Wireless Speakers via Airport Express

I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
Has anyone had similar problems and is there an answer...??????

Check out this article:
http://www.macfixit.com/article.php?story=20070322005336248
I don't know if it's good or anything, but it looks like the info you want.

Similar Messages

Music interrupts while listening to wireless speakers via Airport Express

I live in an apartment building with many wi-fi connections all around me. When I listen to music via iTunes, I am regularly prompted with the following message: An error occurred while connecting to the remote speaker “Home”, that’s the name of my Airport Express attached to my speakers. An unknown error occurred (- 3256).  This message usually appears twice in a row with a 1-3-second interval. For the song to resume I need to click Play. After play resumes, another message may appear that says: Your remote speakers cannot be found on your network. Check Airtunes configuration and network settings or choose another speaker.  Again I have to click on Play for music to resume. This scenario keeps going on every 30-45 seconds. And yet, the light is Green on Airport Express and the network ha a check mark in front of it. What my network name does not have in front of it is a padlock. Today when all this happened, I lost contact with “Home” and could not regain it. So I decided to reset the AE and, in the process, noticed that the WEP key code which is 26 characters was represented by only 5-6 black dots. I replaced the code and got the network back. But still no padlock. Is my connection secure? Will it all happen again? Why no padlock? Sure enough, within 10 minutes the sam problem reappears. What to do?

The trouble you are reporting sounds like WiFi connection probs. Signal quality and strength is just not sufficient to ensure a constant and high enough data transfer. I would recommend to do some test with AP and computer being rather close to each other. Its may a good idea to switch from WEb to WPA encryption.

Music interrupts when using iTunes & remote speakers via Airport Express

Like many other I have had this problem.
Short version:
It disappeared when I turned of a wireless network expander and was only running the network with the wireless router and Airport Express on.
Long version:
I had the folowing setup. One Linksys wireless router, one Linksys access point configured as wireless repeater (to extend the range of my network). About in the middle my Airport Express is located. When I disconnected the Wireless Repeater the problem disappeared. My conclusion is that Airport Express was switching between the two "base stations" and that was when the interruption was created. Anyone else who has about the same setup and do experience the problem that can verify by disconnecting everything except the wireless router?

The trouble you are reporting sounds like WiFi connection probs. Signal quality and strength is just not sufficient to ensure a constant and high enough data transfer. I would recommend to do some test with AP and computer being rather close to each other. Its may a good idea to switch from WEb to WPA encryption.

Airtunes, Wireless Speakers and Airport Express: A Reality?

Hi all,
I have an Airport Extreme Base Station that I use to wirelessly connect my iMac and pc to the internet and a common printer. Last week, I purchased the Airport Express (AE) to allow for me to play the music from my iTunes library (on the iMac) on some speakers in my backyard during a party. I wound up purchasing some decent computer speakers and connected them to the AE vis-a-vis a 3.5mm stero jack.
Ideally, I want to purchase some really good, wireless outdoor speakers, but I do not know how I would be able to utilize the AE in conjunction with a wireless speaker system. Again, my understanding is that a 3.5 mm stereo jack connecting the speakers to the AE is required to enable Airtunes to play via the AE.
Can anyone suggest a way that I can get Airtunes to play through the AE over wireless speakers without the stereo jack? Are there any wireless speakers that include a subwoofer that would connect to the AE via the 3.5mm stereo jack and then transmit to the speakers via bluetooth?
Thanks in advance for any help!

^^ Thanks, Duane. But how about a situation where the wireless speakers are equipped with a receiver: theoretically, could I attach the receiver to the AE via the 3.5 mm stereo jack and then place the wireless speakers anywhere I desired (within the range of the receiver, of course)?

Wireless printing via airport express

Ive encountered a problem when it comes to printing over my home wireless network. The network consists of a single airport express base station connected via ethernet to my modem and broadcasting a wireless signal for both a macbook and a acer laptop to access the internet, which works just fine.
I also have a HP deskjet multifunction printer connected to the base station via the usb port, witch also shows up in the airport utility as being connected to the router. I'm aware that the scan function will only work when its directly connected to the computer, but as for printing, Ive set up the printer using bonjour for windows on the acer laptop, and that machine is able to print via the base station with no troubles at all.
Here is the problem. I'm able to add the printer to the list of printers on the macbook using the correct driver, and it says under location that its connected to the airport express, but when I go to print (a test page, etc) the document wont print. i get the following message - "Unable to read response header - short read" and it just hangs in line until I cancel the job. Ive tried the options on the apple troubleshooting guide, removing and adding the printer, restarting the base station and the multifunction, etc, but still no result. any ideas?

you might find pointers in the _*Printer Troubleshooting Guide*_.
JGG

No music from iphone to speakers via airport express

I configured airport express via my iMac and it will stream music to my speakers fine. When I am playing music on the iphone 5 and select the airport express button, the stream doesn't play. Any ideas? Thanks!

You would need to take a look at Airfoil.

ITunes 8: I can no longer connect to remote speakers via Airport Express

Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility
I get the following error code (-3256) Apple KB research says:
AirTunes: Error -3256 when streaming to multiple AirPort Express units  You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic. http://docs.info.apple.com/article.html?artnum=303157
I followed the KB link, tried KB solution, then I sent this off to Apple.
"Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
My G4 PowerBook running an earlier version of iTunes connects without problem.

I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

Using Bose system to drive remote speakers via Airport Express / iTunes

I want to connect my Airport Express which is configured for remote speakers in iTunes to my Bose system. My question is which input on the Bose Lifestyle 50 system do I use; ie which input on the "multi-room interface" do I connect to the AE. I think it must be the "aux" but before I buy a suitable cable I would like to be sure.

Use a mini-jack to double RCA. That is all that I used. In the past I have used my APExpress and used the audio out port and all I needed was a mini-jack to double RCA.I have a TV, and a DVD player interfaced through my Denon AVR driving Bose Acoustimass 10 speakers.
MJ

Remote speakers via Airport Express no longer working on one iTunes instance

I have iTunes on my iPhone, Windows desktop, and Windows laptop. At one time they all connected to my Airport Express with remote speakers attached. At some point, after a version upgrade, my laptop no longer sees the remote speakers while the other devices work fine. I can connect to the Airport Express from the laptop, there is no connectivity issue. I can even use the Apple Utility to read/change the settings.
How can I get the remote speakers working again?
Thanks, Andrew

Hello Andrew,
Thank you for the details of the issue you are experiencing with AirPlay through iTunes on your laptop. I found an article with things you can check when you are not able to AirPlay.
I recommend following the steps in the section titled "If the AirPlay icon doesn't appear" in the article below, but this step specifically stands out to me for the situation you described:
Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
You can find the full article here:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thank you for using Apple Support Communities.
Best,
Sheila M.

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

How do I turn on my Remote Speakers via Airport Express

I have a remote speaker set up thru my Airport Express wireless system - - However, I don't see where I access that speaker through my ITunes program on my IMAC. Would appreciate your help

Try this:
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

Speaker volume via Airport Express

My iTunes volume plus the volume on my speakers are both set to the maximum but the music volume is very low when I play iTunes through my speakers via Airport Express - much lower than if I plug my iPhone directly into my speakers
Any tips on how to fix this would be much appreciated
Thanks!

have you tried to power cycle your gear ?
shut everything down for 10 minutes. then, in intervals of 5 minutes, turn the modem back on, followed by the main router, the express next, and you computer last.
does the problem persist ?

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Can I play tracks from my iPod via Airport Express on only from my laptop?

I can play tracks from my laptop thorugh my Bose Lifestyle Airport Express. Is there a way to play tracks from my iPod Touch through my Bose system via Airport Express? My Airport Express is set up as a client to my Sky Broadband wireless router.

I set up my laptop to my Bose Lifestyle System via Airport Express. It may be different for MAC but I just downloaded the Airport Express software and followed the on-screen set-up procedure, which includes entering your WI-FI key. I do not have an iPad. You need to select Airport Express in iTunes as your sound media. This is easily switched by an icon in the bottom right corner of the screen. You will need to switch this back if you want to revert to using the laptop speakers.

Wireless Speakers via Airport Express

Similar Messages

Maybe you are looking for