With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

Similar Messages

  • I have a macbook with Tiger.  What are the steps I need to take to upgrade to Lion and the cloud? I have the Snow leopard disk just received from Apple.

    What are the steps I need to take to upgrade my Macbook with Tiger to Lion and the cloud?  I have the install disk for Snow Leopard.

    Hi Carol, good/sound advice by Ziatron so far.
    We need more info about your Mac to see if it will even be capable,
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    You'll need to buy SL/10.6 first & get it to 10.6.8, then get Lion... if you can run it.
    Or if you can erase your disk...
    http://store.apple.com/us/product/MD256
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they do still have it:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Snow Leopard/10.6.x Requirements...
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory, (I say 4GB)
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading, (I say 40GB at least)
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    It looks like Apple will have Lion available on USB drives for $69...
    http://store.apple.com/us/product/MD256

  • What are the chances of me getting approved for financing for a Macbook with no credit at all?

    I don't have bad credit. I have no credit. I make an okay amount of money annually. Not bad for having no rent or bills over 50$ to pay for. I applied this morning for financing cause I need one for school and it said I'd get a letter in 7-10 days.. Usually that means declined.. Help?

    You really have to have established credit for the Apple/Barclays credit scheme. If I were you, I would expect to be denied. You'll just have to establish credit before you can get 'higher end' credit. It's tough to do - I had to reestablish my credit after being in a nursing home for over 7 years and it's just now - one and one half year later - that my credit is 'good enough,' at least (but getting better every month!).
    Sorry to be the bearer of bad news... while I could probably get Barclays credit now, I tried when I first got out of the nursing home and was denied because I simply had no recent credit history.
    Sorry,
    Clinton

  • KMDF Driver. What are the recommended limits for buffer size when calling WdfCommonBufferCreate

    Hi,
    I have a customer who wants to really stress-test his PCIe hardware. His idea is to declare two 8 GB buffers alternately filled by application software and fetched by scatter/gather DMA in the hardware (Transfer to PCIe card). If I calculate this through,
    this is a maximum of 2M scatter/gather elements per buffer or 32 MByte, assuming S/G element is 16 bytes. i.e. 64 MByte logically contiguous memory as a common buffer for storing the S/G lists. The test system will have plenty of memory, 32 G upwards.
    Still don't think I am likely to get a 64MByte common buffer from the system or even two disjunct 32 Mbyte buffers. If I look at poolmon on my server, the current size for NP is only 86M
    So I expect the driver will have to handle multiple calls to EvtProgramDma, each covering just part of the 8G to be transferred.
    Still I have two questions:
    1) Are there any recommendations, house numbers from experience etc. regarding what is a usable maximum size I can reliably get for a common buffer with a call to WdfCommonBufferCreate (percentage of NP pool?, absolute number? ...). The common buffer is
    for storing the S/G elements for the HW DMA controller
    2) If I just declare a huge array of SCATTER_GATHER_ELEMENT[4M] or 2x huge arrays SCATTER_GATHER_ELEMENT[2M] in the device context (to be managed later by WdfMemoryCreatePreallocated() etc.) , will windows refuse to load the driver because the driver footprint
    is too large?
    We are talking about Windows 7/x64
    Thanks,
    Charles

    Don,
    thanks for your reply. The card is always physically present in the test system which means I could load the driver at boot time, but it would have to be after PCIe enumeration of course.
    So far I have always managed to avoid writing a boot-start driver, my main objection being for "purist" reasons. I understand the MS documentation to mean that boot-start is really only intended for devices that are required to boot the system
    (disk, console, keyboard, maybe network ....). I am aware of the advantage of boot-start though, a much higher probability of getting contiguous memory in larger chunks. This driver however is definitely not relevant for system start. The add-in card is essentially
    a high performance source of test data and only runs when a SW application has been started.
    The card does have high performance scatter/gather DMA support also 64-bit addressing capability.
    I do wish Microsoft would issue some guidelines regarding realistic sizing of common buffers, it would make my discussion easier. Yes, I could write a test driver and measure it out but I don't really have time for that. Microsoft surely have test/application
    teams for figuring these things out.
    Charles

  • Why are the images on my screen in InDesign so crisp/clear and when I export to PDF to print they are blurry?

    Top Picture is while the program, bottom is when exported as a PDF

    Hi Kathdepew,
    You are checking the PDF in Preview, please look it at Adobe Reader/Acrobat. Preview is not a recommended soft-proofing application.
    Also, check you PDF export settings, it seems the images are being down-sampled. To know better, export the PDF with "High quality presets" and then check.
    -Manish

  • I downloaded Premiere with no trouble, but can't find a setup or install file. What's the deal?

    I purchased a one year membership a few months ago, and installed Lightroom and Photoshop without any troubles.  I now need Premiere for my new classes, so I downloaded it with no trouble.  However, I can't find an install or setup file.  What's the deal?  I've paid for software that I can't install, and I need it for class which started about a week ago.  Help!

    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    -Install, update or UNinstall, and launch after installing

  • When data is loading ,what are the Genaral IDOC errors .

    when data is loading ,what are the Genaral IDOC errors .

    Sujata,
    . For more visibility to your question, please post it as a separate thread.
    . Also try to include specific details on what your problem is.
    . On the SDN, questioners award those who reply with good or helpful answers. This further propels people to reaserch your problems and help you out.
    As you are new to the SDN, just mentioning the above so that you can maximise your gains from this excellent community.

  • What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

    In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
    Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
    While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
    can give the information about the below questions
    whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
    and  what are the better load/performance tools available for Flex Remote Objects?

    Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common.  Just make sure they are thread safe ("var" or local.* all your method variables).
    You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently).  They have mechanisms for handling and caching singletons.  Then you wouldn't have to go to the application scope to get your CFC instances.
    -Carl V.

  • I have a PC with Windows 8.  I purchased Photoshop Elements 13 with Premiere Elements 13 Feb 9.  I think I downloaded both today (each took about 15 minutes to download).  Each appeared to have two components.  When I attempted to run the exc piece, I rec

    I have a PC with Windows 8.  I purchased Photoshop Elements 13 with Premiere Elements 13 Feb 9.  I think I downloaded both today (each took about 15 minutes to download).  Each appeared to have two components.  When I attempted to run the exc piece, I received an error message.  I don't know what to do next?

    if the error message was about a missing archive, you need to place both the exe and 7z files in the same directory for photoshop elements.  and then do the same for premiere elements.
    then click the exe in each directory.

  • Can you grab multiple frames in sequence with Premiere elements as you can with Pro?

    I use File: Export: Media: Export settings (format BMP) if in Premiere Pro

    Yes, you can Publish & Share as a filmstrip from Premiere Elements 12.

  • Burning dvd with premiere elements 11

    I burn video files on to dvds.  I always key NTSC widescreen.  Sometimes, the image fills the tv screen.  Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen.  How do I get the image to fill the tv screen?

    Thank you for responding to my problem.  I'm afraid the reading didn't help.  All of my 20 files were created with the same camera, the same project settings, the same equipment, etc.  But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall.  Most however, have a 2" black border around the image.  It makes no sense to me. 
    Date: Sun, 10 Mar 2013 10:32:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Burning dvd with premiere elements 11
    Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
    Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Merging two projects with Premiere elements 12.

    Hello,
    On my computer (windows 7) i have different directories with movie-fragments. From each directory i made a movieproject. It took a long time to trim everything. Now i have one project from 1,5 hours and another from 20 minutes. I would like to put the two projects together and then cut it into two projects. I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project. Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
    I found out that i can work of course with the Project Asset and import the moviefragments again, but then i have to trim everything again.
    I could also export one movie as for example AVI and then insert it with the Project Asset into the other project. But then i have no possibility to change the titles and transitions.
    Does anyone know a way to merge two projects?????
    Many thanks, Stephan

    Stephan
    You wrote
    I used it a lot when i worked with the program i used before Premiere Elements.
    Important: What version of Premiere Elements are you referring to in the above? Or, are you referring to another program that is not Premiere Elements?
    No version of Premiere Elements allows the user to open one project file (project.prel file) in another.
    You can copy/paste insert between two project files (project.prel) using ClipMate in conjunction with Premiere Elements. You cannot do a copy/paste insert between projects without ClipMate in use with Premiere Elements. The How To for this Windows Only feature is found
    http://www.atr935.blogspot.com/2013/05/pe-clipmate-copypaste-between-pe.html
    The alternative is to export your project 1 Timeline "trim" selectively to a file saved to the computer hard drive and then import that export into project 2.
    In this workflow considerations need to include project 1 export format consistent with project 2 import settings.
    So, we need details to explain the why not for
    Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
    and
    I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project.
    In the first part, what were your export settings from project 1 and your project preset for project 2.
    In the second part, did you use ClipMate with Premiere Elements or something else?
    What you want to do sounds very doable so we need to discover the whys to get to the solution.
    Thank you.
    ATR

  • How do I install the additional content file (PRE7_Cont_WWEFGJ) that I downloaded with Premiere Elements?

    Additional content for Premiere Elements 7 can be found by following the link in the article linked to at the end of this FAQ.
    You'll need to log in to your Adobe account, and then you'll see the link to the download on the same page as the Free Trial download.
    John Venediger received this from Tech Support, based on his problem installing additional content (including templates and themes):
    When trying to install/open the contents file (PRE7_Cont_WWEFGJ) you get this message - The setup has detected that premiere elements is currently in use. Please close Premiere Elements, then launch setup again despite the fact that Premiere Elements is not in use.
    To resolve this issue, please perform the following steps:
    1. Right-click the Microsoft® Windows XP® taskbar and select Task
    Manager.
    2. Under the Applications tab of the Task Manager, please ensure Adobe
    Premiere Elements or Photoshop Elements is not running in the background.
    3. If Adobe Premiere Elements or PhotoShop Elements is running in the background, please
    select the application and press End Task.
    4. Next, switch to the Processes tab and look for a process named Adobe
    Premiere Elements.exe. and Photoshop ElementsEditor.exe.
    5. If Adobe Premiere Elements.exe or Photoshop ElementsEditor.exe. is running, please select the process and press End Process.
    If you are still unable to install the additional content, please refer
    to our knowledge base document kb404997. Perform step 8 and try the
    installation again. Continue to step 7 if necessary. To access the
    document, simply copy the following and paste it in the address bar of
    your web browser:
    http://www.adobe.com/cfusion/tdrc/index.cfm?loc=en_us&product=premiere_elements

    Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

  • How do I configure the custom external editor to work with Premiere Elements 13

    Situation
    I own Lightroom 5.6 and I'm experienced. I've just bought Premiere Elements 13 and I'm a video-editing virgin (be gentle with me). I've spent a day experimenting, reading, watching videos, I've tried asking my question in Premiere Elements forum, and I'm still stuck (i.e. I've tried reasonably hard to solve my own problem).
    Problem
    I've tried to set up the custom external editor in Lightroom 5 to send photos to Premiere Elements, so that I can incorporate images into movies. Having set it up, when I use it by selecting Photo/Edit In/Premiere Elements 13/, there is an exciting lull as a copy of the image is created and appears in LR, then Premiere Elements launches, then what??? There is no clue as to what has happened to the image regarding its import into Premiere Elements 13. It doesn't appear on the screen, it doesn't appear in the Organizer, it's no-where to be seen, other than in LR!
    Resolution sought
    Can anyone tell me:
    1. Is it possible to use Premiere Elements as an external editor in LR5 ?
    2. What are the precise settings for each field (I've played with the various field options but obviously haven't yet found the right combination)?
    3. If I configure it correctly, what does good look like: what should I expect to see happen in Premiere Elements when I squirt photos over from LR5 via the 'Edit In' option in LR5?
    I don't know if this is relevant: MacBook Pro 16GB 2.8Ghz i7, 750GB SSD (i.e. plenty of space, plenty of horsepower), OS X 10.9.5
    I'm hoping the answer isn't 'sorry, it can't be done' because if it is possible, it would be a real contribution to my video editing workflow.
    Thanks
    Phil

    You don't have to buy an Apple keyboard, but you probably need at least to buy a keyboard that connects via proper USB instead of through some Windoze-world adapter, which probably requires a driver that's not available for the Mac OS.
    The Apple Bluetooth KB and Magic Trackpad make a fabulous combination for use with any MacBook Pro that spends a lot of time in clamshell mode, because the trackpad works exactly like the built-in trackpad. So there's no transition adjustment to make when you pack up your MBP and go portable with it.

  • Problem with premiere elements 4.0

    i am having
    problem
    with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Maybe you are looking for