WLST and configToScript problems.....and problems....

Well I have been running into many different problems with the py that gets created by the configToScript.
The simplest of which is if I take a clean domain that has just been configured using the configuration wizard and just add a unix machine and generate the script, I cannot run the script successfully on a clean domain. A non-unix machine works OK but a unix machine barfs!
Here is the error:
configuring resource: UnixMachine/agentdev
UnixMachine with name 'agentdev' has been created successfully.
configuring resource: NodeManager/agentdev
Error occured while performing create : Cannot create MBean of type NodeManager. You can only create MBean's children to the current cmo of type: Domain.
After the unix machine is created in the script, it does not appear under the Machines for some reason!

Can you please attach the config.xml?
Thanks,
-satya
Well I have been running into many different problems
with the py that gets created by the configToScript.
The simplest of which is if I take a clean domain
that has just been configured using the configuration
wizard and just add a unix machine and generate the
script, I cannot run the script successfully on a
clean domain. A non-unix machine works OK but a unix
machine barfs!
Here is the error:
configuring resource: UnixMachine/agentdev
UnixMachine with name 'agentdev' has been created
successfully.
configuring resource: NodeManager/agentdev
Error occured while performing create : Cannot create
MBean of type NodeManager. You can only create
MBean's children to the current cmo of type: Domain.
After the unix machine is created in the script, it
does not appear under the Machines for some reason!

Similar Messages

WLST and configToScript

Some problems with configToScript (WLST).
I have a config.xml which I run configToScript on. It works fine and the message
I get at the end is that I should replace "ChangeME" to proper values. For my
JDBC Connection-pool, I replace it with a cleartext password. But what should
I replace it with for EmbeddedLDAP and SecurityConfiguration? If I run the script
without changing it I get this critical error:
<Jun 22, 2004 5:06:01 PM CEST> <Critical> <EmbeddedLDAP> <BEA-171517> <An error
occurred while attempting to get exclusive access to the embedded LDAP data files
directory - temp/myserver/ldap/ldapfiles. The exception thown is java.io.IOException:
Permission denied.>
Another problem I have when running the generated script is that it fails to create
a JMSDestinationKey:
Error occured while performing create : Cannot create MBean of type JMSDestinationKey.
You can only create MBean's children to the current cmo of type: Domain. Use dumpStack()
to view the error stack trace.
Even in interactive mode I have the same problem and the dumpStack() gives me
zero.
I'm running on Linux RedHat using WebLogic 8.1SP2.
Regards,
Martin

The problem with the IOException (Permission denied) is
solved. It arised when I tried to create the domain in my
ClearCase view. When doing the same thing in my home folder
I didn't have this problem.
How about creating a JMSDestinationKey? Anyone having a
solution for this?
//M
"Martin Gustavsson" <[email protected]> wrote:
>
>
>
Thanks for your quick response. I attach my config.xml.
//Martin
Satya Ghattu <[email protected]> wrote:
Hello Martin,
Martin Gustavsson wrote:
Some problems with configToScript (WLST).
I have a config.xml which I run configToScript on.
It works fine and the message I get at the end is that I
should replace "ChangeME" to proper values. For my
JDBC Connection-pool, I replace it with a cleartext password.
But what should I replace it with for EmbeddedLDAP and
SecurityConfiguration? If I run the script
without changing it I get this critical error:
<Jun 22, 2004 5:06:01 PM CEST> <Critical> <EmbeddedLDAP>
<BEA-171517><An error occurred while attempting to get
exclusive access to the embedded LDAP data files
directory - temp/myserver/ldap/ldapfiles. The exception thown
is java.io.IOException: Permission denied.>I haven't seen this myself and could not reproduce. It might
help if you remove the myResource.setCredential("changeME")
for the embedded ldap and security configuration from the
script. Server will assign a default value and you should be
all set.
Another problem I have when running the generated script is
that it fails to create a JMSDestinationKey:
Error occured while performing create : Cannot create MBean
of type JMSDestinationKey. You can only create MBean's
children to the current cmo of type: Domain. Use dumpStack()
to view the error stack trace.Could you please attach your config.xml?
Thanks,
-satya
Even in interactive mode I have the same problem and the
dumpStack() gives me zero.
I'm running on Linux RedHat using WebLogic 8.1SP2.
Regards,
Martin

Itunes wont open, encountered problem and send error report

Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

I have received my first mac from a designer friend who passed away recently. He had been having problems with crashing in Lion. His friend upgraded to Mountain Lion before his mac pro laptop, mid 2010, was sent to me. It has many problems and crashes

After sorting the material of my friends on the drive and creating a new user, I realized that the system was unusable with 30 or 40 crashes a day. I am a photoshop user and my friend had installed cs2 and upgraded to cs5. Actually everything was crashing and he had had the problems in Lion and they did not go away in Mountain Lion.
So my sense is the next best step is to uninstall and reinstall the operating system....but I'm entirely new to Mac though I quite good at problem solving on PC. I have been messing around trying to get Mac up for over a week now so am learning quickly but feel uncertain about the steps in installation and don't want to mess things further.
I have found this
https://discussions.apple.com/docs/DOC-3351
which seems useful.
I'm backing everything now to a usb drive, I have one copy in timemachine, but I need a clean install so I'm backing things manually as it's not so complicated my being a new user.
I have the original discs of Snow Leopard and a dmg file of Mountain Lion that were installed on this computer.
I hope I can find my friends Adobe id and password.....he does have a list of passwords, how can I check if they are correct.
Do I need to install Snow leopard from the original disks first and then update and then upgrade to Mountain Lion?
He upgraded first to Lion but I can't find that program to install, do I need it to get to Mountain Lion?
I don't have boot disks, does that matter?
What can I do about CS5 in a restore? I don't mind loosing other programs so much as this one.....I haven't seen the upgrades and only have CS2. What happens to all your programs...I guess they are just lost?
I haven't used mail, so I'm not worried about that.
Hope I can get some support with the process, any support will be valued that is at all related. Thank you

Merielsea wrote:
I am looking through this material, it's great. I'm wondering though, does command r work in #8 if my original disks where Snow Leopard?
Yes, when the operating system was upgraded to 10.7 then to 10.8, it 10.6 was replaced so those 10.6 disks are only good now for completely erasing the entire drive and reverting the machine back to 10.6
10.7 and 10.8 has a Recovery HD partiton on the boot drive.
https://support.apple.com/kb/HT4718
I have a mountain lion dmg file that was used to upgrade from Lion, would double clicking on this equal the same thing as reinstalling mountain lion over itself?
I wouldn't use this, as Apple is now changing things, so you need to reinstall 10.8 via the Recovery HD
I would prefer to keep CS5 photoshop
Not going to happen, if it's working now good for you. But according to Roaring Apps it's not working for 10.8. and it needs to be upgraded to CS6
If you revert the machine to 10.6 or 10.7, your going to erase CS5 and everything else.
Doing #20 would be a bit beyond me and I don't know another mac user so that I can work from their mac.
Why do you need another Mac users machine?
Print out the instructions.
Here is some more about secure erasing for a new owner
How do I securely delete data from the machine?
Installing OS X 10.8 again
https://support.apple.com/kb/HT4718
Does the reinstall have to go from Snow Leopard which was the base install, to lion then to mountain lion,
No, you erase and install 10.8
When Apple upgrades 10.6 to 10.7 then to 10.8, it's a complete operating system replacement, it's called a upgrade because it's still OS X but leaves all your files and most programs intact, none of the older operating system version remains.
Just like if you would upgrade Vista to Windows 7, or Windows 7 to Windows 7 Pro.
Can I install the mountain lion upgrade over a freshly installed Snow Leopard?
Yes, but it requires erasing the entire drive (including 10.8 Recovery HD) from the 10.6 disks, then installing 10.6, then Software Updating to 10.6.8, then buying 10.8 from the AppStore, then downloading it and installing it, then the machine will be 10.8
Or you can use the Recovery HD and just erase the Macintosh HD parittion then reinstall 10.8 that way for free.
How to reinstall just OS X or erase/install OS X
https://support.apple.com/kb/HT4718
See what is confusing you is there is a hidden Recovery HD partition on the boot drive, it can do all the things like a OS X install disk can do, erase the Macintosh HD partiton (where OS X, programs and files are) and install a new copy of OSX from Apple's servers so it reboots to a brand new machine again (no Cs5 though)
Instead of a boot disk, there is a two bootable partitions on the boot drive, one is Recovery HD and the other is Macintosh HD which boots into OS X.
SO your command r booting the operating system in Recovery HD to erase the other partition and reinstall OS X into from Apple's servers, got it.?
Your going to need your AppleID and password to reinstall OS X 10.8, all part of the new world order.

Steps to troubleshoot and get past common problems with Audition

When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
     This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
     Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
     Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
     Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
     Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
          * "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
          ** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
     To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
     Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
     OS X: launch /Applications/Utilities/Console.app   Clear the view, then launch Audition and note any error messages that appear.
     Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
     If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
     So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

Outlook 2016 getting crashed and throws an alert message as "microsoft outlook has encountered a problem and needs to close.

Hi,
Today i installed Microsoft Office 2016 preview for my Mac OS X 10.10 Yosemite. Word, Excel and Powerpoint applications are working without any problem. However, Outlook getting crashed and throws an alert message as "microsoft outlook has encountered a problem and needs to close.", it's happens always, when i launch outlook. please suggest me, how can i comet from this issue.
Thanks in advance,
Suresh Balakrishnan.

Go to the Microsoft site for help. These forums are not offering support for MS products, especially not for beta products.

Adobe Photoshop Lightroom has encountered a problem and needs to close. (ver 1.4.1)

I completed a search for this problem here and other forums, and found very useful information, however, I still need help. My laptop is an HP Pavillion dv1000, Intel Centrino, Windows XP, 1.24G of RAM; Camera is a Canon 5D, shooting JPEG only.
After a couple of weeks enjoying a vacation in the Caribbean, it was time to load all the new pics in the computer. I removed the card from my camera and using windows explorer, downloaded all pics in MyPictures folder. I created a new folder for this trip, and while I was there, I decided to reorganize several folders from previous trips. I renamed and moved folders around, deleted pictures, etc. (I believe that all the changes that I made created my problem.)
Once I finished all the changes with my folders, I launched Lightroom (ver 1.4.1) with the idea of synchronizing the folders and start working on my new pictures. After apx 8 seconds, I got the message: Adobe Photoshop Lightroom has encountered a problem and needs to close. We are sorry for the inconvenience.
After a google search, I found a lot of potential answers to my problem, including this one, which I tried:
"It might also be worth trying a temporary test catalog, just to see whether it's specific to that catalog. To do so, go to File menu > New Catalog and create a new catalog somewhere easy - Desktop perhaps - and just try importing a few photos into that test catalog and see if you can get it to freeze. I'm wondering if the catalog's been damaged slightly by that initial unexpected close, and if so, we'll see if we can get that sorted out for you."
I did exactly that (created a test catalog) and I don't get the error. I am not clear on what does that mean. Could you help me understand it? What do I need to do to use my old catalog? Is it damaged? How can I fix it? Did I loose all the work that I did in my previous pictures?
If I go back to my original catalog, I still get the error.
Thank you in advanced for your assistance.
Tony

Tony,
Here's something you might try:
Create a new, empty catalogue and try File->Import from catalog... and specify your broken one as input. With luck the damage will be left behind.
If that doesn't work, try deleting or renaming your preferences file. Look here for its location.
And if that doesn't work, try deleting or renaming your presets folder. See that same website for details.
Let us know how you make out.
Hal

Adobe Audition has encountered a problem and needs to close.

I have been using Audition 2.0 on this computer for quite some time and suddenly now when I open it, I get the cryptic error dialogue:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here."
When I click for more information, it's something useless like:
AppName: audition.exe AppVer: 2.0.5306.2 ModName: unknown
ModVer: 0.0.0.0 Offset: 65726168
Nothing on my computer has changed. There are no viruses. I have not added any new audio plug-ins. I am completely up to date with all critical Windows XP SP3 updates and none have been downloaded and installed recently anyway.
I searched the knowledgebase and found a document that suggesting many things to try. I tried them all, including running the Windows hard disk "check disk" tool with options to fix file system errors and recover bad sectors. I also defragmented the hard drive. Lastly, I completely uninstalled Audition, then manually deleted any remaining files, including registry entries as suggested in another knowledgebase article.
I then re-installed Audition 2.0 and it did exactly the same thing! This it maddening. Now it gets even more interesting. I discovered that if I start up the
Adobe ExtendScript Toolkit that Adobe Audition installed also, then try to launch Audition from the toolkit, IT STARTS CORRECTLY! I can then close the toolkit and use it like normal. Weird work-around.
What the heck could possibly be going on? Anyone have any ideas? I've attached the error log file that is generated by the error but I doubt it will be of much help.
Thanks!
Steve in Chicago

stevefoobar2: I may have found a solution for you.
I had the same thing happen to me today. I was using Audition 2 this morning without any problems. But this afternoon, it started giving me the exact same error with no apparent reason. Nothing on my system had changed.
So I uninstalled it and installed Audition 3 in its place. Audition 3 continued to have the same problem that Audition 2 had, so we can assume that this is not something that was changed between versions.
But my attention was brought to the fact that you and I are both running Windows XP SP3 fully up-to-date. So I thought I'd try seeing it from the angle of a problem with Windows instead of Audition, and see if I didn't get a better result -
First, I logged on to Windows as Administrator. This may or may not be required, but you'll probably want to do it just in case (you'll see what I mean later). At this point, Audition still crashed the same way when I opened it, so I moved on to my next troubleshooting strategy -
Instead of opening Audition directly, I right-clicked the Audition icon and selected "Run as..." This may seem odd since I was already logged in as Administrator, but it proved to be the solution in my case.
In the "Run As" diolog, there are two main options: run as current user, or run as another user.
Since I was already logged in as Administrator, I could safely select the first option (run as current user). But here's the catch: selecting the first option allowed me to UNcheck the box underneath that says "Protect my computer and data from unauthorized program activity" (see the attached picture)
Audition opened without any problems when I did this.
This makes me think that one of the Windows security features suddenly decided to block something that Audition was trying to do, crashing the program in the process. By turning off this security feature, the problem was solved. And I only had to do it once. Every time afterwards, Audition has opened without any problems when I simply open it from my desktop. Perhaps Windows now remembers not to block Audition in the future.
However, I have not restarted my computer yet, or logged off as Administrator. You may need to tweak this solution if you plan to do either of these things. You may end up having to "Run as" Audition every time you restart your computer or log off. You may even need to select the SECOND option, and run the program as Administrator with the appropriate password.
Anyway, this was the only post I could find on Adobe.com concerning this problem, so I thought I'd post my solution in case it helped someone else.

Adobe Captivate has encountered a problem and needs to close. We are sorry for the inconvenience.

I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application,
"Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience."
Can you explain how this issue can be resolve!?

Hi there,
On which operating system are you using Adobe Captivate?
Please recreate the preferences of Captivate, following is the location of Captivate Preferences:
Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 5 folder
Windows XP: C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 5 folder
Mac: /Users/[user name]/Library/Preferences/Adobe Captivate 5 folder
rename Captivate 5 to Captivate 5_old
and then try to launch Captivate 5
Thanks.

Adobe Acrobat has encountered a problem and needs to close.

Just recently when I launch Acrobat X after about 10 seconds I get this error, "Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience." I can create PDFs and open PDFs for 10 seconds. I've done a repair of Acrobat, I tried a new user account, and I disbled all my start up items. I still get the same error I have no clue what to do. Any suggestions?
J.R.

OK Will, I pressed ctrl + Shift and double clicked on a desktop icon of a file.pdf I had saved there and it opened and is still open. By not pressing ctrl + Shift the file opens then closes with that error in about10 seconds.
So now, what has that proved to us is the issue? Doesn't that load Acrobat without all the extensions?
This issue just started a few days ago and all I remember installing on my computer were some Window's updates.
J.R.

Adobe Reader has encountered a problem and needs to close.

When reading PDF attachments, I get the following: Adobe Reader has encountered a problem and needs to close. I have tried to remove Adobe Reader via Control Panel, Add or Remove Programs but that won't work. I get this: This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. I don't know how to do what is being asked. I have tried to download Adobe Reader again but get this when I do: Note: this application already installed.
I have Adobe Reader X (10.0.1) with an update installed on 2/19/2011. I have Windows XP SP3.
Anyone who can help me get Adobe Reader working correctly again or uninstalling it so I can reinstall.
Thanks for any help.

Thanks for the input. Did you remove Adobe Reader 10 first before you downloaded the older version? If you removed it, how did you do that? The add/remove programs in control panel won't let me remove it -- it says a patch package can't be opened.
Date: Mon, 9 May 2011 00:12:41 -0600
From: [email redacted by moderator]
To: [email redacted by moderator]
Subject: Adobe Reader Adobe Reader has encountered a problem and needs to close.
hi
i had also the same problem with that version.
so i download older version and this solved the problem.
>

Photoshop has encountered a problem and needs to close

I have had the cs4 software about three weeks, Everything has been running perfectly un til this morning. I was attempting to past an image to a vanishing point and got the hourglass/ spinning circle that is was working, then an error message about memory and photoshop needs to close. I closed all other programs and rebooted to attempt to correct whatever issue it had. Now whenever i try to use the program it lags badly with the simplest of tools(quick select) and then i get the photoshop has encountered a problem and needs to close. I am running windows 7, 3GB ram 2.75 usable, anthalon amd 2 dual core m300 2ghz 64 bit,
AMD M880G with ATI Mobility Radeon HD 4200
Can someone please help me figure out how to fix this.

Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9

Every time I start Firefox or do other functions I get the error message "getPlusPlus_Adobe_reg.exe has encountered a problem and needs to close."

It started after upgrading Adobe shockwave, and I have used the Adobe remove tool and reinstalled and I have removed and reinstalled Firefox and it continues,

I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

Error: adobe acrobat elements has encountered a problem and needs to close

When I right-click to Convert to PDF or Convert to PDF and EMail for .xls, .xlsx, .doc, .docx, .pptx, .ppt, .pub, and .igx items (what I've tried so far), I get the following error: "Adobe acrobat elements has encountered a problem and needs to close". It works fine on .bmp .tif, .txt, .htm, and .jpg (what I've tried so far). I am not having problems printing to Adobe to convert, nor am I having problems creating a PDF within a program, and I'm not having problems converting from IE. I am using Windows XP Professional, Microsoft 2007, and IE 7. My Adobe product is Adobe Acrobat X Pro Version 10.1.2. What can I do to resolve this problem? Thanks.

No, I don't have an older version. I did a search on my C drive for anything that has a name of Acrobat Elements and came up with the following: (I'm hoping you can see this)

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

WLST and configToScript problems.....and problems....

Similar Messages

Maybe you are looking for