WLC 5508 do not Join CAP2602E

Question

Dear All,
My WLC a 5508 version 8.0.100.0.Do not Join a CAP2602E, is the first time that i connect this model of AP to the WLC.
I have enabled some Debug and I see that on the controller I got the "Unknown AP type. Using Controller Version!!!" error on the WLC.
Following the trouble shooting guide lines about Join issue, I have also checked this:
(Cisco Controller) >show ap join stats detailed 84:80:2d:c2:9c:90  <-----This is the 2602E Mac
Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable
Discovery phase statistics
- Discovery requests received.............................. 75
- Successful discovery responses sent...................... 75
- Unsuccessful discovery request processing................ 0
- Reason for last unsuccessful discovery attempt........... Not applicable
- Time at last successful discovery attempt................ Dec 02 16:43:17.470
- Time at last unsuccessful discovery attempt.............. Not applicable
Join phase statistics
- Join requests received................................... 0
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Not applicable
Configuration phase statistics
--More-- or (q)uit
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable
Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Not applicable
Last join error summary
- Type of error that occurred last......................... None
- Reason for error that occurred last...................... Not applicable
- Time at which the last join error occurred............... Not applicable
AP disconnect details
- Reason for last AP connection failure.................... Not applicable
WLC Policy config is:  Someone can help pls?

Answer 1

Dear All,
I have done other tests, and I hope this time I will be more precise.
The AP are on the same vlan where is located the WLC.
I found a way to work around the problem.
If I take a out-of-the-box AP and connect if on the same vlan of WLC, and after the boot I configure on the Ap:
capwap ap ip address 172.xx.xx.xx mask
capwap ap ip defaut-gataway 172.xx.xx.xx
capwap ap controller ip address ip_addressxx.xx.xx.xx
capwap ap primary-base controller_name controller_ip_address
The Ap try to Join the WLC but with no success:
User Access Verification
Username: cisco
Password:
AP1c6a.7ae2.ab11>en
Password:
% Access denied
AP1c6a.7ae2.ab11>en
Password:
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#capwap
AP1c6a.7ae2.ab11#capwap ap
AP1c6a.7ae2.ab11#capwap ap controll
AP1c6a.7ae2.ab11#capwap ap controller ip address 172.26.110.4
AP1c6a.7ae2.ab11#capwap ap controller ip address 172.26.110.4                                  prima
AP1c6a.7ae2.ab11#capwap ap primary-base wlc01 172.26.110.4
AP1c6a.7ae2.ab11#capwap ap primary-base wlc01 172.26.110.4controller ip address 172.26.110.4                                  ip addess
AP1c6a.7ae2.ab11#capwap ap ip addess      
AP1c6a.7ae2.ab11#capwap ap ip
*Mar  1 00:03:56.479: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
*Mar  1 00:03:56.479: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
*Mar  1 00:03:56.479: %MESH-6-LINK_UPDOWN: Mesh station 1c6a.7ae2.ab11 link Down
*Mar  1 00:03:58.479: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar  1 00:03:59.479: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
% Incomplete command.
AP1c6a.7ae2.ab11#capwap ap ip ?
  address          Configure ap static IP address
  default-gateway  Configure Default-gateway IP address
AP1c6a.7ae2.ab11#capwap ap ip defa
AP1c6a.7ae2.ab11#capwap ap ip default-gateway 172.26.110.1
AP1c6a.7ae2.ab11#capwap ap ip default-gateway 172.26.110.1                            address\
AP1c6a.7ae2.ab11#capwap ap ip address 172.26.110.
*Mar  1 00:04:39.891: %IP-4-CLASS: Bad IP address and mask 0.0.0.0/0 in class_resolve()
*Mar  1 00:04:40.391: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar  1 00:04:41.555: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
*Mar  1 00:04:41.555: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
*Mar  1 00:04:41.555: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Mar  1 00:04:41.555: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Mar  1 00:04:42.391: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar  1 00:04:43.391: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar  1 00:04:45.439: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar  1 00:04:45.447: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar  1 00:04:45.467: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:04:46.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:04:46.471: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar  1 00:04:46.479: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:04:47.499: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:04:48.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up?
A.B.C.D  
AP1c6a.7ae2.ab11#capwap ap ip address 172.26.110.30 255.255.254.0
You should configure Domain and Name Server from controller CLI/GUI.
AP1c6a.7ae2.ab11#
*Mar  1 00:05:16.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to downsh
*Mar  1 00:05:16.507: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:05:17.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:05:17.527: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:05:18.527: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
% Type "show ?" for a list of subcommands
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#sh cap
AP1c6a.7ae2.ab11#sh cap
*Mar  1 00:05:26.467: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Mar  1 00:05:26.467: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:46:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.003: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to downw
AP1c6a.7ae2.ab11#sh capwap
*Dec  4 07:46:23.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:46:23.707: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.707: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:46:23.711: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:46:23.711: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:46:23.711: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:46:23.711: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:46:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.291: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec  4 07:46:23.319: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:23.723: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.723: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:46:23.727: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:46:23.727: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:46:23.727: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:46:23.727: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:46:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.627: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:23.635: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:46:23.719: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.719: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:46:23.723: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:46:23.723: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:46:23.723: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:46:23.723: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:46:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.723: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:46:23.727: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:46:24.327: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:24.335: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:46:24.343: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:46:24.467: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.9 peer_port: 5246
*Dec  4 07:46:24.467: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.9
*Dec  4 07:46:24.467: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Dec  4 07:46:24.467: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Dec  4 07:46:24.467: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Dec  4 07:46:24.467: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 172.26.110.9
*Dec  4 07:46:25.363: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:25.371: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:46:25.379: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:46:26.399: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:27.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec  4 07:46:29.467: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.9
*Dec  4 07:46:29.471: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:46:29.479: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:46:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec  4 07:46:30.499: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:46:31.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
% Incomplete command.
AP1c6a.7ae2.ab11#sh capwap
AP1c6a.7ae2.ab11#sh capwap ip
AP1c6a.7ae2.ab11#sh capwap ip ?
  config  CAPWAP IP static configuration
AP1c6a.7ae2.ab11#sh capwap ip con
AP1c6a.7ae2.ab11#sh capwap ip config
LWAPP Static IP Configuration
IP Address         172.26.110.30  
IP netmask         255.255.254.0  
Default Gateway    172.26.110.1   
Primary Controller 172.26.110.4   
AP1c6a.7ae2.ab11#
*Dec  4 07:47:22.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.9:5246
*Dec  4 07:47:23.035: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Dec  4 07:47:23.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Dec  4 07:47:23.071: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:47:24.047: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec  4 07:47:24.079: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:47:24.087: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:47:25.107: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:47:26.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec  4 07:47:33.071: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:47:33.071: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:47:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.003: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:47:36.011: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec  4 07:47:36.711: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.715: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:47:36.715: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:47:36.715: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:47:36.715: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:47:36.715: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:47:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec  4 07:47:36.315: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:47:36.719: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.719: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:47:36.723: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:47:36.723: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:47:36.723: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Dec  4 07:47:36.723: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:47:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.627: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec  4 07:47:36.635: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec  4 07:47:36.719: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:47:36.719: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4
*Dec  4 07:47:36.723: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.26.110.4
*Dec  4 07:47:36.723: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.26.110.4:5246
*Dec  4 07:47:36.723: %CAPWAP-3-ERRORLOG: Go join a capwap controller
On the WLC side at the same time:
*spamApTask0: Dec 04 08:46:34.619: ðcIÝ
*spamApTask0: Dec 04 08:46:34.619: f0:9e:63:49:dd:a0 Radius Authentication failed. Closing dtls Connection.
*spamApTask0: Dec 04 08:46:34.627: Unable to find deleted AP f0:9e:63:49:dd:a0
*spamApTask0: Dec 04 08:46:34.628: 1c:6a:7a:e2:ab:11 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  172.26.110.30:10930)since DTLS session is not established
*spamApTask0: Dec 04 08:46:35.345: f0:9e:63:49:dd:a0 State machine handler: Failed to process  msg type = 3 state = 0 from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:35.346: 1c:6a:7a:e2:ab:11 Failed to parse CAPWAP packet from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:35.346: ðcIÝ
*spamApTask0: Dec 04 08:46:35.346: f0:9e:63:49:dd:a0 Radius Authentication failed. Closing dtls Connection.
*spamApTask0: Dec 04 08:46:35.354: Unable to find deleted AP f0:9e:63:49:dd:a0
*spamApTask0: Dec 04 08:46:35.354: 1c:6a:7a:e2:ab:11 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  172.26.110.30:10930)since DTLS session is not established
*spamApTask0: Dec 04 08:46:36.070: f0:9e:63:49:dd:a0 State machine handler: Failed to process  msg type = 3 state = 0 from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:36.070: 1c:6a:7a:e2:ab:11 Failed to parse CAPWAP packet from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:36.071: ðcIÝ
*spamApTask0: Dec 04 08:46:36.071: f0:9e:63:49:dd:a0 Radius Authentication failed. Closing dtls Connection.
*spamApTask0: Dec 04 08:46:36.079: Unable to find deleted AP f0:9e:63:49:dd:a0
*spamApTask0: Dec 04 08:46:36.080: 1c:6a:7a:e2:ab:11 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  172.26.110.30:10930)since DTLS session is not established
*spamApTask0: Dec 04 08:46:36.799: f0:9e:63:49:dd:a0 State machine handler: Failed to process  msg type = 3 state = 0 from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:36.799: 1c:6a:7a:e2:ab:11 Failed to parse CAPWAP packet from 172.26.110.30:10930
*spamApTask0: Dec 04 08:46:36.799: ðcIÝ
*spamApTask0: Dec 04 08:46:36.799: f0:9e:63:49:dd:a0 Radius Authentication failed. Closing dtls Connection.
*spamApTask0: Dec 04 08:46:36.807: Unable to find deleted AP f0:9e:63:49:dd:a0
*spamApTask0: Dec 04 08:46:36.808: 1c:6a:7a:e2:ab:11 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  172.26.110.30:10930)since DTLS session is not established
*spamApTask1: Dec 04 08:47:36.875: Unknown AP type. Using Controller Version!!!
*spamApTask1: Dec 04 08:47:36.876: Unknown AP type. Using Controller Version!!!
*spamApTask1: Dec 04 08:47:36.876: Unknown AP type. Using Controller Version!!!
*spamApTask1: Dec 04 08:47:36.876: Unknown AP type. Using Controller Version!!!
But If I take thw same Ap unplug the power cord, and press the MODE button, then I go in Rommode, I do the command Boot, the Ap restart, I configure again the same capwap ap commands, and the Ap JOIN the WLC!!!!! Somone can explain me why?
AP1c6a.7ae2.ab11#
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP:  Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 42 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 11515904
flashfs[0]: Bytes available: 20482048
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 1c:6a:7a:e2:ab:11
Ethernet speed is 100 Mb - FULL Duplex
button is pressed, wait for button to be released...
button pressed for 24 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)ap:
ap:
ap:
ap:
ap:
ap:
ap: boot
Rebooting system to reset DPAA...
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP:  Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 42 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 11515904
flashfs[0]: Bytes available: 20482048
flashfs[0]: flashfs fsck took 15 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 1c:6a:7a:e2:ab:11
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1"...###########################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 42 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 11515904
flashfs[0]: Bytes available: 20482048
flashfs[0]: flashfs fsck took 8 seconds.
Base Ethernet MAC address: 1c:6a:7a:e2:ab:11
Boot CMD: 'boot  flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1'
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"...###############################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C2600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
Initializing flashfs...
flashfs[3]: 42 files, 8 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 11515904
flashfs[3]: Bytes available: 20224000
flashfs[3]: flashfs fsck took 8 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0  present 8764 8000 0 A8000000 A8010000 0
Rate table has 244 entries (64 SGI/104 BF variants)
Radio1  present 8764 8000 0 88000000 88010000 4
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
%Error opening flash:/ap3g2-rcvk9w8-mx/info (No such file or directory)cisco AIR-CAP2602E-E-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FCZ1843Q0WD
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.5.1.73
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 1C:6A:7A:E2:AB:11
Part Number                          : 73-14511-03
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : B0
PCB Serial Number                    : FOC18403PBM
Top Assembly Part Number             : 800-38357-02
Top Assembly Serial Number           : FCZ1843Q0WD
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2602E-E-K9   
% Please define a domain-name first.
Press RETURN to get started!
*Mar  1 00:00:11.299: FIPS IOS test Image Checksum successful
*Mar  1 00:00:11.299: FIPS IOS test Crypto RNG DEK Key Test successful
*Mar  1 00:00:11.299: FIPS IOS test SHA-1 successful
*Mar  1 00:00:11.299: FIPS IOS test HMAC-SHA1 successful
*Mar  1 00:00:11.299: FIPS IOS test AES CBC 128-bit Encrypt successful
*Mar  1 00:00:11.299: FIPS IOS test AES CBC 128-bit Decrypt successful
*Mar  1 00:00:11.299: FIPS IOS test IOS AES CMAC Encrypt successful
*Mar  1 00:00:11.299: FIPS IOS test IOS CCM Encrypt successful
*Mar  1 00:00:11.299: FIPS IOS test IOS CCM Decrypt successful
*Mar  1 00:00:11.331: FIPS IOS test RSA Signature Generation successful
*Mar  1 00:00:11.335: FIPS IOS test RSA Signature Verification successful
*Mar  1 00:00:11.335: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:11.335: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar  1 00:00:11.791: Registering HW DTLS
*Mar  1 00:00:14.591: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:18.271: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 0 successful
*Mar  1 00:00:18.271: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.271: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.271: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.271: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:24.399: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 1 successful
*Mar  1 00:00:24.399: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.399: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.399: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.399: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar  1 00:00:24.483: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar  1 00:00:26.831: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar  1 00:00:26.859: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
*Mar  1 00:00:26.859: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Mar  1 00:00:26.915: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:00:26.923: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar  1 00:00:26.923: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default config
*Mar  1 00:00:26.927: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar  1 00:00:26.939: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar  1 00:00:27.031: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar  1 00:00:27.031: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar  1 00:00:27.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar  1 00:00:27.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:00:28.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar  1 00:00:28.083: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar  1 00:00:29.071: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar  1 00:00:29.159: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar  1 00:00:29.167: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar  1 00:00:29.175: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:00:30.063: FIPS HW test SHA-1 successful
*Mar  1 00:00:30.063: FIPS HW test HMAC-SHA1 successful
*Mar  1 00:00:30.063: FIPS HW test AES CBC 128-bit Encrypt successful
*Mar  1 00:00:30.063: FIPS HW test AES CBC 128-bit Decrypt successful
*Mar  1 00:00:30.159: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar  1 00:00:30.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:00:30.195: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:00:30.563: FIPS HW test SHA-1 successful
*Mar  1 00:00:30.563: FIPS HW test HMAC-SHA1 successful
*Mar  1 00:00:30.563: FIPS HW test AES CBC 128-bit Encrypt successful
*Mar  1 00:00:30.563: FIPS HW test AES CBC 128-bit Decrypt successful
*Mar  1 00:00:30.563: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed
*Mar  1 00:00:30.563: DPAA Initialization Complete
*Mar  1 00:00:30.563: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar  1 00:00:31.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar  1 00:00:31.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar  1 00:00:55.703: Logging LWAPP message to 255.255.255.255.
Not in Bound state.
*Mar  1 00:01:55.707: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
User Access Verification
Username: cisco
Password:
AP1c6a.7ae2.ab11>en
Password:
AP1c6a.7ae2.ab11#sh capwap
AP1c6a.7ae2.ab11#sh capwap ip
AP1c6a.7ae2.ab11#sh capwap ip con
AP1c6a.7ae2.ab11#sh capwap ip config
LWAPP Static IP Configuration
AP1c6a.7ae2.ab11#
Not in Bound state.
*Mar  1 00:02:45.707: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#cap
AP1c6a.7ae2.ab11#capwap ap
AP1c6a.7ae2.ab11#capwap ap co
AP1c6a.7ae2.ab11#capwap ap controller 172.26.110.4
                                      ^
% Invalid input detected at '^' marker.
AP1c6a.7ae2.ab11#capwap ap controller 172.26.110.4i172.26.110.4p172.26.110.4 172.26.110.4a172.26.110.4d172.26.110.4d172.26.110.4r172.26.110.4e172.26.110.4s172.26.110.4s172.26.110.4 172.26.110.4
AP1c6a.7ae2.ab11#capwap ap controller ip address 172.26.110.4                                    prim
AP1c6a.7ae2.ab11#capwap ap prima
AP1c6a.7ae2.ab11#capwap ap primary-base wlc01 172.2
Not in Bound state.6.
*Mar  1 00:03:35.707: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.110.4 ?
  <cr>
AP1c6a.7ae2.ab11#capwap ap primary-base wlc01 172.26.110.4
AP1c6a.7ae2.ab11#capwap ap primary-base wlc01 172.26.110.4                                 ip def
AP1c6a.7ae2.ab11#capwap ap ip default-gateway 172.26.110.4 1
AP1c6a.7ae2.ab11#capwap ap ip default-gateway 172.26.110.1                            add
AP1c6a.7ae2.ab11#capwap ap ip address 172.26.110.30 255.255.254.0
Not in Bound state.
*Mar  1 00:04:25.707: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
You should configure Domain and Name Server from controller CLI/GUI.
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#
AP1c6a.7ae2.ab11#sh cap
AP1c6a.7ae2.ab11#sh capw
AP1c6a.7ae2.ab11#sh capwap ip
AP1c6a.7ae2.ab11#sh capwap ip con
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
AP1c6a.7ae2.ab11#sh capwap ip config
LWAPP Static IP Configuration
IP Address         172.26.110.30  
IP netmask         255.255.254.0  
Default Gateway    172.26.110.1   
Primary Controller 172.26.110.4   
AP1c6a.7ae2.ab11#
*Mar  1 00:04:47.067: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
examining image...!
extracting info (283 bytes)
Image info:
    Version Suffix: k9w8-.153-3.JA
    Image Name: ap3g2-k9w8-mx.153-3.JA
    Version Directory: ap3g2-k9w8-mx.153-3.JA
    Ios Image Size: 225792
    Total Image Size: 13455872
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: AP3G2
    Wireless Switch Management Version: 8.0.100.0
Extracting files...
*Mar  1 00:04:57.067: %CAPWAP-3-ERRORLOG: Selected MWAR 'wlc01'(index 0).
*Mar  1 00:04:57.067: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec  4 07:57:47.000: %CAPWAP-5-DTLSREQSEND: DT
ap3g2-k9w8-mx.153-3.JA/ (directory) 0 (bytes)
extracting ap3g2-k9w8-mx.153-3.JA/V2.bin (12826 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/Y2.bin (5830 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/file_hashes (7254 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/8004.img (561134 bytes)!!!LS connection request sent peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:57:47.707: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.26.110.4 peer_port: 5246
*Dec  4 07:57:47.707: %CAPWAP-5-SENDJOIN: sending Join Request to 172.26.110.4perform archive download capwap:/ap3g2 tar file
*Dec  4 07:57:47.751: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Dec  4 07:57:47.751: Loading file /ap3g2...
extracting ap3g2-k9w8-mx.153-3.JA/U2.bin (6996 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/X5.bin (1566 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/final_hash.sig (513 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/R5.bin (3423 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/ap3g2-k9w8-tx.153-3.JA (73 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/R2.bin (13992 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/img_sign_rel_sha2.cert (1371 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/B2.bin (9328 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/info (283 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/F5.bin (3662 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/8006.img (563979 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ap3g2-k9w8-mx.153-3.JA/html/ (directory) 0 (bytes)
ap3g2-k9w8-mx.153-3.JA/html/level/ (directory) 0 (bytes)
ap3g2-k9w8-mx.153-3.JA/html/level/1/ (directory) 0 (bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/forms.js (20125 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/appsui.js (563 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/ap_home.shtml.gz (1370 bytes)!
ap3g2-k9w8-mx.153-3.JA/html/level/1/images/ (directory) 0 (bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/images/info.gif (399 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/images/cisco-logo-2007.gif (1648 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/images/background_web41.jpg (732 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/images/login_homeap.gif (19671 bytes)!!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/images/itp-logo.png (2822 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/config.js (27254 bytes)!!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/sitewide.js (17250 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/officeExtendap.css (41801 bytes)!!!!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/back.shtml (512 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/1/config-oeap.js (779 bytes)
ap3g2-k9w8-mx.153-3.JA/html/level/15/ (directory) 0 (bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapBanner.htm (7514 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapConfig.shtml.gz (2864 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapSummary.htm (985 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapHelp.htm (5721 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapMain.shtml.gz (3350 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/html/level/15/officeExtendapEvent.shtml.gz (988 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/B5.bin (1963 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/E5.bin (1846 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/Y5.bin (1511 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/C2.bin (19822 bytes)!!
extracting ap3g2-k9w8-mx.153-3.JA/final_hash (141 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/ap3g2-k9w8-xx.153-3.JA (11381713 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*Dec  4 07:59:47.723: %CAPWAP-3-ERRORLOG: Invalid event 48 & state 10 combination.
*Dec  4 07:59:47.723: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 48, state 10
*Dec  4 07:59:47.723: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Dec  4 07:59:47.723: %CAPWAP-3-ERRORLOG: Failed to process timer message.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
extracting ap3g2-k9w8-mx.153-3.JA/C5.bin (6936 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/ap3g2-k9w8-mx.153-3.JA (215867 bytes)!!!!!!!!!!!!!!!!!
extracting ap3g2-k9w8-mx.153-3.JA/U5.bin (3048 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/img_sign_rel.cert (1375 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/Q5.bin (2806 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/X2.bin (16324 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/E2.bin (19822 bytes)!!
extracting ap3g2-k9w8-mx.153-3.JA/Q2.bin (6996 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/ap3g2-bl-2600 (190140 bytes)!!!!!!!!!!!!!!
extracting ap3g2-k9w8-mx.153-3.JA/V5.bin (512 bytes)
extracting ap3g2-k9w8-mx.153-3.JA/F2.bin (13992 bytes)!
extracting ap3g2-k9w8-mx.153-3.JA/ap3g2-bl-3600 (189183 bytes)!!!!!!!!!!!!!!!
extracting info.ver (283 bytes)
Deleting current version: flash:/ap3g2-k9w8-mx.152-4.JA1...
Set booting path to recovery image: ''...done.
New software image installed in flash:/ap3g2-k9w8-mx.153-3.JA
Configuring system to use
n
e
wW riimtaigneg. .o.udto nteh.e
eavrecnhti vleo gd otwon lfolaads:h :t/aekveesn t1.5l1o gs e.c.o.n
d
s