not able to go to CONFIG T prompt from CLI?? and if you are in the same subnet as that of the AP, are you not able to open up the GUI?? if you are not able to then, issue the command "show version" on the AP CLI and see if your image is "RCVKW8" image. if so u need to convert the same to IOS using the below method..
    http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1038660
    lemme know if this answered your question..
    Regards
    Surendra
    ====
    Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Westell 327w and Wireless Access Point

    I had DSL last year, but have since changed to FIOS, which I love.  So I have the Westell 327W modem/router that isn't being used.  I have decided to use it in another project for the 4 port ethernet and the wireless capability.
    As this other project, we are using another service, which isn't DSL.  However, I figured that I could use the 327w as the wireless access point.  I currently have access to the internet through the provided internet service and from there I go into a Cisco ASA 5505 firewall.  From there I run an ethernet cable to the 327w.
    As long as I plug a computer into one of the 4 ethernet ports on the 327w, I'm able to ping to the Internet using either the IP address or using DNS.  I'm able to surf and everything.
    I have also set up the wireless and using WPA security and I'm able to connect a laptop to the wireless.  I get the IP address via DHCP from the ASA, so I have turned off the DHCP server on the 327.  I have also turned off the firewall.  I then test connectivity and I can ping anything on the network that is assigned by the ASA, but when I try to ping to an Internet address, by the address, I get request timed out.  I also don't get anything back on DNS and so forth.
    What do I need to do on the 327 to allow the wireless to work with the current connection set up.
    Thanks for the help and information.

    I got it to work.  What I had to do was to set up the 327w in VLAN mode so that the wireless side would send the packets out the ethernet port to the ASA or another router.
    In fact, I'm writing this on the wireless setting of the 327w.  So setting the VLAN allow the wireless to send and receive packets.

Maybe you are looking for

  • EMac optical drive: Reads but ceased writing.  I get "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR.  Drive is Pioneer DVD-RW DVR-127D.

    eMac optical drive: reads fine but has ceased writing.  One day it's working fine, burning DVDs, then after repeated attempts stops copying and gives the following error message:  "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR".  Drive is Pion

  • Quality Issues

    Hey - So I have iMovie 09 and then found out it has really crappy quality issues. So I came to iMovie 06 to start working with stuff. I decided to try putting in 4 photos and sharing them with iDVD to test it out. I haven't actually burned them but t

  • Failed in Message Mapping for Sender SOAP Adapter

    I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in

  • Opening Word file in Tomcat

    Hi all, I have a table in MS Access database that stored some MS Word documents. Those documents and stored as OLE object type in Access. Now i connected my Tomcat with Access using JSP but the problem is how can i open those word files in a separate

  • Where-used list for queries restricted by characteristic value

    Hi SDN Community I came across this useful documentation on how to track down a query which is restricted to a certain hierarchy Queries that use a hierarchy Is it possible to track down queries from a given characteristic value. eg. ID = 355 from In