Withholding tax calculation at down payment clearing F-54

Hi,
Can any one reply the solution
When I am posting down payment to vendor, Basic TDS, Surcharge, Ecess on TDS and Ecess on Surcharge calculated.
Invoice is half of the down payment and TDS and Ecess on TDS calculated properly.
but when i am trying to clearing the down payment against invoice thru F-54, TDS and Ecess on TDS reversed and surcharge and Ecess on Surcharge is also reversed on proportionate basis.
It should not be reversed and client wants which is TDS is raised at Invoice it should be reversed. but we are getting more than that.
Plz help me
sai

Hi,
I think, what system doing is fine,
Let me explain with the accounting entries,
1. Down Payment
Debit Vendor SPL GL a/c      1000
Credit Bank a/c                                945
Credit TDS Payable (all taxes)             55
2. Invoice Verification
Debit GR/IR or Expenses a/c           2000
Credit Vendor a/c                                     1890
Credit TDS Payable (all taxes)                    110
3. Down Payment clearing
Debit Vendor a/c                     945
Debit TDS Payable a/c              55
Credit Vendor SPL GL a/c                       1000
4. Payment (Final)
Debit Vendor a/c                     945
Credit Bank                                               945
5. TDS Payment
Debit TDS Payable                      110
Credit Bank a /c                                         110.
Hope the above scheme of enteries would be helping you to understand this flow.
Saravanan.A

Similar Messages

Withholding tax in vendor down payments

Hi Friends,
While testing a scenario of withholding tax and vendor down payment
When Vendor down payment recorded with WHT;
For down payment document Vendor line item report (FBL1N) shows withholding tax amount in withholding tax amount column, withholding tax report S_P00_07000134 is showing the down payment document with correct tax amount.
When the above Vendor down payment cleared;
For the cleared document Vendor line item report shows zero in withholding tax amount column, and the withholding tax report S_P00_07000134 is also showing neither the cleared document nor the down payment document.
If the cleared down payment is reversed;
Vendor line item report shows withholding tax amount in withholding tax amount column, withholding tax report S_P00_07000134 is showing the down payment document but with zero tax amount.
Also the WHT amount in vendor line item report in column withholding tax is being displayed without a minus(-) sign indicating a debit amount, but this amount is in fact not a debit amount, when this column is sum up it gives incorrect total.
Please share your experience on such scenario.
Regards,

Hi MAURIZIO,
Thanks for refering the SAP note, but this note speaks of inconsistency of displaying WHT info with lot of withholding tax information, this note is applicable upto Release 470. We are on ECC 6.
Regards

Tax calculation on down payment

Hi all,
At the time of progress billing- there is no tax calculation for down payment for Service Invoice.
so tax calculation on down payment will be FI step through(F-29).
For e.g total contract value is 1000 and 10% is down payment..for this tax will be calculated on 900 and for 100 downpaymen the tax calculation will be through FI side.
Is it possible or correct way t do this otherwise please suggest some other solution.

Service Tax is NOT Income Tax. So, you would not calculate Service Tax downpayments. Service tax is applicable only on Service rendered and does not concern whether it is paid. (Though, if you want to avail Service tax credit, you'll have to pay for the service, which is mandatory as per the Indian Tax laws).
So, Service Tax is only calculated from the Invoice. As long as no invoice is raised, no Service tax is payable / deductable.
The above is true for India and most countries. You have not mentioned which country are you working with. If such a scenario is appropriate in your country, you'll have to consult your country version documentation.
Ravi.

Withholding tax on vendor down payments

The System is not calculating withholding Tax when I make down payments to to vendors. How may i correct this please

Hi MAURIZIO,
Thanks for refering the SAP note, but this note speaks of inconsistency of displaying WHT info with lot of withholding tax information, this note is applicable upto Release 470. We are on ECC 6.
Regards

Withholding Tax for Customer Down Payment F-29

Dear all,
I have configured the withholding tax and it works fine for the AP: invoice, payment, advance payment.
However I encountered problem for AR side: customer down payment (F-29). During the payment there is a "withholding tax" button that once you click a pop-up window will appear to enable you enter the withholding tax data.
My problem is no withholding pop up window appear and no error message as well. Thus I am unable to enter the withholding tax data.
The customer has been assigned with withholding tax type and withholding tax code. I follow the follow documentation for the configuration steps and it works well on AP side.
http://www.sapficoconsultant.com/Bonus/Extended%20Withholding%20tax%20configuration.pdf
Can you please kindly advise if there is any missing step need to be performed for withholding tax configuration for customer? How to solve the above issue?
thank you very much in advance.
Dahlia

Hi Umesh,
Thank you very much for your quick respond.
Yes, I forget to mentioned in my previous email, I have done the following in the customer master:
1. Assigned withholding tax type and withholding tax code.
2. Enter the validity date from and to.
3. Check the withholding tax checkbox in customer master.
However the F-29 still do not have a withholding tax window pop-up.
Any other things that I need to do?
Thanks a lot.
Dahlia

Withholding Tax Calculation Error for Vendor Down Payment Clearing:Oct '09

Hi,
We are trying to incorporate the new Withholding Tax Structure w.e.f. 01-Oct-09.
There were 3 scenarios possible:
a. Invoice = Down Payment
b. Invoice < Down Payment
c. Invoice > Down Payment
While 1 & 2 were taken care of effectively, the third scenario did not work as expected. The scenario is as follows:
1. Down Payment (Date : 30/09/09)
Amt : Rs. 40000/-;
Withholding Tax @ 15% : Rs. 6000/- (40000 * 15%)
Surcharge @ 10% : Rs. 600/- (6000 * 10%)
Edu Cess @ 2% : Rs. 132 (Rs. 6600*2%)
Higher Edu Cess @ 1% : Rs. 66 (Rs. 6600*2%)
2. Invoice (Date : 02/09/09) - As per new TDS Rates
Amt : Rs. 50000/-
Withholding Tax @ 10% : Rs. 5000/- (50000 * 10%)
Surcharge : NIL
Edu Cess : NIL
Higher Edu Cess : NIL
3. DPC (Date : 02/09/09) - Reversal of TDS calculated in Down Payment (Step 1) above.
Issue:
While making J1INCHLN, amount is adjusted as Rs. -1000/- (hence zero) not payable.
Also, the Surcharge, Edu Cess & Higher Edu Cess are also getting reversed in DPC.
As suggested by SAP Note No. 1372734 - Handling of downpayment clearing scenarios after budget '09, the scenario does not seem to work.
Actual payable should be worked out as under:
Invoice : Rs. 50,000/-
DP : Rs. 40,000/-
Bal : Rs. 10,000/-
TDS @ 10% : Rs. 1,000/-
All TDS Challans, Certificates & Returns must reflect Rs. 1000/- in the Challan.
Require assistance.
Regards,
Kapil Tilwani

Hi Kapil,
The following needs to be taken care of -
The message controls settings as the note suggests must be set as W.
When entering the details the logic is Vendor Debit amount is Tax amount + 1
The Vendor credit line, the tax code has to be assigned with the advance amount (amount for which the challan has been created) as the tax base amount and the tax amount will be the extra liability that needs to be created.
In your example -
The tax amount will be - 2000 ( the debit at the time of downpayment clearing should have been 4000 instead of 6000)
Tax base amount - 40000 (Challan for this amount has already been made at the time of downpayment made)
The vendor Debit - 2001 (2000 + 1)
The vendor credit - 1
Note - Tax amount and base amount has to be made manually in the withholding Tax tab for the credit entry.
Please revert for any clarification.
Thanks and Regards,
Anit

Deffered Tax transfer - Down payment Clearing F-39

Hi,
I am using TAXINN procedure and configured deffered tax. I have created two sets of tax codes one set with multiple tax rate in tax codes and one set with only one tax rate in tax code.
Tax code I1 and I2 is created for interim service tax and final service tax with one tax rate in the tax code. The system is working as expected for this setting i.e. when I cleared the down payment against invoice it is updating the table DEFTAX_ITEM table with the advance paid document number.
Tax code S1 and S2 is created for interim service tax and final service tax with multiple tax rates in the tax codes. Here the system is not updating the table DEFTAX_ITEM with the advance paid document number when I cleared the advance against invoice using F-39 T.Code. because of this when we excute deffered tax transfer using S_AC0_52000644 the system is not considering this document. Could you please let me know what is missing is there any thing I have to activate to update the DEFTAX_ITEM table when we cleared the advance with the invoice when the invoice/advance is having a tax code with more than one tax rate in it.
Advance thanks for your help and regards
Koteswara rao Padarti

hi...
please dont use a deffered tax code for down payments...
Raghav

WH Tax - Down payment clearing against invoice

Dear Experts,
This is regarding the down payment clearing against invoice where WH tax is involved in Down payment as well as in Vendor Invoice. we also deduct Work Contract Tax Z1 on vendor invoice.
the process is as follows :
Step 1 - Down payment to Vendor through TC # F-48
Entry : Vendor A/c Dr 2200.00
To Bank 2178
To TDS 22.00 @ 1%
Step 2 - Vendor Invoice Booking through TC # FB60
Entry : Expenses Dr 4400.00
To Vendor 4180
To TDS 44.00 @ 1%
To WCT 176.00 @ 1%
Clearing down payment against the invoice posted using FB60.
Step 3 - Down payment Clearing through TC # F-54
Entry : Vendor Dr 1980.00
To Vendor 2200.00
To TDS 44.00
To WCT 176
But in this process, it clearing WCT tax code also which i dont want in this. And if i adjust amount and do not clear whole amount available amount then after simulating it showing difference coming and debit and credit amount of line items.
But if i dont include WCT tax code in whole process then its working fine no problem coming in it, but want it also to include in clearing process of down payment against invoice.
Best Regards
Arun Rai

Dear,
i am following the SAP standard process for deducting TDS on down payment and invoices.
First i deduct the TDS on down payment and Then again full TDS amount on invoice not adjusted it in WHT tab in base amount after adjusting Advance payment.
in next process f-54 i cleared the advance payment against invoice so it reverse the invoice TDS amount to adjust the tds as per advance payment TDS.
In img i confiured the WHT for payment posting as by selecting "Central inv. prop." option in Central invoice option.
Regards
Arun Rai

Withholding tax calculation @ Customer payment

Hi
Experts, can any one help me on this issue??. I want to calculate and post withholding tax for a customer at the time of incoming payment(F-28). I have already activated extended withholding tax, defined tax type, tax code, & assigned in the customer master data. But system not calculating the tax nor its displaying tax code in the payment screen, & throwing a message when I double click on the relevant tax column ie " withholding tax information missing from line item" I f someone could throw a light on this, it would be a great help,
Thanks in advance
Hariharan.

Kindly check
1. Define witholding tax type for invoice posting
IMG > Financial Account Global settings > Withholding tax > Extended Withholding Tax > Calculation > Withholding Tax type > <b>Define Withholding Tax Type for Invoice posting</b>
2. Define witholding tax type for payment posting
IMG > Financial Account Global settings > Withholding tax > Extended Withholding Tax > Calculation > Withholding Tax type > <b>Define Withholding Tax Type for Payment Posting</b>
and also check OBWW (Define account for w/h tax)
rgds.

Deferred tax: Post down payment clearing individually $1 while f-4E3?

Hi all,
We are booking the invoice as well as clearing the special GL transaction through F-43/ F-41
001 39S      0009000457 PRADEEP SANGVIKAR          10,000.00-
002 40       6030000039 Testing Charges             9,066.00                 SA
003 40       4040000067 Service Tax Credit(           907.00                 SA
004 40       4040000069 EDN cess on ST cred            18.00                 SA
005 40       4040000071 H&SECess on ST cred             9.00                 SA
Hhere S (SPECIAL GL) is for staff advance
we are getting the error
Deferred tax: Post down payment clearing individually $1
Message no. DEFTAX023
kindly solve ?

Hi,
Kindly refer to below SAP notes. Might be helpful.
Note 913805 - Error FF891 or DEFTAX025 when posting FI-Documents Version: 5
Thanks
Aravind

Deferred tax: post down payment clearing individually $2 while f-44

Dear Experts:
We are trying to clearing the Special G/L transaction through T-code : F-44 but facing an error as Deferred tax: Post down payment clearing individually $2. Please find attached screen shot for your reference.
Would you please suggest me why I'm facing this error and how can I resolve this issue?
Thanks in advance and your prompt response is will be highly appreciated.
Best Regards.
Ripon Kumar Paul

Dear Dev:
Many thanks for your prompt reply. Already I've checked Sap Note 913805 and deleted all 4 BTEs mentioned there through T-code : FIBF but problem still exists. I'm facing the same problem.
Best Regards.
Ripon Kumar Paul

F-04 Withholding tax calculation

Dear All,
In Tcode F-04 (Transfer Posting with clearing) i am using Posting key "31" for Vendor Credit AMount.
Here, I am not able to calculate automatic withholding tax amount
Withholding tax data is already maintained in the vendor's master data.
Withholding tax calculation is possible with other Tcode like FB60...
but With F-04 it's not calculating.
How to calulate withholding tax amount.
It it something configuration problem .
Pl suggest me some solution.
Regards
Swati

For E.g
My Client wants the system to calculate Withholding Tax on purchase of Air Ticket from his Agent
Travel expenses                                               xxxxx
Vendor - Air travel agent                                              xxxx
Note 2 : WHT collected by the vendors on purchase of the air ticket and recorded as an asset for onwards claim from Tax Authority.
The system simulates the following accounting entry: (Payment)
Vendor                                                                                XXXXXX
               WHT Asset**                                                                  XXXXXX
               Bank                                                                               XXXXXX
In This Case this entry is not Correct . It should be
Vendor                                                                                XXXXXX
                WHT Asset                                                                                XXXXXX
                Bank                                                                                XXXXXX
Hope you got my requirement
Edited by: MAZ on Sep 27, 2010 3:18 PM
Edited by: MAZ on Sep 27, 2010 3:56 PM

Down Payment clearing push button in MIR7

Dear Gurus,
Hi.....
I have created a PO for goods and for freight there is a separate vendor. For this PO i have created Down payment request for goods and down payment request separately for freight vendor also. Now, i have posted the down payments and i have done MIGO.
When i am doing MIR7, down payment clearing push button is appearing for goods vendor but where as it is not appearing for freight vendor..
Can u please suggest how to achieve this down payment clearing push button for the freight vendor?
Best Regards
Paresh Kumar G

There is no such provision in down payment where you can specifically pay to Freight vendor. You normally create down payment on the Down payment % that is allowed and entered in PO header under Payment Processig tab. The down payment will only consider the Basic price. It will not include Taxes and delivery costs conditions.
Due to the same reason, Down payment clearing option will not appear if you perform Invoice verification for Planned Delivery costs conditions in MIRO. But if you collectively perform Invoice verification for Goods and Planned delivery costs then you will get the said option in MIRO.

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4) after F-48

Hi,
I have tried all sorts of steps, but I am unable to see this Down Payment Clearing pushbutton in MIRO transaction.
Required package - LOG_MMFI_P2P is already installed and found OK in SFW5.
Down payment maintained in PO, request created in F-48 and now I am trying to clear it in MIRO, but this button is not visible.
Any clue?
Please revert.
Regards,
Dipak

Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun Rai

Withholding tax calculation at down payment clearing F-54

Similar Messages

Maybe you are looking for