Wlan problem

well i know that i'm not the only one, but i'm facing loads of problem with my WLAN connection. Is there a solution for this problem, my actual ios is 6.1.1

Same problem here :-( Since I updated my iPhone 4S to iOS 6.1.1 my iPhone isn't able to find any WiFi network at all. I already experienced some troubles with WiFi connection disconnect every few minutes, but now I really got a problem. Resetting network settings doesn't solve the problem. Apple HELP!!!!

Similar Messages

  • WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

    Hi all,
    I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
    Apple Software Engineers - please help and release the next update to fix it
    Best regards
    O.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Habe seit IOS 6 wlan Probleme, die auch nach dem IOS 6.0.1 update nicht behoben sind.

    Habe seit IOS6 wlan Probleme, die auch nach dem IOS6.0.1 update nicht behoben sind. Genau wie vorher, voller Empfang aber keine Verbindung. Gibt es noch neue Tipps wie man das beseitigen kann oder muss man auf ein weiters update warten?

    Hallo,
    bei mir kommt immer die Meldung "Verbindung zu ...(mein WLAN) fehlgeschlagen".
    Nachdem alle Empfehlungen wie Neustart, WLAN aus und einschalten etc. nicht geholfen haben, habe
    ich auf Empfehlung von telefonischem Apple Support  mein iPhone 4S auf Werkseinstellungen zurückgesetzt und als neues iPhone konfiguriert. Leider ebenfalls ohne Erfolg! Meine sonstigen Geräte (iPhone 3GS, iPad2, ein weiteres iPhone 4S, die alle noch unter IOS5 laufen, funktionieren einwandfrei!)
    Wer weiß, wie man wieder auf das gute alte IOS5 zurückkommt, zumindest bis Apple das Problem gelöst hat?

  • Logic remote wlan problems

    Hey, guys,
    I'm experiencing connectivity problems when trying to connect Logic Remote with an iMac running Logic Pro X. Both in the same network of course, all other apps requiring to connect the iPad with any Mac in the network work very well, internet is fine etc. Seems Logic remote connects for a second, than it disconnects again, saying WLAN is weak or unreliable (which isn't the case), sometimes no connection at all. All operating systems up to date.

    I also had this WLAN Problems and solved it:
    1.) Try to remove all controllers you added earlier (also Logic Remote) under setup..
      2.) Restart Logic an Logic Remote -> This should re-add Logic Remote to your Controllers.

  • ANOTHER NOKIA C3 WLAN PROBLEM

    Ok, I'm not able to choose wlan or gprs internet but untill I was trying to open the Internet via WLAN tel says 'service not available''.'' activating default in all applications'' does not work, simply because it's getting back all my options from WEB and I''m connecting the Int via gprs again. What should I do? any ideas? maybe it's all about my router or so? THANKS IN ADVANCE!

    Hi, this is Paulo Bral™,
    I recently got an Nokia C3-00 mobile, and I faced so many problems with Wi-FI connection of this phone that I decided to share my experience with you guys.
    I am going to write here the definitive guide to fix all WLAN problems you may encounter (and this is something that not even Nokia Support was able to do) - are you ready?
    First of all, I am assuming you have the knowledge about Wi-Fi networking (SSIDs, Channels, Security, and all the terms related to setting up a decent Wi-Fi connection), second, you need to have full acess to your router, as we will configure everything from the ground, third and last you will need a tool called InSSIDer from Meta Geeks (Google it) to perform diagnostic tasks explained below.
    Analyzing the networks around you
    First off, you need to spend some time running the tool InSSIDer on your PC to collect data from Wi-Fi networks around you as they may be the cause of your connection problems. We will use these 2 visualizations: "Time Graph" and "2.4GHz Channel" to monitor the networks around - if you dont know what you are doing, better close this page and start running away.
    Configuring the router
    After collecting data from the networks around, now it's time to set up our router. I found out that I have other 15 networks around me, and I found out here that most of them were using Channel 6, the same I was using. Also some of them are using the Channel 9 and 11. In this case, I set my router to use the Channel 1, as nobody were using it and it is also far away from other Channels being used. After some time collecting data, you will be able to see which Channel has no user or less users, and you must choose it. The security of you WLAN is your choice, as it does not have any side effects. I suggest using WPA2 as it is the most secure of the 3 this mobile supports. BTW, don't ask me how to configure your router, ask Google for it!
    Testing WLAN connectivity
    Now it's time to test WLAN connectivity with your reconfigured router. Try opening some pages, try watching YouTube videos... If your mobile is working OK, with no connection errors or timeouts, your problem was only the interference caused by networks around. But, if you still experience problems like timeouts or errors opening pages and YouTube videos, you need to continue to the next step.
    Using router QoS and Static IP
    If you have an very fast internet (10MBPS+) you will need to slow things down, as this cell phone does not really support fastest internet speeds, now you have to know your cell MAC address, make it use an Static IP, and configure QoS to reduce the downstream speed on the cell phone IP to 3MBPS max speed - BTW, not all routers supports this, if yours don't support it, get another router, I recommend Cisco or LinkSyS.
    Still having problems
    The above steps solved my problem for a while, as the phone were working a little better with my Wi-Fi, yet I experienced some timeouts and errors opening pages. Now the next step will require a PC connected to your network and this will reduce to ZERO the timeouts and errors opening pages.
    Keeping the Connection Alive - for bad routers
    If you have a generic (not Cisco or LinkSyS) cheap bad router, you will need this step! I noticed that even when the cell phone were showing the Wireless icon, the LED indicating Wireless on my router was not always turned on, so I understood my router was like "ignoring" the cell phone connection and just stopped responding to its calls. To fix this bad router behaviour, you will need a PC connected to your network, and prepare yourself to laugh: All you need to do is "keep pinging" the cell phone IP as this will keep it connection alive. The simplest way is to create a .BAT file with these 3 lines inside:
    :autoping
    ping <cell phone IP>
    goto autoping
    Now save it on your desktop, use anyname.bat as you wish - now run it and connect your cell phone to the WLAN. You will notice the difference, as it will work so stable like if it were connected using LAN cable!!! You will never have connection problems again!
    Well, that is it, following this guide your cell phone will never have WLAN problems again (well, at least on your WLAN).
    Best regards,
    Paulo Bral™
    Am I butterfly dreaming I'm a man? Or a bowling ball dreaming I'm a plate of sashimi? Never assume what you see and feel is real!

  • Re: GT70 2PC - WLAN problem

    Re: GT70 2PC (Dragon Edition) - WLAN problem
    I am experiencing a problem with LAN rather than WLAN, it as not worked since I bought the Notebook in September. Microsoft support spent over 6 hours trying to assist. The driver is downloaded but not picki...

    Good call.  More problems kept popping up with even more usb ports.  I RMA&#39;d it with newegg and just got the new board and installed it.  Working great so far.
    So anyone who finds this post, if you are seeing these type of issues, definitely don&#39;t w...

  • GT70 2PC - WLAN problem

    Good day,
    I recently bought a GT70 2PC with the following specs:
    processor: i7 4810MQ 2.8 GHz
    RAM: 8GB
    graphics: Nvidia GTX870M
    Ethernet: Killer e2200 Gigabit ethernet controller
    WLAN: Killer Wireless-N 1202 Network adapter
    The problem:
    I connect to the internet via wireless. When I play specific games I experience lag spikes (latency not FPS). Specifically League of Legends. I experience 30 ping constant, and then every 1-2 minutes it jumps to 500+ for 2-3 seconds and then goes back down. It is extremely frustrating. I tried playing Diablo 3 and didnt experience this, so I think it might possibly be specific to League of Legends. Just to note again, I have 100+ FPS constant, its not a graphics problem.
    The troubleshooting ive already done:
    This is not an issue with my fiber optic internet connection. I connect the laptop via ethernet cable and then the problem doesnt occur. I also used to play on my old laptop on the same internet connection without the lag spikes via wifi. I game far from my router so getting a cable is not a good solution, I paid an arm and a leg for this laptop I should be able to play on wifi if I want to. This also cancels out that it may be any other software causing the issue, its a fresh install in any case.
    There is a sticky post called How to fix issues with Killer Lan/WLan. I followed the steps and currently do not have the Killer software installed, I only have the drivers installed. However, this did not help at all. I did this procedure 3 times out of desperation. Did not work for me.
    I contacted MSI support. They told me to update my graphics drivers after I made it clear this is a latency issue. (I updated the graphics drivers the day I got the laptop in any case.). I responded to there feedback but they are taking long to get back to me, I am really hoping someone on this forum might be able to help.
    I checked resource monitor and also used software called Process Monitor to log all CPU and network usage while I was playing. The lag spikes were not visible in this data to my knowledge.
    I tried toggling bandwidth control on and off when I still used to have the Killer software installed.
    My thoughts:
    The fact that there is a post about people having issues with the Killer WLan makes me think that the wireless network adapter (or its drivers) are definitely the problem. However, after trying the fix in the sticky post and it not working makes it feels quite hopeless at this point. I do have the latest drivers installed. I feel like my only option is to wait for new drivers to be released and just hope that its fixed in the new drivers, but who knows how long that will take. Im thinking of sending the laptop back to where I bought it from but if this is a known issue affecting all laptops, id probably have the same problem with a replacement. Any advice on this would be greatly appreciated.
    Thanks in advance!

    Hi Svet,
    Thanks for the link but unfortunately it did not solve the problem. According to device manager the driver version has gone up to 10.0.0.287, but the lag spikes are still exactly the same.
    Further, I installed a game called Day of Defeat, to test if this is a problem specific to League of legends or if its a general problem. I have the lag spikes in Day of Defeat as well so its not game specific.
    Do you think it could be the Killer Network software causing this? Again I tried with bandwidth control on and off. Is there any way I could get these drivers without the Killer software or do you have any other possible solutions I can try?
     

  • Wlan problem with nokia n95 8g RM-320

    i have nokia n95 8g RM-320  frimware 35.0.00.1
    wlan stopped working
    and i did a lot of things but nothing happened
    1- format phone memory
    2- reinstall software many times
    3- restore factory settings
    4- restore beackup without settings
    the problem is
    some times the phone can find the wlan and sometimes not
    and if it find the wlan it cant connect to the connection
    ps. nothing wrong with my access point because i tried another phone and it worked fine
    plz i need help i really need this function to work again

    plz help !!

  • Wlan problems

    I had my nokia 5800 a few weeks now and when i 1st got it i tried to find my bt home hub, it found it but kept losing it again within seconds so i didnt bother at the time, a day later i tried it and it was fine and has been so for the last 2 weeks, it never disconected or nothing unless i made it . Today i goto connect to the wlan and its not always finding my router and when it does it loses it within seconds, (i'm right next it it)  hence me not being able to use the wlan for surfing ect. Does anyone know why and wat i can do to solve this? Has any1 else had same problem with bt home hub 2.0? i havent changed any settings on the fone or the pc/router. thanks

    rottweiler666 wrote:
    I had my nokia 5800 a few weeks now and when i 1st got it i tried to find my bt home hub, it found it but kept losing it again within seconds so i didnt bother at the time, a day later i tried it and it was fine and has been so for the last 2 weeks, it never disconected or nothing unless i made it . Today i goto connect to the wlan and its not always finding my router and when it does it loses it within seconds, (i'm right next it it)  hence me not being able to use the wlan for surfing ect. Does anyone know why and wat i can do to solve this? Has any1 else had same problem with bt home hub 2.0? i havent changed any settings on the fone or the pc/router. thanks
    As it seems that BT Home Hub 2.0 has a "Draft 2.0 802.11n" (pre standard) WLAN access point functionality it might be worth looking into your Home Hub's WLAN settings (look into routers documentation how to access it's configuration, usually you need to login with PC using a web browser) and seeing if there is an configuration option available that would allow you to disable the 802.11n support.
    Typically most 802.11n WLAN access points and routers allow WLAN their radio to be configured to either (a)/b/g/n or (a)/b/g wireless modes and if you switching of the "n" functionality might significantly improve your routers interoperability with 802.11b/g devices (such as Nokia 5800XM).
    In case you are not able to disable "n" completely (i.e. b/g mode) then take a look if there is an option to choose between 20MHz and 40MHz WLAN channel width and set it strictly to 20MHz (instead of to "Automatic" or 20/40MHz).
    Sometimes also switching your WLAN network to another channel might help as well as ensuring that there aren't any external devices nearby operating on the same 2.4GHz frequency band (other WLAN networks, Bluetooth devices, cordless phones etc.) that might be causing interference issues.

  • Nokia N8 WLAN problem

    Hi all, 
    Sorry if this has already been covered!
    I'll keep it simple....Nokia N8, had it connected to my home broadband router yesterday no problems, disconnected it overnight and today when I go to the 'WLAN wizard' section (in settings), it shows my router as a known network, I go to connect and it says connection failed and goes back to 'known network'.  As far as I know I haven't changed any settings on my phone since I was connected to it so not sure why this is happening.  Grateful for any suggestions!

    hi,
    I've got exactly the same problem.
    *I tried changing my routers wireless security settings from WPA to WEP which temporarily solved the problem. Then all of a sudden it starts failing to connect.
    *Changed it to no security, didn't work
    *Tried disabling power saving mode, didn't work.
    Called up the Orange customer support and they advised me to stay away from this phone as its seriously faulty, and that was from 2nd line support (not first).
    if anyone has any other solutions that might work please let me know.

  • WLAN Problem with 5800 - No Gateway Reply

    Hey, basically my problem is similar to most of the ones about the 5800, but I'm trying to connect to my university network, so I can't play around with any of the settings of the network, I was just wondering if anyone had connected to a network like this one, or if they have overcome the no gateway reply problem, or just if you had any advice. Thanks, Phil

    Hi,
    search this forum with the following search term:
    "e65 WLAN 802.1x TKIP PEAPv0"
    From the results you should get some ideas on how to proceed.
    Cheers,
    Timo
    Message Edited by timou on 24-Feb-2009 12:26 PM
    2110i | 3110 | 6110 | 6210i | 9210i | N95

  • WLan problem (firmware 14.3.A.0.761)

    After update to firmware version 14.3.A.0.761, I have had problem of connecting to WLan network.
    I have successfully logged on to the network, but it does not connect to network but is set to status saved.
    The signal strength for the network is good.
    Solved!
    Go to Solution.

    Maybe helpfull:
    Remove the credentials of your phone from the router: remove all so that your router does no longer remember the phone.
    Remove the credentials of your router from the phone: forget your wireless access point in the phone.
    Search for a "new" wireless access point to connect your phone to. Enter the WPS-code etc. (If the phone is still able to connect automatically the first time, you haven't cleared all data &colon; do it again and repeat).
    Now it should work ok.
    Worth a try ..... 

  • Windows Live Messenger WLAN Problem

    I can't seem to get on WLM using my wireless connection. I can use 3G on WLM&The internet browser. I can use WLAN on the browser but I cannot sign into windows live with my WLAN. It says "Network coverage is required" or something but I have choosen my router!

    i have same problem!

  • Nokia 5530 wlan problem

    when I want to connect to a wlan it says that a connection is allready active and i need to close it to connect but no connection is active.I hard reseted it and puted the new softwere on but still the same problem,can you put a smile on my face?

    Com on? Oke, boss. I begin to think it's not your 5530 but your router or accesspoint. Check for MAC filtering and reset the router/accesspoint. If that doesn't work, we run out of options and you've to think bringing your device in for service.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • N97 mini wlan problem

    i bought a brand new n97 mini 2 weeks ago.Everything is fine but the only problem is that i cannot access internet through  wifi,When i try to connect i am getting an error message "invalid server name".plzz help 

    How do you connect to wifi ? Try Menu-settings-connectivity-wlan, pick your home network and select start web browsing. Also try going to web browser on phone and select options- clear all privacy data !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

Maybe you are looking for

  • How to get File Reference of a properties file from EJB

    Hi, I am using Sun App server 7 with Oracle 9i. I am keeping all my SQL statements in a properties file from which I am loading it while making a database operation from Stateless beans. My problem is I am not able to get the reference of the propert

  • User/Library folder hidden.

    Some where in migrating to a new computer and upgraing to Lion, my User/Library has become hidden.  I have read up on how to view hidden files, but I want to retore this to normal.  I have tried a repair disk and repair permissions.  To my knowledge

  • Importing transparent images

    I want to use a logo as an overlay on a video in FCE4. I have a GIF flie of the logo with a transparent background that works just fine when overlaying it on other images in Photoshop & Acorn. However, when I add that image to a track above a video t

  • Problems importing audio files in FCP 7.0.1

    Has anyone else noticed FCP 7 being much more picky about audio files being imported? MP3s, WAVs & AIFFs that all play on my system or in Quicktime are not being recognized by FCP. The only pattern I can see to these files is they were not created on

  • 2 dropdown list

    I have dynamically created 2 select boxes. now when i select the something from the 1st box, I want to display the selected value which it does and populates the second box. This all works fine. However when I select something from the second box it