WL 7.0 for Solaris - Installation problem

Hi
I am trying to install WL 7.0 with SP2 for Solaris which was downloaded from the
BEA Download Center.
The following is the extract of the error :
==============================================================
$ ./server702_solaris.bin
** The directory "/var/tmp/" does not have enough space for extraction.
Please input another directory: /opt/utl/tmp
Extracting 0%..................................................................)
.100%
** Error during extraction, error code = 2.
=====================================================
what could be the problem?
Thanks in advance
Regards
Ramkumar

"Ramkumar" <[email protected]> wrote in message
news:3ee5d2ca$[email protected]..
>
Hi
I am trying to install WL 7.0 with SP2 for Solaris which was downloadedfrom the
BEA Download Center.
The following is the extract of the error :
==============================================================
$ ./server702_solaris.bin
** The directory "/var/tmp/" does not have enough space for extraction.
Please input another directory: /opt/utl/tmp
Extracting0%..................................................................)
100%
** Error during extraction, error code = 2.
=====================================================
what could be the problem?The installer is actually a self-extracting Zip-archive. It tries to unpack
itself into /var/tmp/something-random, before starting the actual
installation.
If you do not have enough free space in /var/tmp, try creating a temporary
directory somewhere else, move the installer into the new directory, and do
an 'unzip server70..............bin'. Once you have unzipped the installer,
I think you can look in a file called AUTORUN or something for the java
command to run the installer manually.
Good luck,
Jan Bruun Andersen

Similar Messages

  • No Disk meet the criteria for Solaris installation

    Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
    1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
    2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
    3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
    Appreciate for any help.
    Wallace

    Did you check that your adaptec scsi controller is
    supported by solaris and/or has a working driver
    (from sun or adaptec) ?
    Here's the HCL for solaris 8 x86:
    http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

  • How to get the free space from logical drive for solaris installation?

    Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

    Hi,
    See: http://www.sun.com/software/solaris/self_help.jsp
    At the bottom of that page, FAQ # 3
    HTH,
    John

  • Sun, take responsibility for appserver7 installation problems!

    *** First set of problems...
    I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
    I chose default installation directory and then the install
    complains that Pointbase 4.2 should be installed into the
    same directory etc. Cannot unselect the Sample apps and
    Pointbase options.
    *** Second problem...
    I have an instance previously installed on Windows 2000
    Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
    When i start application server 7.0 , then i get the following
    message:
    Could not start the instance: domain1:admin-server
    Server failed to start:abnormal subprocess termination
    Could not start the instance: domain1:server1
    Server failed to start: abnormal subprocess termination
    Could not start one or more instances in the domain:domain1
    Could not start one or more domains
    Press any key to continue ...

    When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
    For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

  • How to configure DHCP on linux jumpstart for solaris installation

    I have configured jumpstart on linux and able to install solaris on SUN sparcs
    using rarp and bootparams files.now im trying to use linux DHCP for solaris clients. I have the done the DHCP setup on linux using this doc http://www.sun.com/bigadmin/content/submitted/setup_dhcp.jsp.
    but when im trying to boot the sun spac client with boot net:dhcp - install command it is failing with error "panic - boot: Could not mount filesystem.
    Program terminated". exports file is ok and NFS service is also running.
    Please help me on this issue.
    Thanks in advance.
    Shashi

    Darren,
    Thanks for the response.
    I tried to install client60001dev (sparc client) from server60060pxe (linux jumpstart) as follows
    client60001dev is able to get the IP address from server60060pxe DHCP and then the boot file also, but after that the client is not showing any NFS queries.
    {0} ok boot net:dhcp - install
    Boot device: /pci@1f,4000/network@1,1:dhcp File and args: - install
    Using Onboard Transceiver - Link Up.
    Timeout waiting for BOOTP/DHCP reply. Retrying ...
    Timeout waiting for BOOTP/DHCP reply. Retrying ...
    2aa00
    Server IP address: xx.xx.xx.119
    Client IP address: xx.xx.xx.111
    Subnet Mask : 255.255.255.0
    Using Onboard Transceiver - Link Up.
    panic - boot: Could not mount filesystem.
    Program terminated
    tcpdump on server60060pxe
    03:16:12.292836 IP server60060pxe.42445 > client60001dev.20759: UDP, len
    gth 516
    03:16:12.303646 IP client60001dev.20759 > server60060pxe.42445: UDP, len
    gth 4
    03:16:12.303669 IP server60060pxe.42445 > client60001dev.20759: UDP, len
    gth 516
    03:16:12.314479 IP client60001dev.20759 > server60060pxe.42445: UDP, len
    gth 4
    03:16:12.314501 IP server60060pxe.42445 > client60001dev.20759: UDP, len
    gth 516
    03:16:12.325313 IP client60001dev.20759 > server60060pxe.42445: UDP, len
    gth 4
    03:16:12.325347 IP server60060pxe.42445 > client60001dev.20759: UDP, len
    gth 516
    03:16:12.336158 IP client60001dev.20759 > server60060pxe.42445: UDP, len
    /var/log/messages on server60060pxe
    Feb 26 03:15:35 server60060pxe dhcpd: DHCPDISCOVER from 08:00:20:fe:4a:23 via eth0.
    369
    Feb 26 03:15:35 server60060pxe dhcpd: DHCPOFFER on xx.xx.xx.111 to 08:00:20:fe:4
    a:23 via eth0.369
    Feb 26 03:16:08 server60060pxe dhcpd: Dynamic and static leases present for 139.185
    .168.111.
    Feb 26 03:16:08 server60060pxe dhcpd: Remove host declaration client60001dev or remove
    139.185.168.111
    Feb 26 03:16:08 server60060pxe dhcpd: from the dynamic address pool for xx.xx.xx
    /24
    Feb 26 03:16:08 server60060pxe dhcpd: DHCPREQUEST for xx.xx.xx.111 (xx.xx.xx.
    119) from 08:00:20:fe:4a:23 via eth0.369
    Feb 26 03:16:08 server60060pxe dhcpd: DHCPACK on xx.xx.xx.111 to 08:00:20:fe:4a:
    23 via eth0.369
    Feb 26 11:16:09 server60060pxe in.tftpd[10266]: RRQ from xx.xx.xx.111 filename 8
    BB9A86F
    Feb 26 03:22:00 server60060pxe kernel: eth0.369: dev_set_promiscuity(master, -1)
    Feb 26 03:22:00 server60060pxe kernel: device eth0 left promiscuous mode
    Feb 26 03:22:00 server60060pxe kernel: device eth0.369 left promiscuous mode
    Shashi

  • Which Name Service for Solaris installation behind router?

    I want to install Solaris on my computer in a small home LAN behind a router.
    The Solaris computer is not part of a zone, a domain and there is no own DNS server in LAN.
    I want Solaris to get the DNS from router which in turn gets the DNS server assignments from network provider.
    This is similar to a Windows installation which gets the current DNS servers defintion from network provider at connection startup.
    Now what do I have to select during Solaris installation? See attached snapshot
    I guess LDAP, NIS and NIS+ are not suitable.
    Do I have to select "None"?
    Does DNS mean "own DNS server in LAN" or "DNS from router" (as intended)?
    Thank you
    Peter

    Hello
    I don't know you home setup but in general you will have to use DCHP so solaris will get all info from the route the ip and dns etc..
    If you want to use a static ip you will have to config the DNS by hand.
    Regards
    Eze

  • Urgent Help is Needed for Database Installation Problems

    How can we resolve the following database problems in Windows XP? Originally, we had Oracle 10.1.0.4.2, and we wanted to upgrade it to Oracle 10.2.0.1. We uninstalled Oracle Home ORAH1_DEV and then got the following problems while installing Oracle 10.2.0.1. How can we resolve all these errors so database configuration assistants can work successfully? Please help us with these ASAP. Thank you very much for your help and time in advance.
    -Oy
    These are the popup message we got.
    POPUP 1. This appears 3 times, then ignore
    Error in writing to file 'C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll'.[C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll(The process cannot access the file because it is being used by another process)]
    Click 'Help' for more information
    Click 'Retry' to try again
    Click 'Ignore' to ignore this error and go on.
    Click 'Cancel' to stop this installation
    buttons Help Retry Ignore Cancel
    POPUP 2. Error in writing to file 'C:\OraHomes\ORAH_DEV\jdk\bin\java.exe'. [C:\OraHomes\ORAH1_DEV\jdk\jre\bin\java.exe (The process cannot access the file because it is being used by another process)]
    Click 'Help' for more information
    Click 'Retry' to try again
    Click 'Ignore' to ignore this error and go on.
    Click 'Cancel' to stop this installation
    buttons Help Retry Ignore Cancel
    POPUP 3. Erro in writing to file 'C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll'. [C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll (The process cannot access the file  because it is being used by another process)]
    Click 'Help' for more information
    Click 'Retry' to try again
    Click 'Ignore' to ignore this error and go on.
    Click 'Cancel' to stop this installation
    buttons Help Retry Ignore Cancel
    POPUP 4. Error in writing to file 'C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll'. [C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll (The process cannot access the file because it is being used by another process)]
    Click 'Help' for more information
    Click 'Retry' to try again
    Click 'Ignore' to ignore this error and go on.
    Click 'Cancel' to stop this installation
    buttons Help Retry Ignore Cancel
    POPUP 5. Error in writing to 'c:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb'. [C:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb (The process cannot access the file because it is being used by another process)]
    Click 'Help' for more information
    Click 'Retry' to try again
    Click 'Ignore' to ignore this error and go on.
    Click 'Cancel' to stop this installation
    buttons Help Retry Ignore Cancel

    Grace wrote:
    Yes, I have it installed in the same Oracle Home. Is it possible to create it there? Or I must create a new Oracle Home for the new installation? Please reply as soon as possible. Thank you very much for your help.
    -OyA specific ORACLE_HOME holds the binaries for a specific version of Oracle. You don't upgrade by simply installing a newer version of Oracle into the ORACLE_HOME of an older version. If you tried to do that you have probably irreversibly corrupted the original installation.
    And there is no URGENT or ASAP here. We are all volunteers with regular jobs. If you have "urgent" support issues you need to open a Service Request with Oracle Support.

  • Oracle Portal 3.0 for NT installation problems.. HELP!!!

    this is what shows up when I try to access my portal page:
    Call to WPG_SESSION API Failed.
    Error-Code:6550
    Error TimeStamp:Wed, 06 Dec 2000 19:09:23 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
    Notes:
    I'm running Oracle 8.1.6 on a different box then the Portal application. I loaded the Oracle Client on my machine(with Portal). I've gone through the Portal installation instructions many times and I'm almost certain I've configured everything correctly(but obviously not). I've also gone through the Net8 Assistant to see if I can get a connection and can.. I've made sure my db is up by using SQL Plus. Any help would be greatly appreciated.

    I thought I was out of the woods but have gotten some strange behavior. I'm able to work inside of the Portal application.. then I got this error..
    Proxy log On failed.
    Please verify that you have specified correct connectivity information i.e.username, password & connect-string in the Database Access Descriptor
    Error-Code:12500
    Error TimeStamp:Fri, 08 Dec 2000 18:32:38 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network
    transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
    This is sort of the same thing from before. As soon as it happened I tested things out like:
    testing out the Oracle HTTP Server
    - Apache
    - Jserv (demo)
    - modplsql
    for connectivity. I'm able to click on the above links and see that they are working. Then I brought down the OracleportalHTTPServer service and restarted.
    I then tried to use SQL Plus to test db connectivity using Username: internal Password:xxxx with the service name but it spits back:
    TNS:listener failed to start a dedicated server process. It seems no matter who I try and login as using SQL Plus I get the same thing. As I mentioned before I have the db on another machine with the Portal application & Oracle 8.1.6 Client on my machine. I didn't configure anything after I installed the 8.1.6 Enterprise Edition.. I was able to bring up the Portal page with no problems. Am I missing something.. seems very strange that I'm able to work in the application for a bit and then have it die on me.
    I jumped onto the machine with my db.. brought down the TNSListener on that end, brought down the db service (OracleServiceXXX)and brought it back up and was able to use SQL Plus on this machine and get a connection to the db. I then got back on my machine, brought down the OracleportalHTTPServer service on my side, brought it back up and used SQL Plus to show a connection to the db. Thoughts??

  • EBS Extension for Endeca : Installation problem

    Hii,
    After running 'envSetup.sh' file and selecting phase 2
    Phase 2 - Install Weblogic Server, ADF Runtime, Endeca Server
    It shows the following error and installation is aborted.:
    Installing Weblogic Server ...
    Extracting 0%...................................................................................100%
    At least one component must be selected.
    Installing ADF Runtime ...
    Starting Oracle Universal Installer...
    Checking if CPU speed is above 300 MHz.    Actual 2666 MHz    Passed
    Checking Temp space: must be greater than 150 MB.   Actual 12943 MB    Passed
    Checking swap space: must be greater than 512 MB.   Actual 10047 MB    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-07-02_10-03-44AM. Please wait ...Log: /u01/Oracle/software/oraInventory/logs/install2014-07-02_10-03-44AM.log
    Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.
    Reading response file..
    Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
    Actual Result: oracle-6
    Check complete. The overall result of this check is: Passed
    CertifiedVersions Check: Success.
    Checking for binutils-2.20.51.0.2-5.11.el6-x86_64; found binutils-2.20.51.0.2-5.11.el6-x86_64.  Passed
    Checking for compat-libcap1-1.10-1-x86_64; Not found.   Failed <<<<
    Checking for compat-libstdc++-33-3.2.3-69.el6-x86_64; Not found.        Failed <<<<
    Checking for compat-libstdc++-33-3.2.3-69.el6-i686; Not found.  Failed <<<<
    Checking for libgcc-4.4.4-13.el6-i686; Not found.       Failed <<<<
    Checking for libgcc-4.4.4-13.el6-x86_64; found libgcc-4.4.4-13.el6-x86_64.      Passed
    Checking for libstdc++-4.4.4-13.el6-x86_64; found libstdc++-4.4.4-13.el6-x86_64.        Passed
    Checking for libstdc++-4.4.4-13.el6-i686; Not found.    Failed <<<<
    Checking for libstdc++-devel-4.4.4-13.el6-x86_64; Not found.    Failed <<<<
    Checking for sysstat-9.0.4-11.el6-x86_64; found sysstat-9.0.4-11.el6-x86_64.    Passed
    Checking for gcc-4.4.4-13.el6-x86_64; Not found.        Failed <<<<
    Checking for gcc-c++-4.4.4-13.el6-x86_64; Not found.    Failed <<<<
    Checking for glibc-2.12-1.7.el6-i686; Not found.        Failed <<<<
    Checking for glibc-2.12-1.7.el6-x86_64; found glibc-2.12-1.7.el6-x86_64.        Passed
    Checking for glibc-devel-2.12-1.7.el6-x86_64; Not found.        Failed <<<<
    Checking for glibc-devel-2.12-1.7.el6; Not found.       Failed <<<<
    Checking for libaio-0.3.107-10.el6-x86_64; found libaio-0.3.107-10.el6-x86_64.  Passed
    Checking for libaio-devel-0.3.107-10.el6-x86_64; Not found.     Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Some recommended packages are missing (see above).
    Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the product release notes to find out how to get the missing packages and update the system.
    Error: Check:Packages failed.
    Checking for VERSION=2.6.32-100.28.5.el6; found VERSION=2.6.32-100.28.5.el6.x86_64.     Passed
    Checking for hardnofiles=4096; hardnofiles=1024.        Failed <<<<
    Checking for softnofiles=4096; softnofiles=1024.        Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The kernel parameters do not meet the minimum requirements (see above).
    Recommendation: Perform operating system specific instructions to update the kernel parameters.
    Warning: Check:Kernel failed.
    Expected result: ATLEAST=2.12-1.7.el6
    Actual Result: 2.12-1.7.el6
    Check complete. The overall result of this check is: Passed
    GLIBC Check: Success.
    Expected result: 1024MB
    Actual Result: 7992MB
    Check complete. The overall result of this check is: Passed
    TotalMemory Check: Success.
    Prereq failed. Aborting Install
    Installing Endeca Server ...
    Starting Oracle Universal Installer...
    Checking if CPU speed is above 300 MHz.    Actual 2666 MHz    Passed
    Checking Temp space: must be greater than 150 MB.   Actual 12943 MB    Passed
    Checking swap space: must be greater than 512 MB.   Actual 10047 MB    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-07-02_10-03-52AM. Please wait ...Log: /u01/Oracle/software/oraInventory/logs/install2014-07-02_10-03-52AM.log
    Copyright (c) 1999, 2012, Oracle and/or its affiliates. All rights reserved.
    Reading response file..
    Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
    Actual Result: oracle-6
    Check complete. The overall result of this check is: Passed
    CertifiedVersions Check: Success.
    Checking for binutils-2.20.51.0.2-5.11.el6-x86_64; found binutils-2.20.51.0.2-5.11.el6-x86_64.  Passed
    Checking for compat-libcap1-1.10-1-x86_64; Not found.   Failed <<<<
    Checking for compat-libstdc++-33-3.2.3-69.el6-x86_64; Not found.        Failed <<<<
    Checking for compat-libstdc++-33-3.2.3-69.el6-i686; Not found.  Failed <<<<
    Checking for libgcc-4.4.4-13.el6-i686; Not found.       Failed <<<<
    Checking for libgcc-4.4.4-13.el6-x86_64; found libgcc-4.4.4-13.el6-x86_64.      Passed
    Checking for libstdc++-4.4.4-13.el6-x86_64; found libstdc++-4.4.4-13.el6-x86_64.        Passed
    Checking for libstdc++-4.4.4-13.el6-i686; Not found.    Failed <<<<
    Checking for libstdc++-devel-4.4.4-13.el6-x86_64; Not found.    Failed <<<<
    Checking for sysstat-9.0.4-11.el6-x86_64; found sysstat-9.0.4-11.el6-x86_64.    Passed
    Checking for gcc-4.4.4-13.el6-x86_64; Not found.        Failed <<<<
    Checking for gcc-c++-4.4.4-13.el6-x86_64; Not found.    Failed <<<<
    Checking for glibc-2.12-1.7.el6-i686; Not found.        Failed <<<<
    Checking for glibc-2.12-1.7.el6-x86_64; found glibc-2.12-1.7.el6-x86_64.        Passed
    Checking for glibc-devel-2.12-1.7.el6-x86_64; Not found.        Failed <<<<
    Checking for glibc-devel-2.12-1.7.el6; Not found.       Failed <<<<
    Checking for libaio-0.3.107-10.el6-x86_64; found libaio-0.3.107-10.el6-x86_64.  Passed
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Some recommended packages are missing (see above).
    Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the product release notes to find out how to get the missing packages and update the system.
    Error: Check:Packages failed.
    Checking for VERSION=2.6.32-100.28.5.el6; found VERSION=2.6.32-100.28.5.el6.x86_64.     Passed
    Checking for hardnofiles=4096; hardnofiles=1024.        Failed <<<<
    Checking for softnofiles=4096; softnofiles=1024.        Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The kernel parameters do not meet the minimum requirements (see above).
    Recommendation: Perform operating system specific instructions to update the kernel parameters.
    Warning: Check:Kernel failed.
    Expected result: ATLEAST=2.12-1.7.el6
    Actual Result: 2.12-1.7.el6
    Check complete. The overall result of this check is: Passed
    GLIBC Check: Success.
    Expected result: 1024MB
    Actual Result: 7992MB
    Check complete. The overall result of this check is: Passed
    TotalMemory Check: Success.
    Prereq failed. Aborting Install
    Please suggest what can I do.
    Thanks
    Palak

    Palak, since your question is about EBS, could you please repost it In one of the EBS forums at
    E-Business Suite
    The folks there should be able to advise you how to overcome the prerequisite failures that the installer seems to be complaining about. ("failed" lines).
    This forum is only meant for Fusion Applications technology questions.
    Thanks,
    Oliver
    Fusion Apps Developer Relations

  • Microsoft Office for Mac Installation Problems

    I have Office for Mac 2004, which supposedly allows 3 installations, with 3 different Installation Key Numbers. I have installed it on 2 Macs, and all is fine until I try to use both computers at the same time. Then I get a message on the Mac on which I installed it second telling me that "a copy of this programme is already open", and if I want to continue I have to close down all the Office applications on the first machine! Very frustrating! I am almost certain I used a different installation Key for the two machines but cannot find the recoed of what Key number was used. If I look in "Properties" I see that the product ID numbers are the same until the last group of digits which are different on the two machines. How can I find which installation Key numbers I used on each machine, and is there any way I can get aouns this problem. I am nervous to unistall and reinstall in case I am then not allowed to reinstall with a previously used Key!?
    Thanks,
    Kendrew.

    Kendrew wrote:
    I am nervous to unistall and reinstall in case I am then not allowed to reinstall with a previously used Key!?
    Don't be nervous. It's no big deal. On one machine, run Office and make note of the Product ID in the About <app> dialog.
    Now, on the other machine, delete the file at /Application/Microsoft Office 2008/Office/OfficePID.plist and at /Users/<you>/Library/Preferences/Microsoft/Office 2008/Microsoft Office Settings.plist.
    The next time you run Office on the other machine, you will be able to re-enter your product key. After entering the serial number, double-check the product key with the one from the first machine. If it is the same go back and enter another serial number.

  • SAP NetWeaver 04s SP9 for JAVA Installation problem on Windows Vista

    Hi Guys,
    Firstly, anyone installed WAS on Windows Vista home version?
      I have gone thru couple of postings in the SDN and disabled firewall but no use.
    here is link :   Port 21212 error : Couldn't install 2004s
      When I am trying to install, getting below problem.
    Error log
    <b>SAPinst is not available on localhost:21200
    Connection to SAPinstAdapter could not be established, see following messages.
    Could not connect to host localhost on port 21200
    Java.net.ConnectionException : Connection refused: connect</b>
    Thanks in advance for your quick reply....
    Prs.

    Hi Anand & Mahesh,
      Thanks for the quick reply.
    Any one of you got a chance to install NW04S 2007 or New York on Windows Vista?
    I think suggested one not available in SDN I guess.
      If I am not wrong, I can get it from Service.sap.com....
    Can you give me the complete path in the service.sap.com if you know....
    If this would not click, alternatively I am planning to change my operating system to Windows XP, this is not a good idea but I dont have option.
    Thanks in advance for quick reply.
    Regards
    Prs

  • TS5376 is there a fix for iTunes 11.1.4 for Windows installation problem?

    I tried the fix in "TS5376: iTunes 11.1.4 for Windows: Unable to install or open" but problem remains. We have the same issue on my dauther's PC (Windows 7 also). iTunes can't open and configure correctly.

    Hey MichelHebert,
    When you uninstalled and reinstalled iTunes, did you follow these steps below? This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    from: Step 1 of Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Let us know if uninstalling those components in that order helped the situation.
    Take care,
    Delgadoh

  • Microsoft office 2004 for mac installation problem

    Hi there,
    I initially download the microsoft office 2004 trial. I bought the student & teacher edition and install it in my macbook. There was a uninstall button on the trial software that I press and I don't know if that removed the trial version. The problem is "this product is license to office 2004 test drive user, my name and product ID number" are all showing initially when you press any of the office 2004 icon. Having the test drive user showing up makes me wonder if the trial version was totally deleted. If the trial version was not deleted, will it slow down the program and how can I remove it without re-installing the full version that I bought.
    Any help is appreciated
    thanks so much
    Macbook   Mac OS X (10.4.7)   60 gb harddrive & 1 gb ram
    Macbook   Mac OS X (10.4.7)  

    The uninstaller is located in the MS Office folder in the Additional Tools folder. There's also one on the Office 2004 X Installer CD.

  • 8i for NT installation problems

    I've just installed Oracle for the first time. I'm a newbie. When I create database using the configuation assistant I get the following error:
    ORA-00101:invalid specification for system parameter MTS_DISPATCHERS
    Then I hit Ignore and I get the following error:
    ORA-00102: network protocol )ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP)
    Then I hit Ignore and I get the following error:
    ORA-0103034:ORACLE not available
    Then when I hit ignore again, I keep looping to the above error message and I'm forced to abort.
    Please help me figure out this problem.
    I could use some help but I also need a good book or something that might describe these kinds of problems and the appropriate solution.
    null

    Check to see if your tnsnames.ora file both on the PC and server have been set up correctly.
    Check to see if all the ORA nt services for ORACLE that should be are up and running
    start a dos session and try to get the database up using >svrmgrl. If that doesn't work then have a look at the path settings.

  • Adobe Premiere Pro CS5 for Mac-installation problem

    I have recently bought Adobe Premiere Pro CS5 as an upgrade (for Mac) and after I enter the serial number during installation it asks me for a serial number of a qualifying product, listing three: Premiere Elements 4, 7 or 8. I only have Premiere Elements 9. I would be happy to buy the aforementioned products except several sources suggest that PE8 was never produced for Mac. Any ideas of what I can do?

    Get in touch with support and they'll guide you through teh steps and provide the necessary codes.
    Mylenium

Maybe you are looking for

  • Disable download a copy option for pdf files in SharePoint 2013

    Hi, We need to disable Download A Copy option of Document library for few users of our site. We have provided them View Only rights which disables download for other files except PDF files. Kindly suggest

  • Help with slow server GUI

    Hey, Just as an experiment, I'm creating a Fake instant messaging application between two computers (one is the host and one is the client). For right now I am having the host read in data from the client, and the host is supposed to display it on it

  • Error after Restoring Datafiles in Archivelog but missing archive log files

    Hi all, I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB . I m happy to have my datafile contents till yesterday morning. But after restoring when i try to open

  • Help setting up small home network with PC and an imac!!!?

    I have an imac in my room, and my mother has a JP PC in her room across the house. We have a router and modem on her computer(I connect to the internet through the router signal) I just recently bought a new printer. It is a wifi printer. I was told

  • 10.4.6 installation problem

    After installing the update, on powerup I just get a light grey spinning world. To start I have to hold down the option key whilst pressing power. Any suggestions how I can fix this?