With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?
With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?
Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x
Similar Messages
-
I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700: Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700: 2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 1
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage”
2012-09-10 11:20:51 -0700: Size : 1.5 TB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700: Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 2
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700: Size : 500.05 GB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with thisI have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700: Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700: 2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 1
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage”
2012-09-10 11:20:51 -0700: Size : 1.5 TB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700: Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Partition 2
2012-09-10 11:20:51 -0700: Name : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700: Size : 500.05 GB
2012-09-10 11:20:51 -0700: File system : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this -
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?
Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene -
I have downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac to update my Lightroom 5.6 (build 974614) but when I attempt to open it I get the following error message "Lightroom_5_LS11_mac_5_7.dmg can't be opened as the disk image is not recognised". I'm running Yosemite OS 10.10 on a Macbook Pro (Retina, 13-inch, Late 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?
-
When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?
Mama --
Which Mac??????
iMac, MacBook Pro, Mini,, what?
Go up to the Apple icon on the upper left hand corner of your screen (menu bar).
Click that, and then "More Info". and then "More Info" again.
What does it say? Here's what mine says: -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message. -
I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !
Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook. -
Why am I getting the following error message? "You can’t open the application “Microsoft Word” because PowerPC applications are no longer supported." I never used to have a proble!
Only Office for Mac 2008 and 2011 will run on Mavericks. Microsoft support for the former package ended in April 2013. If you do not want to spend the money, you might download and try the donation-ware (free) LibreOffice Suite. No ribbon bar crap. Supports about any document created on Windows.
-
Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.
Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams -
When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
Can anyone help solve this problem?I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
or using a different user account on your computer in case it's a problem with that user account.
But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above
Maybe you are looking for
-
Link to second portlet page not working.
I am trying the sample jsp portlet "multipage" that comes with the PDK. When I click the link the page refreshes and displays the new URL, but does nor display the second page's(second.jsp) content. I'm am using Oracle Portal version 3.0.7 and have h
-
TS3899 How can I get rid of a wrong email count on inbox?
I have set up my BT email account in settings, and it works fine. Except that although the inbox if empty there's a constant icon on the home screen showing 13 emails in the box. I can't get rid of this, even though I have set up the email twice no
-
In which Tcode can i view the shipping addresses of the employees
In which Tcode can i view the shipping addresses of the employees
-
ABAP WD: TreeByKeyTableColumn in ALV table (SALV_WD_TABLE)
Hello, is is possible to add a TreeByKeyTableColumn object to a ALV table created using the SALV_WD_TABLE interface? I know that this question has already been posted several times - but the general answer ("use hierarchy columns and set_display_type
-
How to edit a photo with a third party app ?
I use Pixelmator on both ipad and imac and I would like to edit my photos on the mac the same way I do on my ipad but I can't find the way to do so. Has anyone found a way to edit Photos with Pixelmator or Photoshop from the Mac Photo App ?