Wireless NET install. Can't load USB

I'm pulling my hair out trying to load rt2870sta and recognize my Belkin USB wireless N stick. It uses the rt2870sta module, I know for sure for I've used ndiswrapper in ubuntu to accomplish the same, but I cannot figure out how to set up the wireless connection during Arch setup.
Any ideas? I followed the wiki but it isn't recognizing my adapter.
Thanks!

Ok I finally got it working by compiling the driver with the line "{USB_DEVICE(0x050d,0x935a)}, /* Belkin F6D4050 */" in the usb_main_dev.c
Now the module recognizes my device but when I go to DHCPCD it stops at "waiting for carrier" and then times out. I am connecting to the correct SSID and everything. I should note that the drivers that come with the stick work through ndiswrapper but they crap out after awhile so I'm trying to use the native ones from the ralink website.
HELP!

Similar Messages

Wireless LAN driver can't load after BIOS update NB550D

Hi
I have a new NB550D and have jst installed the recommended BIOS update. Now the Wireless LAN driver can't load (error code 31).
I tried installing the lestest driver off the Toshiba website but it still can't be loaded by Windows...
Everything was fine before this! Any ideas?

> In the Device Manager the Atheros Wireless is shown
This means that the Wlan driver was installed properly and the issue could be related to configuration between Wlan card and Wlan router.
You should check if the notebook can connect to Wlan router without the usage of any encryption settings.
Disable the WEP/WPA encryption and test the connectivity. Of course this should be done only for test attempts.
Are you sure that the Wlan is enabled? Enable this using FN + F8

Can't load usb printer driver

can't load usb printer driver

Hi...
If you are trying to load from an optical disc, try downloading the driver from the printer manufactures website instead. Make sure and check for the appropriate model number.

CD Install: Can't load tod module

Seems like it only happens on Sun Fire Server.
I am using hyperterminal for the installation.
This is the error message I keep getting:
Executing last command: boot cdrom
Boot device: /pci@1f,0/ide@d/cdrom@3,0:f File and args:
SunOS Release 5.8 Version Generic_108528-11 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
(Can't load tod module) Program terminated
ok
Any suggestion would be appreciated.
Thanks

Hi
I've only seen this on Netra servers. The problem is down to the hardware revision of Solaris that
you are using and the processor speed on the host.
You need to use an "Operating Environment" CD that should have come with your server if you
are building the server with an early version of Solaris 8. Use this CD first to "boot cdrom", it will then ask you for some basic info after which, it will prompt you for the original Solaris CDs that you have.
Probably the best solution ( and you don't have to use the Operating Environment CD) is to use the last revision of Solaris 8 which I think is 2/02.
regards

MBP early 2009 with lion installed can't load AHT!

My MBP early 2009 is crashing often--just seizing up, and mostly when I'm using wi-fi and then when I move the machine.
My theory is a bad wireless card. I'd therefore like to perform the Apple Hardware Test to see.
Sadly, I can't seem to find the right protocol to run it.
I don't have the original install discs that came with the machine, but I have tried using the install disc from an old iMac that has the AHT on it.
but that's not working
any ideas?
my MBP has Lion installed on it, by the way
thanks!
--frustrated in dallas

(blush)
I think I misspoke as to which version of MBP I have. I think I have a late 2008 MBP instead.
Does that make a difference? I notice on the manual that came with this version (assuming I know which version I have) that I need only push "D" and AHT will load. I'm about to try that.

Boot Camp problem: Windows install can't "see" USB keyboard

I just got my new iMac quad-core i5 and love it.
I tried using Boot Camp to install a copy of Windows XP, just see how it would run.
The installation went fine, until under Windows Setup I have to hit ENTER. Keep in mind, I'm using the old USB keyboard from my G5, which accepted commands up to that point; not the wireless keyboard/mouse that came with the iMac.
Nothing happens, and I have to do a hard reboot to get back out.
Any suggestions? Thanks...

Macaby wrote:
First of all, I have the new 21.5" iMac (also with the wireless keyboard). I did the "Bootcamp" gig with Windows 7 WITHOUT any trouble with the wireless keyboard. Why don't you try it with the standard wireless keyboard?
After about a day of using the wireless keyboard, I plugged in a Logitech keyboard and mouse because I use the extended features (numbers) for data entry. I've asked Santa for a Mac extended keyboard as I'm not that happy about the Logitech although it works fine on the Windows side.
I should add that I used the Magic Mouse as well installing Win 7 in BootCamp. Last night I installed the new Parallels 5.0 on my MB and like it so well that I would like to have it on my iMac as well. However, I've read that there are problems having both BootCamp and Parallels 5 on the same hard drive.

Can't install from net-install usb image with ppp on eee

Hi forum,
l downloaded the latest net-install image for usb, set that up and booted into my 900a EEE and ran /arch/setup. I skipped the network part and setup ppp with a usb-serial cable and ran pon <isp> to connect. Selected the mirror and so on until I clicked on Select Package. "Pacman prep failed" it said, look at tty7. There it said "failed retrieving file core.db.gz from <mirror>"..."transient resolver failure". So I clicked OK, and it put me in a window where it said "Package selection is split into two stages etc" OK. Now I was put in a window where it said "Select Package Group DO NOT DESELECT" and there was this "[*] base ^", selected. I did not deselect. OK. Here I was dropped to the prompt with the message
ERROR: ask_checklist makes sense if you specify 1 thing (tag, item and ON/OFF switch)
I've gone through the process several times, choosing 4 different mirrors, and deselecting that thing that said, DO NOT DESELECT with the same outcome.
Can someone please help? Is there perhaps a min speed at which net-install won't work? I'm way down there at ~3 kb/s.
Buce

HI.Tried the link above production premium is only available in French and German no English files.
BUT I got it right.
MAIN PROBLEM:ENCORE didn't want to burn,write,create folder or image.Not the DVD writer error.
If you have tried everything else suggested THEN:
Adobe forum: uninstall and re-install. ONE slight problem not mentioned any uninstalling or format of PC or adobe software.YOU MUST DEACTIVATE the product first.
1. Deactivate and un-install all cs6
2. Download and use the adobe cleaner Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Point 3 and choose OS-Run it .
3.Clean all
4.Run disk and system file clean up.Restart PC.
5.Let system clean run. Once logged in. Run CC cleaner again. BUT NOW select clean adobe credentials.
6.Restart again.
7.Insert your CS6 production premium disc and TADA! It worked for me.
If this doesn't work go to adobe,sign in,choose a certain product premiere,after effects etc, choose installing or activation, and click contact us. There should be an option of CHAT to us not just the search forum.
Explain that you can't install from disc and ask to see your license and serial number if it can be deactivated and then try activate again.
Not the most elegant but efficient for me. I spent 2 days on this searching,phoning, chatting, restarting
YET I'm still stuck by ENCORE not burning to disc LOL! So actually was all in vain but atleast if you have bad disc and serial number issues this could shed some like.
Thanks for all who helped

No Broadcom wireless driver in net install ISO?

I downloaded the net install ISO and booted only to find that there's no driver for my wireless adapter? A NET INSTALL ISO without a driver for a very FREQUENT wireless device in a lot of laptops (Broadcom BCM4312)? Come on!
Don't get me wrong, this is not just a rant, nor a flame, I've been using Arch for a couple of months on my desktop and it's great. But, it's really disappointing to find that I can't even install it on my laptop.
Considering it's a net install image, I really think you should include network drivers for at least the more popular adapters, my Broadcom certainly isn't anything esoteric.
Last edited by yu_raider (2009-10-31 21:42:23)

There is no official Arch package for the wl driver, therfore there is no package to include on the ISO. If you want the devs to change this, post a feature request in the bugtracker - they generally don't read forum posts.
While you're waiting... you mentioned a desktop. Why not reach around the back of it, unplug the network cable, stick it into your laptop, do the net install, and the broadcom-wl install. Then unplug the cable, put it back in the desktop where it belongs.... and be happy.

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

A 2003 MS office sounds like a Windows version. A 2004 MS Office that was Mac compatible can not be run natively on a new MBA since the Lions do not run PPC applications. You will have to get a newer edition of MS Office that is compatible with your new MBA.
Ciao.

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

[Sloved] Can't load wl module for b43 wireless card

I'm trying to run b43 on my arch.
But i can't load wl module.
Below i put output from my broadcom-wl installation
My installaction stucks on modprobe wl. This command does not stop.
Ps: I forgot to tell that i must install kernel 3.10
testing/linux 3.10.1-1 (base) [installed]
core/linux 3.9.9-1 (base) [installed: 3.10.1-1]
and system don't want to turn off.
what logs will be helpful?
How to check which kernel is run?
[skoczo@localhost broadcom-wl]$ sudo pacman -R broadcom-wl
checking dependencies...
Packages (1): broadcom-wl-5.100.82.112-13
Total Removed Size: 1.07 MiB
:: Do you want to remove these packages? [Y/n]
(1/1) removing broadcom-wl [############################] 100%
[skoczo@localhost broadcom-wl]$ makepkg -f
==> Making package: broadcom-wl 5.100.82.112-13 (Mon Jul 15 21:32:50 CEST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found hybrid-portsrc_x86_32-v5_100_82_112.tar.gz
-> Found modprobe.d
-> Found license.patch
-> Found linux-recent.patch
==> Validating source files with sha1sums...
hybrid-portsrc_x86_32-v5_100_82_112.tar.gz ... Passed
modprobe.d ... Passed
license.patch ... Passed
linux-recent.patch ... Passed
==> Extracting sources...
-> Extracting hybrid-portsrc_x86_32-v5_100_82_112.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
patching file Makefile
patching file src/include/bcmutils.h
patching file src/wl/sys/wl_cfg80211.c
patching file src/wl/sys/wl_iw.h
patching file src/wl/sys/wl_linux.c
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 244 (offset 4 lines).
make: Entering directory `/usr/src/linux-3.10.1-1-ARCH'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/shared/linux_osl.o
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/wl/sys/wl_linux.o
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/wl/sys/wl_cfg80211.o
LD [M] /home/skoczo/Pobrane/broadcom-wl/src/wl.o
Building modules, stage 2.
CFG80211 API is prefered for this kernel version
Using CFG80211 API
MODPOST 1 modules
LD [M] /home/skoczo/Pobrane/broadcom-wl/src/wl.ko
make: Leaving directory `/usr/src/linux-3.10.1-1-ARCH'
==> Entering fakeroot environment...
==> Starting package()...
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "broadcom-wl"...
-> Generating .PKGINFO file...
-> Adding install file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: broadcom-wl 5.100.82.112-13 (Mon Jul 15 21:33:05 CEST 2013)
[skoczo@localhost broadcom-wl]$ su
Password:
[root@localhost broadcom-wl]# pacman -U broadcom-wl-5.100.82.112-13-i686.pkg.tar.xz
loading packages...
resolving dependencies...
looking for inter-conflicts...
Packages (1): broadcom-wl-5.100.82.112-13
Total Installed Size: 1.07 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [############################] 100%
(1/1) checking package integrity [############################] 100%
(1/1) loading package files [############################] 100%
(1/1) checking for file conflicts [############################] 100%
(1/1) checking available disk space [############################] 100%
(1/1) installing broadcom-wl [############################] 100%
[root@localhost broadcom-wl]# pacman -Ss broadcom
extra/bluez-firmware 1.2-7
Firmwares for Broadcom BCM203x and STLC2300 Bluetooth chips
[root@localhost broadcom-wl]# pacman -Q broadcom
error: package 'broadcom' was not found
[root@localhost broadcom-wl]# pacman -Q wl
error: package 'wl' was not found
[root@localhost broadcom-wl]# modprobe wl
_______STUCK__________
Last edited by skoczo (2013-07-16 17:49:53)

lspci -nn
0:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
04:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
0f:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
0f:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
0f:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
0f:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
lsmod
Module Size Used by
joydev 7339 0
iTCO_wdt 4471 0
iTCO_vendor_support 1545 1 iTCO_wdt
pcmcia 40181 0
snd_hda_codec_realtek 30689 1
wl 2427712 1
acer_wmi 21383 0
mperf 991 0
sparse_keymap 2582 1 acer_wmi
uvcvideo 63657 0
coretemp 4926 0
tg3 139344 0
videobuf2_vmalloc 2604 1 uvcvideo
microcode 9872 0
videobuf2_memops 1683 1 videobuf2_vmalloc
videobuf2_core 24309 1 uvcvideo
ptp 6844 1 tg3
pcspkr 1487 0
i915 509478 2
psmouse 85971 0
pps_core 7728 1 ptp
videodev 84340 2 uvcvideo,videobuf2_core
libphy 17299 1 tg3
lib80211 3037 1 wl
media 8577 2 uvcvideo,videodev
cfg80211 339155 1 wl
snd_hda_intel 29956 0
rfkill 12682 2 cfg80211,acer_wmi
evdev 7528 11
serio_raw 3969 0
i2c_i801 9873 0
of_i2c 1774 1 i2c_i801
wmi 7099 1 acer_wmi
snd_hda_codec 126979 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
yenta_socket 30036 0
snd_pcm 63876 2 snd_hda_codec,snd_hda_intel
pcmcia_rsrc 9064 1 yenta_socket
pcmcia_core 11892 3 pcmcia,pcmcia_rsrc,yenta_socket
snd_page_alloc 5974 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44383 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
nsc_ircc 12533 0
soundcore 4386 1 snd
lpc_ich 11197 0
irda 88855 1 nsc_ircc
crc_ccitt 1095 1 irda
drm_kms_helper 31518 1 i915
ac 2668 0
thermal 7144 0
drm 186917 3 i915,drm_kms_helper
video 10027 2 i915,acer_wmi
i2c_algo_bit 4583 1 i915
i2c_core 19967 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,of_i2c,videodev
intel_agp 8720 1 i915
intel_gtt 10172 3 i915,intel_agp
agpgart 22047 3 drm,intel_agp,intel_gtt
battery 5557 0
button 3685 1 i915
processor 24819 1
ext4 413470 2
crc16 1091 1 ext4
mbcache 4290 1 ext4
jbd2 68896 1 ext4
sr_mod 13055 0
cdrom 29900 1 sr_mod
sd_mod 28214 4
ata_generic 2434 0
pata_acpi 2367 0
ata_piix 20824 3
libata 149195 3 pata_acpi,ata_generic,ata_piix
scsi_mod 108388 3 libata,sd_mod,sr_mod
sdhci_pci 9751 0
sdhci 25111 1 sdhci_pci
tifm_7xx1 4253 0
firewire_ohci 27494 0
mmc_core 85568 2 sdhci,sdhci_pci
tifm_core 3865 1 tifm_7xx1
firewire_core 44439 1 firewire_ohci
crc_itu_t 1095 1 firewire_core
ehci_pci 3404 0
uhci_hcd 21448 0
ehci_hcd 42520 1 ehci_pci
usbcore 151915 4 uhci_hcd,uvcvideo,ehci_hcd,ehci_pci
usb_common 1172 1 usbcore
pacman -Qs broad
local/broadcom-wl 5.100.82.112-13
Broadcom 802.11abgn hybrid Linux networking device driver
local/mobile-broadband-provider-info 20120614-1
Network Management daemon
local/modemmanager 0.7.991-1
Mobile broadband modem management service
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN mode DEFAULT qlen 8
link/irda 00:00:00:00 brd ff:ff:ff:ff
3: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 00:1d:72:2a:a7:45 brd ff:ff:ff:ff:ff:ff
uname -a
Linux localhost 3.10.1-1-ARCH #1 SMP PREEMPT Sun Jul 14 11:47:37 CEST 2013 i686 GNU/Linux

HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
John

G710 Windows 7 Pro x64 Bluetooth + Wireless driver install errors (can't install)

Hi all,
I've recently just purchased the G710 i3 model as a birthday gift for my dad. It originally came with Windows 8 installed but my father prefers Windows 7 so I've installed this on a SSD (replacing the 1TB drive).
After updating Windows 7 Professional x64 with updates via ethernet I started to install all the drivers in the following order:
note: downloaded x64 drivers (for obvious reasons)
chipset
graphics (intel hd4600 first followed by nvidia gt 720m)
NIC LAN
Audio
Bluetooth and Wireless (won't work - see below for errors)
Touchpad
Card Reader
Webcam
Intel Management Engine (ME)
Intel Rapid Storage Technology Driver (RST)
BatteryCare (replacing the Lenovo Energy Management)
I've downloaded all from the Lenovo web site except up to date Chipset, ME and RST from Intel.
All drivers except for the Bluetooth and Wireless have installed fine. All Fn keys work except for the "Airplane Mode" (guessing due to the driver not being installed).
These are the following errors I get:
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error01.png~original
after clicking on OK ... I get the following
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error02.png~original
after clicking on OK ... there is another message displayed in the CMD window directly underneath the 1st one which is exactly the same text. Both windows then immediately close.
I tried the 32 bit version of the driver and got exactly the same result.
Can this be fixed so it can work? I'm hoping it's not just me.
Thanks for any help in advance, Pete

hi pete_agreatguy,
Welcome to Lenovo Community Forums!
The extraction maybe looking at a missing folder.
When you downloaded the driver
WLAN and Bluetooth Driver (Intel, Broadcom, Qualcomm) for 64-bit Windows
When you doubleclick it it should pop up a winodw where you hit next , agree then it shows a page where you can see a box with a browse button. can you share if you are getting that?
like this:
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can't load itunes on windows 7. Received Apple update and something went wrong. Now it won't install from the apple website at all

Apple sent an update to itunes program and it didn't complete installation correctly. Now I can't load it and get a consistent error message and the iiPhone can't sync without itunes installed. Anyone able to help with this?

Now I can't load it and get a consistent error message
What does the error message say? (Precise text, please.)

Can i install mictodoft on a usb key

I wont to install windows on my laptop but I don't wont it on my hard drive can I install it on a USB key

No, only on the internal drive.

Wireless NET install. Can't load USB

Similar Messages

Maybe you are looking for