Wireless mwirelessouse requires multiple clicks to open or maneuver around my iMAC. Tried new Magic Mouse still the same!
wireless mouse requires multiple clicks to open or maneuver around my iMAC. Tried new Magic Mouse still the same!
wireless mouse requires multiple clicks to open or maneuver around my iMAC. Tried new Magic Mouse still the same!
Similar Messages
-
When I want to use only my laptop without the apple magic mouse, how do I disable the mouse so that the trackpad works?
Hi, thanks for your answer,
No, I connected the midi-in from the blofeld to midi-out from the virus. I was told to do so by the guy who sold me the ultralite mk3.
I made some tests before getting the ultralite... I used the Virus soundcard as audio device and I could control the blofeld. But I had to link my monitor to the Blofed Out... then I wasn't able to listent to the Virus. But this way I could play the Blofeld in Logic (but couldn't see any midi data and when I bounced I had no sound)
That's the main reason I decided to buy an external audio device (to be able to play both the Virus and the Blofeld)
But I think the way I connected Blofeld to Virus is right because I can see the light which means it receives midi data.
I think it's more about how to set it within logic...
And the Blofeld only gets one Midi connection: Midi In
Both my Virus and Blofeld are also connected to my MacPro via USB, that's the reason I didn't connect the synths to the ultralite via midi...
thanks for you help! I'm getting crazy lol -
I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?
You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter -
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse
Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering. -
Very slow performance
Even after shutting it down and restarting still the same.
Laggin a lot
Please help!!!First, back up all data immediately, as your boot drive might be failing.
A possible cause of a slow user interface is a large set of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
Another possible cause is iCloud activity, especially Photo Stream synchronization. If applicable, uncheck all boxes in the iCloud preference pane and see whether there's an improvement.
Otherwise take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Select the 50 or so most recent entries in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I cannot open a movie in my e-mail and it is from the same phone that I opened one from earlier.
Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave -
I can't open my fb,games in my iphone 4s i already reset my phone still the same help!
I can't open my fb,games etc. in my iphone4s i already reset my phone still the same help!
Most FaceBook games require Flash, which is not available on iOS devices. Check the App Store to see if the games you play are available as iOS apps. Many are.
-
My facebook app crashes as i open it. I ave rebootes the system on my iphone still no use. I also uninstalled the app and put a new one but its the same. Please advice . Using iphone 5 Nd ios7.0.3
doesn't matter what iphone you have, the issue isn't your phone, but with facebook, either contact the app devloper or look at their support site to troubleshoot. Or leave them a review stating your issue.
-
I go to google. I type in "plants". A lot of sites will pop up in google. I click on a site (does not matter which usually). The site will then start to switch to a new url from (click kick, morsearch, etc) turning into a new search engine with the same topic and more options. I never get to the page I want unless I type the url directly into the address box. It always comes back with a search engine. So far I have found this only happens while starting in a search engine. When I get into the actual page, everything is fine. I am using McAfee for security and it hasn't caught a virus or anything yet. Help please! Thanks!
Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. <br />'''''(Not all programs detect the same Malware.)'''''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
SuperAntispyware - [http://www.superantispyware.com/] <br />
AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
[http://www.spywarewarrior.com/index.php] <br />
[http://forum.aumha.org/] <br />
[http://www.spywareinfoforum.com/] <br />
[http://bleepingcomputer.com] -
I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.
You cannot connect the mouse. This is not a feature of iphone
You can learn about connecting a keyboard in the manual:
iPhone User Guide (For iOS 5.0 Software) -
Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?
Thanks Gary, I think I should have mentioned that I have wired my other speakers and it works fine.
I just wanted to go wireless when presenting in front of class, simply to avoid trailing wires from the macbook which I position in front of me on a desk next to the projector and the speakers are behind me next to the screen.
I have struggled to find a solution, and reading through other discussions it is a problem that perhaps only Apple can solve.
I hope the new 'Yosemite' will resolve the problem.
Thank you once again for your reply. -
When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?
I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1) -
Using Adobe 11 reader, now comes up with an error, once file is opened. 'Invalid plugin detected, Adobe reader will quit. Closes the program so cannot view PDF files. Running windows 7. I have uninstalled and re-installed Adobe still the same. HELP
Sounds like something has been added into the Reader folder. I would recommend uninstalling, running http://labs.adobe.com/downloads/acrobatcleaner.html, removing any left over parts of the Reader folder (this might have been the problem), reboot, and reinstall. Hopefully that solves the problem. For future question about Reader, you should consider asking in the Reader forum, this is not it.
Maybe you are looking for
-
Update routine for 0proc_unit conversion
Hi all, My infoobject 0OPR_ACTWRK uses 0PROC_UNIT for units. It holds data in days and in hours. When I load it to a cube, I want to convert all values to working hours. I figured out that I have to use an update routine in my update rules. A lot of
-
File Receiver channel, Append issue on Linux FTP server
Hi, I have a File_ReceiverChannel_FTP_Order that is using the File Content Conversion message protocol. I have setup the adapter to use File Construction Mode Append When I run this on a windows FTP server, it is working as designed. But when Im
-
I am going to be switching from my older iphone to the 5, and I'm wondering if my text messages can be transferred over?
-
Capacity Requirement in each capacity category
Hi experts, I have some queries about capacity category in project as follow scenario: 1. I have a work center NLE0001 including 2 capacity category that are PERSON and MACHINE. 2. Then I assign this work center to a internal activity in PS. In detai
-
How to start in business intelligence?
i'm new to business intelligence. i need to learn about it and develope business intelligence application. from what should i start? is there any tutorial or lessons, which i can follow and learn it. help me.