Wireless networks connections are not showing up

I have a 3000 C200 model with windows 7 installed. From a few days the wireless network connections are not being detected. The networks are being detected in my other laptop. Can someone please help me in resolving the issue.

Hi Sandy2246,
Thanks for posting and welcome to the community. Was reading through your post and was wondering if you try reinistalling the driver listed below. Please ensure to choose the correct drivers that matches your machine wireles card.
Networking: Wireless LAN
Driver
Operating System
Released
Broadcom Wireless LAN driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 5.60.18.8
Broadcom Wireless LAN Driver
Read me
Windows Vista
14 Dec 2009
Broadcom Wireless LAN driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 4.170.75.0
Broadcom Wireless LAN Driver
Read me
Windows XP
24 Mar 2009
Intel wireless 3945abg driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 10.5.1.59
Intel Wireless 3945abg driver
Read me
Windows XP
04 Oct 2006
Wireless LAN (Intel abg) driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 12.4.3.9
Intel Wireless LAN (abg) Driver
Read me
Windows Vista
24 Aug 2009
Hope this helps.
Please do post back your results.
Regards

Similar Messages

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Netsh does not work to set IP address of "Wireless Network Connection"

On Windows 7 Professional
This set of commands work for configuring the "Local Area Connection"
netsh interface ip set address name="local area connection" static 74.94.87.157 255.255.255.248 74.94.87.158 1
netsh interface ip set dns name="local area connection" static 8.8.8.8
netsh interface ip add dns name="local area connection" 68.87.77.130 index=2
BUT for the WiFi connection, this command errors with this message "ELEMENT NOT FOUND"
netsh interface ip set address name="Wireless Network Connection" static 74.94.87.157 255.255.255.248 74.94.87.158 1
BUT the 2 following dns commands DO work for the Wifi Connection.
netsh interface ip set dns name="Wireless Network Connection" static 8.8.8.8
netsh interface ip add dns name="Wireless Network Connection" 68.87.77.130 index=2

I FOUND A SOLUTION
I manually renamed the interface from "Wireless Network Connection" to "Wifi"
Then when I use "WiFi" in the command line, I no longer get the
ELEMENT NOT FOUND error.
I have no idea why renaming the interface works . . as shown on original post above, "set dns name" command worked without the name change, but the "IP set Address" did not work.
Anybody know what this is about ?

I am trying to connect my new ipay to my wireless network and I do not know the password, how can I connect?

I have a new IPAD and trying to hook up to my wireless network. I do not know a password, how can I procees with the set up?

you need to find out what your wifi password is....Search your router online.
I know netgears are usually routerlogin.net (popup ADMIN- pass: password)
Others have a different login.
You can always try typing in your routers IP address into a browser search field(ie. 192.169.1.1)
Some routers come with a setup CD.
Another route with some is reseting the router to factory default(no password). This will allow anyone to access it thats nearby, so Id recommend this ONLY for initial connection, then reconfiguring it. Hold the reset button in for 30 seconds.

Conflict with WRT160N and Windows Wireless Network Connection

I have a WRT160N router connected to a Verizon FIOS cable modem with five computers (all Windows based) wirelessly connected to the N router. Four of the computers auto detect the N router connection when the computer starts up using Windows Wireless Network Connection and operate well. One of the computers, which is the only one running Easylink for router configuration, will not connect through the Wireless Network Connection. I have to use Easylink to manually connect. The WNC gives a msg that Windows cannot configure this wireless connection and to configure the wireless connection using Wireless Zero Configuration service. When I configure WZC correctly the WNC sees all available networks and allows me to select the Advanced Wireless checkbox to allow Windows to connect to the wireless network. However, when I reboot the computer none of the configuration parameters are saved and I am back to manually connecting using Easylink and going through the entire process again. Any suggestions? Thx

Uninstall the EasyLink and connect manually. I think EasyLink 3.0 or later is coming soon ..
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

Win7 Home Premium - systray Wireless network connection icon?

Hi,
My home wireless connection is running fine and I do not have my Ethernet cable plugged in.
In the systray part of the taskbar, there used to show a Wireless network connection icon - a little graphic icon that looked like 5 vertical bars side-by-side, with bars increasing in height, left to right. That icon is no longer in the systray and
it appears to have been replaced by the "wired" icon - a little square with a tiny picture of a plugger on its left side. And since I don't have my Ethernet cable plugged in, there's a little red "x" on the wired icon. I don't
know what I did to cause the wired icon to replace the Wireless network connection icon in the systray. Any idea how I screwed this up and how to put things back again?

Hi cwr64,
It might be caused by netsh command using. Please try following methods
Method1: Uninstall all “6to4 Afapter” and “isatap” device in device manager.
Right click this computer->Properties->Device manager->View->show hidden devices
Right click and uninstall all “6TO4 Adapter” and “isatap” devices in
Network adapters.
Method 2
Please try to uninstall all your network adapter driver and reinstall them again. Then restart your computer check if the icon comes back. It might be caused by netsh command using.
Note: backup or download your adapter driver before removing the drivers from device manager.
Regards

My devices are not showing up on my itunes. How do i fix this?

My devices are not showing up on my itunes to sync. how do i fix this?

Why is this answer being accepted by users? Am I supposed to restart my Mac EVERY TIME I want to sync my iPhone, iPad or iPod?
Has anyone found a solution to this problem? I see this question in the Apple Support forums quite frequently, and the answer always boils down to 'http://support.apple.com/kb/TS1591' - Which - after exhausting the obvious, you've got a bad cable or bad USB port checklist - recommends that you 'Restart your Mac' to resolve the issue.
That's not an adequate or acceptable answer - If Apple is ignoring this question, then they're the ones with a 'Problem' - Ignoring these obvious issues (this isn't a bad cable / bad USB port problem) is only going to lead to a loss of customers. I'm certain that Apple has the technical expertise to investigate and resolve the underlying issue. The real question is 'does Apple still value the customer'?
My iTunes (11.1.4) has stopped recognizing Devices (an iPad 2, an iPhone 5S, an iPod classic). This has been going on for about a month now (since 11.1.4?). Yes, I have the current OS (OS 10.9.1), yes my iDevice has the most recent iOS (just updated to 7.0.6 (1.1.2 for 160GB iPod Classic), yes my USB 3.0 ports work (after I reboot the computer). The syncing and connectivity works fine (with all my devices/cables/USB ports) until I disconnect my device - What good is my mobile device if I have to leave it tethered to my Mac in order to use it?

TS2972 some of my episodes are not showing up on my ipod HELP!!!!

i connect with my ipod and some episodes are not showing up HELP!!!

Need more information.
Episodes of what?
Where from?
Why would yu expect them to be on the iPod?

All of my contacts are not showing up

Once I updated my phone to to iCloud, now all of my contacts are not showing up in my contact list but if I type in the number, they show up. How do I fix this?

I also have this problem, just from the iPhone 5s which makes my life crazy, too.
The problem of having multiple devices doesn't seem to help, but the odd part is when everything I am doing is correct, it still doesn't sync like it used to do before iCloud, and when we had to USB wire connect the iPhone to the Laptop to make contacts sync.
Might I add that I am not using MAIL on my LAPTOP?
but ?Britty sounds like her issue is easier as gmail sometimes can create duplicates so you are in good if you are not having that problem or nightmare...
IF ANYONE ELSE can PLEASE ADD to this THREAD? I would be thankful
as there seems to be a TRENDING on iPhone 5s not syncing with other devices or backwards.....(I have added contacts to the iPhone 5s and they never get added to the iCloud or the iPad or the Addressbook or CONTACTS on the LAPTOP....
This should be working and I have checked the CONTACTS on the laptop GROUPS , iCloud, vs ALL ON MY MAC
it just isn't syncing and in some cases I am getting a WEB DAV error or CAL error...-1
what is that? iCloud will not sync all contacts?
something is crazy
but I want to remain at 10.8 MOUNTAIN LION and not upgrade to MAVERICKS......or use MAIL on my LAPTOP...just CONTACTS ONLY......

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice.

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup
On power-up, my 2nd computer, a 3 yo IBM R51, requires that I open the Network Connections window, then set the Wireless Network Connection Properties under the Wireless Network Tab, clicking on "Use Windows to configure my wireless network settings", before the automatic connection launches to the WRT150N v1.1 router signal.
I just bought the router and have the latest firmware.
My primary computer does not require the above settings change every time.
Is there a selection I can make so this is automatic on power-up or restart of my 2nd computer?

It was already set to automatic on both extended and standard tabs.
For a good measure, I set it to disable, applied, then reset it to automatic and applied again. Still does same thing.
I notice that if I double click on the small icon for the Intel ProWireless Network Card, I get a Wireless Connection Status Window.
This window has a Wireless Settings section where it seems to have a possibly obsolete "Current Location Profile" called ssnetwork (the name of my old network on my old D-Link router that I just changed out for the Linksys.
Anyway, the Network Name (SSID) field is now blank but when it first came up, it had the new name of the network I'm using.
Do you know how I access this "Current Location Profile" so I can edit it and possibly enter my new network name?
There is a button at the bottom of the screen called "Modify WLAN Settings" that I click but nothing launches when I do so.
Now that I manually did the connection setting, my network name appears in the "Current Location Profile."
Ted

Bootcamp Windows 7 Wireless Network Connection: No Valid IP Configuration

I just bought a new 13" MBP and have installed Windows 7 Ultimate via Bootcamp 5.0. I installed the Windows Support Software that I had previously downloaded via Bootcamp Assistant on Mac OS. Although the Wireless Network Connection asked for my network key and connects to the network, I cannot access the internet. The troubleshooter find this problem: "Wireless Network Connection" doesn't have valid IP configuration. I am using my old Dell computer and it is connecting to the wireless properly and my MBP can connect on Mac OS, so I don't think it's a router issue. Here are the things I have tried so far to resolve this issue, but none have worked:
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling
Repairing the Windows Support Software with the Bootcamp 5.0.5033 Support Software Update downloaded from www.apple.com
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling the driver from Bootcamp 5.0.5033
ipconfig /release gives an error about disconnected media.
ipconfig /all says:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Alise-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 68-5B-35-7C-FC-A9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
   Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::1d6a:752c:62e3:d01b%15(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.208.27(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 313048015
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-C6-A6-83-A8-BB-CF-1B-54-3A
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3B
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{C38C3280-5682-4E5A-A978-9DD1A96CDBFF}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{ABCE958D-5FDB-4D1E-86F5-ECF01B80E01F}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{749630EF-9B2E-4DF1-9B6F-B38A5237F81A}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Please help!

Did you find a solution for this? I have exaclty the same problem.
But I could temporarily solve it by setting an IP, gateway, dns etc manually. But that will only work in my current wifi-network.
I can't even get internet sharing from my iphone

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Wireless networks connection​s are not showing up

Similar Messages

Maybe you are looking for

Wireless networks connections are not showing up