Wireless ACS deployment - Patch to v4.2.1.15 patch 8

Dear Team,
We have some of ACS appliance running at v4.2.1.15 patch 3 & I am planning to use the latest available patch to ACS v4.2.1.15 (patch 8)
Can some one give me the step by step how to install the Patch 8.
Thanks ...

Hi Anisha,
There is no error message, the DOS window dissapear and the patch installation never ends.
The only error that can see is when I restart the server and Windows show an error window.
I have read the patch installation Readme and the following point indicates the logs location:
11. The command window will show minimal information on what’s happening. For detailed logs please locate AcsPatchInstall.log in the root folder of . On applying the next patch this log gets overwritten.

Similar Messages

Upgradition ACS 4.2.0.124.16 on appliance 1113 to ACS 4.2.1.15 and then to patch 8(Latest)

Dear Everyone,
we have below softwares in the order to install one by one on the appliance 1113.
1)ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip
(Appliance Management package)
2)ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip
(ACS Software package)
3)applAcs_4.2.1.15.8.zip
(ACS SE 4.2.1.15.8 cumulative patch)
Kindly guide us to take it forward to upgrade by step by step procedure.
( is that same like TFTP to transfer these packeges to appliance or different method? )
(we are using Windows XP system)
Quick suggestion would be useful and appreciated.
Message was edited by: vishweswaran K

TCP Port 8080 is used for the transfer
You start with the management package , then the software package , after that you patch the server.
For more details, check the following link:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.html#wp1165150
Please Don't Forget to rate correct answer

Outdoor wireless mesh deployment for major events

I am interested to hear if anyone here has any experience in setting up a large scale wireless mesh deployment that covers an area that are a few blocks.
1. How do you deal with 2.4ghz interference as 2.4ghz and 5ghz band are unregulated. I'm not able to use 5ghz as the end devices are smartphones that do not support 5ghz.
2. How do you deal with the backhaul capacity as each hop for Cisco Wireless Mesh would result in a 50% drop in network throughput.
3. How do you deal with installation of the wireless mesh APs in public areas. Do you install this on a mast and leverage on the lamp post to provide power? Or do you talk to building owners to install the APs on the top of buildings? What are the challenges you face in installing wireless mesh APs in a public area.

Hi David,
Here is some info that might help.
Mesh 7.0 design guide
http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html
Enterprise Mobility
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob41dg/ch8_MESH.html
1500 Design Guide
http://www.cisco.com/en/US/docs/wireless/technology/mesh/design/guide/MeshAP.pdf
1550
http://www.cisco.com/en/US/docs/wireless/access_point/1550/quick/guide/ap1550qsg.html#wp57699
1500 install guide
http://www.cisco.com/en/US/docs/wireless/access_point/1500/installation/guide/1500_ch2.html
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Features in Patch 6.4 missing from ZCM Patch MGMT 11.2.1.0

We are migrating from Novell ZENworks Patch Mgmt v. 6.4.2.1592 to the ZCM v. 11.2.1.0 patching service. I've noticed that there are are few features in the Patch mgmt 6.4 that I don't see in ZCM 11.2.1.0 and want to see if I'm just missing them somehow. I've looked throught the zen11_pm_administration manual and could not find any info on the following:
1) In Patch 6.4 when looking at the vulnerabilities/patches, you could filter by a specific OS in that it would only show patches (for example) for Windows 7 32bit workstations...and those patch results would only display "patched" or "not patched" numbers for that specific OS. In ZCM 11.2 patch mgmt...it appears that it can only filter by Platform: Windows, Vendor: Microsoft. With this filtering it mixes all the XP, Windows 7 32bit, Windows 7 64 bit, and Windows server patches all together. In the patch name field I can put "Windows 7" but it display 32 and 64 bit as well as patches for servers and includes servers in the numbers for "patched vs not patched". I would like to be able to filter the patches to show for example only patches for Windows 7 64bit workstations and have it reflect the workstations with only Windows 7 64 bit as it does in Patch 6.4. We have ZCM servers in our system but are using a different method to patch them. Basically, I currently have to wade throught the patches for Windows 7 (for example)..select the ones I want..and if that patch also is for Server 2008...I have to make sure that after the deployment creation is completed to remove the servers from the deployment. It would be much easier and efficient to be able to filter out the patches for a specific OS and apply those patches to only that specific OS workstations. Any ideas if this is possible under ZCM 11.2.1.0 patching?
2) In Patch 6.4 you could configure a policy for snooze and reboot options. Then when completing the deployment wizard...you could select "Use policies" for these options. Is there a place to configure these presets in ZCM 11.2.1.0 or does one have to manually change them every time a deployment is created?
3)Once a deployment is set to a group of test workstations, in Patch 6.4 I could export the list of worksations in the test deployment to send to the helpdesk in case they received any calls. Is there an option to do this in ZCM? There doesnt seem to be one.
Any info or feedback would be greatly appreciated.
Thank you,

Michaelstump,
is there a reason you posted in the ZCM *10* patch management forum? At
this time, I agree, some things are better with ZCM patch management,
some things are not...
Shaun Pond

How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4

Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.

Hello Gadewar,
First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
Note you need to have the support account to login to that website.
How ever I am listing down basic steps required for upgrade below.
1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
2) Take backup of the DB.
3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
4) Stop ESO instance and run the setup and then upgrade scripts.
5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
Regards,
Jagjeet Singh
Edited by: ESO123 on Feb 2, 2011 8:54 PM

Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

MainStage patches not loading Guitar Rig 4 patches

I'm trying to use Guitar Rig 4 as a channel strip plugin for live EG performance. Unfortunately Mainstage seems unable to properly recall assigned Guitar Rig patches and/or recall screen mapping for those patches. It seems like it only loads the first GR4 patch. If I open up the plugin I see the correct GR4 plugin name but when I double click it seems to then load.
I've mapped screen controls to specific editable functions within Guitar Rig 4's patch. Unfortunately after reboot Mainstage patches do not properly load Guitar Rig patches and screen control mapping breaks.
For instance within a specific Mainstage patch, I have a Guitar Rig 4 patch that has a stereo delay. I screen map to the stereo delay's controllable functions (mix, feedback, etc). I test it out and everything works properly. I save. I restart and then the screen controls lose their mappings.
So what's up? Is it a user error or a limitation between the two softwares?
Andy

Hi again,
OK so to map a MS toggle switch to activate an event in a Plug-in like Guitar Rig 4?
- You have Pedalboard as an insert in the channel strip?
- You have Guitar Rig as an insert in the channel strip?
- if so
- selecect the unassigned button in Manstage edit mode
- MS will open the screen control inspector panel below the edit view of your MS edit window
- In the third tab 'unassined' of the inspector you sohould see columns make sure you're looking at the left most col
- You will find the name of the channel strip (guitar-1) or something like that - select it
- The next col will fill with info on the channel strip including the inserts - select Guitar Rig 4- The next col will fill with all the attributes of the Guitar Rig patch you've selected as an insert
- The list will contain all the controllable attrubutes of the componants that mack up the guitar rig patch.
- Select the WAH/ON/OFF or what have you.
- Now the switch in MS will control the ON/OFF state of the WAH efect in that Guitar Rig patch.
The same process works for rotary knobs so you can have MS contol the ON/OFF function and allow you to adjust say the Gain and Tone of your choosen Guitar Rig effect. Obviously you can use for Amps/effects/Cabs/and even Tapdeck etc.
Once you have a channel strip set up and your happy with the layout of MS you can save the channel strip and use it in Logic and vise versa - so I have started a library when my guitar and bass patches are channel strips.
This is because I mix up componants of the various Plig-ins I have say - Pedelboard => Ampdesigner => Guitar Rig 4 => Amplitube 3 => and Redwirez as a single 'patch'. So playing live I use the appropriate 'patch' strip in MS and when recording the I use same 'patch' strip in Logic.
Have fun!

The latest core patch SAP ME 5.2 SP05 Patch 17

Hello,
I noticed in sap note 1615904, there are a new core patch delivered. As of now, we just upgraded the patch SAP ME 5.2 SP05 Patch 16 into our test system.
I have a question, can I download this latest core patch directly from the SAP website and implement it into our current system? is there any incompatible issues coming out?
I am a new on the SAP ME 5.2, your answer would be appreciated.
Thanks a lot and best regards,
Leon Lu

Hi Alex,
Thanks for your feedback, actually we are on the phase of testing the SAP ME5.2, before we decide to go forward of this version. From my opinion, we should keep the core patch up-to-date, but as you said, this would be best recommended by SAP. I will try to contact them.
Regards,
Leon Lu

[svn] 3185: Partial patch-acceptance for SDK issue 16312 ( patch was SDK-16528).

Revision: 3185
Author: [email protected]
Date: 2008-09-11 16:03:05 -0700 (Thu, 11 Sep 2008)
Log Message:
Partial patch-acceptance for SDK issue 16312 (patch was SDK-16528).
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16528
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/RadioButton.as

Procedure for update ACS 5.4.0.46.0a with cumulutative patch in large deployment

Hi,
I try to find the info within the CCO website but fail.
All docs I found on the site is Upgrading for 5.3 to 5.4 or 5.4 to 5.5
In my case I would like just apply cumulutative patch to my existing 5.4 running deployment.
5.4.0.46.0a to 5.4.0.46.6
My main concern is I use a large deployment scenario with multiple secondary server and one log collector.
The upgrade procedure mention, de-register all server one by one and change the log collector to be a standalone primary server.
Which cause me more downtime, loss of some logs, ...
For applying patch (update not upgrade), I think I can just use the pacth procedure and leave the setup as it is as I don't upgrade or change the database structure.
Update each server whenever the role he as (secondary, primary, log collector) one by one by just issue the :"acs patch install" command.
Does anyone have a advise or a past experience about update large deployment setup.
Thanks for your help.
Steve

Hi Minakshi,
I perform the update before your post and I test without deregister all server.
So far, all was good.
I had no issue and the update tooks me very less time without following the full UPGRADE procedure.
The command had also a rollback for the update, so I take the risk.
This is certainly not the case for upgrade but update seems to easier.
Kind regards.
Steve

Cisco ACS Deployment

I proposed New ACS 5.4 Appliance - CSACS-1121-K9 and upgrading current ACS 4.1 to ACS 5.4-CSACS-5.4-VM-UP-K9
my customer want to do configuration/databse replication between two ACS. Is it possible to that ACS in VM can work with ACS in appliance ?
thanks
sompoj

There should not be any issues. It will work fine.
ACS distributed deployment.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1058054
ACS 4.x and 5.x replication
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1052580
Regards,
Jatin Katyal
- Do rate helpful posts -

ClassNotFoundException when deploying to WLS with new JDev 11g patch

I installed WLS and patched WLS with the new ADF lib ,installed the new jdev 11g , everything went well
but when I want to deploy an application to the WLS I got this error .
java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:135)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
Truncated. see log file for complete stacktrace
>
I had to comment out listerner-class ientry n the weblogic-application.xml, then it works.
<?xml version = '1.0' encoding = 'windows-1252'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">

<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
</weblogic-application>

Hi,
as read in this thread : Re: Always fail to deploy to server when (Create a Simple EJB Session Bean )
>
This is a known JDeveloper 11g bug. If you look into the packaged EAR file, JDeveloper inserts some entries into the weblogic-application.xml file to register some listeners to perform some internal tasks it needs to deal with.
The issue is that these classes are part of the ADF runtime and installed as part of the provided ADF domain. They are not provided as part of a standard WLS installation. Thus when you deploy a JDeveloper 11g packaged application to a non ADF augmented WLS 10.3 instance, you get a Classloading error on deployment because the specific listener-classes are not available.
The relevant bug # for this is:
BUG#7487416
EAR FILE PACKAGING SETS FIXED DEPENDENCY ON
JPSAPPLICATIONLIFECYCLELISTENER
I believe a fix for this will be provided in the first patchset for JDeveloper 11g.
In the meantime, if you want to workaround it, extract the weblogic-application.xml file from the EAR file, manually remove the listener entries, put the modified file back into the EAR file and then deploy it.
-steve-
>
It solved the problem for me.
But you should now get another problem, like some of us on this forum : ADFLogger will be missing. If so, please report to this thread for helping us : Standalone WLS server instance deployment failure - missing ADFLogger
Regards.
Luc-

Managed iPads Wireless App Deployment

We have several hundered managed iPads we connect to one OSX Maveriks computer via a USB sync cart running Apple Configurator we also have a OSX Maveriks server to manage user accounts.
It is time consuming to have to bring the iPads in to the cart to update an app or install a new one via Apple Configurator. I recently read a whitepapers released in Feb 2014 that depolying apps over the wireless is not possible. However, the whitepapers did not have what was needed ro where to go or how tos on getting this working. Being able to have apps deploy to ipads around the building when they connect to wireless would be a big help. Where can I go to get this setup? All I cna find are whitepapers saying it can be done now, not system requirements and how to go about doing it.
Does this service use a particular IP port? If so I'd need to know all the tech specs this uses over the wireless to get it working.

See if there is something here that helps....
http://www.apple.com/education/it/mdm/

Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

Hello at all.
I'm restoring a 5.3 backup to a new ACS 5.5 patch 3.
Restore procedure works fine but when I restart the server service runtime doesn't restart.
acsuno/admin# sh app stat acs
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running
Process 'runtime'                   not monitored
Process 'ntpd'                      running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running
This is the end of debug log file...
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rt_daemon init failed,RTDaemon.cpp:325
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,ConfigNotificationFlow::waitStart: unable to load configuration: fatal error,RTDaemon.cpp:326
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rc = 4,RTDaemon.cpp:327
Any ideas?
Many thanks.
Regards.
Andrea

Hi,
Manually restart the runtime process from the CLI and rebooting the appliance resolves this issue.
In order to restart the runtime processes manually, issue these commands from the ACS CLI
- acs stop runtime
- acs start runtime

Redundant WLC and ACS deployment

Deployed a project with one WLC 5508, one ACS 1121 and one WCS with 200 APs 1131. Now we required redundency in this design. Is there anyone help me out for this design and configuration.

Hi Muhammad, there are two types of redundancy in the CUWN network. controller and AP redundancy.
since you have only one WLC, the controller redundancy is not possibe. for the lightweight APs, there's automatic self healing from the WLC when one AP goes down. this means that neighbouring APs can detect that one of their neighbors is not alive and they react by transmitting a powerful signal to compensate. I would strongly advise you about strongly deploying a second WLC especially that you have 200 APs. If your WLC crashes, you are out of business for a while !
rate if this helps.

Wireless ACS deployment - Patch to v4.2.1.15 patch 8

Similar Messages

Maybe you are looking for