Wireless Keyboard Page Up and Page Down Help

The wireless keyboard for my iMac omits many common keys found on full size keyboards.
One application I am running (Battlefield 2142) requires the use of "page up" and "page down" among others.
By random effort, in happens that "Control" + "up arrow" worked for "page up".
Does anyone know where I can find a resource showing these built-in key board sequences.
In System Preferences there are the keyboard short cuts that can be configured, but many are missing. The control "up arrow" was not listed here for "Page Up:, nor are others like "Home", "End".
My assumption is that these are not officially considered keyboard short cuts.
Any help, appreciated.
MikeK

Hello
a - this forum is not dedicated to hardware but to the Numbers application.
b - I don't own such a keyboard but, I'm quite sure that the asked info is available on your machine.
Apple menu > System Preferences
open the prefPane named Keyboard and Mouse
click on the tab named "Keyboard Shortcuts"
You will get a list of many shortcuts descriptions.
I assumes that the wanted ones are available in this list.
Are you sure that the response is not available in the manual delivered with the keyboard?
Yvan KOENIG (from FRANCE lundi 21 janvier 2008 19:30:51)

Similar Messages

Page up and page down keyboard commands

I just installed CS4 on my laptop. The page up and page down keyboard shortcuts are not responding. That's a big handicap. I know these are default commands to go to edit points. Do I need to to go somewhere in preferences to check for defualt commands. I have been using earlier versions of CS for some time and I don't remember having to do anything like that previously. It seems logical to me that I must be overlooking something simple. Thanks in advance for any insight.

Thank you Bill. I have tried that about as many ways
as a person can. Its just a dead key response. Since I just started on CS4, I could use some tutorials on this. Do you have any links for free tutorials?
thanks in advance for your help
Judy

Page Up and Page Down keys don't work Apple Aluminum Wired Keyboard MB110LL/A

I have a keyboard with page up and page down keys (along with home, end and arrow keys). These keys don't do nothing.
How can I enable the use of such keys?

See also:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=640587 Bug 640587] - Page up/down behaviour changes to "page back/forward"
''(please do not comment in bug reports; you can register and vote instead)''

CS5.5 Trial Page Up and Page Down Not Working

I'm working in CS5.5 and the shortcut keys Page Up and Page Down are not working. I have the standard seting EDIT > KEYBOARD SHORTCUTS > Go to Next Edit Point = Page Down Id. Page Up.
The HOME and END keys are working.
Any tips on how I can get this working?
Thanks.

Yes. I just discovered tha trick.
You're saying the tracks have to be "highlighted", clicked on to target a track.
I'm not one to ever complain about flexibility.
So how does targeting tracks also work when "respond[ing] to the Next/Previous Edit commands"?
There is a trick when editing that by only selecting one or more tracks will help the process?
How would you use this feature?
Thanks.

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Page up and page down in ALV

Hi all ,
Page up and page down are not working automatically in my ALV Grid report. I have all set in my pf-status. Do i need to explicitly write any code for that or do i need to any setting for that plz let me know .
regards
rao

Hi,
i hope the problem is with the Pf-status,so try to do the following and see...
Go to SE41 give the Program name SAPLKKBL
and status as STANDARD
now click Copy status (CTRL+F6), now give your Program name , and PF-status and copy it. now save it and activate the pf-satus which you have copied. and use it in your PF-status form.pass that status using the parameter call back status option.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
i_callback_pf_status_set = 'STATUS'
i_callback_user_command = 'USER_COMMAND'
2.
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
*- Pf status
SET PF-STATUS 'STATUS' excluding p_extab.
"this is i copied it from standard program
ENDFORM. " STATUS
now check it.
Regards
vijay

Suggestion: page up and page down

Am I the only one who'd like it if the default behavior for the Page Up and Page Down keys while editing in Keynote was to change slides? Right now, I usually hit them after editing in a text box or clicking on a slide in the Slides pane. In either case, they don't advance or back up the slide. In the former case, they don't do anything. In the latter case, they page up in the Slides pane, but this isn't useful 99% of the time.
Just my $0.02.
MkIV

Go to >Tools>Options>Advanced and uncheck the "Use Autoscrolling" and "Always use the cursor keys to navigate..."
That worked for me.

I am unable to control page up and page down in JdbTextField

I am unable to control page up and page down keys in JdbTextField if I press these keys in that field, above that I have one table(jdbTable) the focus going to the table through the rows and when I page up/down.

If you close all the windows and quit word, next time you restart, DO NOT check "Reopen windows on login".
Also, check your login items for your user account.

How to write code for page up and page down buttons on alv screen?

Hi,
Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n) these are enabled and working properly, but we can't debug this with /h
How to write code for page up and page down buttons on alv screen?

Poonam,
On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
module cc_display.
fcode = sy-ucomm(4).
case sy-ucomm(4).
    when 'P--'.
      perform cc_firstpage.
    when 'P-'.
      perform cc_prevpage.
    when 'P+'.
      perform cc_nextpage.
    when 'P++'.
      perform cc_lastpage.
    when 'EX--'.
      perform cc_firstcopy.
    when 'EX-'.
      perform cc_prevcopy.
    when 'EX+'.
      perform cc_nextcopy.
    when 'EX++'.
      perform cc_lastcopy.
I guess it can give you some lead.
K.Kiran.

Page up and page down does not work, it works in internet explora

page up and page down does not work @www.hkej.com/template/landing/jsp/main.jsp
it works when using internet explora

Go to >Tools>Options>Advanced and uncheck the "Use Autoscrolling" and "Always use the cursor keys to navigate..."
That worked for me.

Slow Macbook pro, ~1 year old; Really HUGE Page Ins and Page Outs size, think 400 GB In vs 100 GB Out

Hi everyone, I have a macbook pro and it's so slow. After scouring the internet a lot, and CCleaning my computer 359802 times and using Onyx, I finally realized why it's so s low.....my Page Ins and Page Outs are so big. I have attached a screenshot that illustrates this.
I am not sure how my computer ballooned to this size, but it makes sense why it's like a turtle and is slower than my 4 year old Sony.
Can someone help me?? I am not sure what processes to get rid of and I feel like Google Chrome is taking up huge amounts of my Ram. I mean yeah I open Google Chrome and run like 8 tabs and have Word and iTunes open, but my 4 years old Sony could run faster than this and I used to open like 12+ tabs on Chrome while running Word, Excel, Powerpoint, iTunes, and VLC on my Sony. Which was nowhere near as powerful as this computer. Supposedly.
My computer Specs are:
2.3 GHz Intel Core i5
4 GB 1333 MHz DDR3 RAM
Intel HD Graphics 384 MB
Mac OS X Lion 10.7.4
I would really appreciate any advice to get this down to normal.....since I hear most ppl have page ins and page outs in the MB or even KB. Right now I'm running Google Chrome, Word, Ppowerpoint, iTunes, and Adobe PDF Reader. I don't think this should be too unreasonable of work load.
Thank you

The problem is not that your page ins are big, as that value resets when you reboot the system. However, your page outs are are almost 25% of your page ins, which means you can use more memory for the applications you run. A page out is done when memory is full, and the system needs to add something else to memory, so it writes some memory to the hard drive to make room. The guideline to add more memory is 10% to 15% page outs greater than page in's, and yours are more than that.
Your MacBook Pro can handle up to 16GB of memory. You might want to consider upgrading to 8GB, which would double what you have today. OWC and Crucial are two sources for quality memory. $42 for 8GB from Crucial, and you can usually find a % off coupon on retailmenot.com.

Control the page height and page width of pdf report using pasta_pdf.cfg

Hi All,
I've followed the note: 338990.1 (how to print publisher PDF reports via the concurrent manager) in metalink to print a PDF REPORT. Everything work fine except the page height and page width is used as default (8X11). Is there anyway that i can custom page height and page width size such as: legal (8.5X14).
current set up in pasta_pdf.cfg
[DEFAULT]
%% ============== Preprocessing Command ==================== %%
% Pasta can use a preprocessing command to invoke any executable
% that supports an input file and an output file (a filter program).
% You can use redirection. Pasta will invoke the filter program
% to preprocess the Pasta output before passing it to the printing
% command. By using the preprocess option, you can generate output
% formats other than the formats Pasta currently supports. For
% example, you can generate PCL output.
% You can use {infile} and {outfile} in this option.
% {infile} is the output file generated by Pasta. You can use
% it as input for the preprocessing command. It is a temporary
% file and will be deleted after being passed to the
% preprocessing command. {outfile} is the output file generated
% by the preprocessing command. Pasta names it temporarily and
% it will be deleted after being passed to the printing command.
% If you want to keep it, you can name it by using the '-o'
% command line option. Pasta will copy {outfile} to the file you
% specify.
% Preprocess for PDF output
% This is an example for PDF output to print.
; Xpdf
preprocess=/usr/local/bin/pdftops {infile} {outfile}
; Ghost Script
; preprocess=pdf2ps {infile} {outfile}
; Acrobat
; preprocess=acroread -toPostScript -pairs {infile} {outfile}
%% ============== Printing Command ========================= %%
% You can specify the printing command and options you want
% to use to print your report. Pasta will pass the final output
% to this command. {printername} will be replaced by the
% actual printer name passed through the command line option
% (-pn), so in most cases you don't have to change these
% options.
% for UNIX platform
printCommand=lp -c -d{printername}
% for Windows platform
ntPrintCommand=print /D:{printername}
%% ============== Error Log File =========================== %%
% This tells Pasta to create a log file. The default error
% output is stderr.
;errorlogfile=pasta.log
NOTE: pasta version 3.0.4
form server 6.0.8.27.0
third party tool is pdftops
Thanks
Kevin

i think that can be down from the printing direver/styles/prt files when you added the printer at your apps system check the follwoign for more info.
( How to Implement Printing for Oracle Applications: Getting Started )
Note:269129.1
(Step By Step Guide to Set Up a Printer in Oracle Applications)
( Note:60936.1)
fadi
http://oracle-magic.blogspot.com

Wireless keyboard keeps disconnecting and reconnecting

My Wireless Keyboard keeps disconnecting and reconnecting and typing by it self!! any ideas?

Hi,
Yes believe it or not my problem was caused by the keyboard being too close to the iMac display, the bluetooth was infering with the other radio signals coming from the antenna, it needs to be at least 1ft away from the display (30cm) to prevent this (this won't help those of you with small computer tables/desks)
Hope this works for you....
iDave

Page URL and Page Name in Enterprise Wiki

Hello,
I have a problem with the page URL and page name in our Enterprise Wiki. Parent and subsite locales are Turkish. My problem is, when I add a page in Enterprise Wiki and give it an English URL, the page Header is written in English and when I give a Turkish
URL, the page header is written in Turkish. What I want to have (and I think the right way) is to have the URL in English and the page header in Turkish.
To clarify my question, I will create a page with a Turkish name and URL. I will name it "Türkçe Tanıtım" (which stands for Turkish Demonstration), using Turkish characters. Then the URL becomes:
http://mysite.com/Pages/T%C3%BCrk%C3%A7e%20Tan%C4%B1t%C4%B1m.aspx
And the page header is "Türkçe Tanıtım", which is normal, as expected:
If I change the page URL to look correctly, using English characters only, it looks like "TurkceTanitim." The URL becomes "tidy" (http://mysite.com/Pages/TurkceTanitim.aspx) but the page header also becomes "TurkceTanitim",
which is not correct in Turkish:
What I would like to have, and what I think it should, is to have a URL completely in English (http://mysite.com/Pages/TurkceTanitim.aspx) but have the page header in Turkish (Türkçe Tanıtım). I am sure this could be done in SharePoint, I/we are missing
something but I don't know what.
Can you give me a hand on this?
Thanks in advance,
Tolga

Hi Tolga,
I understand you would like to change Wiki page title but not page name in url.
The title of the Wiki pages is always linked to the actual file name of that certain page. To get the use out of title property we have to manipulate the page template for the Wiki pages.
Please refer to the article below and edit "/_catalogs/masterpage/EnterpriseWiki.aspx" in SharePoint Designer:
http://social.technet.microsoft.com/wiki/contents/articles/17557.sharepoint-2013-change-page-title-in-wiki-sites.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Adding javascript to page open and page close in acrobat 8.1.2

Reading the Acrobat Javascript Object Specification on page 22 it says that you can add javascript to the "page open" and "page close" events of a document.
It then says that under the menu "Document -> Set page action" you can add scripts for those events
I am using Acrobat 8.1.2 and under the document menu there is no "Set page action". And there is nowhere where I can find any "set page action" menu...
whats the deal?
How can i set the page open and page close events in acrobat professional 8.1.2?????????????
Marc

- open the Navigation Panel 'Pages'
- select the page and open the page properties
- in the actions tab you can set the page actions

Wireless Keyboard Page Up and Page Down Help

Similar Messages

Maybe you are looking for