Wireless Roaming with more than one access point

Dear All,
I am trying to set up roaming access points around my home. My main router is the Hub 3 and what I am doing is setting the SSID and channel i want on the hub 3 then setting the same SSID on the additional access point (WNR1000v3) and disabling DHCP on the additional access point and setting a static IP and a different channel to the one  on the hub 3. 
The problem I am getting is that my devices (android smartphone and tablet) will either only connect to one of the access points when I am near it and then when I go to the area that the hub 3 is in it drops the connection.
I want to know why this is happening because at another house where I work I have additional access points broadcasting the same SSID as the home hub 2! which works. 
Please could someone tell me why this is happening and what I can do to prevent it.
Many Thanks,
Dominic
Solved!
Go to Solution.

dombullion wrote:
Thanks for the reply Keith, 
But why does it not allow for Roaming?
There is an internal Ethernet switch which routes the Ethernet frames to a specific device MAC address, via the wireless module, or the LAN ports, but not both.
Once a device MAC address appears on the LAN side, all frames are routed to that interface, until the physical interface is disconnected.
That prevents the same MAC address connecting to the wireless interface.
Universal wireless repeaters do not have that problem, as all connections take place on the wireless interface.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • InfoSet with more than one cube

    Has anyone created an infoset with more than one cube?
    Are there any hints for to pay attention?
    Regards
    Chäsitzer

    HI ,
    Some important points :
    it is not possible to define an InfoCube as a right operand of a left outer join.
    SAP no longer supports more than two InfoCubes in one InfoSet.
    Therefore, if you include more than two InfoCubes in one InfoSet, the system issues a warning.
    the key figure values of InfoCubes and DataStore objects are duplicated when you join them to
    InfoProviders (see SAP Note 592785)
    Regards,
    Sathya

  • Sample code with more than one ResultSet in JSP

    Hi
    Can anyone give me sample JSP code using crystal reports JRC with more than one ResultSets which works, since mine always seem to be giving error .
    Thank you
    Selvi
    RCAgent5 detected an exception: Cannot modify a read-only collection.
         at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)

    You can access the JRC samples from SDN in the Business Objects Portal.  The link to them can be found [here.|https://smpdl.sap-ag.de/~sapidp/012002523100006008982008E/crxi_r2_jrc_web_smpl.zip]  There is a sample called jrc_resultset_datasource that shows how to pass a result set to a report; you can use this and modify it to allow another result set to be passed in.
    As a note, if you are having issues and believe it is your code, start with the sample and take small steps when adding new functionality so that you can determine where things go wrong.

  • Apple won't let me sync with more than one computer

    How crazy is it that Apple will not let you sync with more than one computer! I have three computers! One in the kitchen one in my room and one at my parents house. These are all my computers, but if I try to sync my iphone5! with my computer at my parents house itunes says it will erase all my data! I have legally purchased all my music, so I have bought the rights! which means I can have the same songs on mutiply computers.
    I've seen posts like this before, so I know Im not the only one who knows that this is unexceptable! Apple knows too! So heres how we gonna do this, **** itunes and **** apple, they can suck it! I'm sick of Apple and how they try to control everything you do, with their limited youtube video capacity because they "dont allow flash".
    All Apple care about is taking your money, otherwise they would listen to what their customers are saying. These posts are on an apple site after all.
    Thats my opinion, vote this up if you feel the same way.
    Thanks

    I understand what you mean.  If you would have a little more technical background to what is happening when you sync and iOS device, you would understand that the reason for syncing with only one computer is not to control you but is rather to manage the syncing.
    For exemple, how would you manage to backup a device on multiple computer while some songs or apps are on your iOS device but not on the computer?  Copying them back to the computer would only result in what you don't want, keeping different iTunes library on different computer.
    The very best solutions for you is either;
    Make one of your iTunes library the master with ALL your media files and use this one for syncing your device.  You can easily manage all your music using automated playlist (like one for all the music with an older date you would decide).
    Pay for iTunes match and ALL your song (even those you haven't bought from iTunes) to be available in the cloud for you to stream directly to your iPhone.  This however have a monthly fee.
    I agree that on one thing Apple is controlling; it's by not allowing you to extract songs from an iPod.  Giving home sharing now, that would solely restrict you from illegally copying music to others.  But again, you must understand that this limitation isn't to be powerfreak, it have been required to secure the music industries and make iTunes Store possible in the first place.
    And make shure you active Home Sharing as it will give you full access (stream and copy over wi-fi from any computer and iOS devices) in between your iTunes libraries.

  • Can I use iPod with more than one computer?

    I have a 60gb iPod w/ color (4th Gen). On my laptop which is my home computer I also have all my music as well as on my iPod. I would like to know if I can put all my music on a second or even third computer so that I can access the music. Also, my girlfriend has a iPod nano. Would she be able to access my music if I put the music on her computer?

    See this.
    How to use an iPod with more than one computer.

  • Cannot Add Invoices with more than one costing centers by SDK.

    Have no available DI Interface to access cost/profit center
    Cannot Add Invoices with more than one costing centers by SDK.

    Dear Srikanth,
    Thanks a lot for your reply.
    We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
    This is my question.
    It will be appreciated highly if you give me a solution.
    Thanks!
    Xingjun Han

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • Call Transaction and fill a select-options field with more than one value?

    Hello everybody,
    how can I fill a select-options field with more than one value.
    Here is the code example:
      CLEAR: GT_BDCDATA, GS_BDCDATA.
      GS_BDCDATA-program = 'RHALEINI'.
      GS_BDCDATA-DYNPRO = '1000'.
      GS_BDCDATA-DYNBEGIN = 'X'.
      APPEND GS_BDCDATA TO GT_BDCDATA.
      CLEAR: GS_BDCDATA.
      GS_BDCDATA-FNAM = 'PCHOTYPE'.
      GS_BDCDATA-FVAL = 'P'.
      APPEND GS_BDCDATA TO GT_BDCDATA.
      CLEAR: GS_BDCDATA.
      LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
        GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
        GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
        APPEND GS_BDCDATA TO GT_BDCDATA.
        CLEAR: GS_BDCDATA.
      ENDLOOP.
      CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                       MESSAGES INTO GT_MESSAGES.
    THX.

    Hi,
    Please refer the code below:
    *Code used to populate 'select-options' & execute report
    DATA: seltab type table of rsparams,
          seltab_wa like line of seltab.
      seltab_wa-selname = 'PNPPERNR'.
      seltab_wa-sign    = 'I'.
      seltab_wa-option  = 'EQ'.
    * load each personnel number accessed from the structure into
    * parameters to be used in the report
      loop at pnppernr.
        seltab_wa-low = pnppernr-low.
        append seltab_wa to seltab.
      endloop.
      SUBMIT zreport with selection-table seltab
                                    via selection-screen.
    Thanks,
    Sriram Ponna.

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • Error while running spatial queries on a table with more than one geometry.

    Hello,
    I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
    When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
    We are running Oracle Standard 11.1.0.7.0.
    Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
    What this script does:
    1. Create table object1 with two geometry columns, geom1, geom2.
    2. Create metadata (projected coordinate system).
    3. Insert a row.
    4. Create spacial indices on both columns.
    5. Run a SDO_RELATE query on one column. Everything is fine.
    6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
    7. Clean.
    CREATE TABLE object1
    id NUMBER PRIMARY KEY,
    geom1 SDO_GEOMETRY,
    geom2 SDO_GEOMETRY
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM1',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM2',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
    CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
    SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
    DROP INDEX object1_geom1_sidx;
    DROP INDEX object1_geom2_sidx;
    DROP TABLE object1;
    Thanks for help.

    This error appears in GeoServer and SQLPLUS.
    I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
    Anyone knows what could cause an error like this "End of TNS data channel"?

  • Send email from SAP with more than one attachment

    Hi all,
    How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
    Besr regards,
    Munur

    Hi,
    I use :
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    the main problem with different attachemts is to genereate the packing_list.
    the packing list is a kind of description of the data table... where ist the start  of an image, end, size...
    "Creation of the entry for the compressed attachment
            objpack-transf_bin = 'X'.                    " it could be an image
            objpack-head_num = lv_head_num_count .  " inital 1 each att  add 1
            objpack-head_start = 1.                     " fix
            objpack-body_start = gv_startnum.    " table with attachments  1. line one
            objpack-body_num = tab_lines.          " how many lines are in the table of attachment
            objpack-doc_size = tab_lines * 255.   " size of the  attachment...
           objpack-doc_type = lv_typ . " 'JPG'.
            objpack-obj_name = 'ATTACHMENT'.
            objpack-obj_descr = lv_stripped_name  " name of the JPG
       APPEND objpack.
       APPEND LINES OF lt_goscontent TO gt_maildata.  " data Table...
    bestreg
    robert

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

    When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Can you sign in with more than one apple id on an iPad?

    Can you sign in with more than one apple id on an iPad?

    Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Maybe you are looking for