WLSE and importing images from CCO

I am trying to import images to my wlse and keep getting this error
Device type: AP1200-IOS, version: 12.2.15-JA. Image import failed. Imported file is not a valid image.
Device type: AP1100-IOS, version: 12.2.15-JA. Image import failed. Imported file is not a valid image
I thought this might be because I was running 2.7 and so I upgraded to 2.7.1 and still the same problem. Anyone else encountered this?
Regards
Doug Pallette

Most likely due to CSCee37875. Workaround is to use Import from Desktop instead, after downloading the image from CCO outside of WLSE.

Similar Messages

  • Problem importing images from CCO to WLSE 2.13.1

    Hello,
    I recently upgraded my WLSE Express from 2.13 to 2.13.1.
    Now I have a problem with importing firmware images from cisco.com. Every time I get the following error:
    Image download started for device type: BR1310 version: 12.3.11-JA1
    Device type: BR1310, version: 12.3.11-JA1. Image import failed. Imported file is not a valid image.
    Is there any workaround other then import it manually?
    Thanks,
    Peter

    Most likely due to CSCee37875. Workaround is to use Import from Desktop instead, after downloading the image from CCO outside of WLSE.

  • PSE9 and importing images from Bridge

    I have been using PSE8, and Bridge on my Mac for importing photos to the computer.  I uninstalled it before  upgrading to PSE9 and find Bridge no longer is used, and it seems the Organiser is the way to go.  How do I import all the images (several hundred) that were stored in folders on Bridge to PSE9's Organiser?  Will the folders come across intact, or will I have to sort and grade them all again?  Should I reinstall PSE8 just to use Bridge?  Any advice appreciated.  Thanks. Susan199

    Nothing is stored in Bridge. Bridge is just a file browser: it shows you the current state of any folder you point it at.
    If you want to Organize your photos, just use File>Get Photos>From Files and Folders and have it import the images in your current folders. Bridge keywords are metadata keywords recognized by many programs including organizer (however, organizer keywords, like those in iphoto, are proprietary to organizer and will not automatically be picked up by other programs, unless you write them into the files).
    If you want to use Bridge with PSE 9, that's also possible, with the caveat that you can't update the bridge raw converter anymore, so you won't see thumbnails for images from newer cameras. Directions on using an existing version of bridge with PSE 9 are here:
    http://barbarabrundage.com/2011/01/13/using-bridge-with-photoshop-elements-9/
    Organizer has a folder view which will recognize your existing folders, but if you decide to make Organizer your photo manager of choice, it's best to stop thinking in terms of folders. Use tags instead and stop thinking using folders for organization.

  • Adobe Elements 11 Organizer and Importing images from camera.

    I changed Adobe Elements version (from 10 to 11) and Brand New all-in-one Dell XPS computer that comes with Windows 8 as OS (From XP SP3) ... Now my import in Adobe Organzer gets stuck.   Adobe Elements sees the camera, and compares the files on my camera to the photos in Organizer and knows how may are duplicates.   I then select all the photos it finds as Non-Duplicates and tell it what directory to import into and select (Finish/Import) and it just sits there.  I can change anything on that screen for options, but it really is locked up.   I have to use Task Manager to end the task so that I can get back into Adobe Organizer.    Maybe there is some kind of incompatibility with Windows 8 I am not aware of?

    As you said "I am using this method as a bandaid, but this method will constantly copy all files (including old photos still on card) to a new folder.  This means that I have the same photo being copied from my cameras memory to multiple locations.  Not the best method (lots of clutter). "
    This is not so. Importing photos using Watched Folders doesn't copy your photos to any other location.
    Please empty your card and add 1-2 images to it. Now launch Photodownloader.exe from the location : C:\Program Files (x86)\Adobe\Elements 11 Organizer
    Post doing this, launch Organizer. Let's see if the import happens.
    Thanks
    Andaleeb

  • How can I import images from iphoto with the albums and folders?

    How can I import images from iphoto without losing the albums and folders I already created?

    In Organizer, you can choose File>get Photos and Videos>From iPhoto.
    Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
    Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
    Hope this information helps!
    regards,
    vaishali

  • Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
    Thank God Apple hasn't (yet) broken bash.

  • Photos won't import images from my Canon camera.  When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen.  MacbookPro 15" 2012, OSX Yosemite 10.10.3.

    Photos won't import images from my Canon camera.  When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen.  MacbookPro 15" 2012, OSX Yosemite 10.10.3.  Any suggestions?

    Solution discovered.  Faulty connector cable.  Tried a different one and it worked.

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • How do I import images from a Canon scanner on Photo Elements 12 using a Mac

    Hi
    I have purchase a new Mac with the 10.9 version and I am using Photo Elements 12.  I am trying to import images from my CanoScan 9000f scanner but I can't see the scanner in the Organizer, Files, Get Photos and Videos, there is no Scanner option.  But I can use my scanner using the Canon Sofware for the scanner.  Can you tell me what I have to do to be able to use my scanner directly on adobe Elements 12 ?
    Simon

    You do not use the 'Import' function under the File Menu to import P2 card content because the video content is still in its native form. For example, my Panasonic HPX 171 produces .MXF video files (amongst all the other files and folders within the overall heirarchy).
    In order to access the copied P2 information you have to Log & Transfer it, as if it were a camera plugged into the computer. This process then converts the MXF P2 files into a Quicktime format that the Final Cut application can read and work with.
    Take note that when archiving a P2 card as you did it is imperative that ALL the other files and folders are copied and saved. In other words, the entire 'CONTENTS' folder. It is this 'CONTENTS' folder that you navigate to within Log & Transfer when you want to import to FCP.

  • Importing images from an SD card to Lightroom 3.6

    I am a newbie to Lightroom and am having trouble importing images from an SD card. Can somebody run through the import procedure step by step for me please??

    Hank,
    http://tv.adobe.com/show/getting-started-with-adobe-photoshop-lightroom-3/
    Hal

  • Import Image from scanner to database Direct ..

    can any Colleagues help me ..
    how can i Import Image From Scanner directly
    if anyone can descuss code and how can i do that
    thank for all Colleagues .......

    You cannot.. unless you are prepared to get your hands dirty writing code to integrate a scanner API into Oracle.
    Oracle has a feature called extproc. This allows you to define external "procedures" - these procedures are for example shared object libraries (Linux/Unix) or dynamic link libraries (Windows). A scanner API will be typically implemented by its driver as a shared object/DLL. Which means it is callable from within PL/SQL.
    It may however not be usable - extproc does not support callbacks, does not own a window or process handle, and so on.
    In which case you may need to wrap the DLL into a custom DLL that implements callbacks. perhaps create a hidden window if a window handle is needed, and so on.
    In other words, this is not a trivial thing. You need to know more than just a bit about o/s side (systems) programming.
    You should also ask yourself why you want to do this. Architecturally wiring a scanner into Oracle via PL/SQL and an extproc interface make absolutely no sense at all.
    Especially since operator input/control is required to physically manage device... That is on the very opposite side of the Oracle server spectrum. That is clearly a client function to interact with such a device and not a server function.

  • Can I import images from DVD to my HDD through bridge (I have Win 7

    Hi,
    I'm using Win 7 (and also have Bridge on Mac OS X). I'd like to import images from DVD to my HDD through Adobe Bridge. But I can't find the option to import from DVD in Bridge (either in Win 7 or Mac). My DVD drive on my Win machine is external while I have the regular internal DVD drive on my Macbook Pro. I'm trying to import images from DVD to HDD through Bridge. Go through the first round of select/reject through Bridge and then take them to LR for further edits.
    I currently copy them from DVD drive to a USB pen drive. And then using the Bridge import dialog (when I plug in the USB again) copy them to my HDD. I do this becuase I also need to batch rename my files, add metadata and keywords during import. The simple copy/move function won't allow these additions and so I have to resort to this workaround of DVD to USB to HDD (thru Bridge). If I can import directly from DVD through bridge, it'll save me quite some time.
    Look forward to assistance pls.
    Thx,
    Chinmoy

    I feel a bit silly now. For 2 days I struggled and then posted my Q.
    After posting the Q, I figured it out in about 15 minutes.
    Insert DVD.
    Open Br
    Navigate to DVD
    Select all images
    Right Click - Batch Rename
    Choose Destination Path and New file name.
    And go!
    If you've had the same problem I did, hope this helps.

  • Moving images and importing images

    Hello everyone:
    I am new to this forum and am a new Aperture user.
    I am unable to move images from a project to an album within that project. When I try to do so the "+" cursor shows with the number of images I am trying to move, but when I open up the album there are no images in it.
    Also when I try to import images from my camera to a particular album, they only go into the album's project, not the album itself.
    Any help would be greatly appreciated.
    Thankyou.

    Welcome to the forum! The following questions might sound stupid, but bear with me...
    They are definitely regular Albums and not Smart Albums?
    The Albums don't have any search criteria set, such as minimum ratings?
    What happens when you select some images and hit Command-L (make a new Album from the selection)?
    Does the problem still occur after relaunching Aperture and/or restarting the computer?
    Is there a number visible next to the Album name (turn it on in the preferences if need be), and if so, does it still say '0'?
    Ian

  • I cannot import images from my camera directly into Elements Organizer

    I am trying to import images into Elements Organizer from my Canon EOS 6D, but it doesn't work properly. I am expecting the images to appear in the Elements Organizer, but the images are only imported onto disk. At the moment I have to re-import images from the disk location as a second step. How can I perform this in one step, as I have seen this in the tutorials?
    I am on a Mac using Yosemite using version 13 of Elements Organizer.

    There is no "into". LR and PS just reference your photos on the hard drive.
    When you import your photos "into" the LR catalog, LR can copy the images off your memory cards to the hard drive if you have not already copied them, but the photos are referenced by the LR catalog by the path and filename for the files.
    If you are having problems getting the images off the cards, what steps are you using and what error messages are you getting?

Maybe you are looking for