Won't connect to the internet/wi-fi

I recently downloaded the new softwear for my playbook and since then it wont connect to wifi. It wont bridge with my bb cause o2 messed up my email and pin so i cannot use that anyway
but when im at home even when i enter the router pins and press the wps button still nothing ive tried re booting the router and re starting my play book but nothing
HELP

Try updating the router firmware. Then try setting it up to WPA or WPA2 Security with AES encription. You will then have to enter the network password. Try it and report back.

Similar Messages

  • My MacBook Pro won't connect to the Internet, but my phone and PC will.

    My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • MacBook Pro won't connect to the internet after standby

    Hallo all,
    I have the following strange problem with my macbook pro:
    - after going in stand by and returning in operating mode the mac won't connect to the internet, I have to follow the procedure in order to retry to connect but It does'not work. Go in network preferences, try to change the DNS, use and not use DHCP and so on but nothing change.
    - Mac is working in ethernet, I can see other macs and pcs
    - When I change the network to connect, same problem even if I turn off the mac.
    I have the same problem with Iphone !!!!
    I have linksys router and modem but I think that the reason could be a setting in mac.
    Anyone can help me???

    I tried re-installing Mountain Lion 10.8.3 but it didn´t help.
    Assuming your can access email ok ?
    First, install the OS X Mountain Lion Update v10.8.4 (Combo)
    Then restart your Mac. That will reinstall any missing system files.
    Then try Safari.

  • My iPod Touch 2nd generation won't connect to the Internet

    After restoring my iPod Touch 2nd gen to factory settings because that's what iTunes advised me to do after doing the iTunes update a week ago, my iPod won't connect to the internet anymore. I was able to connect to our wifi but it won't go to any website, to iTunes, etc. I'm 100% sure the problem isn't our wifi because I'm using it right now with my laptop so it's not the wireless problem. Before restoring my iPod to factory settings iti has always worked and I never had a problem connecting it. I tried restoring it again but it still didn't work. I already also reset our router but still no luck. I wish someone could help me asap!! Thank you.

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

    Hello, I hope somebody can help.
    I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
    I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
    When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
    But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
    I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
    What could the problem be?

    99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
    Ring your ISP and make doubly sure you have exactly the correct username and password.
    If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
    In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

  • My airport extreme shows a green light, but won't connect to the internet.

    I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now.  It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

    Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
    No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
    Start from a factory reset. No files are lost on the hard disk doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

  • My iPhone 5 won't connect to the Internet.

    I have a factory unlocked iPhone 5, and I had my regular-sized SIM cut to fit the iPhone 5, since the nano SIM is not available yet in my country (Venezuela). The SIM works, I get messages, calls, etc. But it won't connect to the internet unless I'm on wi-fi. I've tried in different places, with full 3G signal, but it doesn't work. The weird thing about this is that I get Whatsapp messages (and I can send them as well), I get notifications from Instagram and Twitter, but it won't let me, say, enter my Twitter profile, or load Instagram pictures. It won't load any kind of internet content, neither with Safari nor Chrome.
    The phone (or rather iOS 6) doesn't seem to have any option to edit the APN, so I researched a bit and found the iPhone Configuration Utility. I used it a couple of months before with an iPhone 3G to set an APN and it worked. Only this time, it wouldn't let me create and install a new profile on the iPhone 5. It would let me install the old profile I had for the Iphone 3G, which had the same APN settings I was trying to use now (both from the same carrier) but it didn't fix the internet issue. I also tried the Unlockit method, but it didn't work either.
    What bothers me is that I've seen in a few websites screencaps of the Mobile Data screen, and it shows an option to configurate the APN settings in the phone itself, but mine's missing it.
    I'd really appreciate if you could help me out, or at least give me a hint of what could be causing this. I've tried almost everything, and I've read a lot of posts here, but I haven't found anything useful. Thanks in advance.

    In addition to what ChrisJ4203 said about cellular data, check your carriers website, it may need you to enter APN settings to allow internet access over cellular.
    Also does normal telephone calling & SMS work? Disable wifi to avoid using iMessage as a test. If the SIM is damaged or blocked etc it may not work with cellular data, does the phone give you any error messages when powering on?
    Another thing to try is to back up to iTunes & check for updates to iOS - sometimes a carrier update can restore the cellular network settings.

  • Itunes 8 won't connect to the internet. Connection is live

    I recently upgraded to version 8 and now it won't connect to the internet. I ran diagnostics and my connection is ok but itunes won't connect. It says that the connection timed out but it pops that message up instantly so it doesn't even have a chance to connect or time out. Any help? I don't want to have to lose all my settings by uninstalling if I don't have to.

    The #1 cluprit for no iTunes store connection after an upgrade is Norton.
    Even though iTunes shows as being allowed in Norton, it really isn't for reasons we do not know. You have to go into Norton settings, take iTunes out, and put it back in the list. Also iTunes Helper. There are hundreds of posts about this in the itunes store forums.
    Here are Norton directions
    http://service1.symantec.com/SUPPORT/nip.nsf/0/7fb6e478e2a1abf78825708b00558625? OpenDocument&seg=hm&lg=en&ct=us

  • Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!!

    Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!! I Did all the regular modem diagnostics but that computer won't connect and it's a hard wire connection, not wireless (too far from the wireless signal). Is anyone else having this problem?

    Hello, might try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    IFor 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • TS1398 Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    You can't change it - just try aagain. 
    https://discussions.apple.com/index.jspa
    Where you find these options:
    Notebooks
    MacBook Pro
    MacBook Air
    iBook
    MacBook
    PowerBook

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

  • HT4628 My Mac Air OSX10.8.5 won't connect to the internet as it says it has a self assigned IP address and thus cannot connect to the internet. I can only connect to a network by manually typing in the configuration specs. Please help.

    My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!

    Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled.  If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

  • TS1398 my ipad is connected to my wifi network but won,t connect to the internet, i have tried resetting network settings but it still won't work.

    my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot

    Try restarting your WiFi router by removing power to it for 30 seconds.

Maybe you are looking for

  • Budget Exceeded but no Error message Assign more than allocated

    Hi Gurus, I am stuck in a situation where the Error Message BP603 while creating a PO for a wbs at level 2. IN cj30 , i found out that  Budget = 69500000 and assigned = 69950772 if i create a PO OF even .30 (thirty paisa) the budget exceeded amount =

  • "Budget Exceeded" error not appearing at the time of changing PR but appearing at the time of PO change.

    Dear All, At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing. List of steps: PR

  • Cannot update or restore iPod Touch

    My son has an iPod Touch with iOS 6.1.2 and he has forgotten his passcode. At the same time, his hard drive crashed, so his newly re-installed iTunes does not recognize the device without a passcode. Fortunately, we did sync the device on my MacBook

  • Editing expressions in non-development systems.

    Our first use of BRF+ met a large success among our business key users and  they are requesting now the maintenance of some decision tables. We therefore followed the guidelines of document "editing BRF+ component in non-development systems" and impl

  • Help remote wont pair with apple tv!

    I have the newest apple tv. I recently lost the remote and purchased a new one. I tried pairing the new one and it blinks 3 times the stops. Then it starts to blink non stop. what am i doing wrong?