Wireless Network not reachable

Hey,
I've the following issues since my update to the latest version OSX, I guess.
My office is in the second floor of my house and using an 2,4 Ghz Wireless network all time without no issues. My Router is Asus RT-AC68U latest Firmware which stand in the ground floor.
Today I'm working from home and my connection to network lost after some minutes or trying to open a new website. I've used it with my macbook air (work) and my private Macbook pro retina. Both latest version osx.  Same issues.
The wireless network is always shown in the Network settings at osx.
If i move to the ground floor why the router stand i don't have any issue.
any ideas?
Thanks
Sebastian

Wi-Fi: How to troubleshoot Wi-Fi connectivity

Similar Messages

  • Why is my wireless network not found?

    I have just installed HP Deskjet F4500 on my PC. I want to connect to my wireless network connection but it keeps telling me "wireless network not found". (I am using my wireless so I know that the wireless connection is fine.) I have all correct details (correct network, SSDI, WPE encryption code) for installation but no luck.
    I have a Netgear DG834N router. I did run the www.hp.com/go/networksetup analyser which told me that HP is not currently supporting the router. Can that be right?
    This question was solved.
    View Solution.

    OK, let's go check the router's settings:
    Type 192.168.1.1 into a browser.  The login is 'admin' and the password is 'password'.
    On the left side, choose Wireless Settings under the Setup heading.  You should see your SSID.  Make sure the Mode is set to 145Mbps.  Here you can choose your Security Options.  I highly recommend WPA2-PSK (AES).  If you have WEP, please change it.  WEP is not secure.  If you change your security settings, choose a passphrase that is at least 13 characters, numbers and letters, upper and lower case.  You will have to re-enter this into all of your wireless devices.
    Now, lower on the left side, choose Wireless Settings under the Advanced heading.  Make sure that SSID broadcast is checked.
    If you changed anything, check Apply toward the bottom.
    Let me know what you found.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Password for wireless network not remembered

    I am stuck with the following situation. I have a wireless network overhere, which is a 802.1X-type network which consists of a huge number of different base stations connected together, which requires me to login and has TTLS (PAP) type identity control.
    When I configure this into the Internet Connect application, with my password, it connects. However, on reboot, the Finder immediately asks for my password. When I look in Internet Connect, it's still there, but when I look in System Prefs, the password is not there (only a blank field). When I enter it, click OK, and check the dialog again, the password is already gone into the wind.
    I deleted all entries of the network in all my keychains, reinstalled my system and now I've set the keycahin entry for the network accessible by all programs, but that doesn't help me either. I had a Macbook here not long ago, which didn't suffer from this problem (however, it did not reconnect after sleep/reboot all the time, but never asked me for my password).

    Do not check "Remember Networks this computer has joined."
    In Advanced>Preferred Networks, enter the name of your Network. This is how I have mine set up and I have not experienced any more problems like yours, although I did in the past. In Preferred Networks, I have redundantly entered the same name twice, just in case it skips off to the second one. Probably not needed, but it's been working fine like that for a long time.
    However, since I don't have an Airport Extreme, I don't use Airport Utility. Definitely try rebooting the AE. Might try applying or reapplying the 10.6.8 Combo update.

  • Extended wireless network not extending in ios5

    Hi,
    I have a virgin cable modem into a time capsule.
    I have extended my wireless network using an airport express and it was all working fine with my iphone and ipad.
    Since updating my phone and ipad to ios5 the areas where my network were extended are now not receiving a wifi signal.
    When i check settings on network it appears as though the phone is looking at the time capsule whereas before it just seemed to be connecting to the SSID.
    Any help would be gratefully received.
    P

    is there a way to disable Wireless A, B and G on both Airport Expresses or to force the settings from the Airport Extreme onto both APs to also make them do N Only?
    Unfortunately, no. The "extending" devices use default wireless settings, a/n/b/g wireless.
    You might want to let Apple know what you would like to see in the future:
    Apple - AirPort Express - Feedback

  • Extending wireless network, not working?

    ive been trying to set up a new wireless network for a few days now and while i got this network up and running i still doubt if its exactly what i want.
    i have extreme(n), time capsule(n) and an express(n). im using the extreme as my "base" which is connected to the internet and both the capsule and express are connected by wires. but whenever i use the setting "extend a wireless network", the stations will just become undetectable and not working at all. so to get my network to work i configured them all with "create a wireless network" giving them all the same network name which is working fine. but is this even roaming?

    Welcome to the discussions!
    When you are having extending difficulties, it's often helpful to temporarily locate the Express near your main router...across the room or in an adjacent room and test to see if that works.
    If things worked fine for 6 months and suddenly you have problems, that may indicate that a new wireless network near you has been added at one of your neighbors, which is causing interference on your network.
    Cordless phones are a real problem as well. My neighbor...across the street....can literally knock me off my network if he is in his front hard talking on his cordless phone. I found this out simply by accident, otherwise I would still be blaming Apple for stuff that worked fine for months and then suddenly did not work.
    If the Express works close to the main router, then move the Express further away and test again. Most users locate the Express too far away from the main router when they try to extend a wireless network. A good starting location is a point that is about 1/2 to 2/3 of the distance between the main router and the area that needs more coverage.
    Open AirPort Utility and click on your AirPort Express on the left and look for its AirPort ID on the right. Jot that down.
    When you are testing the extension of the Express, move your laptop close the Express, and hold down the option key on your Mac while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. This should match the AirPort ID of the Express, indicating that your computer is connecting to the AirPort Express.

  • Wireless Networks not available under Manage Default Printers.

    I have a client who has 4 offices he travels between. He needs the default printer to change based on the name of the wireless network he connects to. This feature worked for a while, but after some unknown point stopped accepting new networks into the list
    under "manage default printer". We changed the SSID of two locations a month ago, and I can not get them to show up in the list under "manage default printer". I went through and removed every listing under the "manage default printer"
    list, hoping to start fresh, but after a week, in the dropdown menu, only the old networks are there. 
    Bottom line is I need to find out why these new SSID are not showing as an option to select inside of "manage default printers". Or find a way to manually add them. I (believe) have found where they appear to be in the registry, but the values
    for network name seem to be encrypted. Is there a file I can edit somewhere to manually add in these entries?
    The target networks are remembered and can be managed by windows, and connect automatically. 
    This is a Windows 7 Pro laptop. 
    Thanks!
    -Ozzy

    Hi,
    Based on my research,it may be caused that you have not deleted network locations completely.
    Please follow the steps to check the result.
    1.open the Network and Sharing Center console in Control Panel.
    2.Click on the "Icon" under "View your active networks". This will open the "Set Network Properties" dialogue. Here you can rename a network connection or change the icon for that network connection.
    3.Click on "Merge or Delete Network Locations" to see a list of stored network connections. You can delete the old SSID.
    Regards,
    Kelvin_Hsu
    TechNet Community Support

  • Connected to Wireless Network, Not Connected to Internet...

    Hi All
    I recently had my NVIDIA graphics card replaced as it freaked right out the other day.
    I took my MacBook Pro home yesterday and everything was perfect. It connected to my wireless network @ home as normal, and was functional all night.
    I have come to work today, and it automatically joined up with the network here. Only problem is, that whilst it connects to the network here, and obtains an IP address as well, as soon as I try to connect to the internet, it says that I am not connected to the internet!!!
    Now the finer details:
    * I have reset EVERYTHING. Routers, Modems, Computers etc
    * All firmware is still the same as it was pre-nvidia fix up.
    * Distance is not a problem, I am sitting next to the wireless router.
    * An ethernet cable from the router to my computer ALLOWS access to the internet
    * My Iphone can connect wirelessly to the same network and browse the internet.
    * A windows PC can connect wirelessly to the same network and browse the net.
    * I can see that it is connected to the router AND given an IP address.
    Please help!!!

    I had the same problem. I sent my MBP to get a Logic Board/Nvidia fix and when it came back I could no longer connect to networks using DHCP. I have to manually put in my IP, Subnet, etc. for every network I join.
    Randomly about a week in I had some pop-up window show up asking me to allow incoming network connections for something and when i clicked on it I was able to us DHCP again. Just tonight it stopped working and I am once again in the position where i have to manually input IP info, etc.
    Super Frustrating

  • Bluetooth and wireless network not working

    About a week ago my iphone 4s stopped discovering my bluetooth devices. Today, it will not let me log onto my wireless network as well. I have reset both my phone and router, but nothing seems to be working. Any suggestions?

    While trying to log onto my wireless network I get an error message stating that I have used an incorrect password, but the password is correct and works with my other devices.

  • Wireless Network Not Working In Bootcamp

    I have an early 2006 MacBook Pro running on Snow Leopard and I just ran Bootcamp and installed Windows Xp Pro Service Pack 2. My wireless network adaptor is an Atheros AR5006X. I've installed the drivers in Windows from the Snow Leopard disc and the hardware is recognized, and wireless networks are detected. But I can't connect to any network. I've tried going into Advanced Settings, disabled firewall, I've tried manually setting it up as a preferred network, and I've tried a few other versions of the Atheros drivers from the Internet. Nothing has worked. It always says,
    "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again."
    The signal strength can even be strong and it still won't connected. I never had this problem when I first used bootcamp with the same windows xp sp2, and with the original Leopard drivers disc that you burned when configuring bootcamp.
    Please help. Thanks.

    There are a number of discussions on this topic. In my previous response, I was referring to the first thread:
    Wireless Mouse and Keyboard Not Working in Boot Camp
    http://discussions.apple.com/thread.jspa?messageID=6415376&#6415376
    I got my wireless keyboard to work in Bootcamp/XP
    http://discussions.apple.com/thread.jspa?messageID=6314636&#6314636
    keyboard & mouse stop working after apple driver install
    http://discussions.apple.com/thread.jspa?messageID=6276210&#6276210
    It seems that the basic theme is that if you already installed the Leopard drivers, you will need a non-wireless (USB) keyboard to use/fix it. At this point, you will then need to go and setup the bluetooth to the wireless keyboard. My wireless mouse worked, so that was not a problem -- just the keyboard. I tried using the USB keyboard and seting up the bluetooth to the wireless keyboard, but I could not get it to recognize the bluetooth keyboard. It seems to recognize it for a brief instant, and then report and error.
    I've gotten tired of iterating over this issue, so I haven't read through all of the threads. There may be a better one out there that I've missed...

  • Wireless network not working

    Hello,
    I have a SMC7004VWBR Barricade Router, part # 7509821, version 2. I purchased the Router in 2004 and it has worked flawlessly since then up until last week. I have a home office network that consists of 2 desktop computers connected to the router via Ethernet cables and a laptop computer (Macintosh iBook, OS 10.3.9) connected via wireless (Airport card in laptop). My Internet connection is via DSL modem.
    Beginning last week the iBook's wireless connection to the network stopped functioning on a consistent basis. When I wake the iBook from sleep there is no signal coming from the network even through airport is on and airport is selected in the system preference pane. I have played with all the settings and still no connection. However, after leaving the iBook off over the weekend while I was away, when I re-booted, the signal came back! But then it disappeared again after putting the iBook to sleep and then re-booting. This happened again after the iBook was off overnight and I re-booted. Now I cannot get the signal to appear at all, even if I turn off the iBook for a few hours.
    In all other respects the network works fine. If I connect an Ethernet cable to the iBook from the router, the connection comes back on via ethernet, but airport stays disconnected.
    I brought the iBook to a public library yesterday that has a wireless network and it immediately found the network and stayed connected. Does this mean the issue is in the router?
    I would very much appreciate any help you can offer.
    thank you,
    Bob W.

    Firstly what OS are you currently on? Guess you have check things like the deivce driver is installed, the device is in switched the on position (you did say yes to that) and not disabled in the network connections either... If you have done them, something else you can check is that the WLAN AutoConfig service is enabled and started. To do this open services, this can be done by the run command (Win Key + R) and type "Services.msc". Press ok. Near the bottom of the list that appears should be WLAN AutoConfig, check the service is started and its set to Automatic. If this helps yipee if not no idea what else it could be.

  • IPhone 4s with iOS 8.1: Wireless networks not detected

    My iPhone has ceased to detect any wireless networks. When I am trying to turn WLan off and on again, the settings app is extremely slow or hangs or the phone crashes and reboots.
    I have reset the network settings several times with no improvement. I have mad a soft reset with no improvement. Does anyone have any ideas how this might be solved?
    Thank you!

    I had to do a complete reset of my iPhone 4s for another reason (the new iTunes could not access my Phone...). Afterwards wifi networks could be detected more often, even connection was possible sometimes. However this connection still is very unstable and frequently interrupted when used.
    Just now, the iPhone rebootet while I was making a call... These wifi problems are just the top of an iceberg of problems I am having since I've installed iOS 8
    I sincerely hope the announced 8.1.1 solves them (but I don't really believe my iPhone will ever be what it used to be). I doubt an iPhone is the right purchase for my next phone. There are other manufacturers out there who dont' force their customers to use a malfunctioning release of their operating system. I am talking about signing: It isn't even possible to downgrade and install a working os.
    Apple, I loved you so much because you had beautiful products that work seamlessly. With iOS 8 you broke my heart. My iPhone is now a beautiful and useless brick of electronic garbage. From this day forward, I shall regard you as just another hardware manufacturer selling your products at unreasonable prices. Good luck with that. The question if you are able to uphold quality, innovation and design of your products without Steve Jobs has now certainly been answered.

  • Time Capsule wireless network not visible.

    I have a first gen TC which up to today was working great.
    Today it was very, very slow on the wireless side but ok on the wired side.
    I restarted the cable modem and the TC, after which everything looks okay - but the wireless network is not visible to any of my devices.
    I have restarted it three times, reset it to factory and reconfigured it, switched the network settings to no security and other things but my iPhone, my iPad and my MacbookPro do not see the wireless network regardless of the security option or the networking type - N-only or B/G compatible.
    As I say it was fine until I returned from vacation today.
    Any thoughts?

    OK, so I have done this and it's made no difference. The new network Apple Network b73829 is still present alongside Wireless LAN.
    I can only access Time Capsule if I switch to the new network, with the resulting loss of internet access from my Powerbook and, if I switch back to Wireless LAN I regain internet access but cannot see Time Capsule.
    Although I just want to use Time Capsule to back up I have tried to connect it to my wireless LAN using the Join Existing Network on Airport Utility (even though I've been told I don't need to do this for Time Machine) but it has failed each time. After entering the password and wireless password information etc. and pressing update the Time Capsule device does re-start but there is ALWAYS an error message that says the device cannot be found and I should check that I am close to it (it's 3 feet away) or I should connect via Ethernet. If I connect via Ethernet it seems to disable the wireless functionality that I bought the device for.

  • Neighbor's wireless network not secured, anyway to block it?

    Hi guys,
    I'm using road runner and have parental control so that I can monitor my kids using the internet. The problem I have is that one of my neighbor's Linksys wireless network is not secured and my kids are using it to play on line games, you tube, etc.  and stay up late at night and not doing home work. Anyway that I can block his signal? Like to have your opinion about this situation. Thank you and any help will be greatly appreciated. 
    Message Edited by ono8ono on 10-21-2008 01:32 AM

    Well, then either lock down the computers of your children, take them away during night. Even if you convinced the last person to secure his wireless network you would still have to tell everyone to use WPA2 or WPA with a strong passphrase. WEP is easily cracked within a few minutes with tools readily available. Plus, if you see eight wireless networks broadcasting their SSID you probably have a few more not broadcasting the SSID, a couple of them will probably be open or WEP secured, too.
    And then, once you have them all convinced to use WPA you must constantly monitor the environment for new wireless routers.
    So basically, for most people trying to block their children through the router or even through the computer is futile. Children have far better resources at hand to tackle any problem you may cause them limiting internet. The only really reliable way to do this is the good old way of limiting access to the computer/device. Just like TV. Far more reliable, far more secure, far easier to implement, far easier to understand.
    If you thought so far that a high tech computer and a high tech router should be able to do high tech things to keep your children out: computers are still dumb devices and no match to a teenager desperate enough.

  • Existing wireless Network (not set up by me) add new mac to it

    I have little or no experience.
    A college computer science major (not available) set up a wireless network for my childrens emacs about 2.5 years ago. Using Netgear WGR614V2 router to a cable modem. has worked flawlessly.
    I just received a macbook Pro and in spite of trying to get it added to the network I can't seem to get it.
    I took the computer to starbucks and it accessed the network instantly, so it works fine.
    I need help in getting the computer to communicate with the router so that it can access the cable to the internet.
    I can see the various setting for the existing network by looking at the configurations on the emacs, but don't know how to set enter these to the new computer.
    I know you geniuses can do this in seconds. Please help Regards Jim Svarz

    Jim,
    I know how weird all these networking woes may seem to you. We all started as newbies
    Let's start afresh with the very basics:
    What we need to find out in the first place is:
    The name of your wireless network (this is also called SSID)
    If encryption is turned on for your wireless network (the most common names for wireless security schemes are WEP & WPA)
    If any other security measures (such as MAC address filtering, etc) are set for your wireless network that prevent your MacBook from joining in.
    All of the above information/settings is stored in your Netgear WGR614V2 router. (It's also displayed on your eMacs, but let's start with the router so you can get an overall picture of how your network works).
    If this is the correct model of your router: http://kbserver.netgear.com/products/wgr614v2.asp, I'm flicking through its manual to help you set you get up and running faster.
    Now, grab a pen & sheet of paper, sit in front of any eMac that works fine and place your MacBook next to the eMac. The next steps are following the instructions according to the router's manual.
    From the eMac:
    Open Safari
    In the address bar type: 192.168.0.1 (and press Return)
    You'll be asked for a username and a password, (Again according to the manual) the default ones are username:admin and password: password
    Assuming that the guy that setup your network didn't change the default ones, you'll be able to see (log-in) the router's configuration pages.
    Let me know if you can log-in to your router to continue to the next step(s)
    Macs running 9.x, Macs running 10.4.x, SGI workstations running Irix 6.5.x

  • With MSCHAPv2 configuration wireless network not able to connect

    Hi 
     When working on PXA270 Development Board ,we have customized Driver for WiFi on windows embedded CE 6.0 R2 The configurations i have done is follows:
    dhcp checked 
    username xxx
    password xxx  
    domain name xxx    
    wireless on  
    authentication wpa2 enterprise
    encryption aes and tkip
    eaptype MSCHAPV2
    with the above configurations, i seen a different behaviour
    1) after configuring MSCHAPv2 , and rebooting the PXA270 target board, my wifi is not connected. may be we are getting after many reboots sometime ( once in 50 times)
     2) with the default PEAP or Tls configuration it is working fine please let me know where can i find source code of MSCHAPV2 and why the behaviour is in this way?? please help me in MSCHAPv2
    Ravikanth Varigonda

    Above mentioned configuration are done through WZCtool.c which inherently uses WZC API to configure the parameters into WIFI stack.
    When we configure these value and reboot the system (manually), we get connected to the network. But if we reboot the system again, we
    cannot connect back to the same network.
    Ravikanth Varigonda
    Ravikanth Varigonda

Maybe you are looking for

  • Safari keeps crashing and wont reset or clear history.

    Safari keeps crashing and a Netflix pop up opens everytime I open Safari. The same window and tabs keep reloading every time I open Safari. I have tried clearing the history and resetting Safari, but nothing is working. Below is the error report I am

  • Problem with FM "DYNP_VALUES_UPDATE"

    Hi gurus      I am using a table control containg 2 columns. I have used a f4 help in the first column by the fm "F4IF_INT_TABLE_VALUE_REQUEST" . And the corresponding second column i am displaying a value for which i have used the fm "DYNP_VALUES_UP

  • NO VIDEO IS PLAYING DESPITE FLASH UPDATE ITS NOT WORKING???PLEASE HELP

    any kind of video like youtube or any type is not working . pls help??

  • How do i reinstall apple mobile device

    Every time for a week. same errors and install rolls back error policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version ="8.0.50727.4053".publicKeyToken="1fc8b3b9a1e18e3b". processorArchitecture="amd64"".Please refer to help and support for more in

  • Playlist organizing for Movies

    I've created new folders and added playlists within the folders labeled as such: Drama, Children's Classics, Horror, Adventure... etc (Genre stuff) I've placed my home brew movies in corresponding genre playlists. But Apple TV says that I can not hva